Hello all,
i whas following this guide http://forum.xda-developers.com/showthread.php?t=625200 and evrything whas oke till step 3 where i need to get bootloader mode .
its seems to be gone :s nothing works camera+reset, all the tips and tricks doesnt work for me ,my phone just starts up and hangs at smart mobility.
no more bootloader mode.
any way of flashing from the sd whitout bootloader?
thx in advance
Fuggy said:
Hello all,
i whas following this guide http://forum.xda-developers.com/showthread.php?t=625200 and evrything whas oke till step 3 where i need to get bootloader mode .
its seems to be gone :s nothing works camera+reset, all the tips and tricks doesnt work for me ,my phone just starts up and hangs at smart mobility.
no more bootloader mode.
any way of flashing from the sd whitout bootloader?
thx in advance
Click to expand...
Click to collapse
out and replace the battery your phone, then take it to go to 3 color boot mode and can reFlash Rom again !!! if still can't you'd better sell it to me (with the proper price) Hi hihiiii
Related
Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!
I Have the same problem
My sad story is…..
I purchased MDA Compact II a month ago. I changed its ROM with JAMin’s ROM (after unlocking with LOKIWIZ). The device was OK but camera was not working, so I updated it again with K JAM’s ROM process started 10% to100% as usual & massage appeared congratulation your device is updated successfully. The process was also running on my device as usual. But after that my device (I mean MDA Compact II) refused to start normally it just blinks LED & so LCD. (It is dead now) The PC doesn’t detect it no boot loader is available to update it with its original ROM that I got now. So if you find any thing plz help me & if I get any thing I promise I'll inform you my email adres is [email protected] plz mail me to have your email adress to comunicate
bye
azhar
Re: I Have the same problem
azhar63 said:
I changed its ROM with JAMin’s ROM
Click to expand...
Click to collapse
Why? :?
jun36 said:
Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!
Click to expand...
Click to collapse
if you say you can get into the bootloader with the AC cable then you should beable to download a SD card image on to the phone.
When plugged in it is not bootloader. Same thing happened to me and i tried the sd image rom. The screen looks like the bootloader but it is not. There are 3 colors and no mention of serial 1.x or whatever it is. I am going to send my unit in 4 repair. Look in the prophet forums there are 2 threads. One is titled upgraded prophet with wizard rom and the other thread is Can anyone help fix my brick. If anyone knows a fix it would be great but I think it has to be repaired by disributor.
Try this
Plz try this link u may fine something http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard
Hello,
I bricked my Huawei U8230 and can't do anything. I tryed to downgrade from 2.1 to 1.5 as per all normal guides. Everythig was fine in the begining, the whole proces was perfect till the moment when the phone needs restart. When i restart it everything is colapse. I see only black and white stripes and nothing else. I can't repeat the procedure, can go in recovery mode, can't start superboot ... nothing. Do you know any program as Phoenix for Nokia for flashing a dead phones or any way for bring it live?
Please help !
Thank you in advacne!
So my phone got bricked ! It had the fastboot error , after i did the recovery crap on cmd it only showed lg startup logo , but i was able to go to emergency mode ! Now my phone wont turn on at all . I followed these instructions : http://forum.xda-developers.com/showthread.php?t=875881
Please explain me , is there a way to fix this ?! Will i be able to exchange for a new phone if i still have the guarantee for my phone ? What should i do i am pretty desperate i don't want my mom to kill me lol .
PacManOG said:
So my phone got bricked ! It had the fastboot error , after i did the recovery crap on cmd it only showed lg startup logo , but i was able to go to emergency mode ! Now my phone wont turn on at all . I followed these instructions : http://forum.xda-developers.com/showthread.php?t=875881
Please explain me , is there a way to fix this ?! Will i be able to exchange for a new phone if i still have the guarantee for my phone ? What should i do i am pretty desperate i don't want my mom to kill me lol .
Click to expand...
Click to collapse
P.S
I mean doesnt turn ON !
When you KDZ... ALWAYS " DISABLE " LG USB MODEM in Device Manager.
See if your phone enters emergency mode. Search this forum.
If its under warranty.. they might replace it for free but dont tell them you rooted your phone or anything!!
rr0yy said:
When you KDZ... ALWAYS " DISABLE " LG USB MODEM in Device Manager.
See if your phone enters emergency mode. Search this forum.
If its under warranty.. they might replace it for free but dont tell them you rooted your phone or anything!!
Click to expand...
Click to collapse
I did disable LG USB Modem . I know what is emergency mode i mean i cant do ANYTHING , its like put it to a pc or a charger take battery out try the same put the batery in the same , nothing . It simply doesnt want to turn on
Edit :
Ok so i found out .
Bricked means dead = i have to get a new phone , had the phone for only 2-3 months , so i have the guarantee , hope they will exchange it for a new one or let them fix it by replacing the circuit board or something
Here
If its not entering Emergency.. there is no other way to recover. Go to Service Centre!!
Hey guys, what's up?
I am having a problem with my moto G.
I tell you .. When I turn on the phone, goes directly into fastboot mode (press only on) .. And down I get the legend 'UTAG "bootmode" fastboot configured as' ..
Now, if I select Normal powerup in there, the phone starts without problems .. If I select recovery also goes there without problems ..
I mean that the only thing that happens is that the mobile is turned directly into fastboot mode .. and then select an option works normally.
Nor do I have problems to flash firmware or partitions using fastboot or mfastboot q .. tried everything I can think, I spent x number of firmwares and always the same.
I think .. I repeat, I THINK all started after flashing the GPE ..
I hope someone has information or any idea about it .. My mobile is xt1032
regards
ChristianB13 said:
Hey guys, what's up?
I am having a problem with my moto G.
I tell you .. When I turn on the phone, goes directly into fastboot mode (press only on) .. And down I get the legend 'UTAG "bootmode" fastboot configured as' ..
Now, if I select Normal powerup in there, the phone starts without problems .. If I select recovery also goes there without problems ..
I mean that the only thing that happens is that the mobile is turned directly into fastboot mode .. and then select an option works normally.
Nor do I have problems to flash firmware or partitions using fastboot or mfastboot q .. tried everything I can think, I spent x number of firmwares and always the same.
I think .. I repeat, I THINK all started after flashing the GPE ..
I hope someone has information or any idea about it .. My mobile is xt1032
regards
Click to expand...
Click to collapse
Solved ..
fastboot oem fb_mode_clear
Greetings.
help me
ChristianB13 said:
Solved ..
fastboot oem fb_mode_clear
Greetings.
Click to expand...
Click to collapse
hey pls help out i m trying to unroot my moto g nut after
unroot proses my phone getting Problem at startup is show only unlock warring pls help me out pls :crying:
nofear2430 said:
hey pls help out i m trying to unroot my moto g nut after
unroot proses my phone getting Problem at startup is show only unlock warring pls help me out pls :crying:
Click to expand...
Click to collapse
What is your problem exactly? Show me a picture, or tell me what good sucede.
And... what method did you use to unroot
ChristianB13 said:
What is your problem exactly? Show me a picture, or tell me what good sucede.
And... what method did you use to unroot
Click to expand...
Click to collapse
1st i root my moto g this method
http://forum.xda-developers.com/showthread.php?t=2684234
all is going well after root but ...
i decide to unroot phone
i use this method
http://forum.xda-developers.com/showthread.php?t=2542219
used tihs rom RETAIL-ASIA_FALCON_14.10.0Q3.X-84-7-LCG-2_cid7_CFC_1FF_SVC.xml
after that ahhhh only warning mgs cone after that nothing
this is image
http://tinypic.com/r/2wgf1aa/8
pls help out
i am new for this pls guide me
I've been trying to root my phone for the last few days, everything just seems to be going badly.
I was finally able to unlock the bootloader, and i wasn't able to flash TWRP
after trying to get it to work and faffing around in recovery. I some how have got my phone in an endless loop. But not just an endless loop, but after the phone logo comes up, my phone's screen goes all glitchy and crazy with loads of colour. I can go into fastboot mode all ok, but now i can't access recovery mode anymore it's the same as normal mode.
I have no idea what's going on
i can't flash anything, when i do i get the message USB Transferring ... USB Transmission OK
Hi !
This looks like a soft brick but can you tell us more about your device ( model , software ) ?
Thank you
It's a BLU Vivo 6. it runs android marshmallow
AHappyLittleFishy said:
It's a BLU Vivo 6. it runs android marshmallow
Click to expand...
Click to collapse
Hi !
Some devices just can`t be unlocked without a prover support from the manufacturer
You can search for more on Google and wait for development , your case is far from unique
I see that you have alredy posted same issue here
https://forum.xda-developers.com/an...oot-device-t3546400/post70765622#post70765622
Thread closed