I searched the threads on this but can't find specifically what I'm looking for.
I purchased the Z Pad dock for my G Tab and just got it in and hooked it up. It will charge through it and the USB works, haven't tested the RJ-45 connection but I connected it to my TV and it will not display anything. My TV has a DVI connector and I have a HDMI to DVI adapter and I know the adapter works because it works with other devices.
Also, HDMI and DVI video are exactly the same digitally as far as signal go so my question is, has anyone else used an adapter to connect it to the DVI port and if so did it work or not?
Just wondering if it needs to be specifically connected to a HDMI port to receive other feedback from the port to the device to turn it on. My Droid X will connect with this method.
Also, When I got the dock it had a rattle, so I cracked it open and the counter weight was loose as the mounting tabs were busted off. It was banging on the ribbon cable to the dock connector. I disassembled it and examined the cable and saw no damage and since all of the other features work I figured it might be the connection method but want to make sure. I secured the weight and closed it back up.
I also ordered a HDMI to composite RCA converter but haven't received it yet as I want to be able to connect it to any available display so I am not able to try that yet.
In short, has anyone else tried to connect it using a HDMI to DVI connector and not have display output? P.S. I did have the charger connected to power the internal dock board as it is not just a passthrough.
Just want to know before I attempt to send this back as a defect or hunt down other methods of connectivity.
Thanks in advance,
Brian
I have found that the hdmi out wont work unless the power supply is connected! so basically make sure the tablet is charging when you want the HDMI to work! Hope this helps!
Yes, I know that and said I had it plugged in. Thanks. Just wondering if someone else had trouble using a HDMI to DVI connector with the G Tab.
Brian Oshman said:
Yes, I know that and said I had it plugged in. Thanks. Just wondering if someone else had trouble using a HDMI to DVI connector with the G Tab.
Click to expand...
Click to collapse
Brian, Not sure how much it helps but I have a Ztab and it is working fine going HDMI --> HDMI on my TV. Are you having problems with a HDMI --> DVI connector? If you haven't already tried it, you could try rebooting the tablet with it in the dock. I've found that helps with mine sometimes.
Sent from my VEGAn-TAB-v1.0.0b5.1.1 using Tapatalk
well Brian I can tell you that Hdmi to dvi Works well.
I have the same dock, and i use it at work all the time via dvi adapter.
I assume your dock still works not using the adapter?
I plugged mine into my TV and it showed right up, but of course, I am using HDMI to HDMI. The only thing I can think of that might be a problem is you'd lose sound in the process, unless its smart enough to know the sound isn't connected via HDMI and keeps it coming out the speakers.
I did try to reboot it and it did not show up. Thanks for posting that it did work with the DVI adapter as that is how I have it set up. I know the adapter works as I use it with my Droid X and it works with that.
I will play around with it some more and wait until the coposite converter I ordered comes in as that is HDMI in to Composite out and see if that works. If not then I will send it back as a defect. I bet the counter wieght being broken loose inside did something to the ribbon cable.
Anyone use a HDMI to composit/RCA hookup yet? Mine is on order and am hoping I can use it on my older 4:3 40 inch Hitachi.
Mrwoodchuck said:
well Brian I can tell you that Hdmi to dvi Works well.
I have the same dock, and i use it at work all the time via dvi adapter.
I assume your dock still works not using the adapter?
Click to expand...
Click to collapse
Do you use it to display text? I find the quality from my Zpad, using the dock, to be pretty average for text. Did you change any settings?
Cheers, Mal.
I've bought a Digitazz MHL To HDMI Adapter, but no mater which ROM I try, no matter whether I try to connect my Sensation to my laptop or my TV......nothing happens.
I don't get any notification on the phone, nothing on the TV...arghhh, the frustration.
I know the HDMI cable i'm using is fine, as links up to my freeview box ok, blu-ray player ok and my TV.
Phone is plugged in and show as charging when my phone is linked up to TV.....tried retarting phone, different Sense 3.6 Roms etc..nothing is working.
Am I not doing something, or it it prob just a case of cheap rubbish MHL to HDMI adapter I bought?
Just HTC versions of the adapter work?
any Ideas...be very much appreciated as i've tried everything.
cheers
Matt
Attached pics of the MHL to HDMI I'm using.
I used 2 types of non htc adapters, both worked.
What power supply did you connect to the adapter? I think only 1a 5v will work for mhl..
Sent from my HTC Sensation using xda premium
In some roms HDMI will not work. Look in change log it will tell you if it's working or not. Usually its written in BUGS section. Check your current Rom to see if it's supported . If I remember correctly most don't work but you need to check and see if that could be the issue.
Sent from my HTC Sensation 4G using xda premium
realsis said:
In some roms HDMI will not work. Look in change log it will tell you if it's working or not. Usually its written in BUGS section. Check your current Rom to see if it's supported . If I remember correctly most don't work but you need to check and see if that could be the issue.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
MHL works on all the largely adopted roms, elegancia, ARHD etc.
Also, it's more a kernel thing than a rom actually.
The OP mentioned a couple of roms were tested. perhaps it would benefit the test to add stock as well just in case?
Sent from my HTC Sensation using xda premium
I'm also struggling with MHL on my Sensation. After searching the internet, the few tips I picked up that worked for others are:
1. You need to plug in power via the extra micro-USB port on the MHL adapter. Some have said that it needs a high-current power source (1A) which the HTC charger produces. 3rd party USB chargers sometimes output a lower current which some people find causes their MHL not to work. Also, using MHL seems to drain battery pretty quick and you need a high-amp power source to keep the phone charged or prevent it from draining too quickly.
2. If it is the first time using MHL, try plugging in the MHL(USB) to the phone then rebooting the phone. This is supposed to make your phone recognize and "activate" the MHL/HDMI capability(?).
3. I also read about playing around with TV settings. For one user with a Sony Bravia TV, he had to go to the tv settings -> external inputs -> HDMI and turn off HDMI device control or something.
4. Not all Sensation ROMs support MHL, for example CyanogenMod.
In my case, I bought a 3rd party MHL adapter and it didn't work the first time even with power connected to MHL. Then after (2) above, I finally saw the HDMI logo appear on the notification bar and it worked pretty well in my first 10mins of experimenting...nice picture with sound too. Then I tried playing another video and this time there was no sound from the TV. So I unplugged and reconnected the MHL connector from my phone and ever since then I have not been able to get MHL to work I'm using ARHD 3.6.1 ROM so I'm not sure if that is the problem. Still looking for solutions...
You might want to make sure that your TV actually supports MHL as not all do. I can't see how a laptop would support it, most don't even have a HDMI input?
The most trouble I've ever had with MHL is the sound sometimes doesn't work, but just unplugging then replugging the phone cures this.
BMamba550 said:
....
In my case, I bought a 3rd party MHL adapter and it didn't work the first time even with power connected to MHL. Then after (2) above, I finally saw the HDMI logo appear on the notification bar and it worked pretty well in my first 10mins of experimenting...nice picture with sound too. Then I tried playing another video and this time there was no sound from the TV. So I unplugged and reconnected the MHL connector from my phone and ever since then I have not been able to get MHL to work I'm using ARHD 3.6.1 ROM so I'm not sure if that is the problem. Still looking for solutions...
Click to expand...
Click to collapse
I finally managed to solve my MHL problem by flashing ARHD 3.6.8 ROM...so in my case it seemed to be the ROM version that didn't work well with MHL. It mirrors my phone screen pretty well although Sensation resolution is quarter-HD so on my HD TV the picture is less sharp, but acceptable.
boomboomer said:
You might want to make sure that your TV actually supports MHL as not all do. I can't see how a laptop would support it, most don't even have a HDMI input?
The most trouble I've ever had with MHL is the sound sometimes doesn't work, but just unplugging then replugging the phone cures this.
Click to expand...
Click to collapse
I have this same problem, my adapter works and shows on my phone that it connected but my TV does not support MHL as only certain TV's actually support this standard, and oh plus that fact that my current ROM doesnt support it
My Laptop has a HDMI connection and so does my HD TV....but didn't know the TV had to support MHL....I just thought it was a case of if it's a HD TV, with HDMI connections, then it would work?
Hmmm....I'm not getting ANYTHING in my notification area on my phone either though.
Gonna try some of these suggestions and will report back.
Ps: As far as Chargers and power sources etc...all mine are HTC Genuine ones.
Thanks for help guys....will be back soon, coz i'm off to experiment..hehe:laugh:
Matt
matthew33 said:
My Laptop has a HDMI connection and so does my HD TV....but didn't know the TV had to support MHL....I just thought it was a case of if it's a HD TV, with HDMI connections, then it would work?
Hmmm....I'm not getting ANYTHING in my notification area on my phone either though.
Gonna try some of these suggestions and will report back.
Ps: As far as Chargers and power sources etc...all mine are HTC Genuine ones.
Thanks for help guys....will be back soon, coz i'm off to experiment..hehe:laugh:
Matt
Click to expand...
Click to collapse
Hope all goes well in your test's, My process was to power up the adapter first using my genuine htc charger first then plus in the HDMI cable from the adapter to the TV then plug the adapter into the phone last. If it does not show up on the phone notification bar to begin with restart your phone with it all still plugged in failing all of that then time for a new ROM and kernel probably Good luck
hoaxy32 said:
Hope all goes well in your test's, My process was to power up the adapter first using my genuine htc charger first then plus in the HDMI cable from the adapter to the TV then plug the adapter into the phone last. If it does not show up on the phone notification bar to begin with restart your phone with it all still plugged in failing all of that then time for a new ROM and kernel probably Good luck
Click to expand...
Click to collapse
Cheers for reply, but tried differerent Roms and kernels...nothing happening.
I give up.
Matt
I've got a similar problem where not matter what ICS ROM or kernel I used it wouldn't work.
(see http://forum.xda-developers.com/showpost.php?p=31797423&postcount=17)
However, in my case, it works fine with GB connected to a Sharp TV, but for some reason not ICS!
It also works fine with ICS connected to other TVs (tested on Samsung and LG) and on a PC monitor (through HDMI to DVI cable).
Just not with the Sharp TV!
Very frustrating!
hey guys, i have been trying to get this to work but all to no avail have tried the suggestions, all of the kernels i can find ect but i am just not having any luck. i am also not having any joy with usb-otg. could the 2 be linked?
Just a couple of thoughts. I've only skimmed the thread so I apologise if I'm repeating something mentioned earlier.
I can confirm that NRG's current EnergyROM which features a stock kernel and Sense 3.6 works with MHL (at the moment MHL doesn't work on any Sense 4 ROMs as far as I'm aware).
Also, I recently visited my folks and tried to show off some photos on their TV. For some reason MHL would only work on ONE of its four HDMI ports. I didn't have the time to figure out why, but there you go. Maybe those having difficulties could visit a tv shop and try plugging their phone into a variety of tvs for troubleshooting purposes.
Other things to note: On some TVs my MHL connection works at 720p and 60hz (which is good). On others it runs at 1080i at 24hz which makes for a crappy experience (jerky).
ICS ROMs have greatly improved performance when using MHL so steer clear of gingerbread.
MIUI ROMs should also support MHL (I've tried a couple).
Finally, I sometimes use a battery pack that I bought via Amazon to power the MHL connection when I'm out and about. If you decide to experiment this way, make sure you buy an external battery that has a 1 amp output per USB port.
I'm typing this with a bluetooth keyboard while my phone is connected to my tv, so it can work : ) I bought this MHL adapter: http://www.amazon.co.uk/FoneM8-MHL-Cable-microUSB-HDMI/dp/B0060Z8CYK
---------- Post added at 12:09 AM ---------- Previous post was at 12:03 AM ----------
heavy_metal_man said:
hey guys, i have been trying to get this to work but all to no avail have tried the suggestions, all of the kernels i can find ect but i am just not having any luck. i am also not having any joy with usb-otg. could the 2 be linked?
Click to expand...
Click to collapse
I've only tried USB on the go once, using a dedicated USB on the go cable for a Galaxy SII and a small externally powered four port hub in conjunction with Sebsatian FM's kernel and the most recent EnergyROM. I was able to browse a flash drive and connect a wireless keyboard and mouse. I couldn't really see the point as you can't use MHL at the same time, and you have to provide external power (unlike, for example, the Galaxy Note which will allow you to plug flash drives etc into the adapter without external power).
Ouzo said:
Just a couple of thoughts. I've only skimmed the thread so I apologise if I'm repeating something mentioned earlier.
I can confirm that NRG's current EnergyROM which features a stock kernel and Sense 3.6 works with MHL (at the moment MHL doesn't work on any Sense 4 ROMs as far as I'm aware).
Also, I recently visited my folks and tried to show off some photos on their TV. For some reason MHL would only work on ONE of its four HDMI ports. I didn't have the time to figure out why, but there you go. Maybe those having difficulties could visit a tv shop and try plugging their phone into a variety of tvs for troubleshooting purposes.
Other things to note: On some TVs my MHL connection works at 720p and 60hz (which is good). On others it runs at 1080i at 24hz which makes for a crappy experience (jerky).
ICS ROMs have greatly improved performance when using MHL so steer clear of gingerbread.
MIUI ROMs should also support MHL (I've tried a couple).
Finally, I sometimes use a battery pack that I bought via Amazon to power the MHL connection when I'm out and about. If you decide to experiment this way, make sure you buy an external battery that has a 1 amp output per USB port.
I'm typing this with a bluetooth keyboard while my phone is connected to my tv, so it can work : ) I bought this MHL adapter: http://www.amazon.co.uk/FoneM8-MHL-Cable-microUSB-HDMI/dp/B0060Z8CYK
---------- Post added at 12:09 AM ---------- Previous post was at 12:03 AM ----------
I've only tried USB on the go once, using a dedicated USB on the go cable for a Galaxy SII and a small externally powered four port hub in conjunction with Sebsatian FM's kernel and the most recent EnergyROM. I was able to browse a flash drive and connect a wireless keyboard and mouse. I couldn't really see the point as you can't use MHL at the same time, and you have to provide external power (unlike, for example, the Galaxy Note which will allow you to plug flash drives etc into the adapter without external power).
Click to expand...
Click to collapse
thank you for your chip in pal but i am still having no joy, jumped straight to the latest energy rom, installed and hooked up but no joy. i have tried both ports, rebooting with the cable in, different power sources. nothing. im beginning to think its gonna be my phone i will test this out when i get into work, as we have a hd tv there as well (allowing i get the time ) but im starting to lose hope would be so epic to be able to put my emulators onto the big screen and have goldeneye mulitlpayer matches at lunch in work
heavy_metal_man said:
thank you for your chip in pal but i am still having no joy, jumped straight to the latest energy rom, installed and hooked up but no joy. i have tried both ports, rebooting with the cable in, different power sources. nothing. im beginning to think its gonna be my phone i will test this out when i get into work, as we have a hd tv there as well (allowing i get the time ) but im starting to lose hope would be so epic to be able to put my emulators onto the big screen and have goldeneye mulitlpayer matches at lunch in work
Click to expand...
Click to collapse
That's weird. Got any mates with MHL enabled phones you can try your adapter on? I hate problems like this, they drive you mad and you end up doubting pretty much everything you've tried. Seriously though, you do realise MHL only works on the third Thursday of the month and if you wear underpants on your head, yeah? Oh, and stand on one leg ; ) Good luck.
Other than trying that different tv at work and possibly a different HDMI cable and MHL adapter, I'm not sure what else to suggest.
Ouzo said:
That's weird. Got any mates with MHL enabled phones you can try your adapter on? I hate problems like this, they drive you mad and you end up doubting pretty much everything you've tried. Seriously though, you do realise MHL only works on the third Thursday of the month and if you wear underpants on your head, yeah? Oh, and stand on one leg ; ) Good luck.
Other than trying that different tv at work and possibly a different HDMI cable and MHL adapter, I'm not sure what else to suggest.
Click to expand...
Click to collapse
its definately beginning to feel like that. my friend in work has an gs2, which i believe is mhl enabled. so tomorrow when i get into work i will try steal hm and the hdtv in work and see if i can get anywhere. at this point its either my £230 hdtv ()
my £360 phone () or my ****ty as mhl adapter from ebay /)
i guess we shall see tomorrow :/ will be gutted if its the phone. just out of interest has anyone got this going on the XE version of the sensation? as this is what i have.
still, thanks for your input bruce said that he is going to look into fixing the mhl on his CMX nightly, so if we can get this going i will be in emulator heaven
(off topic but XDA just censored me =0 automatically =O)
heavy_metal_man said:
its definately beginning to feel like that. my friend in work has an gs2, which i believe is mhl enabled. so tomorrow when i get into work i will try steal hm and the hdtv in work and see if i can get anywhere. at this point its either my £230 hdtv ()
my £360 phone () or my ****ty as mhl adapter from ebay /)
i guess we shall see tomorrow :/ will be gutted if its the phone. just out of interest has anyone got this going on the XE version of the sensation? as this is what i have.
still, thanks for your input bruce said that he is going to look into fixing the mhl on his CMX nightly, so if we can get this going i will be in emulator heaven
(off topic but XDA just censored me =0 automatically =O)
Click to expand...
Click to collapse
The SII is definitely MHL enabled (well on the stock ROM at any rate) - I hope it doesn't work so at least then it's hopefully just a £10 mhl adapter and not the phone or tv ; )
Ouzo said:
The SII is definitely MHL enabled (well on the stock ROM at any rate) - I hope it doesn't work so at least then it's hopefully just a £10 mhl adapter and not the phone or tv ; )
Click to expand...
Click to collapse
OK so apparently plugging my phone in at work counts as theft of electricity and I can get sacked for it
So I may take longer to find a HDTV and another test device :banghead:
Sent from my HTC Sensation using xda premium
heavy_metal_man said:
OK so apparently plugging my phone in at work counts as theft of electricity and I can get sacked for it
So I may take longer to find a HDTV and another test device :banghead:
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
LOL, you must work for the NHS or local government or something. Still, you made my girlfriend and I laugh : ) Maybe try a Currys or a Richer Sounds or something. There's bound to be someone in there with a decent smartphone, and there will be plenty of TVs to try too! If they haven't got a clue what you're on about, you might just educate them a bit ; )
Alright, I have searched and searched for a solution to this issue.
What started this all off is that I purchased a Pioneer AppRadio 2 that I wanted to connect my Verizon Galaxy S3 too. I plugged everything in correctly got a connection from the appradio app and with a nice crystal clear display. Then in 7 seconds it all went down hill from there. So after a lot of troubleshooting here is essentially what it does. Once plugged in after a few seconds the display comes up and if I have music going it starts playing, then in 7(est) seconds I lose signal dor a second and then it comes back for another 7 seconds, etc... I have tested a ton of things and still get the same results...
Devices: AppRadio2, Yamaha Reciever (This decodes HDMI before sending it on) and a Samsung DLP Television
HDMI Cables: Generic HDMI, High end Monoprice and a Mid Level Monoprice HDMI
USB: 3 different cables
Power Adapters: Car 1.0A and 2,0A; Home: 1.0A Verzon power adapter and attached to PC
Phones: I replaced my Galaxy S3 with another thinking it was the phone itself (Verizon warranty)
MHL Adapter: I purchased two Samsung MHL GS3 MHL adapters from amazon (two different vendors), EPL-3FHUBEG, (I had links in here but the damn forum won't let me leave em in).
I have been on the phone with Samsung for hours and verizon. The Samsung tier 2 support tech has opened a ticket with research or something and am currently waiting to be contacted in some way.
Has anyone else experienced similar? Any solutions?
Thank You...
At this point I can only charge my Samsung galaxy s3 with pieonerr android cable that I had installed at BestBuy they also installed my appradio 2. Not exactly sure what to do next
Sent from my LG-V909 using Tapatalk 2
First off to really get the most out of the unit got should arlibitator in the play store it will blow your mind.
That being said there has been a lot of talk on the forums that the mhl adapter sold on amazon are in fact fakes. I can confirm this add I purchased one from amazon abs after having issues with 4g cutting out I got one directly from Samsung, that don't even feel the same. So your charging problem could be from using a bad mhl.
On a side note the pioneer charger only puts out about 500ma which isn't enough to charge the battery normally. Most ppl installed a 3.1v charger from amazon.
Charging works but everything else dont. Head unit dosent see phone when plugged in. Want to order the parts I need asap. Not sure what to order
Sent from my LG-V909 using Tapatalk 2
I have been researching this issue for a while, but I have never found someone that posted a resolution, so I figured I would just ask it on my own. I have the galaxy s4 with a MHL adapter to hook up to TV in my car. It's great for streaming Netflix, Hulu, Sunday Ticket, etc. However, the charging on the MHL cannot keep up with the phone, even when I am not using video. I have read some people that believe it is because the phone recognizes the MHL as a USB charger instead of AC (which is what is detects when plugged directly into my car adapter) so limits the input to 500mah. I have not been able to find an app that works on the s4 to measure charge input though, so I cannot determine what exactly it is charging as.
So, has anyone been able to use their phone in MHL while maintaining the battery level so it does not die 30 minutes in? The only thing I can think of is upgrading to a MHL 2.0, which apparently has better charging, so I ordered one of those..I am not too optimistic about it though.
Thanks for all tips and suggestions!
Hi guys i purchased a hdmi to mhl adapter cable for my S4 i9505 (i have attached image, intented for S4) which is rooted running on stock rom 4.2.2 JB.
It is not working with my s4, i have noticed that the mhl port does not insert fully into my s4, and goes in about 3/4, is this normal?
I have tried restarting phone and tv, connected to power source correctly etc. Are there any other considerations?
On a side note, i tried this cable on my Note 10.1 2014 tablet and it inserts fully in, i get the "hdmi connected" message and it works flawlessly. However its not working on my S4.
If anyone has any suggestions or solutions, please let me know. Thanks.
Sent from my GT-I9505 using xda premium
kuljit55 said:
Hi guys i purchased a hdmi to mhl adapter cable for my S4 i9505 (i have attached image, intented for S4) which is rooted running on stock rom 4.2.2 JB.
It is not working with my s4, i have noticed that the mhl port does not insert fully into my s4, and goes in about 3/4, is this normal?
I have tried restarting phone and tv, connected to power source correctly etc. Are there any other considerations?
On a side note, i tried this cable on my Note 10.1 2014 tablet and it inserts fully in, i get the "hdmi connected" message and it works flawlessly. However its not working on my S4.
If anyone has any suggestions or solutions, please let me know. Thanks.
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
Maybe needs power adapter connected to the phone. I know the Genuine Hdtv Hdmi adapter works with the S4 without requiring power connected. Also Its Mhl 2.0, not sure what ur cable is ? 2.0 or 1.0?
It is connected to power source, the issue is its not inserting fully into my s4. I tried it on a mates S3lte today and it worked and went in fully and worked.
What could be the issue? Any suggestions?
P.s. im not sure if its mhl 1.0 or 2.0 but the cable was advertised to work with s4.
Sent from my GT-I9505 using xda premium
When I got my Genuine Samsung MHL adapter, I couldn't get it to work at first either. Same problem, the connector looked much longer than regular micro-USB, and I found it strange that it stuck out so much. In the end, I figured that there was a reason that the MHL connector is longer, and I pushed it in slightly harder, and it finally snapped in properly, and my S4 told me that the adapter was detected. It does take more effort than a regular micro-usb cable to connect properly, so try using just slightly more pressure than normal, until it pops in all the way, or at least until the device is detected. If veins are popping out of your forehead, then you're pushing way too hard, and something else is wrong.
g0pher666 said:
When I got my Genuine Samsung MHL adapter, I couldn't get it to work at first either. Same problem, the connector looked much longer than regular micro-USB, and I found it strange that it stuck out so much. In the end, I figured that there was a reason that the MHL connector is longer, and I pushed it in slightly harder, and it finally snapped in properly, and my S4 told me that the adapter was detected. It does take more effort than a regular micro-usb cable to connect properly, so try using just slightly more pressure than normal, until it pops in all the way, or at least until the device is detected. If veins are popping out of your forehead, then you're pushing way too hard, and something else is wrong.
Click to expand...
Click to collapse
I tried to put alot of pressure but it did not go in. Werid thing is, i tried the mhl adapter cable with another friends S4 and even on that, it didnt go in and gave the same issue.
Now im wondering if Samsung possibily made some early batches of the S4 that take the 5pin connector? And that being the reason why it does not insert properly into two handsets i have tried on. Any ideas or suggestions people? Thanks
Sent from my GT-I9505 using xda premium