Hello,
So I know there has been couple threads in regards to MHL's before but none answered my question...
I went ahead and bought a MHL connector yesterday, tried hooking it in to my flatscreen with new HDMI cable I also bought at the same time, all from frys electronics. I had seen pictures of that MHL connector on multiple post stating it works so I sure figured it would for me. But for some reason I was unable to get mine to work.
I have tried
rebooting the phone (with and without mhl plugged in)
giving the phone a full charge before trying it.
plugging power output to laptop or wall (laptop is closer than wall but either way none worked)
but at no time did I get a response from my phone or tv other than it charging my phone? I am understanding that when I plug it in to the MHL I should have a new icon popping up on the top of my screen but it's not
I am currently running zydroid latest rom 2.0 (great rom by the way)
Is anyone else having such issue or can anyone assist me in this regard. Or even better yet, anyone with zydroid rom able to assist me?
Thanks a bunch
I'm on stock but I have one that is made by Samsung? I've heard of knock off ones not working with phones but I guess that's people's own experience....And with my mhl converter to hdmi it has to have my phone charger connected directly to the converter while the other end of mhl converter connects to my phone. It's a mess of cords but it works....I've tried others and this is the best one that works with my galaxy s2 and sensation. I bought mine on amazon for like 13 bucks.....try searching Samsung mhl to hdmi ....hope u figure it out.
Sent from my HTC VLE_U using xda premium
I figured it out... turned out to be the MHL was defective, Thanks bud
HTC One S MHL Connection
I have the OEM HTC Sensation MHL adapter and it works perfectly on the HTC ONE S.
You can also buy the MHL adapter from monoprice.com which works and offers 7.2 audio.
I've bought a Digitazz MHL To HDMI Adapter, but no mater which ROM I try, no matter whether I try to connect my Sensation to my laptop or my TV......nothing happens.
I don't get any notification on the phone, nothing on the TV...arghhh, the frustration.
I know the HDMI cable i'm using is fine, as links up to my freeview box ok, blu-ray player ok and my TV.
Phone is plugged in and show as charging when my phone is linked up to TV.....tried retarting phone, different Sense 3.6 Roms etc..nothing is working.
Am I not doing something, or it it prob just a case of cheap rubbish MHL to HDMI adapter I bought?
Just HTC versions of the adapter work?
any Ideas...be very much appreciated as i've tried everything.
cheers
Matt
Attached pics of the MHL to HDMI I'm using.
I used 2 types of non htc adapters, both worked.
What power supply did you connect to the adapter? I think only 1a 5v will work for mhl..
Sent from my HTC Sensation using xda premium
In some roms HDMI will not work. Look in change log it will tell you if it's working or not. Usually its written in BUGS section. Check your current Rom to see if it's supported . If I remember correctly most don't work but you need to check and see if that could be the issue.
Sent from my HTC Sensation 4G using xda premium
realsis said:
In some roms HDMI will not work. Look in change log it will tell you if it's working or not. Usually its written in BUGS section. Check your current Rom to see if it's supported . If I remember correctly most don't work but you need to check and see if that could be the issue.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
MHL works on all the largely adopted roms, elegancia, ARHD etc.
Also, it's more a kernel thing than a rom actually.
The OP mentioned a couple of roms were tested. perhaps it would benefit the test to add stock as well just in case?
Sent from my HTC Sensation using xda premium
I'm also struggling with MHL on my Sensation. After searching the internet, the few tips I picked up that worked for others are:
1. You need to plug in power via the extra micro-USB port on the MHL adapter. Some have said that it needs a high-current power source (1A) which the HTC charger produces. 3rd party USB chargers sometimes output a lower current which some people find causes their MHL not to work. Also, using MHL seems to drain battery pretty quick and you need a high-amp power source to keep the phone charged or prevent it from draining too quickly.
2. If it is the first time using MHL, try plugging in the MHL(USB) to the phone then rebooting the phone. This is supposed to make your phone recognize and "activate" the MHL/HDMI capability(?).
3. I also read about playing around with TV settings. For one user with a Sony Bravia TV, he had to go to the tv settings -> external inputs -> HDMI and turn off HDMI device control or something.
4. Not all Sensation ROMs support MHL, for example CyanogenMod.
In my case, I bought a 3rd party MHL adapter and it didn't work the first time even with power connected to MHL. Then after (2) above, I finally saw the HDMI logo appear on the notification bar and it worked pretty well in my first 10mins of experimenting...nice picture with sound too. Then I tried playing another video and this time there was no sound from the TV. So I unplugged and reconnected the MHL connector from my phone and ever since then I have not been able to get MHL to work I'm using ARHD 3.6.1 ROM so I'm not sure if that is the problem. Still looking for solutions...
You might want to make sure that your TV actually supports MHL as not all do. I can't see how a laptop would support it, most don't even have a HDMI input?
The most trouble I've ever had with MHL is the sound sometimes doesn't work, but just unplugging then replugging the phone cures this.
BMamba550 said:
....
In my case, I bought a 3rd party MHL adapter and it didn't work the first time even with power connected to MHL. Then after (2) above, I finally saw the HDMI logo appear on the notification bar and it worked pretty well in my first 10mins of experimenting...nice picture with sound too. Then I tried playing another video and this time there was no sound from the TV. So I unplugged and reconnected the MHL connector from my phone and ever since then I have not been able to get MHL to work I'm using ARHD 3.6.1 ROM so I'm not sure if that is the problem. Still looking for solutions...
Click to expand...
Click to collapse
I finally managed to solve my MHL problem by flashing ARHD 3.6.8 ROM...so in my case it seemed to be the ROM version that didn't work well with MHL. It mirrors my phone screen pretty well although Sensation resolution is quarter-HD so on my HD TV the picture is less sharp, but acceptable.
boomboomer said:
You might want to make sure that your TV actually supports MHL as not all do. I can't see how a laptop would support it, most don't even have a HDMI input?
The most trouble I've ever had with MHL is the sound sometimes doesn't work, but just unplugging then replugging the phone cures this.
Click to expand...
Click to collapse
I have this same problem, my adapter works and shows on my phone that it connected but my TV does not support MHL as only certain TV's actually support this standard, and oh plus that fact that my current ROM doesnt support it
My Laptop has a HDMI connection and so does my HD TV....but didn't know the TV had to support MHL....I just thought it was a case of if it's a HD TV, with HDMI connections, then it would work?
Hmmm....I'm not getting ANYTHING in my notification area on my phone either though.
Gonna try some of these suggestions and will report back.
Ps: As far as Chargers and power sources etc...all mine are HTC Genuine ones.
Thanks for help guys....will be back soon, coz i'm off to experiment..hehe:laugh:
Matt
matthew33 said:
My Laptop has a HDMI connection and so does my HD TV....but didn't know the TV had to support MHL....I just thought it was a case of if it's a HD TV, with HDMI connections, then it would work?
Hmmm....I'm not getting ANYTHING in my notification area on my phone either though.
Gonna try some of these suggestions and will report back.
Ps: As far as Chargers and power sources etc...all mine are HTC Genuine ones.
Thanks for help guys....will be back soon, coz i'm off to experiment..hehe:laugh:
Matt
Click to expand...
Click to collapse
Hope all goes well in your test's, My process was to power up the adapter first using my genuine htc charger first then plus in the HDMI cable from the adapter to the TV then plug the adapter into the phone last. If it does not show up on the phone notification bar to begin with restart your phone with it all still plugged in failing all of that then time for a new ROM and kernel probably Good luck
hoaxy32 said:
Hope all goes well in your test's, My process was to power up the adapter first using my genuine htc charger first then plus in the HDMI cable from the adapter to the TV then plug the adapter into the phone last. If it does not show up on the phone notification bar to begin with restart your phone with it all still plugged in failing all of that then time for a new ROM and kernel probably Good luck
Click to expand...
Click to collapse
Cheers for reply, but tried differerent Roms and kernels...nothing happening.
I give up.
Matt
I've got a similar problem where not matter what ICS ROM or kernel I used it wouldn't work.
(see http://forum.xda-developers.com/showpost.php?p=31797423&postcount=17)
However, in my case, it works fine with GB connected to a Sharp TV, but for some reason not ICS!
It also works fine with ICS connected to other TVs (tested on Samsung and LG) and on a PC monitor (through HDMI to DVI cable).
Just not with the Sharp TV!
Very frustrating!
hey guys, i have been trying to get this to work but all to no avail have tried the suggestions, all of the kernels i can find ect but i am just not having any luck. i am also not having any joy with usb-otg. could the 2 be linked?
Just a couple of thoughts. I've only skimmed the thread so I apologise if I'm repeating something mentioned earlier.
I can confirm that NRG's current EnergyROM which features a stock kernel and Sense 3.6 works with MHL (at the moment MHL doesn't work on any Sense 4 ROMs as far as I'm aware).
Also, I recently visited my folks and tried to show off some photos on their TV. For some reason MHL would only work on ONE of its four HDMI ports. I didn't have the time to figure out why, but there you go. Maybe those having difficulties could visit a tv shop and try plugging their phone into a variety of tvs for troubleshooting purposes.
Other things to note: On some TVs my MHL connection works at 720p and 60hz (which is good). On others it runs at 1080i at 24hz which makes for a crappy experience (jerky).
ICS ROMs have greatly improved performance when using MHL so steer clear of gingerbread.
MIUI ROMs should also support MHL (I've tried a couple).
Finally, I sometimes use a battery pack that I bought via Amazon to power the MHL connection when I'm out and about. If you decide to experiment this way, make sure you buy an external battery that has a 1 amp output per USB port.
I'm typing this with a bluetooth keyboard while my phone is connected to my tv, so it can work : ) I bought this MHL adapter: http://www.amazon.co.uk/FoneM8-MHL-Cable-microUSB-HDMI/dp/B0060Z8CYK
---------- Post added at 12:09 AM ---------- Previous post was at 12:03 AM ----------
heavy_metal_man said:
hey guys, i have been trying to get this to work but all to no avail have tried the suggestions, all of the kernels i can find ect but i am just not having any luck. i am also not having any joy with usb-otg. could the 2 be linked?
Click to expand...
Click to collapse
I've only tried USB on the go once, using a dedicated USB on the go cable for a Galaxy SII and a small externally powered four port hub in conjunction with Sebsatian FM's kernel and the most recent EnergyROM. I was able to browse a flash drive and connect a wireless keyboard and mouse. I couldn't really see the point as you can't use MHL at the same time, and you have to provide external power (unlike, for example, the Galaxy Note which will allow you to plug flash drives etc into the adapter without external power).
Ouzo said:
Just a couple of thoughts. I've only skimmed the thread so I apologise if I'm repeating something mentioned earlier.
I can confirm that NRG's current EnergyROM which features a stock kernel and Sense 3.6 works with MHL (at the moment MHL doesn't work on any Sense 4 ROMs as far as I'm aware).
Also, I recently visited my folks and tried to show off some photos on their TV. For some reason MHL would only work on ONE of its four HDMI ports. I didn't have the time to figure out why, but there you go. Maybe those having difficulties could visit a tv shop and try plugging their phone into a variety of tvs for troubleshooting purposes.
Other things to note: On some TVs my MHL connection works at 720p and 60hz (which is good). On others it runs at 1080i at 24hz which makes for a crappy experience (jerky).
ICS ROMs have greatly improved performance when using MHL so steer clear of gingerbread.
MIUI ROMs should also support MHL (I've tried a couple).
Finally, I sometimes use a battery pack that I bought via Amazon to power the MHL connection when I'm out and about. If you decide to experiment this way, make sure you buy an external battery that has a 1 amp output per USB port.
I'm typing this with a bluetooth keyboard while my phone is connected to my tv, so it can work : ) I bought this MHL adapter: http://www.amazon.co.uk/FoneM8-MHL-Cable-microUSB-HDMI/dp/B0060Z8CYK
---------- Post added at 12:09 AM ---------- Previous post was at 12:03 AM ----------
I've only tried USB on the go once, using a dedicated USB on the go cable for a Galaxy SII and a small externally powered four port hub in conjunction with Sebsatian FM's kernel and the most recent EnergyROM. I was able to browse a flash drive and connect a wireless keyboard and mouse. I couldn't really see the point as you can't use MHL at the same time, and you have to provide external power (unlike, for example, the Galaxy Note which will allow you to plug flash drives etc into the adapter without external power).
Click to expand...
Click to collapse
thank you for your chip in pal but i am still having no joy, jumped straight to the latest energy rom, installed and hooked up but no joy. i have tried both ports, rebooting with the cable in, different power sources. nothing. im beginning to think its gonna be my phone i will test this out when i get into work, as we have a hd tv there as well (allowing i get the time ) but im starting to lose hope would be so epic to be able to put my emulators onto the big screen and have goldeneye mulitlpayer matches at lunch in work
heavy_metal_man said:
thank you for your chip in pal but i am still having no joy, jumped straight to the latest energy rom, installed and hooked up but no joy. i have tried both ports, rebooting with the cable in, different power sources. nothing. im beginning to think its gonna be my phone i will test this out when i get into work, as we have a hd tv there as well (allowing i get the time ) but im starting to lose hope would be so epic to be able to put my emulators onto the big screen and have goldeneye mulitlpayer matches at lunch in work
Click to expand...
Click to collapse
That's weird. Got any mates with MHL enabled phones you can try your adapter on? I hate problems like this, they drive you mad and you end up doubting pretty much everything you've tried. Seriously though, you do realise MHL only works on the third Thursday of the month and if you wear underpants on your head, yeah? Oh, and stand on one leg ; ) Good luck.
Other than trying that different tv at work and possibly a different HDMI cable and MHL adapter, I'm not sure what else to suggest.
Ouzo said:
That's weird. Got any mates with MHL enabled phones you can try your adapter on? I hate problems like this, they drive you mad and you end up doubting pretty much everything you've tried. Seriously though, you do realise MHL only works on the third Thursday of the month and if you wear underpants on your head, yeah? Oh, and stand on one leg ; ) Good luck.
Other than trying that different tv at work and possibly a different HDMI cable and MHL adapter, I'm not sure what else to suggest.
Click to expand...
Click to collapse
its definately beginning to feel like that. my friend in work has an gs2, which i believe is mhl enabled. so tomorrow when i get into work i will try steal hm and the hdtv in work and see if i can get anywhere. at this point its either my £230 hdtv ()
my £360 phone () or my ****ty as mhl adapter from ebay /)
i guess we shall see tomorrow :/ will be gutted if its the phone. just out of interest has anyone got this going on the XE version of the sensation? as this is what i have.
still, thanks for your input bruce said that he is going to look into fixing the mhl on his CMX nightly, so if we can get this going i will be in emulator heaven
(off topic but XDA just censored me =0 automatically =O)
heavy_metal_man said:
its definately beginning to feel like that. my friend in work has an gs2, which i believe is mhl enabled. so tomorrow when i get into work i will try steal hm and the hdtv in work and see if i can get anywhere. at this point its either my £230 hdtv ()
my £360 phone () or my ****ty as mhl adapter from ebay /)
i guess we shall see tomorrow :/ will be gutted if its the phone. just out of interest has anyone got this going on the XE version of the sensation? as this is what i have.
still, thanks for your input bruce said that he is going to look into fixing the mhl on his CMX nightly, so if we can get this going i will be in emulator heaven
(off topic but XDA just censored me =0 automatically =O)
Click to expand...
Click to collapse
The SII is definitely MHL enabled (well on the stock ROM at any rate) - I hope it doesn't work so at least then it's hopefully just a £10 mhl adapter and not the phone or tv ; )
Ouzo said:
The SII is definitely MHL enabled (well on the stock ROM at any rate) - I hope it doesn't work so at least then it's hopefully just a £10 mhl adapter and not the phone or tv ; )
Click to expand...
Click to collapse
OK so apparently plugging my phone in at work counts as theft of electricity and I can get sacked for it
So I may take longer to find a HDTV and another test device :banghead:
Sent from my HTC Sensation using xda premium
heavy_metal_man said:
OK so apparently plugging my phone in at work counts as theft of electricity and I can get sacked for it
So I may take longer to find a HDTV and another test device :banghead:
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
LOL, you must work for the NHS or local government or something. Still, you made my girlfriend and I laugh : ) Maybe try a Currys or a Richer Sounds or something. There's bound to be someone in there with a decent smartphone, and there will be plenty of TVs to try too! If they haven't got a clue what you're on about, you might just educate them a bit ; )
I have an infuse dock, hoping to be able to connect one cable in car for charging/audio. when i plunk my ns4g (using codename 3.6) into it, it seems to know it is in a dock, brings up the alarm clock app, but sound comes out of phone speaker, not headphones attached to dock. i also have an epic 4g tough that does the same thing on cm10. Is this a hardware issue, kernel issue, etc? Is it even possible with an NS4G?
Could someone confirm that the NS4G doesn't have the right hardware to provide analog audio out through USB? WOUld love to just forget about this, but until I get confirmation it's driving me nuts. nOt looking for USB DAC, just would prefer to have only one cable for charging and audio out, or to use my infuse docks.
It doesn't as far as I'm aware. I'm wondering though if it's an app thing or really a hardware thing.
Hi All,
I'm trying to get a USB device connected to my phone (specifically an OBDII reader with Torque Pro). No matter what I do, I can't get it to recognize on my Nexus S 4g. When I run USB Host Diagnostics, it basically says it can't find anything.
I'm running a flavor of Cyanogen 10 with its stock kernal.
My questions are:
Do I need to go through a powered USB hub to get the proper power?
Do I need a specific kernel with the correct host modules enabled? (if so, can someone point me to one)
Thanks,
Torque Pro worked fine with my NS4G with a cheap ebay bluetooth adapter with no hassle. That adapter had no batteries at all, it was powered through the ALDL port on the car. I couldn't imagine needing power since no scanner I know of needs power at the ALDL port, it pulls it from the port itself. I would bet it is USB driver problems, or problems reading the USB adapter through Jellybean because of this new MTP protocol that sucks
Good to know.
Should I try a HoneyComb ROM? I guess it COULD be the OTG cable I got from amazon. Maybe it's not plugging in all the way.
thx
DizturbedOne said:
Torque Pro worked fine with my NS4G with a cheap ebay bluetooth adapter with no hassle. That adapter had no batteries at all, it was powered through the ALDL port on the car. I couldn't imagine needing power since no scanner I know of needs power at the ALDL port, it pulls it from the port itself. I would bet it is USB driver problems, or problems reading the USB adapter through Jellybean because of this new MTP protocol that sucks
Click to expand...
Click to collapse
shelbydz said:
Good to know.
Should I try a HoneyComb ROM? I guess it COULD be the OTG cable I got from amazon. Maybe it's not plugging in all the way.
thx
Click to expand...
Click to collapse
No Honeycomb roms for Nexus S...
I highly suggest a OBDII bluetooth adapter. They're 15$ on the net and will spare you the trouble. Make sure you find one that has good reviews, some cheap ones have problem connecting to some cars because of broken J1850 PWM (i think it's PWM, might be VPW) protocol.
Does anyone have an idea whether its possible to use MHL + OTG with charging on the Skyrocket? Whether it be stock or an aftermarket rom/kernel doesn't matter. I can't seem to find a definitive answer on this phone, but I'm leaning toward not possible.
This is what I planned on ordering. http://www.amazon.com/gp/product/B009LAZG2M/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I would assume since the MHL adapter puts the device in charge mode, it wouldn't read the attached usb device (if using a hub or y adapter) since it is not in Host mode. Any have any experiance with this or have any links they can provide. It would be much appreciated!
kennyry said:
Does anyone have an idea whether its possible to use MHL + OTG with charging on the Skyrocket? Whether it be stock or an aftermarket rom/kernel doesn't matter. I can't seem to find a definitive answer on this phone, but I'm leaning toward not possible.
This is what I planned on ordering. http://www.amazon.com/gp/product/B009LAZG2M/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I would assume since the MHL adapter puts the device in charge mode, it wouldn't read the attached usb device (if using a hub or y adapter) since it is not in Host mode. Any have any experiance with this or have any links they can provide. It would be much appreciated!
Click to expand...
Click to collapse
I have the same cable and mhl works as long add the rom supports it. As for your question I found this http://forum.xda-developers.com/showthread.php?t=1741583&page=21 and on the last page there is a link for someone who got it to work on as3 however our phones have different pin configuration but you should be able to do the same thing as him
OTG while using MHL sounds like a great way to fry something important on your phone. it's clear the note 2 had something like this in mind with the smart dock. it looks like the smart dock works with the S3 so it could be that the way they designed the usb port it all just works as needed for this.
I'm interested in the usecase/motivation for doing both at the same time if you don't mind sharing.
lart2150 said:
OTG while using MHL sounds like a great way to fry something important on your phone. it's clear the note 2 had something like this in mind with the smart dock. it looks like the smart dock works with the S3 so it could be that the way they designed the usb port it all just works as needed for this.
I'm interested in the usecase/motivation for doing both at the same time if you don't mind sharing.
Click to expand...
Click to collapse
Well my Skyrocket screen was destroyed by my youngest son So, I had an idea to use the old phone with the MHL adapter to connect to my TV (which is not a smart TV). The need for the OTG is to plug in peripherals such as kb/mouse, but after further review, i could probably just use bluetooth. The device itself doesn't need to have much storage really, all of the movies are being streamed from my mini home server (DLNA).
So instead of going out and spending 60 on a smart TV adapater, I figured I would try to make use of what I already had, a phone with a broken screen. I'm not even sure the digitizer works and I was unable to find a replacement screen a decent price. The phone has already been replaced with a Nexus 4, so I'm not really concerned with the "safety" of the skyrocket.
I think it would be nice to use it as a TV adapter, surf net, play games watch movies while in bed using a wireless mouse/keyboard.
You would think there would already be something like this out there...
I came across this, then noticed their statement "Use Bluetooth keyboard for wireless control" Which really tells me no OTG... and heard was broken ha.
http://www.amazon.com/iBolt-Streamer-MHL-Charging-Dock/dp/tech-data/B0094M3DZY/ref=de_a_smtd