Does this update take a long time to download? I have been waiting for quite a while and no indication that it is downloading. No progress on download.
Depends on your network connection, of course - it's ~100MB in size. Probably no more than 10 minutes unless you are running DSL / dial-up.
I looked on VS site and link to update gives 404 error. Heavy traffic cause this error? Not sure exactly how to manually install update.
WantADroid said:
I looked on VS site and link to update gives 404 error. Heavy traffic cause this error? Not sure exactly how to manually install update.
Click to expand...
Click to collapse
Are you looking at this website? Download still there for me.
http://tapntap.http.internapcdn.net/tapntap/viewsonic/update-smb_a1002-3389-user.zip
My attempt hung the first time (sat at 2% or so with no error), I rebooted and tried again. The download took about 5 minutes over cable modem.
Related
So today I was following the guides on the forum to prepare for flashing my Desire HD for the first time.
After I downloaded ROM Manager and clicked "Flash ClockworkModRecovery" to download the tool. I get the message "Error while downloading from server", ensure stable internet connection and SD card availability. Well I confirmed both. But it still didn't work. I went to the official homepage for ClockworkMod Recovery and it states that it's currently offline, with a countdown on the page (464 days 18hrs 10min......)
Does anyone know about the servers being down or have encountered the same problem before? Will it come back in a few hours maybe?
ij
Releevo said:
Will it come back in a few hours maybe?
Click to expand...
Click to collapse
it will come, after a few hours, but only if someone didn't woke up thread old 10 years
Anyone still facing update problem that kies disconnects and no OTA update available?pls tell me.
And also tell if anyone have figured out the solution.
Well kind of...I received the updates and I didn't receive the updates as well....Well to be clear, yesterday I got the updates and left it overnight to download (I live in Nepal where downloading 240 megs take 4 hours)....and when I woke up this morning, the internet connection was lost at sometime during the night (that again is not unusual in my country)...and now when I try to update it says.....NO UPDATES AVAILABLE!!!....I don't know what's the problem with samsung....
I heard somewhere in the forum that they are rationing the release of updates so as not to put too much load in the servers...so I guess my time is up....I guess now I have to update it via kies...
Update: it has resumed...I am downloading it again...I hope I don't get disconnected in the middle...
Sent from my GT-P3113 using xda app-developers app
yep , keis wont stay conected cant even backup the thing.
cant get a good zip file ( ones i have donwloded say invalid zip)
saw a popup on Samsung updates that says they are having datacenter problems. so ill try downloading again later if i can unzip the file i will odin flash it
Hello Everybody,
A few days ago, I tried to check if I have an update possibility. The phone via OTA noted that there is an available update, and started to download it. After the download the preparation went through (it was strange that during the preparation the progress bar from 81% immediately jumped to 95%, but apart from that there was nothing special). After it showed the error message what is in the subject: 'The update was downloaded...' and error code 8007000d.
I've tried to do a search on the net without any luck. I tried to update after a factory reset, of course haven't solved the problem.
Finally, I downloaded care suite, connected to it my phone, and it said that my phone software is up-to-date. So what the f..k? OTA says there is an update, care suite says my phone is up-to-date?
I also tried to find an eligible update from navifirm but for the product code I have (based on the data provided by care suite) there are nothing.
Does anyone have some idea what is going on around my phone?
zsitvayb said:
Hello Everybody,
A few days ago, I tried to check if I have an update possibility. The phone via OTA noted that there is an available update, and started to download it. After the download the preparation went through (it was strange that during the preparation the progress bar from 81% immediately jumped to 95%, but apart from that there was nothing special). After it showed the error message what is in the subject: 'The update was downloaded...' and error code 8007000d.
I've tried to do a search on the net without any luck. I tried to update after a factory reset, of course haven't solved the problem.
Finally, I downloaded care suite, connected to it my phone, and it said that my phone software is up-to-date. So what the f..k? OTA says there is an update, care suite says my phone is up-to-date?
I also tried to find an eligible update from navifirm but for the product code I have (based on the data provided by care suite) there are nothing.
Does anyone have some idea what is going on around my phone?
Click to expand...
Click to collapse
And finally I am on Portico...
The OTA update showed up this morning. I chose to delay it because I was going to need my phone. Went to update it later and it just would not download. Did a factory reset and now when I go to system updates it says "checking for available update." for about a minute then says "check for update is not available at this time. Try again later." What am I missing here?
dwcosby said:
The OTA update showed up this morning. I chose to delay it because I was going to need my phone. Went to update it later and it just would not download. Did a factory reset and now when I go to system updates it says "checking for available update." for about a minute then says "check for update is not available at this time. Try again later." What am I missing here?
Click to expand...
Click to collapse
there have been quite a few people with this same issue. i havent seen any direct fix.
if you are locked, i would suggest you wait it out, or wait for the sbf file to get leaked. there is a way to sideload it, but its risky being locked and no sbf to save you if a problem comes up.
if you are unlocked, there are directions in the General forum to sideload the ota. there is no risk if you are unlocked.
if you are locked, the only thing i would suggest to try is re-flashing the stock 9.30.1 with rsd and see if it will pull the update afterwards. there is no guarantee this will work, but your phone will be 100% clean stock after the flash and give you the best chance to grab the ota if available.
dwcosby said:
The OTA update showed up this morning. I chose to delay it because I was going to need my phone. Went to update it later and it just would not download. Did a factory reset and now when I go to system updates it says "checking for available update." for about a minute then says "check for update is not available at this time. Try again later." What am I missing here?
Click to expand...
Click to collapse
Did you download it and then said to apply it later? If so, are you rooted? If so, hook up your phone to your PC and adb shell into it. Type "su" and hit enter to go into superuser mode.
Navigate to the /cache directory and you should see the OTA .zip file sitting in there. Copy it to your external SD card and then you can load it manually via the recovery.
If you're not rooted, then you won't be able to navigate into the /cache directory. Or, if you didn't have it download when you got the notice (or couldn't download it), then it won't be there.
More update issues
My wife & son both have the HD. My wife checked for the update this morning, said it was ready and proceeded to download. Update did as it was supposed to and when it was done, she had KitKat and that's when things went a bit wonky.
If she has Bluetooth turned on, WiFi connection drops after a few minutes. She googled possible workarounds and none really worked. As long as she is not using BT, WiFi stays up
Has anyone else seen this behavior? She refuses to let me root it and install a custom ROM as I have done on my Samsung GS4 from VZW.
In the mean time, we've told our son not to take the update until
we know more about a possible fix.
zeb carter said:
My wife & son both have the HD. My wife checked for the update this morning, said it was ready and proceeded to download. Update did as it was supposed to and when it was done, she had KitKat and that's when things went a bit wonky.
If she has Bluetooth turned on, WiFi connection drops after a few minutes. She googled possible workarounds and none really worked. As long as she is not using BT, WiFi stays up
Has anyone else seen this behavior? She refuses to let me root it and install a custom ROM as I have done on my Samsung GS4 from VZW.
In the mean time, we've told our son not to take the update until
we know more about a possible fix.
Click to expand...
Click to collapse
Fix was just posted recently. do a factory reset. It sucks, but its the only option.
Factory REst doesn't solve 4.4.2 WIFI issue on Razor MAxx HD
TXKSSnapper said:
Fix was just posted recently. do a factory reset. It sucks, but its the only option.
Click to expand...
Click to collapse
Android V 4.1.2 worked flawlessly since Nov 1023 upgrade. Decided to upgrade to KitKat via OTH. Had WIFI connection issues right away ( inability to obtain IP or lost connection, etc.) This happened with Bluetooth ON or OFF, no difference. The Signal strength was much lower than when on the previous android version and subsequent indicated connection speed was at least 1/2 of what I was getting previously.
Worked with Verizon and Motorola tech support personnel and did multiple factory resets with no improvement.
Since I wanted a factory solution and had insurance on the phone, I ordered a replacement phone. Thankfully, the new phone had 4.1.2 and worked perfectly. WIFI issues are gone.
Conclusion, KitKat is not ready for prime time yet. WIFI bug needs to be worked out before I will upgrade again.
egutwillig said:
Android V 4.1.2 worked flawlessly since Nov 1023 upgrade. Decided to upgrade to KitKat via OTH. Had WIFI connection issues right away ( inability to obtain IP or lost connection, etc.) This happened with Bluetooth ON or OFF, no difference. The Signal strength was much lower than when on the previous android version and subsequent indicated connection speed was at least 1/2 of what I was getting previously.
Worked with Verizon and Motorola tech support personnel and did multiple factory resets with no improvement.
Since I wanted a factory solution and had insurance on the phone, I ordered a replacement phone. Thankfully, the new phone had 4.1.2 and worked perfectly. WIFI issues are gone.
Conclusion, KitKat is not ready for prime time yet. WIFI bug needs to be worked out before I will upgrade again.
Click to expand...
Click to collapse
That's a shame because for me, the FDR fixed the Wifi/Blue-tooth issue as it did for many others. Might have been a hardware issue (faulty radio, etc).
Hi all,
Hoping this is an easy fix someone has seen before.
I have a used 16gb wifi version that I'm trying to update to 5.1.1.
The OTA download works OK, but when it says flash and reboot, the progress bar only gets about 20% along and then shows an "Error" message over the robot.
Wiped the download and redone the OTA a few times with same results.
Not so concerned about getting the update as I am in trying to figure out if the device is part of the recall or not.
I think that the system may have been loaded with a custom ROM by the previous owner but it looks to be put back to factory. Don't know if it is left in a weird state of locked/unlocked/rooted or not or if that should matter.
Thanks
Ron
Make sure you are getting the full update. Should be more than 700 mb. In system update click the 3 dots and select the full ota.
Resolved- Thanks
frenziedfemale said:
Make sure you are getting the full update. Should be more than 700 mb. In system update click the 3 dots and select the full ota.
Click to expand...
Click to collapse
Hey, thanks.
I found this just before your reply by accident when my son wanted to try the update ONE MORE time and hit the 3 dots by mistake. Just caught the word "full' before the window closed and went back to give that a try.
All the other devices in the house are Nexus so this new device was a bit of an anomaly that I wasn't used to.
Update worked just fine but now looks like we wait for the recall replacement to come in
BR
Ron