I've Recived one HTC ELF for language Change to wwe , i used first USPL 1.17 from pof and flashed with Original Orange WWE rom and it works fine for me 1 time when i turn off my phone and turn it back on it shows Smart Mobility screen and then turned off itself i then downloaded 5 to 6 differen ROMS to flash it all files successfully flashed but problem still there that it shows SMART MOBILITY and turn off, so i thought its totally bricked and its 1 week including today to find the proper solution for it, but i couldn't find suddenly i see this thread today: http://forum.xda-developers.com/showthread.php?p=2906450 and downloaded 2.28 http://forum.xda-developers.com/attachment.php?attachmentid=130001&d=1226721142 file and flashed it using UpdateUtility from pof's UPSL 1.17 and voila my phone is back on and kicking.
This is my Experience which i shared here.
Take Care
ENJOY
Software Solutions said:
I've Recived one HTC ELF for language Change to wwe , i used first USPL 1.17 from pof and flashed with Original Orange WWE rom and it works fine for me 1 time when i turn off my phone and turn it back on it shows Smart Mobility screen and then turned off itself i then downloaded 5 to 6 differen ROMS to flash it all files successfully flashed but problem still there that it shows SMART MOBILITY and turn off, so i thought its totally bricked and its 1 week including today to find the proper solution for it, but i couldn't find suddenly i see this thread today: http://forum.xda-developers.com/showthread.php?p=2906450 and downloaded 2.28 http://forum.xda-developers.com/attachment.php?attachmentid=130001&d=1226721142 file and flashed it using UpdateUtility from pof's UPSL 1.17 and voila my phone is back on and kicking.
This is my Experience which i shared here.
Take Care
ENJOY
Click to expand...
Click to collapse
try resetting....by pressing.....red and green hard buttons togther with power button above....hope it will work.....
Related
Hi all,
yesterday, i thought it's a nice day to do the official german t-mobile 1.12 upgrade on my official german t-mobile mdac. It wasn't.
After the upgrade (no errors) the bootscreen shows:
no gsm, and only one Version number: 1.12.01 Ger
on the bottom line.
After it bootet, i get no gsm and no bluetooth working. When i connect by usb, active sync hangs for about 3-5 minutes. If i try to repeat the upgrade, i get something like wrong device, and it shows empty fields on the version screen. I tried to do the update by extracting the official update rar and start the update by MaUpgradeUT_noID.exe, but it says something like wrong device.
I tried this to the same with the 1.13 upgrade from the xda ftp, same thing. I tried a rombackup from sd-card that i found somewhere on the net, but the bootloader says wrong section=1 not allowed.
Is there anybody wo could help me to resurrect my poor little mdac?
Thanks alot,
J
Hi J.
Don't know how to solve all your problems with upgrading, but did you copy the first bytes of your own romdump to the downloaded rom? Otherwise your device won't accept it, you can find a lott about this in other threads. try searching for BigStorage and you will everything about rom upgrades.
Good luck, M
Upgrade your device with the imate rom 1.12 wwe using MaUpgradeUt_noID.exe ,it should work ,then try to upgrade to the german rom upgrade.
Good luck
ongoing revival
Ok, i tried that big storage thing, i replaced the id in the new image from my backup (broken) rom, and when trying to upgrade from sd-card, i get Section = 1 not allowed update.
I'm trying to upgrade the radio stack from the bootloader screen with MaUpgradeUT.exe, but it seems that the usb port doesn't work: for 10 minutes, the update screen stands at 0%, then an error appears:
Radio Rom Update Error.. i should reset, reconnect and retry.
Any more ideas? Is there a possiblity to do the normal "online" update (not via bootlaoder/backup-image) just from sdcard?
Please Help
J,
Last night I did a BigStorage in a very easy way. I followed the description in the thread about upgrading to radio 1.13. You'll have to unzip the shipped rom, decode nk.nbf it with dnbf. Then you replace the usual bit pattern and encode nk.nb1 again. After that you can use maupgrade with or without the noid function like a regular apgrade.
Hope it helps you, M
The story: Received an new O2 XDA NEO from Germany. Being portuguese I don't know nothing of german idiom. I dowloded the JAMIN Eng. rom from the FTP and tryed to unstall this rom. With the ROMUpadte utility that comes with the ROM I get an error. With the ROM Update Utility_NOID the process stars and go normally until 95%. Here, after some minutes give me an error saying I can't upagrade with the NBF file.
I was a little passed out thinking that instead a phone I had a brick. Pul out the batery for moments. After I turned on the phone and it shows the tri color scren of bootloader. Ok conect the usb cable again and start the upgrade to the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID. and voila... the process completed without problems.
The weird thing is why my phone doesn't accept the JAMIN rom?
Anyone has an expplanation for that? Thank you
can you tell me wehere i can download a jamin rom ? then i can test it with my o2 xda neo
I upgraded my Neo to jamin rom without a problem. I was using the RomUpdateUtility by machinagod, which you can find in this forum. But now I have switched to RUU_2151327..._DOP_ASIA_WWE too. To me, the new version DOP_ASIA_WWE rom works much better than that jamin. More fast, more effective. The JAMIN always runs out memories and makes the CE-Star chinese input inactive, especially when WiFi used. The DOP_ASIA rom rarely meets such problem.
Upgrade rom
You can only upgrade rom but can not downgrade. So now you are at 2.15
but Jamin is at 2.13.
Hi,
upgraded qtek s200 with RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe, using ROMUpdateUtility-NoVendorID.zip, which does not check Vendor ID.
No major issues so far. During boot dispays Dopod instead of QTEK .
Besides, few differences I found in voice diler and new program called AutoConfig. Appears, to configure automatic settings for your GSM carrier, but only for ASIAN operators, which is useless to me. No worries, interface still English.
It was mentioned few times in this forum, that you may experience some "delays" during flashing your device - don't panic, don't touch it, just wait for some time, it will finish on its own.
Good luck with upgrades.
de yl1wc
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
Wm6 Roms can only be upgraded if you have an IPL/SPL 2.xx,as I can see from your present Rom version 1.1.7.5,you must be having IPL/SPL 1.xx,therefore,it's not possible to upgrade to wm6,untill and unless you upgrade your phone to IPL/SPL 2.xx.
First flash T-mobile 2.26 to upgrade to 2.xx and then flash any wm6 rom.
Good luck
be sure that unlock means both "cid and sim" unlock, because sometimes it is network unlocked only, you can use your device with different networks using different simcards, to flash a rom you need the device cid unlocked, read the guides
Hi , thanks for the reply, i must mention that my phone is a QTek 9100 please tell me if the T-mobile 2.26 will install on my phone. if it can please can u give me a download link to it.. I've been searching the site but i haven't found any..
nannhy
Are u sure your phone is CID unlocked? use the wizard service tool to be sure. U can download the t-mobile ROM here: http://www.t-mobile.com/wmupgrade/ You need to have a t-mobile phone number. If u dont know any, PM me, and ill let u use mine, u dont have to pay, its just to make sure that ur a t-mobile customer.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
XM6R2a is NOT wm5...if you "installed" it and you are still on wm5 then your phone is NOT cid unlocked which is probably what the communication error (302?) was trying to tell you in the first place. Follow the "how to flash a wizard" guides that are a sticky at the top of the forum.
Hey thanks to everyone who have been offering information, my progress so far, i've CID unlocked my phone and i reinstalled the pro+home wm6 and all is working, except i cant use my camera, cause i dont have enough memory as is replied by the os, i'm going to try the t-mobile updated as pointed out in a previous post.
Hey guys, about 10 minutes ago, i noticed that the start button for my phone acted weirdly. It is appearing and dissappearing as if someone is touching it, but the phone is flat on the ground. My fingers are not touching the screen yet the phone is acting as if someone is pressing the screen. After reseeting it, the touch screen went dead. I can navigate with the dpad but not when i press the screen. So i believe it is time for me to send the phone for warranty.
I am from Malaysia by the way.
MY phone is currently flashed (hard-spl) and am running on Topaz Rom. I have also installed the custom boot screen (bios) made available here by a forumer via hard-spl.
My question is, how do i remove the hard-spl and the boot screen that is flashed by hard-spl?
Also how do i remove everything so the phone will qualify to receive the warranty?
I do have the stock ROM but i believe i need to do more than just re-flashing the phone with a stock ROM to claim warranty.
well flashing the stock rom should be the first step. then you have to find the original SPL. someone on here will help you with that, I'm sure.
ok here is what i did when i sent my phone in for HTC warranty in the US:
1) Flash stock radio or any latest radio from your area (if you remember the number of the radio that came with your phone find it here: http://forum.xda-developers.com/showthread.php?t=439566
2) Then flash the stock ROM.
3) Then flash the stock SPL (Find your here http://forum.xda-developers.com/showthread.php?t=499791 then follow instruction bottom of first post here: http://forum.xda-developers.com/showthread.php?t=410150
Then check to make sure you have the right radio and go into boot loader to check spl
Thanks for the suggestion jaszek.
And Thank you very much ptyindian for providing the steps , which is quite easy to read.
About the radio, i don't think i have to flash the radio since the official latest ROM that comes from HTC's site already contains a Radio. So i am safe here right?
About the stock SPL, i am not sure which is mine. As i am from Asia (Malaysia) , which one should i get?
1) SPL 5.05 - Extracted from Official HTC ROM (WWE)
or
2)Extracted from Official HTC ROM - Southeast Asia - Sintel-English
. Also , what is the difference between the above 2 and this one :-StockSPL_ForWarrantyOnly_SPL190_1.zip
Yes if you installed the latest rom that was release by HTC and it has a radio included then you are safe about the SPL i am not sure which one you need to flash but i think the spl1.90 was what came with the ATT fuze i think or atleast that is what i had. Maybe some one else can help you more with the exact details on which SPL you need or you can post in the SPL thread and see if some one helps you.
ive got a t-mobile wizard 200 dutch edition
i had a win 6.5 rom loaded and it worked fine
but for some wierd reason i wanted to downgrade it to the original win5 rom
when i was at 55% my 1 year old sun pulled the usb cable
now i can't get any new rom in the phone that works
is there anyone that could help me
everytime i get the bootloader screen and that's al
Don't give up hope. As long as you can get the bootloader screen, you should be able to burn a rom. Try the CR96 WM6.5 ROM, in my signature, which if I remember right comes with a Vista RUU. If it doesn't, search this forum for Vista RUU, which I have found to work well for installing ROMs from the bootloader, in XP or Vista. I don't know about Windows 7, since I have never had it.
i've tried the link you sugested
after running the update the startup screen of the phone changed from t-mobile to a HTC logo and after that it shows the bootloader and nothing more
ipl 2.18.001
spl 2.26.001
is there anyone with an original rom for this phone becouse the one i thought was original is damaged and maybe an original rom can repair this phone
or is there anyone with different idea to solve this problem ?
edit: i found an original german ship rom but when i try to laod that on the phone he gives a error
something with wrong phone id
edit: i found a file with t-mobile g4 ipl/spl after i loaded that one
ipl changed to 2.26.001 spl stayed 2.26.001 but stil no respnce to loading roms
i found a threat where they where talking about the love rom
i downloaded it and uploaded it to the phone and everything was back online and i could do anything again with the phone