hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i tried to update my rom through boot loader mode but again failed
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
guys please give me Advice and solution for this g3 g4 Problem
i even tried sending my phone to service center but stupid people dont know how to solve it and they returned me back
Thanks in Advance
You have bricked your phone... You just can't install a G4 rom on a G3 phone... Different chipsets are the cause of the problem... Sorry
you mean to say its over ?????????????
there should be any way
You'll have to wait to see if Jesterz manages to produce a goldcard...
BTW a goldcard it's basicly a mem card with a rom in it that autoinstalls itself thus no need for the usb connection... This fits your case cause you don't have an active usb conection because of the driver/chip conflict...
wrong software
I have the same problem i tried to flash my g3 with jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 by mistake and it was ok until the end of process when i finich it with congratulations and bla bla my device stills in the bootloader mode all the time. I can now connect and start to flash but when it comes to 80% of the process it stops with error 360 wrong command. Pleas is there any help for some kind of downgrade flash or so because it can only get boootloader but never start with software. When I try with jesters RUU-Prophet-g3-AKU2.2-2.20-2.47.21-Jester-r1 the whole process finish ok but the phone stills in bootloader. The same thing is also with RUU-Prophet-g4-AKU2.2-2.20-2.47.21-Jester-r1 I can not execute step2
that's why you should read the "sticky" first before you do it.
I have a Dopod 818Pro from a friend of mine but in Chinese ROM, so I have to read a whole nite the sticky and found out what is my Dopod version, finally I found it is G3, so I did all the steps, from unlocked the CID till upgrade to Jester latest ROM for G3 and skip the G4.
please help
Yes i realy know that it was my fault and my big mistake so i vould not do it again but now i need help because it stills in bootloader i i can even start flashing the device that gives me hope that some kind of recovery is maybe possible.
Yes i also commited this mistake its my fault but i really need help my device still enters into bootloader mode.
ur problem
there is nothing to do anymore u have to wait u CANT DO ANYTHING ITS OVER
how do you mean it is over. Do you think that could not repair it. Is it possible with sd card or jesters gold card and how. Help me please if somebody knows
there must b some way to overcome this problem
jesterz's gold card isn't working yet, and for now it's only for G3...
My hardware is G3 but flashed by mistake with G4 and now is in bootloader mode so i can start flashing but i do not know with what and how. Could you please explain me how and where can i find and use goldcard for g3 if possible Thanks
have u tried holding the camera button while softreset and then flash rom again
Yes sure i tried to flash rom from jesters for g3 which is for my device instead jesterz g4 what i used by mistake and it passed ok but when i restart it stills in bootloader mode only, so i could flash but do not know which firmware should i use
i've the same symptomes as mjankovic and aarif_ziaee, (bricked my phone)
but the only things i think i've forgot, is to cid unlock my device before doing the step 2
i have a question.
i have the rom PDAMobiz_Prophet_WM5AKU3.3_v3301
(witch is not an auto installable tile, it's a folder containing exe, dll, bat and nb file)
is it possible to install it by using teraterm pro or mtty? (connected and install bats and cabs by thoses software)
ps : i'm sorry for my bad english, i'm french not going to my languages faculty since i'have bricked my phone. need to fix it soon !
i've download "Andot's V6 Perfect English Edition Windows Mobile 6 for HTC Tornado "
flashing was successfull... but after reboot i can see only boot screen reed green blue..
i try to connect to phone with tera term.. but i have only alert named "cannot open"
what can i do ? anyone could help me ?
i can't do anything now help please
Flashing was not succesful, follow my guide on my signature, did you format BINFS ?
i did not.. sorry
i already fix it (boot load only)
i have now AKU2 update and i cant turn off security
there is always wrote in window : "Phone is not unlocable"
I cant do anything with that problem..
i was looking for unlock guids but they all dont work
Contact Orange and ask them to unlock your phone
bought jasjar 2 days ago and f***ed up him already, tried to flash and it went dead...
read a lot of stuff nothing helps
btw i use WIN VISTA so i suspect it require a diffrent approach than XP
1.tried mtty 1.42 ,usb not open .
2.tried BL exit, wont budge.
3.tried to reflash and get connect error.
plz o plz can any 1 find a solution?
the answer
found the answer at http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,64,29174:)
Sorry deleted post, I have solve it!
Joc
Hello all,
i whas following this guide http://forum.xda-developers.com/showthread.php?t=625200 and evrything whas oke till step 3 where i need to get bootloader mode .
its seems to be gone :s nothing works camera+reset, all the tips and tricks doesnt work for me ,my phone just starts up and hangs at smart mobility.
no more bootloader mode.
any way of flashing from the sd whitout bootloader?
thx in advance
Fuggy said:
Hello all,
i whas following this guide http://forum.xda-developers.com/showthread.php?t=625200 and evrything whas oke till step 3 where i need to get bootloader mode .
its seems to be gone :s nothing works camera+reset, all the tips and tricks doesnt work for me ,my phone just starts up and hangs at smart mobility.
no more bootloader mode.
any way of flashing from the sd whitout bootloader?
thx in advance
Click to expand...
Click to collapse
out and replace the battery your phone, then take it to go to 3 color boot mode and can reFlash Rom again !!! if still can't you'd better sell it to me (with the proper price) Hi hihiiii
Hello all, I have a problem because when you unlock my mobile phone started looping off and in general does not start.
I can not enter into TWRP because I gave erase all data.
What do I need to download? Where all this throw?
Im from poland and I do not know which version of the software should be good
I would greatly appreciate if anyone will be able to help me!
I download old firmware 5.1.1 from producent page i put dload folder on sd card and this is what happens
https://youtu.be/OyyD1vd8NHA
If i connect usb cable to phone, instalation started, but its stuck on 90%
Phone is unlocked, but adb dont see my phone in fastboot mode!
Im write another thread because in http://forum.xda-developers.com/honor-4c/help/broken-honor-4c-t3385711
no one want to help me!
refresh
ShowMustGoOn said:
Hello all, I have a problem because when you unlock my mobile phone started looping off and in general does not start.
I can not enter into TWRP because I gave erase all data.
What do I need to download? Where all this throw?
Im from poland and I do not know which version of the software should be good
I would greatly appreciate if anyone will be able to help me!
I download old firmware 5.1.1 from producent page i put dload folder on sd card and this is what happens
https://youtu.be/OyyD1vd8NHA
If i connect usb cable to phone, instalation started, but its stuck on 90%
Phone is unlocked, but adb dont see my phone in fastboot mode!
Im write another thread because in http://forum.xda-developers.com/honor-4c/help/broken-honor-4c-t3385711
no one want to help me!
Click to expand...
Click to collapse
Thread closed.
Duplicate:
http://forum.xda-developers.com/honor-4c/help/broken-honor-4c-t3385711
Do not duplicate posts. Be patient and wait for a response in your original thread.