I've not got my XDAII yet.....but curious to know whether this setup works, i.e. XDAII installed with MS Voice Command and wearing the Bluetooth headset - do the voice commands work ok through the headset down to the XDAII or do the commands have to be spoken to the XDAII directly ? Also, is it necessary to have to push a button on the XDAII before you speak to it - or does it listen all the time ?
Thanks for your help,
Nutz
Voice Command doesn't work with a Bluetooth headset.
You need to press a button on the XDA2 to invoke VC and make it accept a command. This must be because it's so sophisticated that if it listened all the time, it would a) run your battery down, and b) hear commands that you didn't intend.
but even....
so, there is no way to make my XDA II work as my old SonyEricsson T610 (on SE T610 - when I perss button on headset and say voice command into it and than it repeats me that command for check and running it...) - no way to achieve even half of this on XDA II ?
( )
I understand it can be done using the supplied wired headphone, but no, not with bt headset. Too bad!
is this the same as voice dialing ?
my bluetooth headset manual says to press the button and speak the command to dial the contact
this is a Sony-Erricsson HBH-35
surely some software somewhere for the XDAII would support this ?
Is there a way to start Microsoft Voice Command with a voice command?
I don't like to press a butten to do a command.
Maybe a workaround with another app?
Thx!
but then the other app would to include all the same voice recognition as voice command does
it would be about as big as voice commander and use as much memory
and use cpu because it would have to listen for the special start voice command command
i know what you mean, the old ms voice for win98 already had the option to say "computer", folowed by a "ding!" from the computer to acknowledge that the computer is ready for a command. (bit like startrek)
does anybody know if it is also posible to start voicecommands with the button on the headset? thisway it would be an exelent remote for media player when you have your phone in your pocket.
:lol:
Hi !
I'm trying the demo version of MS Voice Command, and I would like to know if there is a command to start a call in handsfree mode :
Ex : CALL JOHN SMITH AT HOME HANDSFREE
or something like that.
It can be usefull to do so when giving a call when driving : only one button (activate MS VC).
Hi I have an Alpine running 2003 se, with Fonix voice installed. I am not getting on very well with this software, what I would really would like is something like the software in my Razor V3, it gives me the ability press the button on my Blue tooth headset to voice dial a number, and when an incoming call is received it says the name in the bluetooth headest before ringing. Is there any software available that could do that with the Alpine ?
Microsoft Voice Command does this, and you can buy it on www.handango.com but check to see if it works on WM2003 as I'm not sure off the top of my head.
Hi unfortunately Voice Command only works with WM5
Maybe someone knows of another software that will do the job....
older versions of voice commander works on 2003
I would like to know if the application Cyberon Voice Speed Dialer works on the HTC Touch HD2 through Bluetooth headset?
How to adjust start of the program by the headset’s button?
I'm also looking for a working version
Count me in too.. All the Cyberon Voice Speed dial and Voice Commands .cab's out there
won't work.
They won't have you press your headset button and talk to call.
It will have you be able to press a button on the phone and talk to call.
But of course, we all want to press the button on the BT headset while driving and so.
The cab in the 4th post down. Cyberon voice, it worked for my TD2
http://forum.xda-developers.com/showthread.php?t=509120
RE: How to attache the voice speed dialer to a button?
Any idea how to attached the voice speed dial to button 1? Since on the HD2 when you went to the button menu - there are none shown to be selected
Try setting the authenticated connection to OFF
Try setting the authenticated connection to OFF
This works !
Start-Settings, then <menu> All settings (its the quickmenu bottom right)
Bluetooth -
there you can set properties (nickname and authorized connections)
Deselect authorized connections
please your comments !
Hold button enable for Cyberon speed dial
Hold button enable for Cyberon speed dial
tsipistri said:
Hold button enable for Cyberon speed dial
Click to expand...
Click to collapse
You are my sunshine, my only sunshine
You make me happy when skies are gray
You'll never know dear, how much I love you
Please don't take my VOICE CALL away
Thanks you are the best dude
then we are only missing: through Bluetooth headset....
Can some one fix that to??
Cyberon cab
This one works well, courtesy of Miri.
Sorry,
Cyberon speed dial hold button.cab doesn't work with Miri's CVSD without tweaking links.
Works well with what ? With BlueTooth ?
maymaymay said:
Works well with what ? With BlueTooth ?
Click to expand...
Click to collapse
No.. BT button not working... Just from menu (or hard key on device)
Miri CVSD
maymaymay said:
Works well with what ? With BlueTooth ?
Click to expand...
Click to collapse
Works well, works well with bluetooth too.
I have a Blueant supertooth handsfree.
I press the send key and CVSD starts and responds to commands.
If MSVC is installed it is then the default app when handsfree send is pressed.
Xaddict said:
Works well, works well with bluetooth too.
I have a Blueant supertooth handsfree.
I press the send key and CVSD starts and responds to commands.
If MSVC is installed it is then the default app when handsfree send is pressed.
Click to expand...
Click to collapse
BlueTooth Voice Dail working on the HD2 (leo) ??
BrownGhost said:
BlueTooth Voice Dail working on the HD2 (leo) ??
Click to expand...
Click to collapse
Yes, with Microsoft Voice Command, not with CVSD
Is there any way to re-configure this application to attach to the voice speed dealer button 4 (hold) which is the remote headset button instead of button 1? This will enable long press of the bluetooth button to activate the speed dialer. I hope it will be a minor change of this application, but it will help a lot.
Forgot - I mean the application provided from Tsipistri - Cyberon speed dial hold button.cab
maymaymay said:
Yes, with Microsoft Voice Command, not with CVSD
Click to expand...
Click to collapse
How did you get MSVC work with bluetooth on the leo.
My MSVC sounds do not get redirected to the headset but come out of the device-speaker.
Which version do you use?
Hi All
HD2 and MSVC
CVSD works fine for me using MIRI's cab - tried several others with no luck
Does any one have a working version of MSVC for the new HD2
I have always had MSVC on my previous phones setup for anouncing calls and use CVSD for voice dial.
This has worked flawlessly on my last Touch HD running WM6.5 rom but the current version of MSVC I have will not annouce calls via my bluetooth headset no matter what I do - will only annouce via the phone speaker.
Any help with this would be greatly appreciated
Cheers
maymaymay said:
Yes, with Microsoft Voice Command, not with CVSD
Click to expand...
Click to collapse
can not get: MSVC to work at alle, error under installation.
maybe you can post a compleat set of things to use that works.
program to do voice call
BlueTooth - voice call
and press and hold call botton = voice call
thats the things we need, all of us in here..