Related
This is only the rosie apk it will not make everything green on the fresh Rom. This is best used on modaco, obelisk79 roms or TTG roms. If I have time I will make another flash to make everything green on the fresh Rom but I don't run the fresh rom so we will see. I love the speed of fresh but not the transparent stuff. It was just easier for me to stick with the obelisk79 modaco Rom since I already nandroided with it and my apps2sd and it will FC if I flash it over my hacked up obelisk79 Rom.
For anyone that want to use it here is the zip for espresso rosie in green.
Nandroid Backup First.
I am not responsible for anything this does. I made this for myself and figured i would share it for anyone that want to try it.
I get no FC's or problems flashing this.
Just put on SD card and flash from recovery.
DOWNLOAD HERE
-James
Thanks for posting this, I flashed it on to ttg v0.15 Rom
ahhh... hey Flipz... u hear this these guys love the green too. haha
I had already made a green espresso (at toast's request) and we put it in the 2.1 rom on the same day that I released fresh 1.1. I just never released it for fresh.
Damn you toast lol. Doesn't matter... can't please everyone! haha.
dont listin to them FLIP were still waiting for that clear water theme to make its way to 1.1
flipzmode said:
I had already made a green espresso (at toast's request) and we put it in the 2.1 rom on the same day that I released fresh 1.1. I just never released it for fresh.
Damn you toast lol. Doesn't matter... can't please everyone! haha.
Click to expand...
Click to collapse
ROFL!!!!!!
i applied this update to fresh 1.1, and it doesn't make everything green, and the field where you enter text is now blueish green.
i didn't nandroid backup, does anybody have an update just to make this blue?
runsoverfrogs said:
i applied this update to fresh 1.1, and it doesn't make everything green, and the field where you enter text is now blueish green.
i didn't nandroid backup, does anybody have an update just to make this blue?
Click to expand...
Click to collapse
Always nandroid backup lol
This is rosie only the fresh Rom has many other modified apks so it will still have blue. I used this on a modaco Rom to get espresso. If you want everything green on fresh then you have to also change the framework apk. I am not sure about what other files he modified to make them blue. I know to change the blue to green you will need this and the framework file. I did not modify the framework files as mine are already not blue.
Check the ttg Rom thread for the original blue rosie download
installed over Modaco 2.0 and get a tone of FCs.
kraminc said:
installed over Modaco 2.0 and get a tone of FCs.
Click to expand...
Click to collapse
I guess this is now working for you as in another thread you posted that the white and blue are crashing.
Im still waiting for that blue clear water theme . Im feeling a little blue right now
Nice.
But anyway you can fix the apps drawer button on the left ? It's kinda wonky ? (sort of bulges on the right and bottom left)
grifforama said:
Nice.
But anyway you can fix the apps drawer button on the left ? It's kinda wonky ? (sort of bulges on the right and bottom left)
Click to expand...
Click to collapse
This bothers me too I will look into it. I didnt make the Rosie files so it was already like that. I will jump on photoshop and see what i can do with it one day.
flipzmode said:
I had already made a green espresso (at toast's request) and we put it in the 2.1 rom on the same day that I released fresh 1.1. I just never released it for fresh.
Damn you toast lol. Doesn't matter... can't please everyone! haha.
Click to expand...
Click to collapse
Well, I'll wait for when you release a Green Espresso theme for Fresh 1.1 (it's what I roll with) then since I imagne it will have updated APKs to match. If this doesn't make everything green again, then I'll wait for what you might eventually do.
Ceger
[CLOSED][ROM]Bone Stock & Stock Deodex ROM's Triumph-Now Resets Splash.img!![CLOSED]
Thread closed because I no longer own this device. The download links no longer work. Sorry for any inconvenience.
i just installed and wifi works but when trying to go online rebuts the phone, also the screen goes black and stays like that for like 2 minutes. And yes i did all the restores available.
Which ROM did you flash? Deodexed or Complete Stock?
deoxed one.
Hmm that's odd cause the woofing works fine on mine! Ill look into it!
Sent from my OC'ed Triumph!
b_randon14 said:
Hmm that's odd cause the woofing works fine on mine! Ill look into it!
Sent from my OC'ed Triumph!
Click to expand...
Click to collapse
Same here it works... weird, this is the fix for me that got the wifi functioning again. But then again, I flashed b_randon14's stock theme zip, not this one.
If you want deodex I would recommend that one, more confirm it working at least right now.
Stupid question perhaps, but will apktool properly decompile and recompile framework-res.apk? I ran into a doozy of a problem trying to do that with somebody else's ROM.
Yeah it decompiles just fine! I have done it a thousand times!
Edited op with the zips that will reset the splash.img back to factory as well!!!
Thanks and I'm going to have to try this one out now.
Is the Android logo text hidden deeper in the system than I originally thought? I've actually seen it on my new phone a couple of times now, after reverting different things. You know, the flashing "android" text...
When there is no boot animation, it reverts to the flashing android logo. Its in the framework Res under assets/images. The boot logo(red Motorola logo) is on the same partition as the recovery image as a splash.img. to flash it I have the recovery mount that vfat partition as sd-ext and copy over the the splash.img its the same way I flash recoveries from cwm.
The bootanimations( red Motorola animated logo then cm splash animation) is locates in /hidden/data/power-on animation.
Sent from my MOTWX435KT using Tapatalk
So I installed the deodexed version and I was able to use mobile wifi tether with barnicale without having to change the MTU for the Motorola Triumph!
Once you change the MTU once on a computer, you never have to change it again... you sure it's not just a residual effect?
primetechv2 said:
Once you change the MTU once on a computer, you never have to change it again... you sure it's not just a residual effect?
Click to expand...
Click to collapse
I'm quite well aware of that. I did it on my laptop, but not my desktop. but my desktop was able to connect online with the tether. i guess i should try it on another machine to make sure.
Is there any advantage with the deodexed version over the odexed version if your goal is to restore the phone to stock after having another ROM installed?
Selling my Motorola Triumph to a friend - I've been running CM7 since the alpha days, so I need to go back to stock. I still have a nandroid of the stock ROM, but that also has a lot of installed apps, not to mention personal information/passwords. Will the complete stock ROM allow her to activate the phone?
InfamousBlade said:
Selling my Motorola Triumph to a friend - I've been running CM7 since the alpha days, so I need to go back to stock. I still have a nandroid of the stock ROM, but that also has a lot of installed apps, not to mention personal information/passwords. Will the complete stock ROM allow her to activate the phone?
Click to expand...
Click to collapse
It should.
I know this thread is about a year old, but thanks for the stock files.
I had CM7 running on my daughters Triumph. I finally decided to just put both of my kids on my VZW family plan since the Gnex dropped to $50 each and Virgin Mobile's service is a complete waste of money.
I'm selling her Triumph now and the phone has to be stock in order for the new owner to activate it, so this came in handy.
Thank you very much!
Works perfectly. My girlfriend didn't want a buggy ROM ruining her Candy Crush games so I had to bring her back to stock. Took less than ten minutes! Tanks!
so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!
nvertigo said:
so my sgs4g was rooted and got on gb with the gb starter pack thread, after which i jumped around between a few roms and am currently running octaneGB.
however, it has always had stability problems, and i can't figure out why. possibly because i messed up bootloaders? i'm pretty sure it can't be the fault of the roms i flashed.
from here, all I want is a stable phone.
can i wipe the phone as it is and then use the oneclick heimdall SMS kj6? would this put me on rooted GB with CWM and good bootloaders? could i simply cwm flash a rom like valhalla after that?
any advice would be appreciated, thanks!
Click to expand...
Click to collapse
Yes, you can use the one-click to put KJ6 on there then flash a different ROM via CWM.
Personally I've had the best experience with Valhalla ROMs. Last night I just flashed RAVERX3X latest Valhalla Black build. Its low profile so it's quick and responsive, and even better, not a single instability issue.
Sent from my SGH-T959V using XDA App
thanks for the advice guys!
I did the first flash step, which worked successfully and rebooted my phone. then i tried to flash the bootloaders that came with it, but uploading PIT 1/10 failed, and it froze trying to end session. i pulled the battery and the phone seemed bricked, but i connected the cable and oneclick said it was connected (no download mode screen, no lights at all). so i did the initial one-click flash and let it reboot again, then flashed valhalla black.
nothing SEEMS to be wrong, but i'm a little scared. can anyone weigh in on what happened?
You're ok. I can't explain what happened but people have reported similar issues, nothing on the screen but it can be seen in ODIN, and were able to recover (as you did) just fine.
Sent from my SGH-T959V using XDA App
This section of XDA is small, but good in terms of quality.
I just flashed Raver's Cyanogenmod/Valhalla hybrid and it is smooth and stable.
One-Click...
At the beginning of the week, I still had Froyo on my device.
I used Bryan's one-click (SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click.jar)...
(I had a scare, too... which involved the so-called "Rainbow screen" -- but FB suggested I run the one-click, again and also to do the Bootloaders -- and everything turned out ok).
But, I needed to get CWM 5 (and, that particular one-click had CWM 3.0.2.8x)
So, I flashed an update of Bryan's kernel (sms-T959V-KJ6-v0.1.1-rc1-unsigned-update.zip)
And, because I was feeling overjoyed at all the goodness that I'd seen so far, I flashed RaverX3X's rc3.zip (from Team Acid's Source Forge site)...
And, life is really, really, really... good.
yep
+1 Valhalla black edition! Installed today and love love love.
ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!
nvertigo said:
ok... my phone is now crashing and rebooting all over the place after flashing valhalla black. it seemed fine for the first hour. should i try the one-click again? or did i not wait 10 minutes after flashing the rom, maybe?
anyone know what could be the problem?
thanks in advance!
Click to expand...
Click to collapse
Not sure about the crashing but I experienced reboots because of the kernel Valhalla Black uses. There are fixes out there for that part of the problem but what you should really is perform a factory data reset, do the one to get a ROM with CWM on it, then use CWM to install Valhalla Black per the instructions on the page for it. I've a feeling you'll be much more stable after that.
As for the 10 minutes, that's basically to allow your phone to rebuild the Davlik cache (cache with optimizations for your apps). Definitely let it sit while it does that just to be safe.
thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.
nvertigo said:
thanks yet again. will try this asap!
can i assume that my bootloaders are correct after the weird issues from the last page? you mentioned that it happened to several people, but it still bothers me that technically it never got past 1/10 uploading PIT file :x
also, regarding the problems with the kernel, can anyone point me to a kernel that works with valhalla final and is known to be fully stable? i want to try to do everything to get the phone usable.
Click to expand...
Click to collapse
If it was fully booting and you weren't getting the "rainbow" screen, then your boot loaders are fine. If in doubt, go check out bhundven's one-clicks, and run one of them - twice. The first time it doesn't let you check the boot loader box but the 2nd time it does.
Valhalla Final comes with bundven's beta 2c kernel. I believe people are running that without issue. Keep in mind Valhalla Final and Valhalla Black are two different ROMs with two different kernels.
I did a one-click back to stock (factory reset, cache wipes, etc.) & am running bhundven's latest beta kernel with no problems (thus far).
Hello,
I appreciate everyone here is from quite a technical background. I'm quite a noob with these things but hopefully this isn't a massive issue.
I have a HTC sensation (I'm in the uk) and I have been using cm7 for many months. I've just decided to download cm9 and install and everything was going smoothly until I get to the welcome screen.
I try to change English (USA) to English (uk) but this freezes the phone and makes it reboot. I go through this motion over and over again. Any ideas please?
When I updated to cm9, I assumed my phone was already s-off (to be honest I still don't know what this means but thought I did it when I installed cm7) so all I did this time was download cm9 and gapps to the root folder of the SD card. Then I opened rom manager, flashed clockwork recovery and went into recovery mode. I then wiped the data on the phone, wiped the cache, installed cm9 and then gapps and now I'm here!
Any ideas anyone? Many thanks in advance.
Repoman123 said:
Hello,
I appreciate everyone here is from quite a technical background. I'm quite a noob with these things but hopefully this isn't a massive issue.
I have a HTC sensation (I'm in the uk) and I have been using cm7 for many months. I've just decided to download cm9 and install and everything was going smoothly until I get to the welcome screen.
I try to change English (USA) to English (uk) but this freezes the phone and makes it reboot. I go through this motion over and over again. Any ideas please?
When I updated to cm9, I assumed my phone was already s-off (to be honest I still don't know what this means but thought I did it when I installed cm7) so all I did this time was download cm9 and gapps to the root folder of the SD card. Then I opened rom manager, flashed clockwork recovery and went into recovery mode. I then wiped the data on the phone, wiped the cache, installed cm9 and then gapps and now I'm here!
Any ideas anyone? Many thanks in advance.
Click to expand...
Click to collapse
Hi,
Once you are s-off,you do not lose it,unless you manually switch it on in fastboot.
Did you update your firmware before installing the new ROM?
malybru said:
Hi,
Once you are s-off,you do not lose it,unless you manually switch it on in fastboot.
Did you update your firmware before installing the new ROM?
Click to expand...
Click to collapse
Hi, many thanks for your reply. No I didn't update the firmware, I don't think it states this in the update instructions on the CM website - I assume I was supposed to update firmware?
What should I do now, considering the phone is in this silly loop (welcome screen to off to welcome etc...)
Repoman123 said:
Hi, many thanks for your reply. No I didn't update the firmware, I don't think it states this in the update instructions on the CM website - I assume I was supposed to update firmware?
What should I do now, considering the phone is in this silly loop (welcome screen to off to welcome etc...)
Click to expand...
Click to collapse
Hi,
The best guide on firmware update is HERE
Substitute ARHD for CM9.
Repoman123 said:
Hi, many thanks for your reply. No I didn't update the firmware, I don't think it states this in the update instructions on the CM website - I assume I was supposed to update firmware?
What should I do now, considering the phone is in this silly loop (welcome screen to off to welcome etc...)
Click to expand...
Click to collapse
The post above mine links to the best guide to get CM9 booting.
But in the mean time if you don't have the time to figure all that out (it's not hard, but it can take a little while your first time because you'll be extra careful and read all the instructions 100 times before each step) you can revert back to a Gingerbread ROM. I assume that's where you started, so if you have the Gingerbread firmware you can boo any Gingerbread ROM. That will only take about 5 minutes. So if you're in a rush to get a working phone right now just do that and it'll boot right up.
haha yes i read the instructions several times, although it's quite clear, to a newbie it's still very complicated! managed to get through it though and in hindsight that thread is pure awesomeness.
managed to get cm9 working now so will spend some time messing around with it.
thank you for all of your help.
ps. yes i began using gingerbread (stock) but i didn't have a ROM to hand and I wasn't sure if I can just download and install any rom (stock or not) willy nilly without having to do several different things to my phone so i just tried to get cm9 sorted. hopefully won't have to update rom now for some time.
thanks again!!
I'm sure many have already seen or used this if you were looking for a new battery icon on your custom rom. This is an Aroma Installer that currently has 9 differnet battery icons that you can choose from. When running through the installer you will be able to see what the icon looks like in the upper left corner. I will also get them posted here so you will have an idea before you even flash it. Anyone is more than welcome to use this is any way they wish, if you want to include any of these in a rom by all measn go ahead. You dont need to ask me cause I didnt create the icons really, I just modified some and put them all in an easy zip.
Each icon has three folders that will be placed into the SystemUI.apk
-drawable-mdpi
-drawable-sw600dp-mdpi
-drawable-sw720dp-mdpi
This will ensure that no ghost battery icons come up and also has icons for the "Not Charging" when plugged into a computer or low voltage power source.
Currently this zip works only on the Galaxy Note 10.1 series due to I am using /dev/block/mmcblk0p9 to mount system and not busybox. This may change in the future.
GET IT HERE!
Just hit thanks if you use it is all I ask.
Thanks for this your a good guy buddy
thanks for starting a thread to share this pimp.... :good:
I love it!
I love it thanks. I'm using a galaxy note n8010 and it works great, I opted for the spedometer style icon.
Great work!:laugh:
The zip file has to be flashed from the CWM Recovery but how could we change the battery icon?
Thanks.
Tried flashing through CWM three times on a GT-N8013; hangs on every attempt.
Works great on my 8013 using twrp... thanks!
sent from my electronic note pad
drdoombot said:
Tried flashing through CWM three times on a GT-N8013; hangs on every attempt.
Click to expand...
Click to collapse
I had the same problem. Then I flashed it with mobile odin and it worked! I hink it's the CWM you/we are using, it worked before when I had Zedomax's CWM, but with Pimpnation CWM it does not. Not sure why though!
pimpmaneaton said:
I'm sure many have already seen or used this if you were looking for a new battery icon on your custom rom. This is an Aroma Installer that currently has 9 differnet battery icons that you can choose from. When running through the installer you will be able to see what the icon looks like in the upper left corner. I will also get them posted here so you will have an idea before you even flash it. Anyone is more than welcome to use this is any way they wish, if you want to include any of these in a rom by all measn go ahead. You dont need to ask me cause I didnt create the icons really, I just modified some and put them all in an easy zip.
Click to expand...
Click to collapse
i flashed this into the revolution hd 7.0 rom and it was working fine until i reset the battery stat on cwm and now it stays on 100 even though the actual battery level in 97. is there something i did wrong?