Recalibrate the screen - Touch Cruise Android Development

Hi,
How can I recalibrate the sceen on Android Froyo (latest release) ?
My HTC Touch Cruise LCD screen is a bit damaged on the bottom... I can't type some letters...
I am looking forward to buy a new LCD screen (on ebay), but first, I would like to recalibrate the sceen to be able to test Android.
It was possible on WM6.5 after hard reset but I don't know how to calibrate the screen with Android.
Thanks.

scooter's froyo has calibrate screen app

I found it on Froyo but unfortunately it looks like an hardware problem.
How can I be sure that changing the LCD screen will solve this problem?

if it works in wm then you can be sure its an android problem that we've never heard of. Odds are it is in fact a hardware issue.

aceoyame said:
if it works in wm then you can be sure its an android problem that we've never heard of. Odds are it is in fact a hardware issue.
Click to expand...
Click to collapse
It doesn't work in WM6.5 as well. I'm 99% that it is hardware problem.
Please find enclosed a diagram showing the result of calibration.
I would like to be sure that if I change the Touch Screen the problem won't appears again...

Related

Touch Screen Stops Responding - All Else Works

Anyone else who owns a Touch Cruise have their touch screen just stop functioning altogether? I came back to use my phone which was just sitting in the car and the touch screen no longer works...Obviously this did not happen due to being dropped, though it was a little warm nothing unusual by any standard.
All the hardware keys work, everything else...just the touch screen is dead. Has anyone else had this happen and if so were there any steps to reviving the screen or was replacing it an option, if so what did you do?
Free Man said:
Anyone else who owns a Touch Cruise have their touch screen just stop functioning altogether? I came back to use my phone which was just sitting in the car and the touch screen no longer works...Obviously this did not happen due to being dropped, though it was a little warm nothing unusual by any standard.
All the hardware keys work, everything else...just the touch screen is dead. Has anyone else had this happen and if so were there any steps to reviving the screen or was replacing it an option, if so what did you do?
Click to expand...
Click to collapse
I had this problem with mine, it was just to send it to their lovely repair center through the dealership since I still got my Warranty, they exchanged the front panel, witch senses the touching. Depending on where in the world you live you should be able to by a separate one, or get it repaired by them. I hope it solves for you...
Thanks, I am well out of the 1 year warrant and in the US, which is not even where this phone was originally warranted so there is no chance of that.
I believe the cost of repair outside of warranty, and the time it would take that I would be out of my phone would not be worth it. I am hoping that I could purchase a replacement screen and repair it myself...Anyone have any direction here to do so?
Let me clarify something in regards to the malfunction. The screen itself is still visible and I can see everything as I would normally on a fully functioning lcd screen...The screen simply does not respond to any touch!
Touch Screen stop
hi i install the wwe-hero-3g and it stop it say"Tap the screento setup the windows" my phone is a at&t 8525 so what can i do.
i have the exact same problem. makes the phone useless
Hi try getting into the screen set up, ie where you tap the screen on first boot. You can use the program "mymobiler" to operate the screen through the computer.
Hope this helps!!
Same ****..
Have the same silly situation. Can´t even install the above program as it is impossible to respond "yes" to question about installing.
Have just ordered a replacement digitizer from this source:
http://www.chinaontrade.com/advanced_search_result.php?keywords=htc+digitizer&categories_id=
Don´t know if I will be able to fix it and I have also ordered a new Iphone as
I´m getting tired of all the problems with my loved Touch Cruise.

[Q] Backlight Goes Away..!

hi..
i've touch pro.
today.suddenly backlight goes away..
PPC keep working.. but it's hard to see the Screen..
i've hard reset..
flash an other ROM
but none of them works..!!
any help!?
I think I'm having the same problem as you.
Everything ok but the screen is dark but still working?
I've tried the same as you and also took the phone apart and reseated all connectors and still have the problem.
It seems similar to the Diamond issue but the solution hasnt helped.
If you fix it please let me know
if your back light wont come on, its most probably that your ribbon has broken somewhere
Same here..
I've got this problem too.
Sometimes the backlight is ok, for like half a second.
I'm gonna disassemble my Touch Pro tonight, hopefully I'll find something what will fix this problem.
I got this Touch Pro for like one month now, and I dropped it once.
I have no idea how I got this problem(I guess because I dropped it..)
i had this happen to me before. i would go to power options and move the slider of the brightness and it will correct itself, after a while it is not happening anymore.
I had Toshiba G900, and currently has Qtek S200 and this horrible TouchPro. Only one month old TouchPro changed completely my opinion about HTC. Backlight does not work properly and it goes away completely. I change from official WM6.1 to Energy WM6.5, but problem still not resolved.

About backlight issue in MIUI..Fixed in my phone

My phone LCD was broken few month ago,but before that I got flashed MIUI and CM7 ,that time I was facing backlight problem...tried install every version of MIUI but the backlight issue is still there...the backlight killer app can fix the backlight but I causes huge battery drain because the app is running something to kill the backlight process in background.
But,yesterday i brought my phone to repair..the LCD need to replace with a new set..and it is quite costly..
Today I took back my phone,I try my luck to install MIUI V9 and see whether the backlight issue is still there..and surprising, the backlight issue is gone totally,without using the backlight killer app..and without changing any setting..
I am so happy with that ..even the LCD cost me a lot
*so in short,
before LCD broken --AOSP Rom--Backlight problem there
after LCD broken --AOSP Rom--Backlight problem also there
After LCD replacement--MIUI--backlight problem gone..
will test other AOSP if got time..
so how to explain about this problem.
This is the picture of my broken LCD...I take it back from the shop..
This supports my theory: http://forum.xda-developers.com/showpost.php?p=23232046&postcount=42
See this: http://forum.xda-developers.com/showthread.php?t=1531928
loSconosciuto said:
This supports my theory: http://forum.xda-developers.com/showpost.php?p=23232046&postcount=42
See this: http://forum.xda-developers.com/showthread.php?t=1531928
Click to expand...
Click to collapse
I get this in my Kmsg which is taken just now..
[LCD] nt35510_ldi_poweron_sony()
This is only a part of my Kmsg,there are so many lines,so i take important one only..
Thanks. That means I was wrong, but it's obviously something hardware related.
(I have "nt35510_ldi_poweron_hitachi()" in my logs)
so that means LCD brand doesnt cause any effect to the blacklight.....
another hope went in vain...

Xperia Z3-Black backlight only,no image.

Hello. I got this Z3 with a broken screen, when I got it it had only black backlight, no image, but the LCD cable on the bottom was cut, so I thought that was why it had no image.
So I replaced the screen with a new one, but the issue remains, no image, only black backlight.
Tried restoring the software with Sony PC companion, updated to latest version, but it didn't help.
The phone boots fine, touch works, I can select options and sometimes I even get audio readouts of what is on the screen, just no image.
Is this a dead motherboard or something else? Because I went through a couple of new screens, none worked, so I'm out of the ideas.
I haven't encountered a case like this before, the screen either works or doesn't, the fact that the touch works and I have backlight puzzles me. No backlight or no touch issues are a common case to me, but this is a new one.
Can someone help here?
Thnx
Same problem....
Hi all.I have the same problem and tried few screens with no luck.If I get z3 compact on hd tv via hdmi cable I can see that it works but no image on lcd only backlight and touch works.Did you find out what causes this problem?
egres said:
Hi all.I have the same problem and tried few screens with no luck.If I get z3 compact on hd tv via hdmi cable I can see that it works but no image on lcd only backlight and touch works.Did you find out what causes this problem?
Click to expand...
Click to collapse
It's a faulty LCD connector on the motherboard, in my case. Not the connector itself but the small jumper just above it, it gives power to the LCD, it was broken off.
I had it resoldered. Works fine now.
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
egres said:
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
Click to expand...
Click to collapse
No image at all, only black backlight ant the touch was responding.
The three square fuses on the bootom of the picture, it's similar in Z3, in my phone one of those was broken off.
Hi guys. I have almost the same problem but inverted. My display and touch is working but i dont have backlight. I can see the screen only if i put light on it.
Maybe u guys have a faulty digitizer responsible for image faulty(no image), better for send repair, flashing new stock firmware will not help
I tried with new digitizer, no luck. Tried jumping the fuse with no luck. Don't know what to try anymore.
GreatVortex said:
I tried with new digitizer, no luck. Tried jumping the fuse with no luck. Don't know what to try anymore.
Click to expand...
Click to collapse
egres said:
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
Click to expand...
Click to collapse
Put the motherboard in the oven and bake it for a few minutes, it resold everything, if that's the problem, it will fix it.
For more infos and temperature / time, google it
Same problem here! i have tried new lcd, new flex cable. nathing works, lcd backlight turn on but no image, touch work cause i feel vibration while touching the lcd.
Pleas Helpppp Anyone with the genius mind??????
I'm facing the same problem with my Z3C, a friend of mine told me he applied this method on his phone and it worked but i'm not sure how to do it.
http://www.mobilerdx.com/2015/03/sony-xperia-z3-display-lighting-problem-repair-solution.html
z3 no display but backlight on
by jumperig the fuse near lcd conector it turns on the backlight .There is another fuse surrounding power manager ic which may got open & display ic is not powering.

Question SOLVED: Touch function of screen sometimes not working

HI
I'm having an issue, where the touch function of the screen sometimes becomes non responsive, and reboot by holding both sidekeys is the only solution. Swithing between tiles by rotating the bezel works, only the touch function is "gone". Resetting the watch doesn't fix it.
I'm running the latest software version (R895FXXU1FVD4), my strap is as tight as can be and I clean the back of the watch every day. I'm running with screen sensitivity set On, as I have a Panzerglass on the screen.
I'm kind of hoping, that I'm not the only one, having this issue, and that someone has a valid solution.
Thanks in advance
TorbenKB said:
HI
I'm having an issue, where the touch function of the screen sometimes becomes non responsive, and reboot by holding both sidekeys is the only solution. Swithing between tiles by rotating the bezel works, only the touch function is "gone". Resetting the watch doesn't fix it.
I'm running the latest software version (R895FXXU1FVD4), my strap is as tight as can be and I clean the back of the watch every day. I'm running with screen sensitivity set On, as I have a Panzerglass on the screen.
I'm kind of hoping, that I'm not the only one, having this issue, and that someone has a valid solution.
Thanks in advance
Click to expand...
Click to collapse
i myself dont or havent experienced loss of touch but touch sensitivity with a screan protector on, maybe causing the issue, try keeping touch sensitivity off
gav83collins said:
i myself dont or havent experienced loss of touch but touch sensitivity with a screan protector on, maybe causing the issue, try keeping touch sensitivity off
Click to expand...
Click to collapse
Thank you for your input.
I've been using PanzerGlass since Day 1. This is a recent problem. I was hoping it was a software related one, but I'm not so sure anymore. 🥹
TorbenKB said:
Thank you for your input.
I've been using PanzerGlass since Day 1. This is a recent problem. I was hoping it was a software related one, but I'm not so sure anymore. 🥹
Click to expand...
Click to collapse
do you have moisture under the glass maybe ?
No. Everything looks and feels perfect.
On my watch4classic 46mm
I have the exact same issue from previous firmware update and to get it to responding I have to let watch go to aod mode and then wake watch again
The updates of this new wear os 3 are really messed up and have ruined experience of this watch
Latest software upgrade seems to have solved the problem.
Thanks for your replies and suggestions.

Categories

Resources