I am currently running CM7. But I would rather have my Old stock 2.1. I am running On a Huawei Ascend on Cricket Wireless. I have CWM and ever since I ran CM7 and changed things around it still drains my Battery Faster than usual and heats up my phone. I lowered the CPU and such.
Anyways to the problem:
I have been trying to get the old stock version back on to my phone but for some reason I can not get things to work right. I Try a fast boot and it just reboots the phone back into CM7 and does nothing. I have tried to do it through CMW and same thing happens. I want to try to us the SD Card update option through the Systems settings but I can not find it. I just want to get CM7 off of my phone and mess around with a few other things before I commit to a new mod.
If anyone has any ideas on what I can do just let me know. Is there anything I can do that I have not tried already?
Edit: Yes I know I am new and yes this is my first post. I just need help please, and thank you.
Hi Guys,
I checked around but I couldn't find anything. I rooted my phone using the 1 click method provided here http://forum.xda-developers.com/showthread.php?t=1096384 This part went swimmingly. I had my phone rooted and ready to go. I then downloaded CPU set and the program would not let me speed up the CPU past 1 Ghz. so then I downloaded this: kernal netarchy-nexus-1.3.0.2-bfs-2.3.3-cm7-compat-signed which supposedly allowed me to overclock my phone. I then placed the zip file into the root directory of my phone. I downloaded ROM manager and used that to install netarchy-nexus-1.3.0.2-bfs-2.3.3-cm7-compat-signed. When I did this the screen went black and the capacitive buttons at the bottom lit up. I can reach the recovery screen but that is it. There is no USB connectivity with the computer. Is there anyway to fix this or did I just turn my phone into a paper weight.
Thanks,
Cloo
Phone processors are a funny thing. Some can handle being overclocked higher than others. I am assuming that you went all the way up to 1400 and your CPU just gets too hot and everything locks up on you. You need to have a rooted Rom on the root of your sdcard and wipe everything from recovery and flash the Rom from recovery and start over. If you go with Netarchy's kernel again I suggest bumping the CPU up to 1200. If it can handle that bump it up to 1300 and obviously it can't handle 1400. You won't see much of a benefit from 1000-1300 for the most part. I keep mine on 1200 and it runs great. Anything higher for me and the phone starts to get hot and lag somewhat. Your phone is not a brick. If you can get to recover and/or bootloader there is always hope.
Also check out these threads to help you get back to 100% stock and start over.
http://forum.xda-developers.com/showthread.php?t=1072698
http://forum.xda-developers.com/showthread.php?t=1103727
Do you have a NS4G which is what the one- click is developed for or a Nexus S, which is what the Kernel you flashed is for? My guess is that you flashed a kernel which is not compatible with your rom.
Sent from my VEGAn-TAB using Tapatalk
You may not have waited long enough for the phone to boot. His bfs based kernels have a bug that most of the time the phone boots to a black screen captive light shows and no boot animation. It will boot but just takes time of you have right kernel. This is spoken about in his thread.
@housry I never got all the way through the switch to netarchy. Once I used ROM manager the screen blacked out upon reboot and nothing happens now. I managed to get the file SamsungSimpleDL onto my phone but when I try to install it aborts. Any thoughts?
@debh I have the NS4G
@Jerry the phone has been sitting with a black screen for about 10 minutes so I think I screwed something up
According to your op, you flashed a 2.3.3 cm7 kernel. Are you running stock 2.3.4? You need to flash the correct kernel for your rom.
Also, I just read your post above and you aren't supposed to flash the simple.zip on your phone. Download and extract the contents onto your computer and run the .exe from there with your phone connected.
Sent from my VEGAn-TAB using Tapatalk
Deb thanks for the quick reply, am I supposed to have my phone in download mode?
Phone is fixed!!! Thanks to all!
Quick question, im sorry, as I didn't know where to ask. Even checked threads and couldn't find an already posted answer. I have a ns4g, rooted, still on stock rom. Will I still get ota's from google when they push newer software than 2.3.4, which is what I run, and also get ota software bug fixes from goolge when they release it? I really hope so, as I want to stay current with the latest builds from google.
Sent from my Nexus S 4G using XDA App
sh4nk said:
Quick question, im sorry, as I didn't know where to ask. Even checked threads and couldn't find an already posted answer. I have a ns4g, rooted, still on stock rom. Will I still get ota's from google when they push newer software than 2.3.4, which is what I run, and also get ota software bug fixes from goolge when they release it? I really hope so, as I want to stay current with the latest builds from google.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
It will be faster to find them on XDA than the wait for OTA
Thank you Plus waiting a little bit will skip any bugs to be fixed lol
Sent from my Nexus S 4G using XDA App
I have been having issues getting my TF101 to overclock in ICS. I have tried Codename Android, CM9, TeamEOS, and Revolver, and ALL of them I could not overclock in. I have tried SetCPU, No-Frills, and (if applicable) the built in frequency control. They all show that the maximum frequency is 1000MHz. I have no clue what is going wrong here. They all were able to gain Superuser, so that isn't the problem. Any and all help would be highly appreciated. I just have no clue what I could be doing wrong.
stompysan said:
I have been having issues getting my TF101 to overclock in ICS. I have tried Codename Android, CM9, TeamEOS, and Revolver, and ALL of them I could not overclock in. I have tried SetCPU, No-Frills, and (if applicable) the built in frequency control. They all show that the maximum frequency is 1000MHz. I have no clue what is going wrong here. They all were able to gain Superuser, so that isn't the problem. Any and all help would be highly appreciated. I just have no clue what I could be doing wrong.
Click to expand...
Click to collapse
Antutu CPUMaster Free works for me on Revolver4_1.3.1 and Blades_meh kernel. You have to manually go into it after installing a OC kernel and set the min and max frequencies and choose a governor and there's a checkbox to tell it to set these at boot. After that it works all day everyday for me up to 1680MHz and deep sleep works, too.
sidneyk said:
Antutu CPUMaster Free works for me on Revolver4_1.3.1 and Blades_meh kernel. You have to manually go into it after installing a OC kernel and set the min and max frequencies and choose a governor and there's a checkbox to tell it to set these at boot. After that it works all day everyday for me up to 1680MHz and deep sleep works, too.
Click to expand...
Click to collapse
Just tried Antutu CPU Master. Same issues. It says that my max frequency is 1000MHz.
Have you manually loaded a new kernel to replace the stock one? Setcpu and the like only modify settings that a kernel exposes, and the default kernel does not allow anything higher then 1000.
Tekfrog said:
Have you manually loaded a new kernel to replace the stock one? Setcpu and the like only modify settings that a kernel exposes, and the default kernel does not allow anything higher then 1000.
Click to expand...
Click to collapse
Yes. After doing so, I also go into my settings and clear the cache and data from SetCPU, so I could set it up again. Still, I am getting max 1000MHz.
stompysan said:
Yes. After doing so, I also go into my settings and clear the cache and data from SetCPU, so I could set it up again. Still, I am getting max 1000MHz.
Click to expand...
Click to collapse
Which kernel are you running now?
Tekfrog said:
Which kernel are you running now?
Click to expand...
Click to collapse
Thanks for trying to help, but I have found my problem. My recovery was still borked from when I tried flashing the official one in Rom Manager. Wiped my recovery, installed the roach recovery, reflashed all of my files, and now I am good to go. I feel like a derp now. LOL
Same issue w/ OC...but wipe recovery?
Your issue sounds exactly like the one I am currently having.
I would like to try your fix...but I am not understanding how the "wipe recovery" process goes. Would you mind please explaining that in more detail? Im pretty sure it IS NOT as simple as just doing a complete cache/data wipe then flashing the recovery over itself is it?
I am:
ViperMOD Prime rooted
ClockworkRecoveryMOD installed (but I think I may have fubar'd it doing the same thing you did trying to recover stock recovery)
FROZN 1.0.9 rom w/ included Guevor kernel and NoFrills CPU app
...but none of the CPU apps will let me OC...wether I flash the kernel seperate from the ROM or use the one included w/ the ROM.
Hope you can help me.
UPDATE: apparently this inability to OC the kernel in any way is happening to those of us experiencing the CWM bootloop issue...so since the loader goes immediately to CWM it never runs the flashed kernel.
So in these forums is a thread to fix the CWM bootloop and if you follow the instructions carefully, you fix the bootloop and thus allowing the flashed kernels a chance to actually install. I chose the Roach method which you can install the code using Terminal Emulator pretty intuitively. I didnt choose the other method because I didnt want to mess w/ setting up an ADB terminal on my PC, which seemed MUCH more difficult.
So...now FINALLY
ViperMOD Prime rooted
ClockworkMOD Touch Recovery 5.8.8
FROZN 1.0.9 ROM (w/ built-in Guevor kernel @ 1.2 default) and am OCd @ 1.54 (np's at all so far, lightning fast, havent even tried 1.6 or 1.7).
Only issue so far is File Manager app crashes on startup...which isnt good because now the other file manager app I tried doesnt see my ext_SDcard...the stock File Manager did.
I've tried using both tastyMEH and Blades using Revolver, CM9 and Android HD, and the stock ICS ROM, using Set CPU and ROM Toolbox pro to try and overclock. I've flashed the ROM first and then the Kernel, and the Kernel and then the ROM. Nothing I've done thus far has enabled me to set the CPU sliders past 1000 mhz. I know people are running these combos and getting 1.6-1.8 clocks. What am I screwing up? I'm using Clockwork Mod recovery to flash. I couldn't even get CM9 to boot.
Thanks so much in advance
Teh Wuss
WU55 said:
I've tried using both tastyMEH and Blades using Revolver, CM9 and Android HD, and the stock ICS ROM, using Set CPU and ROM Toolbox pro to try and overclock. I've flashed the ROM first and then the Kernel, and the Kernel and then the ROM. Nothing I've done thus far has enabled me to set the CPU sliders past 1000 mhz. I know people are running these combos and getting 1.6-1.8 clocks. What am I screwing up? I'm using Clockwork Mod recovery to flash. I couldn't even get CM9 to boot.
Thanks so much in advance
Teh Wuss
Click to expand...
Click to collapse
Please see above solution...I know it seems unrelated but it is the fix for both CWM bootloop AND being able to accept and install a flashed kernel.
If you need additional help, please ask. I am willing to share my solution in more detail to help others out.
WU55 said:
I've tried using both tastyMEH and Blades using Revolver, CM9 and Android HD, and the stock ICS ROM, using Set CPU and ROM Toolbox pro to try and overclock. I've flashed the ROM first and then the Kernel, and the Kernel and then the ROM. Nothing I've done thus far has enabled me to set the CPU sliders past 1000 mhz. I know people are running these combos and getting 1.6-1.8 clocks. What am I screwing up? I'm using Clockwork Mod recovery to flash. I couldn't even get CM9 to boot.
Thanks so much in advance
Teh Wuss
Click to expand...
Click to collapse
When you flash the kernel go to the about section in android and make sure the flash was actually successful.
fwbflash said:
Please see above solution...I know it seems unrelated but it is the fix for both CWM bootloop AND being able to accept and install a flashed kernel.
If you need additional help, please ask. I am willing to share my solution in more detail to help others out.
Click to expand...
Click to collapse
Thanks, this may be a step in the right direction. However I've tried 3 times now to flash the 5.8 touch to no avail. Everytime I reboot I end up with standard 5.5.0.4. I tried flashing with CWM. What am I doing wrong? If it helps ever since I flashed CWM, if the tablet retboots for any reason it automatically boots into CWM, and I have to cold boot into Android manually using the power and volume rocker.
Thanks again-
Teh Wuss
WU55 said:
Thanks, this may be a step in the right direction. However I've tried 3 times now to flash the 5.8 touch to no avail. Everytime I reboot I end up with standard 5.5.0.4. I tried flashing with CWM. What am I doing wrong? If it helps ever since I flashed CWM, if the tablet retboots for any reason it automatically boots into CWM, and I have to cold boot into Android manually using the power and volume rocker.
Thanks again-
Teh Wuss
Click to expand...
Click to collapse
Because your version of CWM is bad. You need to read this thread: http://forum.xda-developers.com/showthread.php?t=1530337
It's on the front page of general discussion, how did you even not see it yet.
horndroid said:
Because your version of CWM is bad. You need to read this thread: http://forum.xda-developers.com/showthread.php?t=1530337
It's on the front page of general discussion, how did you even not see it yet.
Click to expand...
Click to collapse
Thanks, this was it, I didn't see it, because I was a noob and didn't look for it.
Hi guys and gals hopefully someone can help me out here. I'm new to android and the language so forgive me for any mistakes I've made haha. So I put voodoo lagfix plus voodoo sound kernel on my phone. It was for 2.2 and I am on 2.3.4. I don't have enough posts to insert links nut if you Google easy lag fix mesmerize its the one on android authority. Anyhow I did not use sgs flasher I just did the cwm recovery apply from SD after wiping cache and dalvik. Rebooted and it was great quadrant was at 2200 and everything was smooth. Then later that day I was curious as to see what my CPU was running so I went to SetCPU to see. It just went to a black screen that could be exited by hitting home. I checked all my root access apps and they did the same thing except for nandroid browser and root checker. Root checker says system running slow and never reaches a conclusion. So I disabled lagfix in cwm recovery and rebooted. It went through and disabled it and started back but apps all behave the same. I do have full access to superuser. What could cause this? Would removing voodoo fix this and if so could someone give or point me to a step by step tut?
Would flashing a new kernel remove the voodoo kernel?
Just to clarify if you haven't already solved your problem.
1.What phone are you using?
2. what Rom or Radio are you on?
3. and which kernel.did you flash?
My Mesmerize is running Awesome Sauce 10.5 & there are a handful of compatable Kernels (I use KGB kernel w/ app).
Sent from my Sauced Mesmerize using the XDA developers app!
Few questions after installing Revolver 4.2...
I try to install Guevor's 22.6 kernel, it goes through the process and it says complete. I reboot and the kernel still says 2.6.39.4 android @mars. What am I doing wrong?
Also when I tried to install the kernel through Revolver Parts, it doesn't download the file into sdcard/Downloads. I couldn't find it anywhere so I had to download it manually.
Also, am I able to boot my system so it automatically loads the rom? Everytime I boot it automatically loads into CWM and you have to manually get it to boot. Anyway around this?
Finally, can someone explain overclocking real quick to me? Can I overclock on this android @ mars kernel? (If guevor's works, I'd do it on that). I thought I could go on SetCPU and just change the clock speed to whatever I wanted (1.5GHZ for example). Instead there are two filters, one that is maxed at 1GHz and the other at 200MHz. What would the equivalent of 1.5GHz to set both bars accordingly?
I would REALLY appreciate if someone could help me out, total NOOB lol.
short answers:
its not an overclockable kernel then
and
if you can Nv Flash a rom and recovery then its probably the easiest way to resolve the cwr loop.
if you used rom manager then i would advise not doing that ever ever again on the Tf. (just a guess)
Read me and if you get it resolved with Peri then remember to thank Thing of Doom.
scottyf79 said:
short answers:
its not an overclockable kernel then
and
if you can Nv Flash a rom and recovery then its probably the easiest way to resolve the cwr loop.
if you used rom manager then i would advise not doing that ever ever again on the Tf. (just a guess)
Read me and if you get it resolved with Peri then remember to thank Thing of Doom.
Click to expand...
Click to collapse
I just read that Guevor's 22.6 is a stable kernel. Even if I don't overclock it, it should replace the stock kernel no?
And yeah I used ROM manager to install the latest version, why would it mess it up? What is "Nv Flash"?
Okay got everything working. Transformer boots perfectly, new recovery works a lot better, installed the kernel and have it clocked to 1.5GHz
Thanks again!
BTW- Uninstalled ROM Manager :silly: