{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a port of One Click Lag Fix to the Galaxy 3 (i5800) :
You should do a factory reset before launching that fix (Recovery). IT WILL ERASE ALL YOUR DATA ! MAKE A BACKUP !
Your phone needs to be put in "USB Debug Mode"
Don't use this if you don't know how to flash your phone.
This is ALPHA software, you may have to reflash your rom if something goes wrong. You have been warned.
To install, just launch "lagfixme.bat" (or do it manually if you are a linux user like me).
You will get a 500-550 score at Quadrent, and the phone should be more responsive, but it won't turn your phone into a Galaxy S (don't dream too much).
You will only get 150mb (for now, you can try to change it for 160-170mb, but it might mean problems) for data .
I've only tried it on I5800XXJPA. I think it doesn't work on 2.1 firmwares, since i think they lack ext2 support.
I'm not responsible for anything that might happen to you after using this.
How to use it:
Root your phone (Using SuperOneClick for example)
Install busybox 1.17 from "stericson.busybox.apk"
Put your phone in USB debug mode
Launch "lagfixme.bat".
If i were you i will reboot.
Please give feedback
Gsam101 said:
This is a port of One Click Lag Fix to the Galaxy 3 (i5800) :
You should do a factory reset before launching that fix (Recovery). IT WILL ERASE ALL YOUR DATA ! MAKE A BACKUP !
Your phone needs to be put in "USB Debug Mode"
Don't use this if you don't know how to flash your phone.
This is ALPHA software, you may have to reflash your rom if something goes wrong. You have been warned.
To install, just launch "lagfixme.bat" (or do it manually if you are a linux user like me).
You will get a 500-550 score at Quadrent, and the phone should be more responsive, but it won't turn your phone into a Galaxy S (don't dream too much).
You will only get 150mb (for now, you can try to change it for 160-170mb, but it might mean problems) for data .
I've only tried it on I5800XXJPA. I think it doesn't work on 2.1 firmwares, since i think they lack ext2 support.
I'm not responsible for anything that might happen to you after using this.
How to use it:
Root your phone (Using SuperOneClick for example)
Install busybox 1.17 from "stericson.busybox.apk"
Put your phone in USB debug mode
Launch "lagfixme.bat".
If i were you i will reboot.
Please give feedback
Click to expand...
Click to collapse
So this will basically leave me with only 40 MB free space on the phone? Or will my data now be stored inside this 150 MB file?
The applications/dalvik-cache/data will be stored in the 150mb file
Gsam101 said:
The applications/dalvik-cache/data will be stored in the 150mb file
Click to expand...
Click to collapse
So only 40 MB left for my installations??
addicted2088 said:
So only 40 MB left for my installations??
Click to expand...
Click to collapse
No, because your apps are stored in /data/app (and /data/data and /data/system and /data/dalvik-cache), which means that all your apps will be on the 150mb file .
Gsam101 said:
No, because your apps are stored in /data/app (and /data/data and /data/system and /data/dalvik-cache), which means that all your apps will be on the 150mb file .
Click to expand...
Click to collapse
Well then, I'll give it a try and give feedback if possible.....
Good thing that someone has started playing around with the Galaxy 3..
Keep it up..
Hello, I tested this lagfix and he woorks correctly, but i have a small problem.
When I launch the music player a message appeared in the notifications saying free up space... I have nothing installed apps and i have reset to zero after and before the lagfix ...
Otherwise it's a good works!
Sorry for my bad english I'm a french ^^
You reset after the lagfix ? What do you mean (using recovery ? ) ? In what version your phone is into ?
I'm french too
I have reset to zero before have installed the busybox and apply the lagfix and after reboot the phone too.I have acces rooted and the lagfix works correctly.
But I have problemes with the sd card/ market. I am in froyo version JPA
I' have used your méthode. no for recovery mode.
jordane1993 said:
I have reset to zero before have installed the busybox and apply the lagfix and after reboot the phone too.I have acces rooted and the lagfix works correctly.
But I have problemes with the sd card/ market. I am in froyo version JPA
I' have used your méthode. no for recovery mode.
Click to expand...
Click to collapse
What way did you use to reset the phone the second time ? (I mean, after doing the lagfix). You should not reset the phone after the lagfix (In fact, the lagfix did it itself).
I have used in the settings to restore the original settings.
But i just installed again and the probléme for music player is resolved. but no market i have a message saying who not have any space in the phone. So i supposed who the last space is reserving at the sms and cie. Because before the lagfix i have a similar message saying looks like at 40 mb remaining.
I supposed who this is due at the small space free. But is not very important for me because I used always music player and message.
Finally after 2 reboot always works correctly.
The market too. but I don't make a reset to zero.
Sorry fort my bad level in android ^^"
Good works =) And they apps move to ine the 150 mb space ?
Well, my phone crashed one time while a Titanium Backup restore, then worked perfectly, so i think it's the same problem.
In fact, (almost) everything from /data goes into the 150mb file. It could be larger, but you will have the boring "No space left" message which i hate (i'm looking for a workaround).
Is this gonna have any effect on my applications speed? Or only the phone is gonna be more responsive?
addicted2088 said:
Is this gonna have any effect on my applications speed? Or only the phone is gonna be more responsive?
Click to expand...
Click to collapse
I think so.
Gsam101 said:
I think so.
Click to expand...
Click to collapse
Well, I'll try it and see.. Been putting it off till now, but I think I'll give it a try..
hi it work's... thanks i get 530 in quadrant...
after install lag fix, i can delete the files created in SD card?
sorry for my english
Yes you can delete the files in /sdcard .
Gsam101 said:
This is a port of One Click Lag Fix to the Galaxy 3 (i5800) :
You should do a factory reset before launching that fix (Recovery). IT WILL ERASE ALL YOUR DATA ! MAKE A BACKUP !
Your phone needs to be put in "USB Debug Mode"
Don't use this if you don't know how to flash your phone.
This is ALPHA software, you may have to reflash your rom if something goes wrong. You have been warned.
To install, just launch "lagfixme.bat" (or do it manually if you are a linux user like me).
You will get a 500-550 score at Quadrent, and the phone should be more responsive, but it won't turn your phone into a Galaxy S (don't dream too much).
You will only get 150mb (for now, you can try to change it for 160-170mb, but it might mean problems) for data .
I've only tried it on I5800XXJPA. I think it doesn't work on 2.1 firmwares, since i think they lack ext2 support.
I'm not responsible for anything that might happen to you after using this.
How to use it:
Root your phone (Using SuperOneClick for example)
Install busybox 1.17 from "stericson.busybox.apk"
Put your phone in USB debug mode
Launch "lagfixme.bat".
If i were you i will reboot.
Please give feedback
Click to expand...
Click to collapse
will this fix proximity censor
how is the gaming performance after this fix? did anyone try nenamark1? can somebody run nenamark1 and post the fps?
finally will it work on i5801?
Related
Any help or guidance is greatly appreciated here.
I was helping my friend with his XT720, we first rooted it with Universal Androot, then, tried to partition the SD card with GParted. I thought I had it correct (the first partition was 6.5Gb and FAT32, the second was about 1000mb EXT2, and the third was 128mb linux-swap partition). We then attempted the optimizer script and had nothing but issues. Every time I tried the apps2sd it would give an error, something about the partition extension. So we tried slightly different partition layouts and everytime no luck. Apps2sd still failed every attempt, so we gave it one last try at this and we managed to get Busybox to install, cache-sd, optimized build.prop, (apps2sd still failed) but then when I went to install JIT for Froyo, the phone screen went black..we let is sit for a while and nothing. So we pulled the battery waited a few minutes and put it back in, it went to the all black screen with the Moto symbol.
Thats where we left off. I'm kinda shocked at how any of these steps could have lead to a bricked device and hoping someone can point me in the right direction as to how fix this.
Since I never installed rom manager (is it even compatible with the XT?) I cant just restore from nandroid. Is there a way to get this to factory restore or push a recovery image from adb? I heard RSD lite might be able to help me, but I'm not too familiar with it at all (yet).
Any help or guidance will be greatly appreciated! Thanks in advance.
flash back to stock rom using rsdlite. theres instructions somewhere on this forum
Search for recovery mode. Something like you have to hold in the volume up & the camera mode button while powering up. Clear the data & cache (possibly a few times) & then reboot. If that doesn't work the RSD lite should.
HTH
Thanks for the help guys. So from what it sounds like, it is in fact not a brick and very fixable?
Ill be attempting this shortly.
Sent from my HTC Glacier using XDA App
Also, any advice on how how to partition the SD card for apps2sd?
Sent from my HTC Glacier using XDA App
civicvx94 said:
Also, any advice on how how to partition the SD card for apps2sd?
Click to expand...
Click to collapse
If you have a Linux box around, it provides the best solution. I booted into my Linux partition, put my SD card into the reader slot, and fired ''gparted''. First I shrunk the existing fat32 partition which was occupying whole 8G to 7. So no data is lost. Then create another primary partition of size 1G (whatever left) to ext2 (and format it). No swap needed. Works like a charm, done in 5 minutes, no data backup/restore necessary (though advised).
If you are on a windows machine, you can use MiniTool Partition Manager Home Edition. All partitions have to made "Primary" and the fat32 one to be "Primary" and "Active".
The partitions made by this tool were recognised by both apps2sd and app2card(didn't have to repartition) apps...
Well I successfully restored the device with rsd
I don't have Linux, however I do Gparted live on a CD that I can boot from, so I got that part covered.
Ill attempt the different partition layout mentioned and see if I have better results.
Do I enable Apps2sd with the optimizer script again or is there another method? I'm just hesitant to use it again since I had to restore after last time..
Sent from my HTC Glacier using XDA App
The script is what I used. I've seem some talk of an app called something like "app2card" (not on the market). There is an similar script on the driodformums.net website. It has a customized script for the CBW SBF. That's the one I ended up using, when I tried the version on this forum it kept errroring out at some point. They both do similar hacks (from my limited understanding) so I'm not sure what the problem was.
civicvx94 said:
Ill attempt the different partition layout mentioned and see if I have better results.
Do I enable Apps2sd with the optimizer script again or is there another method?
Click to expand...
Click to collapse
Just ensure that your partition matches the script's assumption. Like the script assumes /system is mounted from /dev/block/blahblah06, the ext2 partition of the SD card is /dev/block/mmcxxp02 ... if yours are different (mine was), edit install.sh accordingly before running it.
I'm having almost the same issue. I feel stupid. Tired after work. Blah!
I tried a similar app and transfered all my apps to the sd card. Partitions are fine.
For some reason my apps were not working though, and I tried some "fix" that started fixing working system apps on my internal memory. Now I only get it to boot the motorla logo.
I got into the repair options and cleared cache but same thing.
My wife has a nexus, I'm wondering if I can swap out the sd card or something. Checking out this thread. I have RSDLite. But I never flashed the rom or anything that I know of. Just rooted.
Time to read more!!!
civicvx94 said:
Well I successfully restored the device with rsd
I don't have Linux, however I do Gparted live on a CD that I can boot from, so I got that part covered.
Ill attempt the different partition layout mentioned and see if I have better results.
Do I enable Apps2sd with the optimizer script again or is there another method? I'm just hesitant to use it again since I had to restore after last time..
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Could you please explain how you restored with RSD? I think something is still on my SDcard or I trashed an app / resource it was trying to fix (App2card)
Phone just stops at motorola logo even after clearing cache / doing reset (holding button combo)
Thank you!
Could you please explain how you restored with RSD?
Click to expand...
Click to collapse
First you have to download & install the USB drivers from Motorola & the original SBF (needs to extracted) from HERE, then power your phone into bootloader mode (I think it was hoding in the volume down & shutter button while turning on the phone). Now when you run RSD you should see your phone in the device list browse to your SBF & start the process. It takes about 10 minutes but when your done your phone should be in a "fresh out of the box" condition. Also I should note that I couldn't get RSD to see my phone on my Win7 64 laptop but it worked fine on my XP machine.
HTH
This is bricked???
guys my phone suddenly stard like this....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
do you think is bricked???
any idea how to fix it???
it just happen when i plug in the battery.... without any combination bottom... on the phone....n my RSD Lite 4.9 did not detect my phone....please guys...help me....
[Q] need help my xt720 briced
guys my phone suddenly stard like this....
any idea how to fix it???
it just happen when i plug in the battery.... without any pushing combination bottom... on the phone....n my RSD Lite 4.9 did not detect my phone....please guys...help me....
Cool, my phone is seen.
Is there a way to save everything? I don't feel comfortable flashing with something from online.
I'm going to see if I can fix it. I tried to "repair/re-install" a system app / resource .apk
I'd like to try and fix it before I flash. I hope even though my phone is not booting past the logo, that I can "save" itin it's current state.
Thank you!!!
reboot it into download mode
hold in the volume up & the camera mode button while powering up
then the RSD will detect it
I had try to reboot n get inro the flash mode but my computer still not detec even i had up grade my driver... (
Sent from my Milestone XT720 using XDA App
What operating system are you using?
Cbw sbf...
Sent from my Milestone XT720 using XDA App
Not-so-Super Froyo was my best rom build but too much crashes and app forecloses inched me closer to bringing back Windows Mobile. After a while of experimentations I think I found my best combo ever ---- l1q1d's 2.6.25 kernel and casacristo Valentine ROM. Thanks!!!
My screenshots. Not the default appearance though.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's my setup for NAND Installation: (Download all 4 files)
a. casacristo's VALENTINE ROM build (extract androidinstall.tar from the downloaded file using winrar or any rar decompression program)
http://www.ziddu.com/download/13802744/androidinstall.rar.html
b. l1q1d's 2.6.25 kernel POLAIMG.NBH
c. install-seq.sh
d. You might need to flash the kernel with this file CustomRUU.exe
(See Attached file for download links below)
IMPORTANT REMINDERS:
The NAND installation doesn't work in automated mode. You have to enter the
Android BOOT Menu mode and install from there. Resetting the phone also will not work. You have to enter the Boot Menu and press Exit. OR you can rename the file install-seq.sh to anything so reboot works automatically.
Try these STEPS for installing Android on your Polaris NAND:
IF YOU ARE NEW TO MODDING ANDROID ON YOUR POLARIS I SUGGEST TRYING l1q1d's TUTORIALS FIRST. I suggest you have newer bootloader and radio. Im not responsible for what you do with your phone anyway.
1. Create a folder named Andboot on your SD card and copy the 2 files androidinstall.tar and install-seq.sh inside the folder.
2. Insert your SDCard on your Polaris.
3. Go to Bootloader Mode by pressing RESET once while pressing down the Camera button.
4. Once the 3-color Bootscreen comes out, connect your Polaris to your Computer thru the USB cable and check that the screen says "USB" and not "SERIAL" anymore.
5. Put CustomRUU.exe and POLAIMG.NBH together inside any folder and RUN CustomRUU.exe. Follow the instructions on screen. When the format is over your phone will reset and Android installation begins.
6. HOLD PRESS the Volume UP button until the installation texts roll on the screen and you come into the Android Boot Menu. IF YOU DONT, then RESET the phone and do it again.
7. Choose the menu "Install System" and let Android install for a while.
8. Installation finished. Choose Exit and let Android roll. Congratulations.
WHAT'S WORKING?
I tried the following...
Camera, WIFI, GPS, Bluetooth, Removable Disk Mode in USB works when connecting USB while logging in to Windows, ... Battery is more accurate.
WHAT's NOT WORKING?
VideoCamera... dont ever try it freezes; Install to SD...nope!
WHAT's NEW?
New Market, New Battery Image, No frequent forecloses, lesser resets
WHAT's IN?
Comes installed with GOLauncherEX (I preferred LauncherPro), SwiFTP, APNdroid, and more.
I recommend the following apps (tried and tested):
*Contapps for Contacts (syncs with FB, Twitter to name a few)
*ChompSMS for Messaging
*LauncherPro for Launcher
*Friendcaster for Facebook
*QuickPic for Gallery
*FileExpert for File Navigation
*GPS Essentials
*KS Uninstaller
*Easy Installer
*ClockQ
*Tubemate
I trying it now. I have had problem with installing apps in app store but after phone restart is all ok. I love the speed of this system
Thanks for trying. Thanks by the way to l1q1d for his kernel and Atools and tech. I chose to use his 2.6.25 kernel since that has working camera. You might wanna try with the latest 2.6.32 kernel maybe more results would be favorable. If you can find a better setup pls share also, for now I'd be sticking with this combo. The battery status by the way is accurate and reliable. I got 5% juice and the phone is still working though reminding me to connect to charger. Previously on the Froyo combination the phone is dead at 25%.
Question
Hey guys. First of all thank you for posting this thread, and second, can you please tell me if i can use this build with haret, not nand. I tried to install it but i didnt succed. Can you please help me?
I can't install it too? Everytime i see can't extract the files, after it reboot and hold the vol up bottom?
Hmm sorry my mistake, i forgot to unpack "androidinstall.tar"
I'm gonna comment after use
Seems to work proberly? You say install on nand, but why does it still use the sdcard when reboot?
I have a problem.
After I installed it,I turn off my phone and turn on it again.
I failed to boot the android,it says "Failed to format".
Plz help me!
oh sorry. i know what's wrong now.
Hello again guys. I have managed to install it in haret. I must say its fast but still not so "super" . It doesnt load the market (gives me a server side error), launcher freezes. I will test it some more and get back asap.
LE: Seems to be working. I dont know how, but it is. I am downloading apps as i type. And btw, the battery indicator is much accurate then before. Thank you again.
oscar32170 said:
oh sorry. i know what's wrong now.
Click to expand...
Click to collapse
I got the same problem, can you explain how to fix it. Thx!
Instalation all ok. (is very easy)
Run fast, estable, the camera works (the only in all roms android i used).
The battery spend in a day at least the percentage is correct.
Perfect job.
yokishadow said:
I got the same problem, can you explain how to fix it. Thx!
Click to expand...
Click to collapse
When you boot it,you should hold pressing the volume up button. You'll find that you are in Boot Menu. Press "Quit". Then it'll be fine.
I'm having a load of trouble doing this, probably cause im a noob :[
i followed the instructions but ended up with a white flashing screen and couldn't do anything. I've just installed the original software windows mobile 6.1 and I'll try again. Hope i can get it to work this time!
does androidinstall.tar need to be unpacked, or do i just unpack that file from the rar?
i did the same thing ... i didnt unpacked the archive and it didnt worked. so you should unpack and try again.
same thing has happend again with just the .tar file on there, my phone completes the installation and when it goes to boot up it vibrates twice and flashes on the white screen, any help would be appreciated
The issue lies on the kernel (POLAIMG.NBH). Your Polaris could have a different panel coz there are actually other types. Please read l1q1d's original tutorial on how to use Atools to obtain a kernel suited for that phone. Just try one of the panel type from that tutorial and if it dont work try the other. You can always use the androidinstall.tar file from this post with that kernel.
thanks for your nice work...
camera doesnt work as you said.
wifi doesnt work sometimes, but fine.
and very important for me:
How can i add another languages?
Dutch and Turkish?
Please let me know...
erhangulsum said:
thanks for your nice work...
camera doesnt work as you said.
wifi doesnt work sometimes, but fine.
and very important for me:
How can i add another languages?
Dutch and Turkish?
Please let me know...
Click to expand...
Click to collapse
add also arabic laguage ...
please link download other ziddu.
ziddu troble...( slowwww )
erhangulsum said:
How can i add another languages?
Click to expand...
Click to collapse
try app "MoreLocale 2"
I have problem with headphones. When i connect headphones, sound still played from speaker.
sd to data
is there a possibility to install data to an sd partition?
I tryed to chose Data on SD partition but it has no effect, the apps are still installed to phone memory
Hello,
This ROM is based on Tim6a and www_apad_tv-ibex-Flytouch-3-Firmware-V8.
I started customizing Tim's 6a ROM for my own use, basically since I wanted to see all apps compatible with FT3 on Google Play and I wanted to use ADW Launcher. Now that my customization is complete, I wanted to share it with the xda-developers community
The ROM is built to mimic a Samsung Galaxy GIO device. This device has a much smaller screen but has an ARMv6 processor like the FT3. So all apps downloaded from Google Play should work, and with good performance since it will be the app's QVGA version. Gameloft games also recognize this device, so for example you can download and play Ice Age Village.
Credits go to Tim for his great custom ROM, Apad.tv for firmware-V8, Axlien for the build.prop ideas, chairshot215 for performance tweaks. Thank you guys!
mod edit
I hope you enjoy this release!
Tolga
INSTALLATION:
Unzip the contents of mod edit] to the root folder of your SDcard, and reboot FT3. When the installation is complete, don't forget to take out the SDcard and remove the installation files.
If Wi-fi is grayed out after installation, it means that your wifi card is not 0803 v1. (default) Try enabling old FT3 or 0803 v2 using Tim's scripts in Gscript Lite.
To view all apps on Google Play, follow these steps after installation:
1. Open Google Play, accept the upgrade and accept TOS.
2. Go to Settings>Applications>Manage Applications and select ALL tab.
3. Go to Google Play, clear cache and force stop (DO NOT CLEAR DATA)
4. Go to Google Services framework, clear data and force stop
5. Open Google Play, and you should get a server error. (This is normal)
6. Restart FT3 and all compatible apps should be visible on Google Play!
mod edit
SCREENSHOTS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES:
ADW Launcher (InfoTM Home is also included)
Rooted, superuser
Google Play Store v3.5 (Android Market latest version)
Dolphin Browser, Gmail, Youtube, Terminal Emulator, Root Explorer
Development app for enabling USB debugging
Adobe Flash plug-in 10.1
Tim6a scripts for old FT3 wifi fix, 2MP camera fix etc.
Google Play Store fix and Performance tweaks in build.prop
Minimum apps included for smaller download size and performance
KNOWN ISSUES:
Market fix needs to be applied manually after installation.
TO-DO-LIST:
Custom Kernel to enable HDMI Mirroring and Overclocking (Investigating Stragulus FT Kernel Source atm)
CHANGELOG:
v1.0
Initial Release
Click to expand...
Click to collapse
DISCLAIMER: Please use this mod at your own risk, rooting your device and installing custom ROMs may render your device unusable and VOIDS THE WARRANTY.
I will try to ensure that all info about TolgaMOD_FT3 is up to date here, and will do my best to help in case of problems. It's best to report problems by replying to this thread rather than PM, so that the solution can be viewed by all users.
Hmmm.
I'm useing one of Tim's Roms... not sure wich one. The one where the screen is always dark. I tried dling your fixed stuff put it on my sd card it said it updated took out the sd card than turned it back on, but nothing had changed, everything was still the same? I have tryed the Power button+menu+front button to factory reset it, and still tims rom is still there with no changes. I just am at a loss now... really pissed to be honest. I cant even get the thing back to it's original original settings... I want to use your packet, any suggestions?
Anyone? I have just about tried everything and I'm on my last leg. I'm about ready to just rip the case open and K.O. the battery~
Hi billypaul69,
On my FT3, I just push menu+power to do a factory reset. Perhaps you could try that button combination to do a factory reset.
About flashing my ROM: Apparently the update somehow did not complete for you. I suggest you check out this excellent video tutorial from Axlien to flash a ROM to FT3, and see if it helps: http://www.youtube.com/watch?v=w7xdpnoHLeg
Make sure you don't turn off your device, before you see the following message on the screen:
Updating system firmware completed.
Please shutdown your device and remove the installation card!
Automatic shutdown in 1 minute.
Click to expand...
Click to collapse
If you see any other messages such as "not complete", "wrong system file" etc. and not the one above, please report them here. It's possible that either the .zip file you downloaded got somehow corrupted or the SDcard you are using for the update is faulty. In that case try re-downloading TolgaMOD, or formatting your SDcard and try again.
I hope that my suggestions work for you! Thanks for checking out my ROM!
Regards,
Tolga
Thanks soo much i'm going to try all the steps asap.
\billy
Hi
I just installed your new rom file and everything went Ok. The only problem is that my wifi network is not working. I can activate the wifi but it cannot find any network.
I tried using gscript to install on of the wifi patches but I get the following error message
"stderrermission denide" when I run the script.
Any idea as to why this is happening ? Apart from that, you rom is very snappy in operation.
Hi jammertn,
I'm glad you like the speed of my ROM, that was one of my goals indeed. I'm pretty sure one of the wifi scripts will correct the problem. For example my tablet's wifi works with the "old FT3" fix.
The reason you are getting the "permission denied" error is because gscript was not given superuser permissions.
The first time you run gscript, there should be a pop-up screen from superuser application asking for root rights. You should select "Allow" on this window. If you don't allow it or deny root access, the scripts won't work. If you denied root access and selected "remember" the first time, please launch superuser application from the app drawer and change the status of Gscript Lite to "Allow".
Since you have wifi not grayed out I guess your wifi is 0803 v2. Please try running the "Wifi fix:0803 version2" script and then reboot your tablet.
I hope that helps!
Hi and thanks for the quick reply.
From where do I launch superuser?
Click the middle button (the one with white squares) on the dock, you will have access to all installed apps including superuser.
OK I found the application.
One more question, Something happened and now gscript only sees 3 scripts. How can I make it show all the scripts like before.
Excuse all my dumb questions but I'm new at this.
No problem mate, I think the best way is to simply re-install the ROM You can backup your current apps with Titanium Backup.
Nice, thanks a million
I got it working now.
I'll be watching this thread closely.
Keep up to great work
Yay! I'm glad it worked, c ya around.
Hi Tolga
Is there anyway to activate bluetooth on this tablet? I tried using the gscript but cannnot get is to work. Any ideas ?
Hi jammertn,
This tablet doesn't have a bluetooth chip onboard. Tim's scripts are for driving usb bluetooth dongles. I'm not sure which ones work, but maybe the thread below could have more info.
http://www.apad.tv/apadforum/showthread.php?1358-Flytouch-3-Bluetooth-USB-dongle-testing-thread
Hi Tolga
Thanks for the reply, I have seen that thread but it does not have have any useful info in it. I tried it with an external usb/bluetootyh dongle but still no operation.
Hi,
I ran a quick web search and I haven't seen anyone successfully making a USB bluetooth dongle work on FT3. I think Tim included some kernel modules with the firmware for devs and testing purposes. So please don't assume it will work when you simply plug in any USB BT dongle.
Here's the support thread for Tim6a, there might be more info there:
http://www.apad.tv/apadforum/showthread.php?416-Flytouch-3-Hybrid-ROM-(rooted)&highlight=bluetooth
I think I have a USB BT dongle somewhere, I will take a look if I can find it
Regards,
Tolga
has this been posted on Apad.tv or tested on the iBex Flytouch 3 by people on there?
Do you mean if this ROM has been tested or if USB bluetooth dongle has been tested? I'm pretty sure TolgaMOD runs on Ibex Flytouch 3, since it's basically a modified version of Tim6a.
Here is my ROM's thread on apad.tv:
http://www.apad.tv/apadforum/showthread.php?2675-ROM-06-May-2012-TolgaMOD_FT3_v1.0
i installed rom over Tim 6a rom but still nothing changed,, MENU+power reset also tried.. currently my Huawei data stick does not work since some weeks, thats why i need to install a fresh firmware..
merhaba, yükleme yaptim fakat yine eski tim 6a rom yüklü yani hicbir sey degismedi, hard reset yaptim yine ayni.. ayrica önceden calisan Huawei data stick bi süredir calismiyor, birseyler silinmis olmali diyerek yeni rom yüklemek istiyordum, acaba neden calismiyordur data stick?
I have a Pantech Burst running 4.0.4 rooted. today the wifi cut off and is stuck on "turning on" but never does. I deleted cache from recovery menu, factory reset it, and flashed cwm on it (hoping a new flash would fix it) the only option I have left is flashing a whole new stock rom. is there any other way or something else that could be wrong? maybe wifi chip went out? got water damage last week but I took it apart and blew dry the innards before I used it. any help would be appreciated. If i have time I am going to flash the rom. IDK if I will still be here by time its done downloading though :b
I am trying to use a program called "p9070 download tool" which is supposed to flash it. ive never heard of it before. it flashes it from a .pdl file? well last time it froze so maybe it will work this time. computer is recognizing it. does anyone know of a rom I can flash with odin? thats the way im used to doing it, at least if this doesnt work.
in my opinion you should use pantech burst download tool..
odin is known for samsung phones and trying it on burst may brick your phone..so try to stay away from odin..
For some reason I cannot get it to work. It shows up "S/W upgrade" on my phone then the program freezes. Running win7 64bit. Also I tried turning on power saver and its doing the same type of thing the wifi is. A loading circle as if its turning on forever. Gives me hope that its not a fried wifi chip! Thanks for your reply.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
just so you can see what is going on. for some reason it connected to pantech download tool yesterday but not today. notice it says "no data" for the phones info. it wont let me click download.
well I got it to go with my stepdads usb cord. problem is it bricked my device after failing! my phone is stuck on "s/w upgrading" ive tried booting into recovery, taking the battery out waiting a half hour and putting it back in, putting in fastboot ( said it could not connect to device) nothing is working. i feel screwed now. anyone have any idea how to fix this dang thing!?!? even if it invo;ves taking it apart disconnecting something and putting it back together. if it makes it go away ill do it. thinking about just getting a new phone at this point! maybe a better one. it wasnt bad but ever since the wifi issue it has been getting worse.
-update- got it booted using that program. it has reverted back to 100% stock gingerbread and wifi still isnt working. I am going to assume that the wifi is burnt out or has a corroded connection. can anyone tell me where the wifi chip is on the motherboard? I wanna try to see if i can clean any possible corrosion out of it and try it again
ok! the only option left for you is to flash a rom again using livesuit. find a rom for your phone which can be flashed with livesuit and let it do it's work-done now you can work everything on it again.. the steps for liivesuit can be found by googling it - clean ics rom (droid extra .com) [by the way don't flash that rom only follow the procedures]. try it, if any problem- comment!!!!
I'm pretty sure there's no problem with the chip and it could be a problem with the phone software or the router/network.
But wait water damage? oh well. I guess you can try:
You will LOVE the present cygenmod mod, the new rom:
Download available here:
http://code.google.com/p/devsnest-developments/downloads/list
cm-10-20130529-UNOFFICIAL-presto.zip
Upgrade to 4.0.4 from Pantech first though or else you'll have problems. The new CM rom is awesome, smooth, fast and bug free for all you need. You'll be amazed.
Get help here:
http://forum.xda-developers.com/showthread.php?t=1487576&page=466
Backup your data, whatever you can (cost lists, etc).
Backup what you need into the SD card. Root, install recovery, copy google apps from that same link into SD card and also the rom. Check their hash codes to make sure you have the right files. Boot into recovery, and make sure you can access the two ZIP files in the SD card. Now format /system , /data, format cache and dalvik and then flash the rom and then Google apps.
Reboot and setup your phone.
We have been using this rom for many months and they have fixed all of the bugs (a few minor remain but they dont effect normal usage a lot). Only the following remain:
- compass
- BT Tether (Workaround - DUN using app BlueDun)
The rest are some minor bugs that people have noticed but it runs much better stock in any case.
Just ask around on the forum if you have questions.
alan-31 said:
I'm pretty sure there's no problem with the chip and it could be a problem with the phone software or the router/network.
But wait water damage? oh well. I guess you can try:
You will LOVE the present cygenmod mod, the new rom:
Download available here:
http://code.google.com/p/devsnest-developments/downloads/list
cm-10-20130529-UNOFFICIAL-presto.zip
Upgrade to 4.0.4 from Pantech first though or else you'll have problems. The new CM rom is awesome, smooth, fast and bug free for all you need. You'll be amazed.
Get help here:
http://forum.xda-developers.com/showthread.php?t=1487576&page=466
Backup your data, whatever you can (cost lists, etc).
Backup what you need into the SD card. Root, install recovery, copy google apps from that same link into SD card and also the rom. Check their hash codes to make sure you have the right files. Boot into recovery, and make sure you can access the two ZIP files in the SD card. Now format /system , /data, format cache and dalvik and then flash the rom and then Google apps.
Reboot and setup your phone.
We have been using this rom for many months and they have fixed all of the bugs (a few minor remain but they dont effect normal usage a lot). Only the following remain:
- compass
- BT Tether (Workaround - DUN using app BlueDun)
The rest are some minor bugs that people have noticed but it runs much better stock in any case.
Just ask around on the forum if you have questions.
Click to expand...
Click to collapse
thank you for all of this. turns out the wifi wasnt working because of corrosion. I took the motherboard out and cleaned the whole thing off with an old toothbrush and isopropyl alcohol. let it dry, put it together and wala. I had it on 4.0.4 then when i ran download tool it reverted back. its back on ICS now. re rooted. only thing that is really weird to me is the device is only recognizing 1gb internal memory. it comes with 12gb, and my computer recognizes it as 12.3gb. but i went to install a game and it said "low memory" so i went to uninstall and it said total memory was only 1gb.
I guess you can do some more drying/cleaning.
Water is conductive and if there was water when the phone was turned on at any time, it probably destroyed some chips. Memory and chips can be damaged by static shock for example.
So a short probably damaged the stuff. Cant be fixed other than a new motherboard. You could get a cheap broken screen phone from ebay and switch the motherboards.
http://www.ebay.com/sch/Cell-Phones...+burst&_dcat=9355&rt=nc&LH_ItemCondition=7000
hello guys hope you all are fine.
I am on stock ROM but my phone is rooted and I have made a ext partition of my memory card and using it with link2sd and I am going to install cm9 build 14 on my phone.You will need this information to answer my questions.
I have some questions in my mind so please help me.
1.in cm9 thread there's written that "Make sure you're running a proper working ClockworkMod-Recovery".I thinks so I am using yannou90 recovery so will I able to flash this rom or first I have to install this recovery from this link http://forum.xda-developers.com/showthread.php?t=2168725 ?
2.i am little bit confused between these 4 memory scripts (D2EXT+,INTEXT+,Mounts2sd,ungaze) or you can suggest me any better memory script and please include the link of the script.
please answer my questions I am a complete noob.
This is my first post so If i have posted in wrong section please move it to right section
Thanks in advance.
You've nailed the section, congrats
Now jokes asaid, your recovery is perfectly fine to flash whichever rom you wan't, the warnning is there for another reason, way back (1.5 years or something) there was some not succesfull attemppts with cwm(original one, not the one that you have)...... so don't worry, just follow instructions.
Now about your second question, I personnaly prefer mounts2sd becouse it has more options, the other scripts that you mentioned don't have this much options, but on the other hand, they are simpler to use and won't give you headakes if you play with them(mostly becouse you just can't). Also in my signature is really good explenation about memory scripts, check it out if you have some time
three more question.I saw a video on YouTube of installing cm9 in pico.He also wiped his cache partition so is it compulsory to do this? and the second is will i lose all my apps and ext partition after installing cm9 and the third question i have 1.5 gb of ext partition how can I extend it to 2gb.
rabih.idrees said:
three more question i was sawing a video on YouTube of installing cm9 in pico.He also wiped his cache partition so is it compulsory to do this? and the second is will i lose all my apps and ext partition after installing cm9 and the third question i have 1.5 gb of ext partition how can I extend it to 2gb.
Click to expand...
Click to collapse
Hey, Let me try to answer your queries.
1. Its better to wipe your cache partition. I dont know if its "necessary" or not but i always prefer to wipe it and have a clean flash of rom.
2. Start using Titanium Backup app. It will backup your apps+data to a particular folder in memory card. copy that folder in PC, after u r done with flashing just install titanium backup again and put the copied folder back in memory card. You wont lose your apps.
3. to expand 1.5 gb, use "ease us partition manager". its very user friendly. simply remove 500 mb from ur fat32 card and merge it with 1.5gb partition with correct extension.
prabhat228 said:
Hey, Let me try to answer your queries.
1. Its better to wipe your cache partition. I dont know if its "necessary" or not but i always prefer to wipe it and have a clean flash of rom.
2. Start using Titanium Backup app. It will backup your apps+data to a particular folder in memory card. copy that folder in PC, after u r done with flashing just install titanium backup again and put the copied folder back in memory card. You wont lose your apps.
3. to expand 1.5 gb, use "ease us partition manager". its very user friendly. simply remove 500 mb from ur fat32 card and merge it with 1.5gb partition with correct extension.
Click to expand...
Click to collapse
I have already made the backup of my apps don't need their data.as i already mention that i am using link2sd on my stock rom so I also want to clean my ext partition how will I do this? should I also wipe dalvik cache? I have also made a nandroid backup of my pico.
I have to DO A DATA WIPE / FACTORY RESET before flashing cm9 or after flashing cm9
Check out this video.. click here
and in the instruction there's said " DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)" I have to do this after flashing rom and gapps right?
No u have to do it before
BEFORE flashing roms you should wipe EVERYTHING! After that, it's just not needed.
All set I have flashed cm9 build 14 in my pico thanks all for guiding me,Now I want to use mounts2sd script and there's written no app should be installed before flashing mount2sd,I was setting up my WiFi.My phone automatically updated the google play store to 4.x.x and also installed google play store services so what should I do now first uninstall the update and google play store services and then flash the mounts2sd or just flash mounts2sd without uninstalling anything?
Small suggestion
why don't you try DroidSail Super App2SD Lite to move apps from Phone to SD it Pops a Notification whenever a new App is Installed here the link https://play.google.com/store/apps/...DMsImNvbS5kcm9pZHNhaWwuZHNhcHAyc2QiXQ..:good:
rabih.idrees said:
All set I have flashed cm9 build 14 in my pico thanks all for guiding me,Now I want to use mounts2sd script and there's written no app should be installed before flashing mount2sd,I was setting up my WiFi.My phone automatically updated the google play store to 4.x.x and also installed google play store services so what should I do now first uninstall the update and google play store services and then flash the mounts2sd or just flash mounts2sd without uninstalling anything?
Click to expand...
Click to collapse
Flash it without uninstalling anything. But I'd recommend the play store version of mounts2sd which has a GUI
Sachin Thomas said:
Flash it without uninstalling anything. But I'd recommend the play store version of mounts2sd which has a GUI
Click to expand...
Click to collapse
will it work same as the flashable mount2sd?
same as in the pic
http://dl.xda-developers.com/attach.../1/9/0/8/8/Screenshot_2012-10-21-17-12-01.png
or not?
rabih.idrees said:
will it work same as the flashable mount2sd?
same as in the pic
http://dl.xda-developers.com/attach.../1/9/0/8/8/Screenshot_2012-10-21-17-12-01.png
or not?
Click to expand...
Click to collapse
I can't view the image but the play store version is the same app and can be updated like any other app. Flashable version must be configured from terminal as it doesn't include a GUI
It should, if it doesn't you can always flash the other version, personally I haven't tryed it with cm 9(playstore mounts2sd I mean), but there should be no issues. Just if you have 'android is upgrading' after every boot (not the first) you can try setting, 'sd-ext type' to 'automatic' also you can dissable 'safemode' drom playstore app, but do that only if you have issues, if not this things are useles s
@ Sachin damn you're fast
Sachin Thomas said:
I can't view the image but the play store version is the same app and can be updated like any other app. Flashable version must be configured from terminal as it doesn't include a GUI
Click to expand...
Click to collapse
here's the pic bro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
my phone will also show this??
one more issue my computer is not detecting my pico.it starts charging but doesn't appear in my computer I also turn on usb mount storage after connecting my phone through Data Cable.I never had this problem in stock gb rom
this is not my screenshot but it appears like this and then I have to turn on usb storage.