Hi Guys,
Some of you may have had this problem where after installing the DINIK Anastasia Keyboard 3.0, you may want to go back to the default keyboard but the key numbers and letters are all white instead of the original black, this is a fix i found myself for people who have had trouble getting this to work in any other way.
1. Uninstall the Anastasia Keyboard 3.0
2. Make a Full Backup of your HD2 Saving the backup file on your storage card (Must be on storage card so you can restore it) (Using SPB Backup in my case)
3. Once the backup is successfully done, hard reset your phone clear the lot
4. Find where your backup file is saved and begin the restore procedure
5. Select Customize restore
6. Leave everything with ticks and tap the green settings cog next to System Data
7. Leave everything ticked and Select Customize... Button
8. Leave everything ticked and Tap Windows Folder scroll and find the file ezinput.dll and uncheck that one.
9. Proceed to restore your phone.
This way everything will get restored back to how the phone was excluding the file that messed up the keyboard which will revert back to the normal keyboard
Then you can install any keyboard as you want with the black keyboard lettering and numbers.
Hope this works for everyone, it worked for me.
The good thing is you will have a full back up incase anything does go wrong so no need to worry.
Thanks
Sir I don't get/understand way you open/wright this thread?
Reason way? Because on the Dinnik Anastasia Keyboard thread there is the fix cab! just by installing this cab it brings all back to normal. I don't think it can me more easier than this.
kurt-willems said:
Here you have a cab version who will restore the normal Keyboard. (also Font)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original Keyboard.cab
Click to expand...
Click to collapse
Thread closed due to another thread about the same subject already exists.
Related
Hello, I have a problem with the direct accesses of the principal screen. I use the program CSMI and when I add a direct access, I can see the modified icon, but when I put it in the direct accesses it doesn't work out modified for me, I only can see the old icon. I'm sorry but I don't speak English, here have a photos with my problem. Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm sorry but I believe that I've got confused putting here the Thread, If you can move.....thx!
with file explorer go into Application Data/HTC/ProgLauncher and delete icons cache, then you will see modified icons
HI mate!
I can give you the tipp use the new JWMD Iconchanger! he has an integrated icon cache cleaner!
http://www.mediafire.com/?to0y2odtx5f
where do i go into my programs files to put new icons , i guess its where u past them and do a soft reset and they will b their
dunnboy9984 said:
where do i go into my programs files to put new icons , i guess its where u past them and do a soft reset and they will b their
Click to expand...
Click to collapse
I first post all the icons in a folder on my SD card.. then change then using JWMD. then using JWMD again, I clear the cache file, and soft reset.
Then I go back to the file folder on the SD card and remove all the icon PNG files I did not use, and save the ones I did use in the file on the SD card.
that way if for some reason I have to do a hard reset, I have the icons already to go, and dont have to dig, or wait 5 minutes for JWMD to load all the images.
I *think* the OP is asking about the one or 2 icons that dont change in the quick link page.. Like the vid recorder, even after clearing the cache file.
I'm sure there is a way to fix it, but I dont know how (sorry). Up to this point I have no need to place those icons in my quick links, so I just kinda avoid it, and havent looked for the solution.
So I finally worked on the the Sense clouds, These are combination clouds that change with the weather. They were a bit tricky to modified them but they look very nice on the device. I will keep on working on them and I will update as I go on..Hope you guys enjoy them...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Open NinjaMorph
2. (Start Checks) Click on New Project
3. Scroll down to system (Tap to open)
4. Open framework (Tap to open)
5. Scroll down to (com.htc.resources.apk) it will then extract all files located inside the apk
This will create a folder on your SD Card by the name of AndroidThemes. Now you could go ahead and start replacing files with the same name and size.
Now you should connect your phone to your computer to get access to your SD Card.
SD Card>AndroidThemes>Workspace>comhtcresourceapk>res >drawable-hdpi
Now you will replace the the png's in the drawable hdpi folder with the ones that were provided in the zip file.
once you have replaced the necessary files go ahead and disconnect phone from computer as ninjamorph will need access to your sd card
1. Open NinjaMorph (Tap on Start Checks)
2. Tap on finish project
3. Find folder named comthcresourceapk and tap on it
4. It will start creating package
5. Click Yes to confirm
6. Click No on the next confirm action
8. You may get some force close windows (go ahead and force close them
9. Last confirm says (would you like to delete/cleanup the project? [click NO]
10. Reboot for changes to be applied (I usually do it with the Hot Restart)
Thanks! These look great!
Sent from my PC36100 using XDA App
this looks SICK! cant wait to try it!!!
a quick question, does the weather still animate with these?
Yes you still get the weather animation..
Awesome. Followed your guide and it looks great! Now I'm interested in changing the icons on my homescreen clock and weather widget. Do you have any insight on doing that? Thanks!
after installing android on my orbit2 [polaris],according to this post : http://forum.xda-developers.com/showthread.php?t=1120923
recently my phone goes crazy and nothing work ! camera ,wifi, and calling , not work and today phone signal is cut ! first i install android on this phone, everything good but i don't know why it goes to this
0.recently i just see this error "the application google services framework (process com.google.process.gapps) has stopped unexpectedly. please try again - force close" and everything not WORK !!!! why ?
1.how can i reset phone or reinstall android or any possible way to fix this problem!?
2.how can i use new setup files?
3.why there is no "just one" guide to install android on orbit 2?
clean all file on SD Card and put androidinstall.tgz file in SD card "andboot" folder again, reboot and hold the "Volume up" key until it come a boot manual, then select run "7" "3" "1" to install again, and final select "10" boot up.
boot manual reference here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks and just another question
raycho said:
clean all file on SD Card and put androidinstall.tgz file in SD card "andboot" folder again, reboot and hold the "Volume up" key until it come a boot manual, then select run "7" "3" "1" to install again, and final select "10" boot up.
boot manual reference here:
Click to expand...
Click to collapse
thanks alot raycho, it's worked. thanks
and now i want to use the newer version of android, because bluetooth and wifi in old version not worked. you think which version is better ?
read WIKI page > but nothing helped! many of links is broken or not found! how can i install android without haret.exe: because i don't have WM to run exe files !!
Hi!
Probably, most of you have experienced that Titanium Backup can't be used in some ROMs because of (for example) the incompatibility with ext partitions. That is why I make this mini-guide about how to restore apps (maybe on other ROM) previously saved with Titanium Backup :
What we need
Previously saved apps, on a external SD (Obviously )
ES File explorer (It can be downloaded via PlayStore)
NOTE BEFORE STARTING: You can't restore the data of the app, only the app (apk).
Let's start:
1- Enter on /sdcard/TitaniumBackup/ and search the app you wanna restore:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2- Let's asume that we want install "Flash Player" (for example). When we find it, we can see that there are three files with (moreless) the same name:
3- The only file we need is wich one that has the ".apk.gz" extension (normally it appears like the 3rd), ensure by long pressing it and then entering in "properties":
4- Once we have our desired file, we press on it and we will enter on the ".apk.gz" file. Then, press again and we will get the installation screen:
Ta-da! Magic!
Hope that this mini-guide helped you and of course, you liked it.
Thanks for the info man! I was using CM7 but it had not full superuser and ext support, so i couldn't work properly with it... Now I can install my saved apps.
Regards.
Big help, a massive thank you.
Obviously this would take forever, but thanks!
Thanks for the info but it's not working for me. I tried this using ES file explorer. I located the file alright, but when I tried installing it, it said install failed.
DId I miss something? or is there something wrong with the file?
Again thanks for the info.
neat but one question
Hey man i find your idea cool, but however that does not recover lost data, or am i doing something wrong?
Sorry for the necro, but this thread really helped me so I thought I'd chime in.
dc0054 said:
Hey man i find your idea cool, but however that does not recover lost data, or am i doing something wrong?
Click to expand...
Click to collapse
My Titanium Backup kept crashing everytime I tried to restore an app. I fixed this by following this guide and then going to the Titanium Backup to restore data. Once you installed the app with this guide the app shows up in Titanium under backed up apps. Then just click the app and ONLY restore data. No crashes and you get your data back!
First off I will say this is the greatest tool I have ever came across and I am thankful for anyone that ad hand in its production. The tool of course is here http://forum.xda-developers.com/showthread.php?t=873466 and it has been working great for me. But earlier today I used winrar to open a com apk file and edit a specific txt file however I accidentally didn't un-click the "use as default program" box and now right-clicking and apk file will not display the decompile option or install to phone option any longer. I figured since the default program had been changed it was not being recognized by one click apk any longer so I deleted the default program for the apk file type in the registry and uninstalled then re installed the shellext for APK_OneClick however the right-click apk options still will not show. I can recompile folders to APKs but nothing else. Any help with this issue is greatly appreciated and thanks in advanced it is driving me crazy.
I am assuming my problem is fro the whole winrar accident as the icon provided with OneClick no longer is displayed for apk files either I just can't solve the issue.
-
Can anyone shed some light on this for me?
JoshMan619 said:
Can anyone shed some light on this for me?
Click to expand...
Click to collapse
hey did u got the solution. if not follow this
first typeOpen Run then type REGEDIT
Press the Enter key on the keyboard
Click Continue in the User Account Control dialog
if necessary
Browse to:
HKCU\Software\Microsoft\Windows
\CurrentVersion\Explorer\FileExts\.zip
(HKCU is HKEY_CURRENT_USER) - To do this:
Click the triangle next to each item (HKCU, then
Software, etc)
When you get to .apk click the right mouse on this next
Press the Delete
then install one click apk shellext-add
The directory is looks like below pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}