Dear Masters!
I would like to ask for help. I've got a HP IPAQ 314-316 navigation system, it does not, it does not take up the charge, only one can enter into Engineering Mode. The computer does not recognize, so I can not even run the official ROM Update.
My question and my request would be that someone could not felrakni SD card ROM update for some solution to at least the USB connection meglegyen.
The Engineering Mode Nboot is possible to update, which should Nboot.bin
Engineering Mode is the option to update Eboot, which should Eboot.nb0
Perhaps if we had these two, you can identify the computer and I could put back the original state.
Thank you in advance for your help
Related
Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!
I Have the same problem
My sad story is…..
I purchased MDA Compact II a month ago. I changed its ROM with JAMin’s ROM (after unlocking with LOKIWIZ). The device was OK but camera was not working, so I updated it again with K JAM’s ROM process started 10% to100% as usual & massage appeared congratulation your device is updated successfully. The process was also running on my device as usual. But after that my device (I mean MDA Compact II) refused to start normally it just blinks LED & so LCD. (It is dead now) The PC doesn’t detect it no boot loader is available to update it with its original ROM that I got now. So if you find any thing plz help me & if I get any thing I promise I'll inform you my email adres is [email protected] plz mail me to have your email adress to comunicate
bye
azhar
Re: I Have the same problem
azhar63 said:
I changed its ROM with JAMin’s ROM
Click to expand...
Click to collapse
Why? :?
jun36 said:
Hello,
can everbody help me my Pda Compact 2 fails after softupdate with
wrong Update (qtec)
Now after start the device, the display is flashing short and than nothing !!
with plug in AC-Power I come in Bootloadermode(without usb or seriell shown) but with usb cable nothing.
The bootmenu does not work !!! What can i do ??? (before flashing bootmenu ok)
are there tools for flashing rom directly or a other way to come in bootmenu ???
without bootmenu i can not boot from SD or ???
please help !!
sorry my bad english !!!
thanks !!
Click to expand...
Click to collapse
if you say you can get into the bootloader with the AC cable then you should beable to download a SD card image on to the phone.
When plugged in it is not bootloader. Same thing happened to me and i tried the sd image rom. The screen looks like the bootloader but it is not. There are 3 colors and no mention of serial 1.x or whatever it is. I am going to send my unit in 4 repair. Look in the prophet forums there are 2 threads. One is titled upgraded prophet with wizard rom and the other thread is Can anyone help fix my brick. If anyone knows a fix it would be great but I think it has to be repaired by disributor.
Try this
Plz try this link u may fine something http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard
Hi All
I have received a Mini O2 XDA for language change from German to English. Going through the Forums I finally got downloded English Rom.After updating the Phone started to vibrate continously.Now the phone refuses to switch on.When I connect the USB cable ,only red light is seen on the earphone part. I cannot flash also with any other version as the USB does not detects the Phone.
Pls somebody give me a detailed explanation on how to revive the Phone.
Best Regards
Supremegsm
Try to get it into Bootloader: press power & camera & softreset all together & wait till the screen reads 'serial v1.xx'. No backlight so hard to read. If this works, connect usb & flash again with an exe file.
Doesn't sound any good that red led, did you charge it fully?
M
Thank you for your early reply.
I can now get into Boot mode and can read USB V1.02.But sir can you pls tell me where can I download the compatible ROM version .
Battery is fully Charged.
http://www.t-mobile.nl/zakelijk/htdocs/page/service/mda_compact_upgrade.asp
or visit the wiki, link on top of the page, & go to the magician section.
Succes, M
Ok.will try and post results here.
Thks & Rgds
No prob, no fun at all killing your device. Or worse from a bloke who's much taller.
Thank you very much for your solution.Now I can switch on the phone and everything seems to be working perfect. Only one thing when that I have loaded phone rom with i-mate.IS there a way I can load O2 Rom or pls give link where I can download O2 XDA II mini ROM.
Thanks & Rgds
Supremegsm
Take a look overhere ftp://xda:[email protected]/Magician/Extended_Roms/ it contains several O2 branding ext-roms in different languages. Just put the desired cab-files on your storage card & execute them to install. Might be that you want to hard-reset first & skip the I-mate ext-rom from executing by a soft-reset just after the initialization ended (press screen to begin using your device).
Cheers, M
I've made these operations on my G4 prophet:
after to have CID unlocked the phone, I've tried to install an official italian ROM (a very good choice ), but I've trusted the man that sold me the phone.
Now powering on the phone normally, it shows the splash screen (HTC innovation) and after it power off
if start in bootloader mode (CAMERA + POWER) it shows the three colour display and IPL and SPL version (both 2.18.0001 )and after about 1 second, before to show USB enabling, it power off;
if I try an hard reset (CAMERA + COMM + POWER) it has same behaviour like in bootloader mode;
if I connect USB cable, it resets continuosly ...
Can somebody help me?
how are you cid unlocked? with a buyed tool? or some free issue?
I've cid unlocked the phone with an IMEI based paid tool
Anything to suggest? Thank you.
I don't know if I can resume my prophet so ...
do you have a sd image rom backup (complete of IPL and SPL) for G4 model or do you know where to download it ?
Thank you very much.
have you,charged the phone 100%?I mean with the normal charger,not usb.... Also download this http://forum.xda-developers.com/attachment.php?attachmentid=41869&d=1182254462
(a collection of G4 IPLs,and try to flash 2.20.0001)
Hi tonydeli7,
first thing, thank you for your help,
I will try this evening the suggested solution, but the problem is that I can't access the phone via usb.
I've erroneously upgraded the prophet (the upgrade process terminated with success) with a k-jam rom without backup before the running rom image on SD.
I'll let you know.
Nothing to do, Ihave full charged the battery phone but I 'm not able to access it via USB so that I cannot execute any upgrade by this way. Nobody has a G4 backup available on SD to try the restore?
Thank you.
I've read better the Jesterz topic about Gold Card project and I've found this other one http://forum.xda-developers.com/showthread.php?t=292667
that seems to be same problem of my phone. I'll let you know.
Thanks.
My phone is working again . Thanks.
T-mobile MDA compact 2.
Tried to flash to WM6. Unfortunately used wrong rom. ( I was naive about the process then !)
When trying to start the unit intermittent faint flashes on screen while trying to reboot itself. It contines this way until the battery dies.
Activesync Cant Detect The Unit anymore
How can i recover and get WM5 back on this unit. ?
How do you get into boot loader mode on this device ?
Can Somebody help me by giving step by step instructions on recovery.
All Help will be greatly appreciated...
Thanks
Aheron147..
hello friends,
any body please help me i got one htc S710 in dead condotion the pcb inside is in good condition so it could be software probleb. i am not able to flash the phone. how to flash please help me
kripalu said:
hello friends,
any body please help me i got one htc S710 in dead condotion the pcb inside is in good condition so it could be software probleb. i am not able to flash the phone. how to flash please help me
Click to expand...
Click to collapse
1)press and hold the camera button and insert the usb cable
2)Flash the rom you had first
thanks a lot sir my phone is connected to active sync from your guide now i will hopfully flash the phone thanks
sir as per your guidence i trye to flash the vox but it stoped by givving error no (270) what should i do.
i think it is stopping due to my device is not unlocked
please sugest me
you said yu connected to active sync?
that means your phone is working and to flash a new rom you have to flash the uspl first..check the 1st thread on the vox section
sorry sir it is not connected to active sync but while pressing camera button i inserted the usb cable in phone phone comes in four color screen and i tried to flash the phone with your 6.5 rom it sdays error [ 270]
please help me
application unlock and uspl how is possible in dead phone
sir please help me it is giving error after 3% what should i do
There is a recent other thread dealing with a V1415 ROM also stuck in bootloader. Your choices are:
1.) (preferred): load a standard ROM for your device if you can get one and restart the flashing procedure with custom rom after the orginal ROM boots again. For an original S710 you can get it at HTC.
2.) (if you have no original ROM and cannot get one for your device): See the V1415 thread and the tips for Gold Card creation using QMAT.
tobbbie said:
There is a recent other thread dealing with a V1415 ROM also stuck in bootloader. Your choices are:
1.) (preferred): load a standard ROM for your device if you can get one and restart the flashing procedure with custom rom after the orginal ROM boots again. For an original S710 you can get it at HTC.
2.) (if you have no original ROM and cannot get one for your device): See the V1415 thread and the tips for Gold Card creation using QMAT.
Click to expand...
Click to collapse
Typing (Not Speaking - Joke) from personal experience... your best bet is to create the gold card with a sd card that's no more than 1gb. you can use the instructions from http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
once you got all the steps down, you will be able to flash the phone with any vox rom, but my recommendation is the clean custom rom from http://forum.xda-developers.com/showthread.php?t=414416 thanks to fireburned!
lots of credit to everyone that assisted me... dsixda,hikkey, hastowent, tobbie... much respect!
You can use any non(!)-SDHC card. You can hardly get small cards nowadays, so a 2GB is the best for later re-use (depite I dont have that problem I bought one just to see if it works - and it does!). Funny thing is that the sector that the Gold Card Key is written to is not used by the FAT (or data), so you can use even a full card and writing the sector to it with QMAP will not spoil the content of the card - so no need to buy one, just lend it if you find someone that trusts you (make a backup copy of the SD content before nevertheless).
thank you chardc but i have serch all the paze for making gold card but i am not able to find mtty and qmat is also trial version please help me
AT FINALLY I GOT OFFICIAL ROM OF VOX but phone is not getting on after 100% flash what could be the problem any body please help me out
okay try this
if ur phone totally dead so first make back working conditions first download vox orignial wm6 roms this roms are in exe files these rom install automatic in ur phone no process need for this roms first ur battery should fully charged then connect ur phone with ur pc for direct bootloader try this method Bootloader
Power off device
Press and hold the camera button
Attach USB to computer and smartphone
Done.
(Works with all HTC Smartphones)
after this method ur phone screen go blank know click on wm6 rom exe file this rom start automatic install in ur phone after install ur pone come back in working condition with wm6 roms this only method that ur phone come back alive