Update 10/02/11:
For existing users of the ROM, flash the 2.2GB_NoCG_31_39.sbf (Link below). This will flash the rest of the ROM apart from the part that stops the ROM from being downgradable and system - Don't worry your ROM will be as it was before after flashing - you won't loose any data.
##CAN PEOPLE POST WHETHER THEY ARE HAVING GTALK/MARKET ISSUES PLEASE## Please also post if it is working ok for you
Back up after needing to sort out a few niggles and an issue with the rom including my Titanium backup license key. Now RC2.
Higgsy Modded 3.4.2 GB Froyo for Motorola Defy.
Fully working, no niggles ROM. Everything works. Its a blank canvas, All social networking blur stuff removed, some widgets, some other stuff.
Included:
Launcher Pro
Milestone Overclock
Titanium Backup
Widgetsoid2
Clockworkmod Recovery
Es File Explorer
Also:
Deodexed
Rooted/Busbox (Busybox installed in /system)
Over clock Script included with following freq/vsel 1000/52, 600/36, 300/26. (milestone overclock is not loaded as default - just go in and load module and set to apply on boot then forget about it)
Install process - this must be followed to the last letter - there is no variation so please don't ask.
If you have already followed the process to get onto a downgradable base, (i.e. you already flashed RC1, or, you followed the other thread Here then all you need to do is boot into clockworkmod, wipe data/cache and restore this. It will wipe everything again, sorry about that.
I never flashed a non downgradable .sbf before, such as 2.51 Eclair, or the GB/US Froyo, so can't vouch for whether it will work correctly on peoples devices that have done that, you should however just be able to flash the system/image if you've already got a 3.4.2 froyo base. If you have never either recieved the phone/flashed one of the undowngradable .sbfs, this process will ensure you keep you downgradibility.
Files Needed to complete This:
2.2 Chinese .sbf(Unzip the .sbf from the archive)
Higgsy_Modded_3.4.2_GB_Froyo_RC2 (Unzip and put folder in the sdcard/goapkrev/backup folder)
Superoneclick Root
Clockworkmod Recovery
2.2GB_NoGG_31_39.sbf(Unzip the .sbf from the archive)
1)Make a backup of all your apps with Titanium backup on your current ROM.
2)Boot into Stock recovery (Power On/Vol Down, then press bottom right hand corner of the screen when you see the warning sign) Then perform a data wipe.
3)Using RSD Lite flash the 2.2 Chinese ROM (Guide Here if you need it!)
4)Once the phone has rebooted, skip set up, root via superoneclick and then install clockworkmod recovery/apply.
5)Boot into Clockworkmod Recovery and wipe data/cache
6)Now got to backup/restore and restore the Higgsy_Modded_3.4.2_GB_Froyo.
6)Important! Once the restore is complete pull the battery, as you are reconnecting the battery hold volume up, so that it goes straight into bootloader.
7)Once in bootloader flash the 2.2GB_NoCG_31_39.sbf by RSD Lite
8)Once the above is completed it should reboot and you are done
PLEASE READ:
I don't recommend restoring settings via titanium backup, only apps/app data, in the past I have done this and found it problematic. I suggest to redo your settings manually.
If you want to use setvsel (as it now works fine with froyo) you need to remove the setscaling scripts I put in for overclock and also milestone overclock. Setscaling scripts are located: /system/xbin/setscaling.sh + /system/etc/install-recovery.sh
If you report a bug I need to know what roms /things you have flashed before, there are too many variables, most notably if you been on non downgradable roms
Enjoy!!!
Thanks go to:
Sorensiim - Hosting all my files
mcm_xyz - for the haptics fix
Bizzaboy - for info on updating media profiles, so improving video recording
Authors of all the apps included in here, donate or buy the full versions they are worth it!
Further updates I intend to release as update.zip's, looking at themes, bugfixes (even though there aren't any that I can find) etc etc...... Please don't pester me for these, I do it as a hobby and sometimes don't have time for days to do things.
Change log:
03/02/11
RC2 release
Removed my TI Backup license that I had inadvertently included
Removed various info from the data.img, that I believe could have been cuasing some of the niggly issues people were having.
01/02/11
RC1 Initial Release
fantastic work !!!! will try after i'm gone from work
+1 looking forward to trying after work today
how to edit the overclock script ?
my phone could run on [email protected] , [email protected], [email protected] , [email protected] very stable
008325 said:
how to edit the overclock script ?
my phone could run on [email protected] , [email protected], [email protected] , [email protected] very stable
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=880851
Hey higgsy, i didn't flash your ROM yet but i have a question
At the moment I have a Defy which is on 2.34, and I didn't upgrade yet because i NEED a downgradable ROM (for warranty reasons, the DE version is still at 2.21)
now thanks to your tutorial, i can upgrade to froyo while being able to downgrade to the official 2.21 if needed, but here's my question:
what happens if i nand restore a different ROM based on the 3.42 UK rom (like HandlerExploit's upcoming Vanilla version), will I still be able to downgrade?
(e.g. does restoring a backup WITHOUT flashing a new sbf make your device undowngradable?)
yozgatg said:
Hey higgsy, i didn't flash your ROM yet but i have a question
At the moment I have a Defy which is on 2.34, and I didn't upgrade yet because i NEED a downgradable ROM (for warranty reasons, the DE version is still at 2.21)
now thanks to your tutorial, i can upgrade to froyo while being able to downgrade to the official 2.21 if needed, but here's my question:
what happens if i nand restore a different ROM based on the 3.42 UK rom (like HandlerExploit's upcoming Vanilla version), will I still be able to downgrade?
(e.g. does restoring a backup WITHOUT flashing a new sbf make your device undowngradable?)
Click to expand...
Click to collapse
Its flashing the sbf what locks you out of being undowngradable. simply restoring a system and/or data partition should not cause an issue. Ask the authors of the other ROMs, I can't comment on what effect there releases will have on your phone.
could we have some screens?
fabianowerner said:
could we have some screens?
Click to expand...
Click to collapse
Screens are pointless mate, its a blank canvas there is no theming etc. the screens in my 2.2 CN thread are pretty much the same
Looks nice,
so far running very smooth every thing ive tested and works well as far as i can tell!!
although I cannot got into recovery just get a black screen
Overall very nice cheers!!
Duh! I just flashed the uk rom posted by iaio72. I just realize it is not deodexed and i *must* (must?) replace that statusbar. If i understand correctly, it is not possible to theme odexed roms, right? Do you think i can just flash your system image or may this raise some issues ?
Higgsy, first of all thanks you very much for this rom, but I have a "little" problem. With a clean nandroid and with your, I have problems with gmail notification and "google talk connection problem" (don't know how is exactly writen, I have in another language)
what can be?
Edit: Just say: "Google Talk failed to login. If this is a google Apps account, confirm that Chat service is enabled for this account."
add.thebad said:
I cannot got into recovery just get a black screen.
Click to expand...
Click to collapse
Just a blind guess: you did disable usb debugging before booting into recovery, right? This is mandatory for froyo (don't know why though).
Another, market is not the new.
Edit: Now is up to date, it just didn't want to update, or install app. Removed data and restarted. Somebody know something about the other issue?
If I already followed the safe upgrade to 3.4.2, it should be good enough to simply do a nandroid restore and flash devtree again, right? I so want to get rid of blur
Camera not working!
Everything run smooth but the camera is not working.
if i'm already on 2.51 (it came stock), how do I go about flashing this froyo release?
Can anyone help? thanks.
Hi, Thanks for the good work
I've the same problem with Talk, authentification problem...
I've another problem with the LED from camera doesn't work.
Any idea?
gratias mate, for your work.
I had the blur-UK ROM installed, so I was able to restore your system.img only. Non of my data got lost and it's running smooth on your deblured version
Related
Hi!
First off, if I have posted in the wrong place, I am sorry and if necessary please move to relevant location!
Right, I have had a major problem with my HTC Desire, I spent all day & night yesterday trying to fix!
I rebooted the device as it was running short of memory, then phone just got stuck on the white HTC boot screen & wouldnt move from that, so I restored a backup of the phone using Nandroid, but I had the same result, fine I thought, Id just download a RUU to reflash the device, this didnt work and came up with errors, BUT what I did manage to do is take the rom.zip and make a new ROM in Cygwin which flashed perfectly and I ended up with a stock 2.2 and all seemed to be back to normal, so I then tried to restore a backup again, but same problem, white HTC screen so I have came to the conclusion that I will have to TRY to re-create my old ROM & settings using this stock ROM!
So far I have managed to root the ROM & add everything that my old ROM had (was using the latest Lee Droid ROM - man big respect to you for what you do!!) but there are a few things missing which I do not know about and this is where I need all your help with!
Below are the bits I desperately need including with the ROM (my phone wont install any other ROMS other than the stock 2.2 I said earlier) I am not expecting the members here to do it all for me, BUT if you could point me in the right direction to either the posts with directions for what I need or other places where I can find the bits & how to do it!
*** Wireless N support (my router is N & so are the other wireless devices)
*** An overclocked kernel (such as Lee Droid's V2.2e_A2SD ROM)
*** The ability to wake up & unlock the phone with the optical thumb trackpad
*** The reboot option when long press on unlock button (ideally the nice, clear menu that includes Hibernate from the new HD ROMS)
*** Branding & naming the ROM (as Lee Droid does on his ROMS)
*** Custom wallpapers instead of stock wallpapers
I am sorry for the long post, but I really NEED this completed ASAP and I know with all your help, I can do it!
Also, I am making a simple program on my PC to custom ROMS (add & delete apps, alarms, ringtones & notifications etc) which I will upload for the community when it has been completed & working 100%!
Thanks in advance & I hope that you can find it in your hearts to help me!
Arty
I don't think nandroid restores the kernel. After you do a restore with it, you need to flash a kernel that is compatible with the rom being restored.
Personally, when I restore I backup on my phone, I reinstall the rom and then just restore /data from my nandroid backup.
Thanks for your fast reply DiGi760, however I think you misunderstand!
I need a kernel that supports overclocking the CPU as I use SetCPU and so far its just the standard 998MHZ I can set the clock to, where I would like it to be higher, like 1038MHZ or whatever it is
Your backup copy is broken. You can't "really" recover from this. Just reflash 2.2 and update it to whatever you had before and start over. You may be able to manually pull stuff from your SD card where the nandroid backup was written to but that would be a tedious amount of work.
Thanks Syn Ack, why would the backup AND the info on my phone corrupt at the same time?
I do actually have a copy of the Clockwork folder from memory card stored onto my PC, but none of the backups will restore (I have a total of 10 going back a few months) but none will restore, not even any other ROMS that Ive downloaded with ROM Manager or from forums will install to it, only the 2.2 ROM that came with the RUU file I downloaded.
An update on my progress of making my new ROM:
I have managed to get the Reboot menu integrated into my ROM, so now I am just stuck on the following:
Wireless N support
Overclocked Kernel
Unlock the phone with trackpad
Branding & naming
Custom wallpapers
so if anybody can help me I'd really appreciate it!
Wow, its been over a week and no replies, why cant anybody see it in themselves to help? after all, you all was newbies once too, just remember how you felt when nobody answered a post you *REALLY* needed help with!!!
Just saying
Gees thanks for nothing u lot!!!!
Hi All, This is an All-in-one thread with available roms (for both Eclair and GOT 2.2.1 leak), how to root + apply roms for GOT 2.2.1 Leak, petitions, projects, etc. Please read everything carefully and good luck
(SCROLL DOWN FOR LIST OF ROMS, PETITIONS, ETC!)
Disclaimer: I am not responsible if anything happens to your device. Please read the whole text over before applying roms. Use at your own risk.
It is strongly recommended that you wipe data + cache + dlavik (may not be spelled right) cache before applying ANY roms.
Also, make sure to have vulnerable recovery and root installed (I do not think you need vulnerable recovery for 2.1 BUT ROOT IS NEEDED) However it is acquired, root is needed.
Also, MAKE SURE YOU NANDROID BACKUP BEFORE YOU DO ANYTHING TO YOUR DEVICE!!! GOOD LUCK
How-To Root (On GOT 2.2.1) (All the files were taken straight from the GOT homepage)
Note: Please, make sure your device is fully charged before you attempt to do this!
The following files all have vulnerable recovery pre-installed:
DACH – GERMANY :
http://www.multiupload.com/G9PP7JN78C
DACH AUSTRIA :
http://www.multiupload.com/P8DDXCWW03
RETAIL EUROPE (RTEU) :
http://www.multiupload.com/6X7H39HGCG
FRANCE RETAIL :
http://www.multiupload.com/PK28LXE4SE
ITALY WIND :
http://www.multiupload.com/3KYMZNRZW2
UK RETAIL (RTUK) :
http://www.multiupload.com/60B78PRKNY
TELUS CANADA :
http://www.multiupload.com/5S2CYGP3VW
Download the file according to where you live.
Now, you must install RSD Lite (taken from http://tinyurl.com/3xg5xwj):
http://www.megaupload.com/?d=N1MPCX1U
mirror: http://www.multiupload.com/jw25luksh2 (not tested by me, found from here: http://forum.xda-developers.com/showthread.php?t=983516 thanks nagi603 and eXtink please report in comments if it works!)
I'm pretty sure you may have to install the drivers for your device, a simple google may help. - This may be required.
Next, open RSD Lite and click the "..." and navigate to the file you have downloaded above.
Next, plug in your phone in bootloader mode. To do this, turn your phone off, then hold the power button, the top volume button and the camera button at the same time. Then you should enter bootloader mode. It should say Bootloader at the top. Make sure, at the bottom it says "Battery OK". Please, make sure you have fully charged your device! Then click the start button. Wait for a while.
Once its booted, plug the device into your computer via usb, then go to memory card access. Then go to the root of the sd card (on your computer)
Now, download and OR (For this tutorial, I will be using Androidani 3.3, the link is a the bottom).
In the rar file there should be two things. One should be a folder named "OpenRecovery" (Note: Make sure thats the file name!) and an update.zip file. Next, put the OpenRecovery folder in the root of your sd card. (If you have never used an OR before, you should NOT have to replace anything!) Also put the update.zip in the root of your sd card.
Next, turn the phone off. Now, while turning your phone on, (THIS MAY NOT WORK FOR SOME PEOPLE) hold the camera and power button until you see the M logo, then release the power button but keep holding the camera button. You should see a caution sign. Next, click the up button (on the volume rocker) and camera button after. Keep trying it if it doesn't take you to a menu. Next, slide out your keyboard then using the d-pad navigate to "apply update.zip" and click the middle button. Once its applied, you should have a bigger, longer menu. Then navigate to root phone in the new menu. Once this is done, you should be rooted.
How to apply custom roms:
Now that you have root and an OR (Open Recovery), turn on your phone and plug it into your computer in memory card access. (Or, you can navigate to the OR [By above method] and click memory card access, it should be the first or second option in the menu)
Once you are at the root of your sd card, go to OpenRecovery folder, then click updates. After that, put a rom that is an UPDATE (Some roms are not, some can be nandroid backups. It should specify on thread) For example, as of now, cyanogen mod by kabaldan is an update.
If the rom is a nandroid backup (Again, it should specify on thread) (For example, as of now, MotoFroyoSense is a nandroid backup), then navigate to the root folder then go to nandroid folder and click one of the folders within the nandroid folder (any, it doesn't matter) and put the nandroid backup (AS A FOLDER, not rar) and finally, turn off your phone.
Then navigate back to the OpenRecovery menu and click updates (if its an update rom) and click it, or if its a nandroid, navigate to nandroid then nandroid restore, and restore the rom.
Remember to wipe before you apply any roms!
Now, as an addition, here are all the roms available for milestone! They can be found in a cleaner thread: http://forum.xda-developers.com/showthread.php?p=11593755#post11593755
2.2.1 (GOT) Leak roms:
The Froyo Mod by 89luca89:
http://forum.xda-developers.com/showthread.php?t=815595
Cyanogen Mod (6.1.2 I think) by the famous kabaldan:
http://forum.xda-developers.com/showthread.php?t=784750
Edit: There are no more updates for cyanogen mod 6 for our milestones from kabaldan (nadlabak)
Edit2: Updates for Cyanogen Mod 6 can be found here: http://forum.xda-developers.com/showthread.php?t=1155454 by milaq
Shadowmod-br by Edgard Castro:
http://forum.xda-developers.com/showthread.php?t=930275
iceandfire by iceandfire:
http://forum.xda-developers.com/showthread.php?t=886471
MIUI rom by Miui-Team:
www.miui.com
Lalit Miui mod:
http://forum.xda-developers.com/showthread.php?t=850276
For more Miui info, you can go to miui-dev.com (Run by Markhuk)
HO!NO! CM6 mod by HO!NO! (As of now, this must be applied over CM6 as nandroid. Please ensure that the version of HO!NO! complies with whichever version of CM6 you are using. Also, if market is not functioning properly, there is a method to fix on the thread):
http://forum.xda-developers.com/showthread.php?t=849676
There is also a rom called Cronos Froyo but it is not on these forums anymore. A simple google search can probably get you to the right place.
Gingerbread roms for GOT 2.2.1
These can be applied with the GOT 2.2.1 sbf (YOU MUST HAVE ROOT!)
Cyanogen Mod 7 (nightly, so its probably beta) kabaldan:
http://forum.xda-developers.com/showthread.php?t=941346
ShadowMOD-BR v2.3.2 by edgardcastro:
http://forum.xda-developers.com/showthread.php?t=939555
Eclair (2.1) roms
Telus Lite V5 -- THE Fastest Eclair mod by xslntx :
http://forum.xda-developers.com/showthread.php?t=717377
I think these are compatible with both 2.2.1 (GOT leak) and 2.1
MotoFroyoSense by Dexter Picard. This is a Desire Z port to milestone by the great Dexter Picard. (I can confirm this working on 2.2.1 GOT leak using Androidani 3.3 and wiping dlavik cache + cache after nandroid update. I DO NOT THINK YOU CAN WIPE DATA SO YOU MUST NANDROID BACKUP BEFORE YOU INSTALL):
http://forum.xda-developers.com/showthread.php?t=786316
HTC 2.1 Senseui Mod for Milestone by Dexter Picard. This is a 2.1 sense port from Desire ( I think). (This can be confirmed working for me on GOT 2.2.1 leak using androidani 3.3 and wiping dlavik cache and cache after nandroid backup. )
Other Roms that I am not sure if are compatible with 2.1 or 2.2.1 (GOT LEAK)
MotoBlur for Milestone by Dexter Picard:
http://forum.xda-developers.com/showthread.php?t=755785
Fast-Light-Rom by HTCDevil
http://forum.xda-developers.com/showthread.php?t=722304
Eclair Mod by 89luca89:
http://forum.xda-developers.com/showthread.php?t=772031
Now for avaiable leaks so far(2.2)(Froyo)
Jan.25/10 Leak 2.2.1 (I THINK) : http://forum.xda-developers.com/showthread.php?t=929646
Older leak : VIVO: http://forum.xda-developers.com/showthread.php?t=913938
Oldest leak: GOT 2.2.1:
http://groupoften.wordpress.com/2010/10/16/g-o-t-2-2-1-released/
Other (Supposed) European 2.2.1 leak:
http://forum.xda-developers.com/showthread.php?t=929799
There is also a project for brute forcing the milestone keys!:
http://forum.xda-developers.com/showthread.php?t=883376
Open Recoveries:
Androidani 3.3 by Azhad:
http://forum.xda-developers.com/showthread.php?t=796679
Petitions:
Petition to get bootloader free + 2.3 on milestone by Wing_Zero85 :
http://forum.xda-developers.com/showthread.php?t=876903
____________________________________________________________
Thanks to all the developers and all the members that made this happen. I want to say a specific thanks to sileshn for unintentionally inspiring me to make this thread
Please press the thanks button if I helped. If a mod thinks this should be stickied, please do
Good work. A newbie can find out what he wants and where to go from this thread.
Miui ROM original site is miui.com ( Chinese Developers ). There is also miui-dev.com ( Run by Markhuk ). Then there is Lalit's MOD.
I would suggest to also add a section that deals with HOW TO , like how to nandroid / how to get your phone to stock etc.
There is the european froyo leak, its in the general forum.
Thanks
Sent from my Milestone using XDA App
Edit: link
http://forum.xda-developers.com/showthread.php?t=929799
by zozul
Shadowmod-BR by Edgard Castro (I think his username here is edgardcastro as well)
MIUI by MIUI-Team
Sent from my A853 using Tapatalk
Cronos hs advance to v'18.1 with latest kernal. Blog unfortunately off line for a few days.
Regards, PK
sileshn said:
I would suggest to also add a section that deals with HOW TO , like how to nandroid / how to get your phone to stock etc.
Click to expand...
Click to collapse
After about an hour of typing, I have posted the How-To. I have also realized there is another thread that is already stickied for this -.-. I have also included how to apply roms for both nandroid and update.zip files.
Ah nice initiative mohit!
OT: btw ViKiD here
you are rocking on plenty of Android forums i see! Good job bro!
bloodhawk said:
Ah nice initiative mohit!
OT: btw ViKiD here
you are rocking on plenty of Android forums i see! Good job bro!
Click to expand...
Click to collapse
Thanks man
Very nice work, congratulations.
Now, if a mod could just give this some spit & stick it up top.
Sent from my Milestone
motorator said:
Now, if a mod could just give this some spit & stick it up top.
Sent from my Milestone
Click to expand...
Click to collapse
Thanks and I have already requested a mod to sticky this thread.
I read somewhere, someone put a file with all the moto apps, does anyone knows where?
What does one has to do to get the MotoCam working on any rom?
I know i've asked this in another thread, but i wanna know! I prefer that cam!
luishawk said:
What does one has to do to get the MotoCam working on any rom?
I know i've asked this in another thread, but i wanna know! I prefer that cam!
Click to expand...
Click to collapse
Hi, it may be possible to extract to other roms. However, it is included in this: http://forum.xda-developers.com/showthread.php?t=929646. For best results, I would use the nandroid backup created by sileshn
Edit: Honestly, I prefer that camera over the one that is found in Cyanogen 6, FroyoMod, etc. I too would like to find out if someone can use this camera instead of the one found in other roms.
i found that very helpful, great job!
a section about overclock would be great!
TheKawa said:
i found that very helpful, great job!
a section about overclock would be great!
Click to expand...
Click to collapse
Thanks, and please press the thanks button. Also, to overclock, just go to google, search milestone overclock and find the google project one and download the apk. YOU MUST HAVE ROOT!! Good luck Or, for more experienced members, just use the option in Androidani 3.3 (There should be one)
Just a question. I live in South Africa, and I got my Milestone here. If I check my version with the motorola software update application it just tells me I have a Motorola Global phone. So which vulnerable recovery will I need to download? Also, how will this affect my baseband versions etc?
I am currently running the latest stock Eclair on my Milestone, and found this thread as the most thorough instructions available. I am new to android flashing, but not new to phone flashing.
So, basically in order to upgrade to the Cyanogen mod, i would need:
1. Download this for vulnerable recovery (same as open recovery?) UK RETAIL (RTUK)
2. Install it via RSD Lite
3. Wipe everything in the data + cache + dlavik folders on my phone. (do I have to wipe the SD card at any point?)
4. Install Cyanogen Mod via open recovery
Did I get this right? Did i miss something? Thanks!
Is there are a step I should pay extra attention to in order to not screw up my phone?
Thanks and sorry for being such a newb.
FrostyWolf359 said:
Just a question. I live in South Africa, and I got my Milestone here. If I check my version with the motorola software update application it just tells me I have a Motorola Global phone. So which vulnerable recovery will I need to download? Also, how will this affect my baseband versions etc?
Click to expand...
Click to collapse
If I were you, I would update to GOT 2.2.1 as the vulnerable recovery is already there. You would just flash using rsd lite (link in first post) I am not sure if any drivers were required. To be on the safe side, I would google (34 bit or 64 bit) windows xp, vista or 7 motorola milestone drivers depending on which one you have. I had drivers when I did this. I will try to find links when I have time. I would flash the according GOT 2.2.1 leak and use androidani 3.3 OR to I install basebands if they are the wrong one. It is really eqsy to root and install roms on milestone with this. I would just use my tutorial to install got 2.2.1 and install cyanogen mod 6.1.2 (best experience for me).
Good luck
Sent from my Milestone using XDA App
This is an extremely simple ROM modification to the standard Advent Vega 1.10 system image that only alters a couple of things. These are as follows:
/system partition size increased from 128mb to 155mb. (The reason for this will be explained below)
su and SuperUser.apk added - You can use root apps as standard now.
ClockworkMod Recovery built-in.
Added Pauls simple recovery reboot app to get into CWM recovery.
That's all! No google apps, nothing else, just these simple changes. This isn't intended to be used as an everyday ROM (although there is no reason why you couldn't).
The main reason for this, is to be used as ROM base for VegaComb (and any other ROM you wish to use). I have been struggling with the Vega's default partition sizes while trying to port Honeycomb, and rather than spending tons of time trying to make stuff way smaller than it was ever intended to be, this seems like the better option.
So, flash this in nVflash recovery mode (exactly the same as the stock 1.10 image) and off you go. Done. No need to do anything else. You can use this base with any ROM, the ONLY downside is that 30mb of storage has been re-allocated from /data to /system, which most people won't even notice.
ALL future versions of VegaComb will require that you use this modded system image as a base (as they will require more than 125mb of /system space). To return your partitions back to the way they were, just re-flash the stock 1.10 image from www.myadventvega.co.uk (this is the ONLY way to restore your partition sizes, restoring from a Nandroid backup will NOT change your partition sizes back). You DON'T have to return to stock when you want to switch from using VegaComb, all other ROMs should work perfectly fine on top of this base, including Corvus5 and CM7.
Also, it's handy to have this in case you brick your Vega as CWM is pre-installed
AS ALWAYS MAKE SURE YOU NANDROID BACKUP BEFORE FLASHING ANYTHING!
Download ModdedStock_1.10 v2 Here!
Woo Hoo, good sign for things to come
Good work, Love the idea of a bigger /system..saves a lot of messing around moving apps to /data. Cheers. Paul
Just can't get this to install :-(
Keeps coming up with unknown device found!!
Ooops, forgot to plug the charger in.........sorry :-(
I use ubuntu will this work through wine or would i be better off trying to borrow a windows MC
Flash without usb cable?
Is there a way to flash this ROM without using the USB cable and recovery mode since my VPAD10s is giving a huge pain with windows 7 and the driver so I can not make it work.
Is there a version to be used with rom manager?
Thanks guys.
You need to use your PC because this ROM changes the partition sizes in the internal memory, and you need a PC program (nvflash) for that purpose.
Damn! thanks Logseman, I will keep on trying to get my tablet recognized over w7 can´t believe it´s so hard to make it work. wish me luck
Hope over to the Modaco Vega forum and search for YAUDIG and AUDI. They'll get the drivers installed for you.
simonta said:
Hope over to the Modaco Vega forum and search for YAUDIG and AUDI. They'll get the drivers installed for you.
Click to expand...
Click to collapse
Thanks simonta, already tried AUDI´s soft but no luck.
I´m starting to think that the issue might be with my pc/w7.
Great stuff!
Rgds
Lok
Hi:
Currently using vegacomb 0.6, i want to nandroid backup, install the new Rom base, then nandroid restore, and then upgrade to vegacomb 0.7 via the upgrade patch, in order not to loose all my settings.
So I would like to do a Nandroid backup, but being Android illiterate, i havent found how to do it in vegacomb 0.7.
Another question is , as I have moved most apps to SD, if there would be any problem regarding the base rom change and nandroid bacup-restore
Thanks for any hint/pointer
Which gapps should I use it for this built?
Zebwen said:
This is an extremely simple ROM modification to the standard Advent Vega 1.10 system image that only alters a couple of things. These are as follows:
/system partition size increased from 128mb to 155mb. (The reason for this will be explained below)
su and SuperUser.apk added - You can use root apps as standard now.
ClockworkMod Recovery built-in.
Added Pauls simple recovery reboot app to get into CWM recovery.
That's all! No google apps, nothing else, just these simple changes. This isn't intended to be used as an everyday ROM (although there is no reason why you couldn't).
The main reason for this, is to be used as ROM base for VegaComb (and any other ROM you wish to use). I have been struggling with the Vega's default partition sizes while trying to port Honeycomb, and rather than spending tons of time trying to make stuff way smaller than it was ever intended to be, this seems like the better option.
So, flash this in nVflash recovery mode (exactly the same as the stock 1.10 image) and off you go. Done. No need to do anything else. You can use this base with any ROM, the ONLY downside is that 30mb of storage has been re-allocated from /data to /system, which most people won't even notice.
ALL future versions of VegaComb will require that you use this modded system image as a base (as they will require more than 125mb of /system space). To return your partitions back to the way they were, just re-flash the stock 1.10 image from www.myadventvega.co.uk (this is the ONLY way to restore your partition sizes, restoring from a Nandroid backup will NOT change your partition sizes back). You DON'T have to return to stock when you want to switch from using VegaComb, all other ROMs should work perfectly fine on top of this base, including Corvus5 and CM7.
Also, it's handy to have this in case you brick your Vega as CWM is pre-installed
AS ALWAYS MAKE SURE YOU NANDROID BACKUP BEFORE FLASHING ANYTHING!
Download ModdedStock_1.10 v2 Here!
Click to expand...
Click to collapse
Thanks. one questions. Which gapps should I use for this built?
Thanks again.
hi, can i flashed this rom using CWM?
No, you can only flash it using a pc.
@all
Can someone please tell me how to use the nvflash, cause i'm clueless. I've searched using google but no luck, even on YouTube. I've downloaded nvflash but I can't work it. It keeps telling me about the drivers, although I installed the drivers. Any help would be great.
Thank you in advance.
jayk32 said:
@all
Can someone please tell me how to use the nvflash, cause i'm clueless. I've searched using google but no luck, even on YouTube. I've downloaded nvflash but I can't work it. It keeps telling me about the drivers, although I installed the drivers. Any help would be great.
Thank you in advance.
Click to expand...
Click to collapse
Hi
Switch off your Vega.
Connect it to the PC with the USB Cable.
Hold the power button on the Vega for 2 secs
Hold the back button while still holding the power button for a further 2 secs.
Release the power button but keep holding the back button for a further 2 secs.
You should now have a black screen and the Vega should be recognized on your PC (check in Control panel under USB for Nvidia Harmony or Shuttle)
The above assumes that you have installed the drivers.
Then open Modded Stock v1 or 2 which you should have already downloaded to the PC and it will install on the Vega (Vega will show NV Flash mopde across the top of the screen)
Once Modded stock is installed go to the apps menu and the recovery app is there. If you have already downloaded and put on your SD Card, the Vegacomb 9n Rom run the recovery and it will put you into CWM.
Wipe data, cache and in advanced the Dalvik cache.
Then select install from SD card and select the Rom and it will install.
If you continue to have problems Google Vegatools 4.1 and download and install
and it can do all the hard work.
Hope this helps
Stransky
Hi guys, sorry to hijack the thread an take it slightly off course but........
Buy flashing this stock modded rom, will it reset my touch screen issues? Read that its a pretty common problem.
I've tried the fix at modaco, and it works.......for a very brief period, then back to just half of my landscape screen being recognized?
I've only had my Vega a week, can any other of you more experianced fellows point me towards a fix? It would be much appreciated.
Sent from my VegaComb using xda premium
Thanks for a awesome rom.One questions,having problems with the sensor.Is there a simple solution to this?i have wiped dalvic cache but didnt help.I want to play games like NFS Shift and ather other games with sensor abilities.
Why not use Custom MTD ?
http://forum.xda-developers.com/showthread.php?t=717874
I've got some questions regarding the install documentation of Simply Honey 5.1 Revolution for SGS ROM
Install Instructions Coming From Froyo OR ECLAIR(CM7/MIUI ODIN TO STOCK FIRST)
First Question regarding CM7 - Does this include CM7.1 as well? The example outside the parenthesis says Froyo or Eclair - CM7 is GB so this is not clear
- 1. Disable any Lagfix.
- 2.Download - xxx LINK REMOVED xxx This is the light version with hardly any apps and only one keyboard and 4 lock screens.
- 3. Flash via ODIN. USE 512PIT FILE.
- 4. Let phone boot. Wait 15 minutes and reboot.
- 5. Enjoy. You may now proceed to the MediumOR Large.
What is the difference between medium and large? Where are these files? I see a Light and Full but nothing else.
[/SIZE]
Install Instructions
Coming from Any Gingerbread Rom (If bootloaders aren't installed or you have trouble follow steps above.)
CM7 issue listed above. Any GB rom sounds like any - including CM7 this adds to the confusion of what will/won't work here.
1. You must first be running a Gingerbread rom (Doesn't matter Lindroid, Rainbows, your cousins top secret GB rom.) If you are not then please follow instructions above.
2. Place SimplyHoney5Beta1.zip on your SD card
Filename is out of date. Please link new file or list correct filename. If the ROM is out of Beta, the filename in the instructsions should reflect this.
3. Use rom manager or flash through recovery.
4. Let phone boot. Wait 15 minutes and reboot.
5. Enjoy
The new script is wipe for who come from SH <3.3 and from Froyo/GB!
It doesn't do wipe if you're running SH 3.5+ ROMs! Very Simple and automatic!
I've called it the "Anti-Noob" Script!
ONLY FOR CWM VERSIONS!! ODIN VERSIONS ALWAYS DO WIPE!!
Downloads CWM Full Roms
Simply Honey 5.1 Final
Light: xxx LINK REMOVED xxx 5 Locks Screens/ Modify Power Control Menu Options
Full: xxx LINK REMOVED xxx 10 Lock Screens
What is the purpose of Update1? Should this be flashed after Full? Is it flashed through CWM recovery? Some additional information here might be helpful. It is linked but no indication of why or when one would use it.
- Update1 - Gallery3D, Polaris Office, SNS Account -
xxx LINK REMOVED xxx
Is this section below a second set of instructions - you seem to list a If you have problems section above; however this one is more comprehensive. I'm not sure which one to follow if I have problems.
HOW TO
The anti-noob install script is a double edge sword so to speak. On one hand it is convinient as it doesn't do a wipe install if already on Simply Honey 3.5 and up. On the other some data needs to occasionally be wiped. That said if you experience ANY problem please follow the steps below.
1. Force Close of certain apps...go to settings/applications/manage applications/all and clear data of the offending app.
If that doesn't work then use Tiatnium backup to wipe data and uninstall the app (as long as it's not a system app such as phone or contacts or settings, you get the picture. Now you are free to re-install the app.)
2. The next step is to try and re-install the rom. Boot into recovery and select install from SD. After it's done and you reboot give it the 15 minutes. Now try again to recreate the original problem.
3. If the problem persists then boot recovery and wipe data factory reset and re-install the rom.
4. Problem still there then ODIN to stock (Stock ROM recommendation?)with repartition, ODIN the Simply3.8 Odin/Heim package. After rebooting boot into recovery and install the latest release of Simply Honey.
If these instructions are still useful, please link to SH 3.8 Odin/Heim package pls.
5. If all else has failed make a backup of everything you want saved to your computer. Boot recovery and go to mounts and storage and select format SD. After it's done reinstall Simply Honey's latest release.
6. If your problem still remains after doing all of this or just the last step then I suggest finding another rom as this one may not be for you.
I made an attempt to convert from CM7.1 this weekend; it wasn't clear what was going wrong but I couldn't get SH 5.1 to load properly. I tried to Odin the SimplyHoney 5.1 light version as per the first group of instructions, however, it was unclear whether I needed to repartition or not. the phone began the robot voice indicating partitions were not correct. I odin'd back to stock and reflashed CM7 with no problems.
Please understand I'm not trying to be critical, and I have rooted/flashed a number of phones over the years. Although I've been a fan of CM in the past, it's absolutely not where it needs to be on the Galaxy S/Vibrant and the Nightlies are not getting there fast enough. After reading the settings/features and positive comments for this ROM I'd really like to try it out, but the vague instructions and lack of links are not making this process easier.
If one of the developers can answer some of these questions, I'd be willing to assist writing documentation for this and future SH releases.
I made a clean ROM based on the factory ROM for the Lenovo A789, A660 and P700i
Cleaned up ROMs:
- A789_S227_cybermaus_V2 (below)
- A789_S228_cybermaus_V2.1 (further below)
Ported ROMs (ported from P700i):
- A789_ROW_S105_cybermaus_ICS_V3 (further below)
- A789_ROW_S106_cybermaus_ICS_V3.1 (Further below)(also for A660 and P700i)
- A789_ROW_S107_cybermaus_ICS_V3.2 (Further below)(also for A660 and P700i)
The current and advised rom to use is A789_ROW_S106_cybermaus_ICS_V3.21
Based on factory ROM A789_S227_120827, and located in my Dev-Host. It is as close to factory as possible, which I hope will be good for stability. It is a flash-utility ROM, because it also holds the latest preloader, uboot and recovery. Assuming those are OK, followup fixes will be update.zip style.
Summery of changes:
- Rooted the phone with Chainfire SuperSu
- Set to boot in US-english, changed name of ROM
- Added MoreLocale for extra languages in 3rd party apps
- Removed Chinese apps, incl Chinese keyboard, removed SmsReg.apk
- Left Lenovo Security (anti-malware) and Lenovo (Go) Launcher intact
- Added Google GAPPS, Play Store, Maps, etc
- Added MobileUncle toolbox, SManager (root explorer). Titanium backup (free version)
- Added fix for location services
- Added CWMT recovery image (modded from 593cn.com)
- Added Skype, Whatsapp, and some others, as auto-install into userdata upon wipe
- Prepared busybox (you need to run script /system/xbin/installbusybox as root if you want it)
- Replaced bootup animation with clean Lenovo butterfly
- Replaced all some audio files with english named ones (thanks mabuc)
- Caller ID bug still present, sorry
- Just as a reminder, these ROMS have English and Chinese only.
Instructions:
By default, the ROM will not overwrite USERDATA or FAT. If you want a clean slate, first extract empty.userdata.rar and/or empty.fat.rar
- Read bgcngm flash tutorial.
- Read it again
- Start Flash Tool (v3.1222, in my Dev-Host)
- Load scatter file
- Take out USB cable and replace battery
- Press the download button in the flash tool
- Connect the USB cable
- Wait for the flashing to complete
A789_S228_cybermaus_V2.1 (no longer current, Use V3 instead)
Based on factory ROM A789_S228_120913, and located in my Dev-Host. Similar to V2, but newer, and a few extra fixes. It should be noted that the S228 is listed to solve unexpected crashes, so an important update in itself.
I do not have a A789, so it is a blind build. Until I get positive feedback, consider untested. Don't be the first to try if you are not experienced.
Summery of changes:
- Same as on V2, and additional
- Removed 2 more chinese apps that I forgot last time
- Prepared busybox (you need to run script /system/xbin/installbusybox as root if you want it)
- Added a tweak so USB-Debug notification is no longer shown
- Added a tweak so Wifi works on all 14 international channels (rather than only the 11 US ones, may be undone if you set a different locale)
Instructions:
This is a update.zip type ROM. So you need the custom recovery, see post #3,
A789_ROW_S105_cybermaus_ICS_v3.03
Based on P700i_ROW_S105_120920, see this separate post.
A789_ROW_S106_cybermaus_ICS_v3.11
Based on P700i_ROW_S106_121001, see this separate post.
Please note that this ROM I also build for the P700i and A660. See same post.
A789_ROW_S107_cybermaus_ICS_v3.2
Based on P700i_ROW_S107_121221, see this separate post.
Please note that this ROM I also build for the P700i and A660. See same post.
Below:
Post #2: Small review and fix of location services
Post #3: Custom recovery image
Post #4: Root your phone / install GAPPS
Also, many issues for the A789 are similar to those of the A750, so if you have questions, do search that Lenovo A750 thread to.
Thanks
Also thanks to bgcngm for his help, and to jazzor for his help
=================
BTW: Due to new forum rules, resulting in a large number of people that cannot post into developer threads and that subsequently PM me, I open op a new Q&A thread.
I am not going to be policing, so you can post where you like, but I invite everyone to use this new thread for any Q&A, and this thread for ROM releases and deep development talk only.
Consequently, if you PM'ed me, look for your reply in this new thread
Thanks
====================
PS: do drop me a reply if you use or tried it! Or press the 'thanks' button.
So, I got my first glimps at the A789. So to speak. My colleague was holding it while we were audio-skype, so I did not actually see it.
His A789 came with a Etotalk ROM by Dean, which I now suspect is a reworked Smileyvvv ROM with Sony Experia interface. Not bad, but as you know, I am a 'factory ROM' guy. My colleague may also be, because he had already replaced the the SE launcher with GO Launcher, which is the default Lenovo one. Also my colleague said it jammed a few times, which it still has not done on my factory A750 ROM.
Most of the phone worked, but a few tips for others out there:
- The phone still has the Called-ID bug. Even though it is newer 4.0,4. I know some of you claim this is solved on ICS Mediatek, but I still claim it is solved in *some* of the cases, not all, it also depends on how your provider sends the caller ID info. Anyway, you can work around it with the prefixer app as reported before.
- It did not come with the MobileUncle tool, but with the Etotalk tool. Which was not updated for the new MT6577 chip, so it had no Engineer Mode. Install the latest MU tool (version 20120813v2.2.0 its in my Dev-Host), so you get one with MT6577 Engineer mode.
- Recovery Mode was hard to get into. Like the newest A750 preloader, you have to press the power putton *just before* you press both volume buttons. But it did came with the CWMR Touch, though its Touch function was broken, so buttons only. They probably simply tried recovery images of other models, and did not properly build one with the A789 kernel, but it does not matter, it works well enough.
- Location services did not work. Update the phone with the ICS_locationfix_v1.3 update using recovery mode. While you are in recovery, also wipe cache. And finally, go into MobileUncle tool, the MTK Engineer mode, and in location settings, change the NetLoc from MEDIATEK to GOOGLE. Now your location services should work.
Lenovo A789 Recovery
I created a recovery image for the Lenovo A789 based on ClockWorkMod Touch 5.5.0.4. However, I do not own a A789, so until I have reports of it working, consider it untested. You can download it from my Dev-Host: File A789_S22x_recovery_cybermaus.rar
NOTE: It has come to my attention this recovery works well, except the nandroid backup function, which is broken. If you value nandroid backup, install the APKHOT one below.
While doing this, I also found a full APKHOT distro which had what seems to be a CLockWorkMod (non-Touch) recovery in it, so I extracted that and also uploaded it. That too you can download from my Dev-Host: File A789_S22x_recovery_apkhot.rar
Both of them you will have to flash using the flash tool, using bgcngm's excellent manual, and the V3.1222 of the flash utilities and drivers, also in my Dev-Host. If you flashed my V2 ROM, you do not need to do this, as the recovery is already part of that.
Once you have the recovery installed, you can enter it by pressing both VolumeUp/Down while booting the phone. Due to an issue with the preloader, it may be needed to press the power button slightly before both volume buttons. If the phone seems stuck, it means the preloader messed up, remove battery and try again.
Inside the recovery (the Touch variant) you can navigate not only by its physical buttons, but also by screen buttons, and by gestures: swipe up/down for up/down, left for back and right for enter.
The first few people using this, please report your findings, good or bad.
PS: As alwasy, thanks to bgcngm for his unpack utilities, which I used to modify the recovery.img
Lenovo A789 Root; GAPPS, Location DIY
Its been mentioned before, but if you have a working recovery (like above, hopefully), you can always yourself root your phone. Simply install (from inside the recovery) chainfire's "CMW installable ZIP"
Link to his post: (ignore his big red requires root warning)
The file you need is labeled "CWM installable ZIP" at the bottom.
Direct link to the file you need to install via recovery update.zip
And while you are at it: You probably also want to install the latest Google Mobile Services (better known as GAPPS) from CyanogenMod V9:
Explaining wiki from CyanogenMod
The file you need is called gapps-ics-20120429-signed.zip and can be found here
You probably also want to wipe your cache partition after doing this.
To complete this DIY of fixing factory ROM: On Chine phone typically the location services do not work. Update the phone with my A750 V1.3 update using recovery mode. (it works on the A789 because it is a minor update, but *DO NOT* any of the other A750 updates on the A789. I repeat, do *NOT* flash A750 on A789). While you are in recovery, also wipe cache. And finally, go into MobileUncle tool, the MTK Engineer mode, and in location settings, change the NetLoc from MEDIATEK to GOOGLE. Now your location services should work.
Good luck
PS: If either update.zip refuses to install, remember to turn off the checksum and assert checks in the recovery.
And thanks to Chainfire for his work, and the team at CyanogenMod for theirs.
cybermaus said:
Before I can help, please provide some info:
Can you tell me what ROM you have?
Which flash tools did you use to root?
Also, do you have a working recovery?
Click to expand...
Click to collapse
hwonggc said:
I fix the proximity thingy. it's caused by my lousy screen protector. But i've got another bigger problem now. I've accidentally uninstalled the default system home screen. I cant assess anything now. I tried flashing a recovery inside but it still doesn't work as factory. I use SP flash tool v3.1.222.00
---------- Post added at 06:32 AM ---------- Previous post was at 06:18 AM ----------
dont think my recovery is working. Could you please provide me with a working recovery? =(
Click to expand...
Click to collapse
Yes, a recovery is on the todo.
But for now, you did not answer my questions yet:
- Can you tell me what ROM you have? Or had. Original Lenovo Factory, Etotalk-Dean, some other?
- Which flash tools did you use to root? Or rather, which files did you flash using that tool to deal with root. Actually, the fact that you had to root it yourself probably means you had factory ROM, but please confirm.
As stated, I am uploading S221 original to my Dev-Host. Flash that with the flash tool. On short notice, that is all I can do. On longer notice, I will help you, but give me some time.
Edit: In fact: You you already have messed up your recovery, and I do not have a A789 to play with myself, you may be my guinea pig for the recovery build. So I will work on that today. (as today is not a working day for me anyway). If you do not mind being a tester. After all, the damage is already done, and you apparently already know how to flash using the utility.
EDIT: @ hwonggc : Please test recovery in post#3. Just update your post below with results, or PM me. I would like to avoid too many new posts on this while we are testing.
cybermaus said:
Yes, a recovery is on the todo.
But for now, you did not answer my questions yet:
- Can you tell me what ROM you have? Or had. Original Lenovo Factory, Etotalk-Dean, some other?
- Which flash tools did you use to root? Or rather, which files did you flash using that tool to deal with root. Actually, the fact that you had to root it yourself probably means you had factory ROM, but please confirm.
As stated, I am uploading S221 original to my 4Shared. Flash that with the flash tool. On short notice, that is all I can do. On longer notice, I will help you, but give me some time.
Edit: In fact: You you already have messed up your recovery, and I do not have a A789 to play with myself, you may be my guinea pig for the recovery build. So I will work on that today. (as today is not a working day for me anyway). If you do not mind being a tester. After all, the damage is already done, and you apparently already know how to flash using the utility.
Click to expand...
Click to collapse
Yes yes. I had the factory rom. I got the phone just yesterday evening and this afternoon it's half dead already. I use smart phone flash tool to root using a file i got from http://www.fight.org.ua/publications...novo_A789.html. Everything was fine until I deleted the original home UI and the apex launcher also. So there isn't anything I can do. I'm downloading the S223 from some russian site and try, hopefully I can find some luck there. Downloading slowly~ sighhhh.
---------- Post added at 07:49 AM ---------- Previous post was at 07:40 AM ----------
BTW~ i'm willing to test out your rom too! I wouldn't want to sound too demanding, put please please put in the play store will ya?
I posted the custom build, see first post. It may take a while before I can get it uploaded, I am on a bad link.
Also, there have been 20 downloads on the recovery image. Come on guys, someone must be able to provide feedback about it working or not!
A789_S227_cybermaus_V2 ROM is working
Hello
Thanks for Your work.
Your A789_S227_cybermaus_V2 ROM is working.
Simple Flashing and start without problems. Now I must check some functions.
Thx again
basell
Edit:
The 3g connections don't work at first run. After restore they start but in My opinion with less sensitivity (compare to stock rom). It's look like A789 loose some frequency on witch can work.
Edit2:
And they have some strange behavior - After couple min of data connection (on 3G) they disconnect with information - "Restricted access changed" and the same is when I try to choose network manually. After that sometimes they login to 3G sometimes they change to EDGE.
In Stock version (S221) was not this kind of problems.
Edit3:
In place with good 3G signal I have no problem with data transfer.
How Can I check on witch frequency (2100,900,850) I have connected My data transfer?
Thanks for testing
Well, I definitely did not mess with any of the 3G stuff. So if it is true that 3G is less sensitive, then I would claim it is true for the factory S227 vs factory S221, and not directly related to my cleanup of it.
But (sorry to say so) I have learned to take claims of improved or degraded radio sensitivity with a grain of salt, even for the factory ones.
Having said that: Restoring S221 radio into S227 firmware is easy. The radio is separate firmware file, and I can extract the S221, S223 and S227 firmware in a separate file, so you can test. Were you actually using factory S221, or some other?
As to whether it is using 2100, 900 or 850: I can probably figure out how to get that info, *BUT* reality is that your provider most likely has only one frequency anyway. Most, pretty much all, EU providers are on 2100. The phone could not get to 900, simply because your provider does not have that frequency in the air (not for 3G anyway). And 850 is not supported at all on this phone.
Anyway, inside MU utility, engineer mode, bandmode, you can check/set the frequencies that are supported.
But please run a proper test if 3G is really degraded. As stated. it is so often a empty claim, I am somewhat careful to follow it. You want me to extract the 3 versions of firmware files in update.zip files?
Also, what country/vendor are you? please list the MMC and MNC from inside the APN settings.
Hi
If You will prepare this files I can test it tomorrow.
I'm from Poland and I have two frequency on data transfer - 2100 and 900. But I don't know if A789 use only one or change them. The place I'm test the signal is poor and I don't see if I work on 2100 or 900.
If You can, pleas tell me what kind of tests I can do to do that properly
Ok, here they are. update.zip type.
I only have S221 and S227, but the firmware files were indeed different, in more than just their timestamps. Of course, normally I would assume newer is better. So to make it clear: below files only replace the radio&dsp firmware, not the phone firmware.
Try to test honestly for yourself. Same conditions, same place, same time (because network load can make a difference)
It is possible that 3G really is degraded in S227, but as mentioned, I learned to not jump to conclusions just because the network is having a bad day.
WARNING: I retracted the two attachment, because I made a typo in the installer script. While the firmware is for the A789 (MT6577), the installer script is for the A750 (MT6575). Sorry. I will upload the correct ones in a moment.... Anyone that took a copy of these files before Oct 14, delete them!!!
I suspect the install would simply have failed, no harm done, but best to get rid of all copies anyway
BTW: basell, is that why you asked how to install? Really, if you ask for help, you should provide a bit more info. Anyway, I attached newer scripts, if you still want to try.
sorry for My question but :
How to install this firmware?
Like any update.zip on android. Go into recovery (see post #3) and apply the update.zip
i have the problem that the netlocation doesn't work with google maps, i flashed the cyber update 1.3, nothing changed, what should I do now?
And this is on what phone and ROM?
Anyway, to quote myself: "While you are in recovery, also wipe cache. And finally, go into MobileUncle tool, the MTK Engineer mode, and in location settings, change the NetLoc from MEDIATEK to GOOGLE. Now your location services should work."
many thanks, Cybermaus, netlocation works again after your instruction
Hi,
Thank you very much for building the ROM !!
I am using it for 3 days now and I am happy to report no problems with it. Everything works and most important: no more freezes !!!
my A789 came with the Etotalk by Dean ROM which was mostly OK, but was freezing from time to time (some days not at all, other days several times a day - most of the times when hanging up a call or, when trying to do wake it from standby: I was pressing the power button, but the screen would not light up).
Other things I like about this ROM:
- all phone functions work great
- Google Play works perfectly
- is rooted
- it has the Lenovo battery app, which is great! I am not 100% sure if this is the reason, but the battery life went from 1 day to 2 days
- I had no issues flashing it
- CWMT recovery works
Also, so far, I did not experience any 3G issues
I have written a small review of the Lenovo Security app, which you guys may want to put back on your phone if it was cooked out of it.
jman0 said:
Thinking it twice, I've remembered another reason. One of the things I like most about the apkhot rom I'm using is that the external sdcard is mounted on /sdcard and not /mnt/sdcard2, which avoids problems with many apps. I tried one of the newest apkhot roms, based on s227, and none of the tricks to exchange /sdcard and /mnt/sdcard2 worked with it.
Click to expand...
Click to collapse
Well, that is actually an easy change to perform, just change the /etc/fstab.vold
However, if you go into settings->storage, the first option is default write disk. Change it from USB storage(the internal SD) to SD (the external SD)
So no hacking is needed at all.....
I've been running your rom for around 6 hours now. Everything runs fine. The 3G connection worked without much trouble. The only thing I haven't been able to do is performing a backup with the CWM Touch Recovery. So, I've just flashed the recovery I had on the apkhot rom I was using, using Mobileuncle tools, and now I've been able to create a backup.
So far, so good, and I've noticed a slight performance increase, too.