Related
i JUST BOUGHT A NEW O2 EXEC, AND TRIED MY BEST TO UNLOCK cid AND SIM, O2 APPARENTLY SHIP THEM UNLOCKED, SO I TRIED AND IT WAS. TRIED TO cid UNLOCK BUT NO LUCK KEPT GIVING ERRORS. SO I BEGUN THE INSTALL CROSSBOW LATEST, AND IT THEN WAS STUCK ON O2 SPLASH SCREEN, TRIED TO REFLASH WITH THINGONASTRING, NOW ITS STUCK ON BOOTLOADER, SAYING V2.01 AT BOTTOM AND SERIAL OR USB (WHEN CONNECTED), I HAVE LOOKED AND TRIED ALL OPTIONS, I TRIED UNI_EXTBOOTLOADER, AND THE OTHER ONE WHEN I WAS STUCK IN SPLASH SCREEN. NOTHING IS WORKING, THEN I TRIED TO SEE IF I COULD INSTALL OFF CD WITH O2 EXEC, BUT CANNOT FIND RUU. THE ONLY WAY I CAN NOW GET INTO BOOTLOADER IS FIRAT ATTACHING THE USB CABLE THEN BOOTLOADING, I CANNOT DO IT WIHOUT USB CONNECTED, BUT IF I TOOK THE USB OUT AFTER I HAVE GOT IT INTO BOOTLOADER, IT STILL STAYS ON. WHEN I ALSO PRESS THE RESET WHILST USB CONNECTED, THE LIGHT ON O2 EXEC FLASHES RED EACH TIME PRESSED?
ANY HELP WOULD BE GRATEFULL.... COULD THIS BE VISTA??? AS THATS THE OS I USE.
Please help, this is supposed to be a christmas present... i just couldn't help myself!!!!
vistar said:
Please help, this is supposed to be a christmas present... i just couldn't help myself!!!!
Click to expand...
Click to collapse
Hi vistar,
Hopefully, you will have it sorted out by Christmas!
Yes, it is Vista problem and you need to change the USB Vista driver in your PC to XP driver.
I don't mean changing the Windows Mobile Device Center to Active Sync 4.5!
But the USB drivers. Look here:
http://forum.xda-developers.com/showthread.php?t=313001
http://forum.xda-developers.com/showthread.php?t=291723
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I believe that the first post should solve your problem. If not try the others. Basically, in Device Manager of your PC, the USB driver should be the old XP driver dated 2004!
Any other year won't do you good!
Merry Christmas!
Happy New Year!
KOR!
It is highly recommended NOT to use Vista ... even with the proposed driver patch.
I have developed a Radio ROM issue because of this: http://forum.xda-developers.com/showthread.php?t=347375
If you are using Vista, it is highly recommended for you to use Virtualisation and install XP.
I have been using XP under VMware forever without problems as far as flashing my Qtek is concerned ... until my Vista mis-adventure that is. I know that VMWare is not free, but you may want to give http://www.microsoft.com/windows/products/winfamily/virtualpc/default.mspx a try.
I flash my two Universal at least once a day under Vista with no problems at all.
Flashing Radio, CE ROM and ExtROM with Vista hasn't created any problem for me.
Vista like XP automatically install latest update from Microsoft site, this update also includes drivers too.
Just before flashing make sure that your old 2004 driver is not changed to the latest 2006 or 2007 driver!
That's all folks,
KOR!
will try the threads above thanks, i have tried in vista, and also i use vmware too, with xp pro spâ. which seems to work better but get error ăđă, radio update error, i think i have wiped the radio??? as when the first screen comes up it says:
from,
Radio:
EXT Rom:
Bla bla:
to:
Radio: 2.?.??
EXT Rom: 2.2.??
Bla bla: 2.2.??
I cant remember what numbers came up, but it was blank at top and version numbers at bottom.
any help would be grateful
ok i got it to work , through vmware, i ran PsiDOC_WM5_20041_Taster, which worked think its WM̀ still but its back on, I want WM̉ though, i'll try again.. some advice wouldn't go a miss. thanks.
Note: If anyone has problems blame vista..... Good OS, Bad PDA Partner...
ok every rom i try fails with the following: Error 114, Radio Rom Upgrade error.
why is this??? i have looked through the wiki and forum, people have had this problem before, but no answers.
I have this when WM5 loads up,
1.09.00
42.42.p8
2.00.41 WWE
and bootloader v2.01 (G4)
just incase this info is needed.
thanks, i will leave it on WM5 till an answer is given, preferably before christmas...lol.
thanks guys for at least helping me.
vistar said:
thanks, i will leave it on WM5 till an answer is given, preferably before christmas...lol.
thanks guys for at least helping me.
Click to expand...
Click to collapse
If you have tried all the links I have given, you could have easily upgraded the ROM to Windows Mobile 6.
Read carefully, my above post #3.
Did you know that you could just flash the CE ROM (Main ROM), if the Radio is not flashing.
KOR!
KOR support center !!!
How do i Flash that alone? do i just remove the radio file from the WM6 folder and run RUU again??? just to confirm...
Thanks M8 much appreciated.
vistar said:
How do i Flash that alone? do i just remove the radio file from the WM6 folder and run RUU again??? just to confirm...
Thanks M8 much appreciated.
Click to expand...
Click to collapse
Read the four links, I have given you.
1. nk.nbf (CE ROM - Main ROM)
2. ms_.nbf (Extended ROM - Storage ROM)
3. radio_.nbf (Radio ROM)
If the ROM is in .exe format, than excute the ROM without hooking your universal to the PC. In the temporary folder, you will find all the files.
Read,
KOR!
sorry what i meant was how do i flash the files to the device??? i have all the files ready..
do i remove radio from folder then execute RRU? or do i use a different way?
Thanks for your support KOR!!!
the later worked perfectly on my G4 device, i ran the update without the device attached, put into bootloader, and found all files in temp directory, then removed the radio file. connected the bootloaded device, then ran the update, it worked straight away, only in xp/vmware though.
Thankyou..... I really mean that KOR..
vistar said:
Thanks for your support KOR!!!
the later worked perfectly on my G4 device, i ran the update without the device attached, put into bootloader, and found all files in temp directory, then removed the radio file. connected the bootloaded device, then ran the update, it worked straight away, only in xp/vmware though.
Thankyou..... I really mean that KOR..
Click to expand...
Click to collapse
Hi Vistar,
You are welcome. If you download the drivers from the first link in post #3, then you can use Vista without any problems to flash your device.
Just make sure that the driver is dated 2004 before flashing the device. Check the driver for the Portable Devices ->USB Disk in the Device Manager of your PC.
Best Regards,
KOR!
BTW, I did reply to your PM.
King of Rapture™ said:
I flash my two Universal at least once a day under Vista with no problems at all.
Flashing Radio, CE ROM and ExtROM with Vista hasn't created any problem for me.
Vista like XP automatically install latest update from Microsoft site, this update also includes drivers too.
Just before flashing make sure that your old 2004 driver is not changed to the latest 2006 or 2007 driver!
That's all folks,
KOR!
Click to expand...
Click to collapse
Perhaps that's because both your Unis are G3 - and mine is a G4.
Hi.
I have not posted much on this site, yet I have used it plenty of times. And first off I have to say "Thank you oh so very much" to everybody who frequent this site. Most of all I would like to thank the developers and rest of the crew that helps users on a daily basis.
I've had plenty of phones the last few years: 9090, 9100, Tytn and now Tytn II - all of which have been flashed - successfully I might add - with software and aid from you guys. (Ok, so my Tytn nearly ended up as a paperweight, but with some fancy maneuvers using the CE SDK from Microsoft I was able to use it as a PDA again)
Now, I am stuck. Really stuck. (Not saying I'm not to blame, but I am still stuck)
I've got a Tytn II (The P4550 HTC Kaiser 120 I believe). A few weeks back I flashed this with Alex's Home ROM (http://wiki.xda-developers.com/index.php?pagename=Alex's ROMs). At the time I was running Radio 1.27.12.11, and continued to use it after the Alex flash.
That worked perfectly.
But being interested in always trying new stuff I yesterday decided to flash Alex.v5.WM61.HTC.302.UltraClean.ROM.beta2. And it really went bad.
I studied up on many postings (obviously not enough) and started the process:
#1: Hooked up the pda to my computer
#2: HardSPL v1
#3: Tri-Color mode and activesync grey
#4: Started the upgrade with KaiserCustomRUU.exe
Everything went smoothly until it hit 99% - there it stuck and the program ended with a communication error. My computer runs Vista (yes, I know. I wont even consider flashing another phone using Vista), but it has worked flawlessly 25-30 times before.
Anyways, what happened when I tried to recover was that the phone went into tri-color mode. Needless to say it was unable to recover. After much back and forth I reinstalled an old laptop with XP (as mtty does not work on Vista) and was able to boot it back in to the OS using a walk trough from this site - cudos to Laurentius26 for the post)
Anyways - it came back. But since it failed the flash I tried it again to make sure it finished properly. What I did was flash back the Alex Home ROM I had in the first place - that worked. Then I flashed back the 1.27.12.11 Radio ROM - which failed - seriously.
It hung on 17% and when reset it would only boot to tri-color. And this is where I am now.
Every time the phone resets it boots to tri-color. I've done and redone the mtty (with and without the task 28), but it stops in tri-color mode. If I at that point hook it up to mtty and issue the boot command it will boot properly, but thats kinda annoying - having to carry with me a XP laptop for each time I have to reset the phone. (Ive also tried the set 14 0 when the phone is in this state, but it will still only boot to tri-color)
So - what now?
I've tried flashing the RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship, but it stops with 294 - invalid vendor id. I've tried flashing the same ROM with HardSPL installed - no vender id error but it fails at 16%.
In desperation I've tried HTC_Kaiser_NL_ROM_1.56.404.6_Radio_22.45.88.07_1.27.12.17_Ship, but this also fails at 16%.
I've studied many a post on this site, but have so far been unable to recover from this error.
Is there any hope of regain the much needed functionality of normal booting?
Hopefully there is.
Thanks in advance.
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Laurentius26 said:
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Click to expand...
Click to collapse
Most definetly.
These were also posted by e-men in another topic this morning so I am currently installing Windows XP on a computer at work to try this.
Will report back.
Laurentius26 said:
Can you try these?
http://forum.xda-developers.com/showthread.php?t=371154
New commands for MTTY.
Regards,
Leo
Click to expand...
Click to collapse
Woohoo!!!
XDA wins again.
The proper commands for the mtty worked like a charm.
Thank you kindly Leo, this was much appreciated.
Now for a question if you have the time: Since I started this process yesterday I have not been able to flash a Radio rom properly. It stops on 17% or 99% and quits with communication error. Any ideas?
And can I trust that my phone now works?
Cool...., thank you
Would you like to give this a try as well maybe?
http://forum.xda-developers.com/showthread.php?t=366014
I never tried to flash a seperate radio ROM, I'm a 'chief de cuisine' so I cook it in
Cheers,
ulfthomas said:
Woohoo!!!
XDA wins again.
The proper commands for the mtty worked like a charm.
Thank you kindly Leo, this was much appreciated.
Now for a question if you have the time: Since I started this process yesterday I have not been able to flash a Radio rom properly. It stops on 17% or 99% and quits with communication error. Any ideas?
And can I trust that my phone now works?
Click to expand...
Click to collapse
WM6.0 and WM6.1 radio's are different, they are not compatible!
So be carefull which radio version you are flashing
Info about radio versions:
http://forum.xda-developers.com/showthread.php?t=349375
Cheers,
Laurentius26 said:
Cool...., thank you
Would you like to give this a try as well maybe?
http://forum.xda-developers.com/showthread.php?t=366014
I never tried to flash a seperate radio ROM, I'm a 'chief de cuisine' so I cook it in
Cheers,
Click to expand...
Click to collapse
But of course - now that I know how to reset.
One comment: I absolutely love the Palm SMS program added by Alex in his rom. You know if this is manually installable?
This is threaded SMS isn't?
That's default in WM6.1.
But if it's a seperate program there must be a cab out there.
I will have a look if it's that good you say!
Cheers,
Leo
ulfthomas said:
But of course - now that I know how to reset.
One comment: I absolutely love the Palm SMS program added by Alex in his rom. You know if this is manually installable?
Click to expand...
Click to collapse
Laurentius26 said:
This is threaded SMS isn't?
That's default in WM6.1.
But if it's a seperate program there must be a cab out there.
I will have a look if it's that good you say!
Cheers,
Leo
Click to expand...
Click to collapse
Well, good is subjective ... but I love it.
As for the updating: halted on 16% - communication error.
*Looks around - "Where's my mtty"
How can I get pass these updating issues?
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
See if there are applications running on your desktop.
Disable your Firewall for example...
And please take your storage card out.
Some tips....
ulfthomas said:
Well, good is subjective ... but I love it.
As for the updating: halted on 16% - communication error.
*Looks around - "Where's my mtty"
How can I get pass these updating issues?
Click to expand...
Click to collapse
Laurentius26 said:
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
And please take your storage card out.
Some tips....
Click to expand...
Click to collapse
And all good tips Leo.
OS: Windows XP SP2. Freshly installed. Only Activesync 4.5 added.
HTC: Is orignial. Patched a few times using HardSPL
Original rom: As mentioned above I've tried a couple of them, but both ending in invalid vender id.
And no usb hub present.
Another comment - the flashing done today and yesterday has been done from two different xp computers - but with same result.
Laurentius26 said:
Which OS do you have on your desktop?
Do you have an original branded HTC device?
Try to flash a factory (shipped, not cooked) rom first!
Don't use a usb hub between your device and the pc, but use a straight connection.
See if there are applications running on your desktop.
Disable your Firewall for example...
And please take your storage card out.
Some tips....
Click to expand...
Click to collapse
hehe... really? Remove my beloved SD card? Of course - always do.
No need for firewall as there are no nic's. And also no applications.
I'm going to upload a shipped ROM for you, this one if you didn't try it yet?
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
Another question... did you use Custom RUU with ROM update?
http://forum.xda-developers.com/showthread.php?t=334890
ulfthomas said:
hehe... really? Remove my beloved SD card? Of course - always do.
No need for firewall as there are no nic's. And also no applications.
Click to expand...
Click to collapse
Yup - that one has been tested - fails with invalid vender id.
Also tried flashing that rom with HardSPL - comm. error.
And no, I have not tried the Custom RUU. Will for sure try that now.
The Custom RUU is the same file that is included with your 6.1 Rom isn't it? If so I have used it with your ROM.
Do you think I should try it with another?
Yes... try with another shipped ROM please?
ulfthomas said:
The Custom RUU is the same file that is included with your 6.1 Rom isn't it? If so I have used it with your ROM.
Do you think I should try it with another?
Click to expand...
Click to collapse
Tried custom ruu with Radio 1.27.12.17.
Same results as other flashes - halts at 95%.
Seems like OS flashing hangs at 17% and Radio at 95%.
Use one more time MTTY, clear all FATS and I've send you a PM.
ulfthomas said:
Tried custom ruu with Radio 1.27.12.17.
Same results as other flashes - halts at 95%.
Seems like OS flashing hangs at 17% and Radio at 95%.
Click to expand...
Click to collapse
If you're getting an invalid vendor id it sounds like your hardspl or superCID isn't working correctly. Before going any further it's probably best to go to your bootloader screen and check that hardspl is still installed.
After that, I'd try flashing from the SD card.
Good point ach2, but when launching HardSPL and starting the update it lists the correct data on the bootscreen (Jumpspl or something equivavlent to that)
Leo: Looking around xda I found an article about dumping the ROM from another device. In the same thread I found a link to dumped original ROM. I patched that and it worked like a charm.
My PDA came back to its original state.
After arriving home just now I thought I would give your ROM another go, but same result - stuck at 16% (With HardSPL and Custom RUU)
What can cause this?
Hi Folks
Well, here it is, ported from what I did for the Polaris basically... I find it's a nice solution as it works by flashing your device with a patched radio and changing stuff properly, anyway...
download and run the EXE, follow the instructions.
bear in mind if you already have Hard-SPL on your device you can skip *straight* to Step 2.
and remember the golden rule:
YOUR DEVICE MUST BE IN CE AND SYNCED BEFORE RUNNING EACH STEP.
Download Here or Download Here
UPDATE: now version v2.0 - Model ID error fixed, it WORKS.
if and when you get success, POST!
PS: If you try to sell this, I will find you, kill you, and sell your ****ing testicles on eBay
Yes, apologies, my error, new version uploaded
So what is the status now?
I found this solution does not work on all of devices. But my solution is as follows.
Run KaiserUnlocker.exe
1. I started with the Step 1. The upper button of total 3.
2. Go through the menus and accept everything.
3. You get TRI-COLOR screen on your device and a few seconds later you get the USB label.
4. After some time you get a communication error Message. DON'T RESET YOUR MOBILE DEVICE. DON'T TOUCH IT.
5. Press Exit to quit KaiserUnlocker.exe on your Desktop machine.
6. Unplug and replug the USB cable.
7. Start the KaiserUnlocker.exe again and wait a little bit.
8. Your mobile device (AT&T Tilt) suddenly alive again. The progressbar shows up and you're from 0% to 100% in a few seconds. Wait a little bit and then you get the message the process is finished.
Now I don't know what to do with step 2 and 3. Should I perform them or not. Hmm?
What I would like to do is just to update from AT&T Tilt ROM to original HTC TyTN II ROM
AS I said before.
REDOWNLOAD IT.
I just tested the flash on my Kaiser, it's fine, no pissing Model ID error at all.
however, to avoid any confusion, download AGAIN and this time you'll find that the version in the debug output is changed to v2.0
so if you don't see v2.0, you don't have the new one
Oh I see you changed the version now. At the time I downloaded it and wrote my first message it was just V1. There was no V2. But I can't test it now because I already have the ROM patched.
And I didn't get the ModelID error. It was a connection error 260.
I think it's just some guys of you are lucky to have a device that doesn't get the white screen when using hardspl and it doesn't stop on tri-colors or the progressbar at 0%.
actually, it's steps 2 and 3 that I care about, having a patched ROM is irrelevant.
step 2 and 3 allow you to sim/CID unlock
Mirror:
Kaiser Unlocker v2.0
FTP Problems!
Hi everybody,
Our provider has notified us of the fact that our ftp server has appeared in a list of compromised FTP servers which are known to host malware associated with attacks on banks and banking infrastructure. We have been requested to secure our systems. Since we realize it would cause serious problems to some if not most of our users if we we're to close it down immediately or change the password in the next 5 minutes we hope you can all live with the following arrangement:
We will close down the ftp server Monday the 9th of march on 09.00 CET. You have until then to download anything from our ftp server you (urgently) need, especially if you host software of which you don't have a back-up on our ftp it's important to download it asap. After closing down our server upcoming Monday we will remove all malware and start restructuring our server, implementing a new user structure, this does mean our server will be offline for a while and we cannot assure you no data will be lost.
If you have space available to host your own software please do so, if you have space available for those who do not have their own space please let it be known by posting a reply to this post. Our apologies for any inconvenience this will cause, but we hope to be able to serve you with a better ftp server as soon as possible.
Best regards,
Flar
Site admin.
Click to expand...
Click to collapse
Just to be safe!
Thanx Olipro
Sorry for asking, what do you mean by "your device must be in CE"?
Olipro said:
AS I said before.
REDOWNLOAD IT.
I just tested the flash on my Kaiser, it's fine, no pissing Model ID error at all.
however, to avoid any confusion, download AGAIN and this time you'll find that the version in the debug output is changed to v2.0
so if you don't see v2.0, you don't have the new one
Click to expand...
Click to collapse
I did re-download after you said it didn't work. I must have downloaded it before it was fully uploaded. I did see the V2.0 NOw...this time no errors.
Thanks again Works perfect now. Thank again.
It Works!
This is awesome. I was trying with Jocky's unlocker for couple of hours. No luck.
Gave a try to this tool. Unlocked first time. Now, I got to check my phone with a different provider SIM.
Thank you so much!
Done, but I saw that you have change the radio version to 1.70.xxx. What radio is this?
Does this mean that the unklocker installs Hard SPL permanently - so future rom flashes are possible? what does device in CE mode mean?
Penske MB said:
Done, but I saw that you have change the radio version to 1.70.xxx. What radio is this?
Click to expand...
Click to collapse
it's 1.58.something, i forget the rest
FTP will close today.!!!!!!!!!!!!!!!!
I try to download and uploade to mediafire
Midget Edit: Mirror removed, new version.
doesn't matter, I'm updating the FTP link in a second or two with the new one
Active sysnc
Hi Olipro,
Thanks for all the hard work.
When I try to run the step 1, it keeps on disconneting the active sysnc. Am I doing something incorrectly?
Cheers
Shan
elmoono said:
Does this mean that the unklocker installs Hard SPL permanently - so future rom flashes are possible? what does device in CE mode mean?
Click to expand...
Click to collapse
These were my steps,
1. Identified my AT&T radio ROM & downloaded that from XDA website as a backup. Pick from here
2. Ran Pof's HardSPL Link
3. Ran Jocky's SuperCID & Security Unlocker Link
4. Installed Dutty's Official WM6.1.2.19199 Full Version Link
5. Installed Radio ROM 1.64.06.04 Download
6. Installed .NET Framework 2.0 on my Windows XP SP2 from Microsoft website.
7. Ran OliPro's Kaiser SIM/CID Unlocker. Followed just step 2 & 3 since I had already installed HardSPL.
8. Installed Radio ROM 1.64.06.04 to get my ringtone & HSDPA connection.
May be my steps 3 ~ 5 were over kill but that was just me. If you would like to skip 3 ~5 make sure you have WM 6.1 installed also remember to patch your original radio on step 8.
All the above steps does not need a strange SIM. I am yet to pop in a different carrier SIM to confirm about my Tilt Unlock Status. However, after the above steps, I found "Kaiser Unlock.exe" under my Tilt root folder. I ran that from phone, clicked on check SIM Status, came up as "You are already SIM Unlocked"
Hope this helps.
when you run step 3, just query what simlocks are active
Worked on my AT&T Tilt!
Not sure about step one already had SPL done with Whitescreen Fix
I will try it monday when my friend brings his tilt over to get it unlocked.
I did have to install a 6.1 ROM (I used Dutty's Official) between steps 2 and 3, had a blank screen, using the att rom -bloatware.
So, I flashed Dutty's Windows Mobile 6.1 rom with no trouble. However, when I tried to install the radio, it only went to 95%. Additional tries resulted in it not even being able to start the process. It just stayed at 0%. (Is activesync suppose to be force-closed during the process?) I'm a total beginner, so any help is appreciated.
imzac said:
So, I flashed Dutty's Windows Mobile 6.1 rom with no trouble. However, when I tried to install the radio, it only went to 95%. Additional tries resulted in it not even being able to start the process. It just stayed at 0%. (Is activesync suppose to be force-closed during the process?) I'm a total beginner, so any help is appreciated.
Click to expand...
Click to collapse
Could you be more specified please:
Which ROM & Radio? There are quite a few radios as well as ROMS from Dutty.
People Read The Wiki Before Flashing It Tells You Everything!!!!
Radio: 1.27.14.09 Rom: Dutty's WM 6.1 5.2.19199 UC Compliant
imzac said:
Radio: 1.27.14.09 Rom: Dutty's WM 6.1 5.2.19199 UC Compliant
Click to expand...
Click to collapse
What radio version are you trying to flash? The 1.27.xx.xx listed above is a WM6 radio and it will not work with any 6.1 ROMs.
imzac said:
Radio: 1.27.14.09 Rom: Dutty's WM 6.1 5.2.19199 UC Compliant
Click to expand...
Click to collapse
Well, there is your first problem
No WM 6.1 ROM is compatible with a 1.27... radio.
In order for it to work, you MUST have a compatible 6.1 Radio.
That was the version I was trying to flash.
KAIS_Radinly_1.27.14.09_CustomRUU
So, I can fix it by finding the correct radio? I'm still having connection issues because of this forced ActiveSync close.
imzac said:
That was the version I was trying to flash.
KAIS_Radinly_1.27.14.09_CustomRUU
Click to expand...
Click to collapse
Will not work!
The Wiki will answer all your questions.
You will need a 1.58/1.64/1.65 radio.
kjb86 said:
Will not work!
The Wiki will answer all your questions.
You will need a 1.58/1.64/1.65 radio.
Click to expand...
Click to collapse
Thank for that answer. However, I see nothing concerning why phone isn't connecting correctly, which I think is the main problem.
imzac said:
Thank for that answer. However, I see nothing concerning why phone isn't connecting correctly, which I think is the main problem.
Click to expand...
Click to collapse
whats not connecting?
To my computer. Everytime it gets to the point where its "verifying information on your PDA phone" activesync closes out automatically. Then it says Error 264 and tells me to try again. Then activesync comes back. For any rom that I run. Now, because I'm the bootloader state, I can't connect to my computer initially like I did before. Does that matter?
Okay, a simple soft reset got it all the way to the percentage bar. However, it stays at zero and come up with that same connection message. Then, I have to go through the recovery process and nothing changes after that.
Sounds like you messed up. anyway dd you have hardspl installed should be question number 1 and if all else fails use jockys FrankenKaiser and totally reset your phone.
austinsnyc said:
Sounds like you messed up. anyway dd you have hardspl installed should be question number 1 and if all else fails use jockys FrankenKaiser and totally reset your phone.
Click to expand...
Click to collapse
it doesn't sound like he has hardspl installed if he is attempting to upgrade his radio and it is stuck at 95%.
What are my options then?
imzac said:
What are my options then?
Click to expand...
Click to collapse
Are you still stuck in bootloader mode?
Yes. Is my phone a paperweight now?
If you are stuck in bootloader then download the file I attached. Next, follow these steps:
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
After you follow these steps search for hardspl before you attempt to flash anything else you can brick your phone if you do not have hardspl installed. You're playing with fire right now messing with your device without reading. Hopefully this helps you.
here is hardspl for you. please read the attached instructions.
Actually use the kaiser-hardsplv1
I don't see WCEUSB001 in PORT. I stopped the sync processes.
The screen remains black, blank, and does not light up, even though activesync knows the device has booted because the icon becomes green. I can't navigate any controls, though the keys do light up when I slide it, or press buttons. Screen remains blank/black.
Here is what I did to get to this state:
1) I first hard reset my Kaiser, to reset all user preferences. This I accouplished by pressing both soft keys while pressing power (if I recall correctly), then hitting the green call button. It then installed Windows Mobile fresh.
2) I then followed the HardSPL instructions, here:
http://forum.xda-developers.com/showthread.php?t=361236
Everything went fine.
3) I then followed the Kaiser Sim Unlocker instructions here:
http://forum.xda-developers.com/showthread.php?t=361039
After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stays that way.
What should I do? Did I miss something? Is this recoverable?
It also does not have any sound. Does this mean I can't unlock?
How do I flash back to the original rom?
Ok, looks like have version 1.27.12.11 rom, during boot.... according to this page it isn't ok for my AT&T Tilt device.
http://forum.xda-developers.com/showthread.php?t=393182
So does this mean I have to pay to unlock? Or is there some way to do it still? Thanks.
NetTechie said:
Ok, looks like have version 1.27.12.11 rom, during boot.... according to this page it isn't ok for my AT&T Tilt device.
http://forum.xda-developers.com/showthread.php?t=393182
So does this mean I have to pay to unlock? Or is there some way to do it still? Thanks.
Click to expand...
Click to collapse
Try flashing this radio.
http://www.4shared.com/file/36681926/36b4832d/KAIS_Radio_Only_1271211_CustomRUU.html
I guess you didn't read step 10
I have a problem... it wont go green now, I can't get activesync to go green. I wont be able to load the rom... what can I do?
[ EDIT ]
A reboot fixed this *sigh of releif*. Goes green now.
AllTheWay said:
Try flashing this radio.
http://www.4shared.com/file/36681926/36b4832d/KAIS_Radio_Only_1271211_CustomRUU.html
I guess you didn't read step 10
Click to expand...
Click to collapse
Ok, question: Will I use the file in Step 3 to put that on the phone? It is saying there is a file open...? I can't disable USB on the device, as the screen is blank.
[EDIT] Looks like everything I needed was in the download. I put the other ROM back on. However, I'm having a problem with activesync... When I click on Connection Settings active sync freezes up. Any ideas what to do to fix ActiveSync so I can turn off USB, without crashing ActiveSync?
Okay, I got the screen with the unlock code... only it gave me this readout:
Your Unlockcode = ........
just like that, with dots.
Is there any way to unlock a phone, if the screen goes black? I can go back to the old firmware, but this special firmware is needed I think to do the unlock, and this special firmware makes the screen go black on my model.
EDIT: On page 33 of the Kaiser unlocker topic, I found what looks like my answer. I need the AT&T 1.57 ROM, as it is compatible with this patched radio so the display will work. Unfortunately, I haven't been able to find it on this forum yet. EDIT 2: Found it, loading it on now: http://www.4shared.com/file/3857459...ULAR_WWE_157_-_Originaly_Shipped_ATT_ROM.html
Unlock worked, once I had the AT&T 1.57 version of the ROM on there. ActiveSync still freezes, but I uninstalled it for the section where I was supposed to disable USB. Installed the 1.27.12.11 radio after completing the unlock, replacing the patched radio. All finished.
Mine still showsup Blank screen
Hi,
I followed the same steps as yours :
Firstly I reset my Kaiser & then followed the HardSPL instructions, here:
http://forum.xda-developers.com/showthread.php?t=361236
Everything went fine.
I then followed the Kaiser Sim Unlocker instructions here:
http://forum.xda-developers.com/showthread.php?t=361039
After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stays that way
Now I tried flashing
http://www.4shared.com/file/36681926...CustomRUU.html
But it didnot help (
Can you please tell me what I should be doing next..
vrramakanth said:
But it didnot help (
Can you please tell me what I should be doing next..
Click to expand...
Click to collapse
what do you mean when you say it "didn't help"?
I still get the blank screen..I am now downloading the AT&T 1.57 version .. I am hoping if I install this I will get the display and I can proceed to step 8a, 8b,..
Sorry to be short,
But did you even bother reading through the other threads with the exact same problem as you?
the problem you have is that you flashed an incompatible radio with the ROM that you are runing on the phone. You need to reflash the ROM with a rom that is compatible with the radio or reflash the radio rom to what came with the phone rom that you are running.
You should have upgraded to a 6.1 cooked rom prior to doing the SIM/CID unlock.
Flash your phone with a cooked 6.1 rom that INCLUDES the radio, and then try the CID/SIM unlocker.
my two bit.
I am trying with http://www.4shared.com/file/38574592...d_ATT_ROM.html, which is the ROM that comes with this phone. Do u think this helps? Do u want me to flash 6.1 ROM instead of this?
No,
Unless you know the stock ROM comes with a compatible radio, it will not work. The problem you are having is because you loaded a radio that is not compatible with the stock rom.
If you already have hardspl loaded, then load a cooked 6.1 ROM that includes a compatible radio (for example L26 v9 rom or Sleuth 3.0 rom).
ok..am a BIG novice here..may be a bad question..I have Windows 6.0 on the mobile..so the Cooked 6.1 ROM L26 that I found http://forum.ppcgeeks.com/showthread.php?t=26925 fits into this? Do I need to upgrade to 6.1 before this? sorry if its a wrong question ..
vrramakanth said:
ok..am a BIG novice here..may be a bad question..I have Windows 6.0 on the mobile..so the Cooked 6.1 ROM L26 that I found http://forum.ppcgeeks.com/showthread.php?t=26925 fits into this? Do I need to upgrade to 6.1 before this? sorry if its a wrong question ..
Click to expand...
Click to collapse
It's not a wrong question
1. Yes, that fits in
2. No, you do not need to upgrade to 6.1 before this, flashing the ROM will take care of it
hope this helps
Thanks mbarvian!!
So I am Installing the upgrade to 6.1 ROM, but do I still need to install the correct AT&T ROM that you gave me in the other thread http://forum.xda-developers.com/showthread.php?p=2452022#post2452022?
Thanks!!
Alibaba0101 said:
No,
Unless you know the stock ROM comes with a compatible radio, it will not work. The problem you are having is because you loaded a radio that is not compatible with the stock rom.
If you already have hardspl loaded, then load a cooked 6.1 ROM that includes a compatible radio (for example L26 v9 rom or Sleuth 3.0 rom).
Click to expand...
Click to collapse
I now installed a 6.1 ROM..now do I need to downgrade to be able to do SIM unlock?
From http://forum.xda-developers.com/showthread.php?t=361039 it says :
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Click to expand...
Click to collapse
vrramakanth said:
I now installed a 6.1 ROM..now do I need to downgrade to be able to do SIM unlock?
From http://forum.xda-developers.com/showthread.php?t=361039 it says :
Click to expand...
Click to collapse
Yes, now you would want to download and flash the ROM I gave you in the other thread
here's the link:
http://rapidshare.com/files/55298724/RUU_Kaiser_CINGULAR_WWE_.exe
I am trying with http://www.4shared.com/file/38574592...d_ATT_ROM.html is this fine??