[Q] SIPdroid and Captivate - Captivate General

hey all,
i have a Captivate with no SIM card (only WIFI connectivity). i downloaded SIPdroid from the market and created a PBXes.com account.
i manually created an extension and trunk and configured inbound and outbound routing to access my iptel.org account. the iptel.org account makes use of my google voice number.
i get a green connection light for SIPdroid but when i place a call i only get echo on the line and a perpetual SIPdroid dialing screen. no ringtone, no answer, no ring on the other side.
any help with troubleshooting is much appreciated as im bummed out and all out of ideas right now. amidoingitrite in terms of sipdroid>pbxes>iptel>voice? thanks.

I believe you have to use the browser to initiate the call or an app such as Google Voice Callback.
Do you have your google voice number setup to forward to your sip number?

Related

Google Voice "Spoof" Caller ID?

Got a question...
I have recently been upgraded to Google Voice, and was wondering if there was a way I could basically "spoof" all outgoing caller IDs so it appeared as my Google Voice number. The reason for doing this is if I switch to Google Voice, my calls will still show as coming from my old number.
If this isnt possible, anyone have any other ways around this?
EDIT: I should note... I do have a PPC6800/HTC MOGUL, so I have access to all the EPST settings and whatnot.
bump please....
You can but you have to call your google voice number to initiate the outgoing call instead of dialing out directly.

Problems with Nimbizz and Google Voice for free calls

Greetings, I am a newbie who recently got the X10 mini which I love, but I have had days of troubles trying to get Nimbizz and Google Voice configured to make free calls. An awesome developer named "fishsticksfromguam" made this program called "Advanced GV Caller" which I purchased, and could not get to work. I followed all of his helpful instructions, but it still will not work properly. Is anyone else having these problems or can anyone give advice?
The errors I get are:
With A.GV Dialer: it says GV is calling my phone and either the phone call just doesn't go through, or it says that my GV number is not set for callbacks. Since GV does not have a callback number, I don't get it.
Nimbizz: either goes black and freezes and I have to restart my phone, or it says, Nimbizz is not responding, force quit?
Then when I sign back in, it shows that my Skype account under Nimbizz is offline, whereas just a minute before it was online and I was able to make calls.
Or it says, Activity Phone (in process.com.android.phone) is not responding, force close.
My Gizmo5 account is set up properly and my Google Voice phone number has been verified by the developer himself. I sincerely recommend fishsticksfromguam's programs as he goes out of his way to help.
Below are the instructions that I have followed:
1. Login in Gizmo5 and under the "FORWARDING" tab, select the option
"Forward All Calls", and enter your gtalk email address, hit save and log out.
2. On my Desktop computer, I start the official Google Talk client.
3. Login to Google Voice and under Settings menu, I added a new Phone
with my Gizmo5 telephone number and I selected "GIZMO" as the phone
type.
4. Google will now attempt to call your Gizmo5 number to verify it.
Since you've forwarded ALL Gizmo5 calls to your gTalk, it will come in
on your Google Talk Client where you can now answer the call and verify it!
*** YOU HAVE NOW VERIFIED YOUR GIZMO5 NUMBER ***
5. Install Nimbuzz (or Fring) on your Android phone, and ensure your
Google Talk is set up properly to receive voice calls.
6. Install Google Voice Call Advanced, enter your Google Voice
Username & Password, and for the Callback number, enter your full
Gizmo5 callback number (ie. 17475551212), and select "GIZMO5" as the
phone type. Select "Use GV for all calls". Hit Apply.
*** You should now be able to make FREE phone calls using your Android Phone ***
Any advice please?
I don't have any experience with nimbuzz but I can give you my two cents on Google voice. Some apps worked some of the time but in the end for making gv calls the only stable option is through the browser. Now I just have a bookmark saved on my homescreen and it opens to my contact list in gv. Incoming calls obviously need nothing special. Hope this helps
Sent from my X10a using XDA App

Google Voice over Wifi

I recently jumped from a Captivate to an Epic 4g, of course that means AT&T to Sprint, but I didn't want to sell my Captivate I love it so...
I decided it was time to manufacture an @home landline. A couple hours of fiddling have resulted in my ability to use Google Voice for free inbound and outbound on a phone with no cell service, all just over wifi. I didn't know where to stick this... so here it is.
I found this method a little bit easier than using PBXes.org as honestly I didn't find an updated guide to setting up such a thing, and I wasn't following those guides very well anyways, but wanted a project that I could grind out in an evening.
Have an Android phone without current cell service? Or just have a geek gnawing on your insides? Follow along.
Step 1, Install Google Voice, Google Voice Call Back, and Sipdroid on your Android phone, reset the phone.
Step 2, Sign up at sip2sip.info for a SIP number.
Step 3 Register that sip info (found in your email now) at www.ipkall.com, also enter that same info into your Sipdroid app in the sip account settings on said phone.
Mandatory! Test call the number ipkall assigned you from another phone, your SipDroid should ring, answer it and verify. This way if the number is not valid in Google Voice, ipkall will assign you a new number the next time you signup. If you don't test call, you will get assigned the same number, over and over.
Step 4 (possible tedium) Find a number available from ipkall that isn't already sitting registered but expired in Google Voice, this may require registering and deleting your account at IPKall multiple times to get a valid number for use at Google Voice.
Note: Ipkall gives you only Washington state numbers, I recommend the (206) area codes as I tried 12 of the (425) area codes all of which failed as they had previously been registered in Google Voice. Don't worry about what state this number is in, this number is just a go-between, you will in the end be using your Google Voice number.
Step 5 Register the inbound only washington state number ipkall assigns (the one you found that works) into google voice so that it is your forwarding number.
Test call Google Voice number, your SipDroid should ring.
Step 6 Make sure Google Voice app is used for all outbound calls on your phone, I can't guarantee this is needed, but theres no point in not having this assigned as the phone is otherwise dead to the world.
Step 7 Make sure that Google Voice Call Back is intercepting all calls.
Outbound test call... call someone who cares.
The way Call Back works in this fun little project is GVCB will intercept all calls made, call you back from your google voice number... which in turn is forwarding to your ipkall number which is forwarding to your SIP number which will cause SIPdroid to ring your phone, then when you answer the "call back," it will immediately ring the number you dialed. All free, but perhaps a bit tedious for the average phone user. This circumvents the need for a mobile number associated with the phone being used.
Awesome! this is what I need! Pbxes doesn't seem to want to let me register, and I have almost zero signal at my new place. So, I got to step 3, tried calling the number and i get a recording telling me that my call can't be completed due to network error, error #101. Not sure what that means...
edit-nevermind, bad setup. Now I've got it to ring sipdroid, but I can't hear anything. Trying to verify the number with GV, but this lack of audio is troubling.
did you reboot the phone after getting sipdroid installed?
Also try playing around with the audio codecs, limiting it to a couple at a time to see which will work. I had the same problem at first but after one of these things the audio came in clear as a bell and havent had a problem since.
sevenvt said:
did you reboot the phone after getting sipdroid installed?
Also try playing around with the audio codecs, limiting it to a couple at a time to see which will work. I had the same problem at first but after one of these things the audio came in clear as a bell and havent had a problem since.
Click to expand...
Click to collapse
alright, i'll try rebooting and different codecs. Only problem now is that I don't have a second phone to test it with, so i'll be waiting until Monday to use the work phone.
thanks! great thread
Yes, the 2nd phone makes this process easier, otherwise you can't complete the test calls to the ipkall phone number, and you also can't test any changes or audio. I popped half a headset each on either side of my head one plugged into each phone and tested my setup that way, muting either phone and making sure audio was getting through to the opposite ear.
Edit: I also found that if i was testing the phone side by side with the phone used to call it, I had to practically yell to get my voice to register on my sipdroid. After muting the other phone, sound worked perfectly.
I am having trouble getting my Sipdroid to dial out. I have not had any issues with receiving calls either through the IPKall issued number, or through Google Voice redirected to the IPKall number.
Whenever I try to dial out using either IPKall or Google Voice it attempts to make the call and immediately ends.
Nevermind, I now realize the need/use of Google Voice Callback. Everything seems to be working just dandy now. Thanks!
Well, tried all of the different codecs, some don't allow the call to connect, but in the end, none of them allowed me to have audio either incoming or outgoing, so I guess this isn't going to work for me....can anyone that has this working, possibly with Cognition, give me their EXACT settings?
call options i have "sipdroid only"
audio video I have all gains to medium (no audio if i increase or decrease any of these)
I have pcma pcmu and bv16 codecs enabled over wlan only, others disabled.
Wifi is set to never sleep and sipdroid itself is not allowed control over power.
All other settings are stock.
Again, I noticed that if the one of the lines was not muted, my sipdroid didn't give me audio back, but would still feed my test line audio.
So I call my googlevoice, I pickup, I talk into sipdroid and hear my voice on the test phone, I talk into testphone (without sipdroid muted) and I get no audio. I mute sipdroid and talk into test phone and sipdroid picks it up just fine. Same in reverse muting.
sevenvt said:
call options i have "sipdroid only"
audio video I have all gains to medium (no audio if i increase or decrease any of these)
I have pcma pcmu and bv16 codecs enabled over wlan only, others disabled.
Wifi is set to never sleep and sipdroid itself is not allowed control over power.
All other settings are stock.
Again, I noticed that if the one of the lines was not muted, my sipdroid didn't give me audio back, but would still feed my test line audio.
So I call my googlevoice, I pickup, I talk into sipdroid and hear my voice on the test phone, I talk into testphone (without sipdroid muted) and I get no audio. I mute sipdroid and talk into test phone and sipdroid picks it up just fine. Same in reverse muting.
Click to expand...
Click to collapse
Thanks for the info! I tried your settings, still no audio. Really annoyed. Oh well.
Trying calling 3333 on SipDroid. That will connect to sip2sip's audio test. If you do not hear any audio then there is something wrong with your settings to sip2sip.
Shouko said:
Trying calling 3333 on SipDroid. That will connect to sip2sip's audio test. If you do not hear any audio then there is something wrong with your settings to sip2sip.
Click to expand...
Click to collapse
Tried, no audio. What should I have for settings? here's what's there now-
server - proxy.sipthor.net
Domain - sip2sip.info
username or caller ID - not entered
port - 5060
protocol - udp
and then I've only checked off "Use WLAN".
I've tried TCP for the protocol, but then the program never logs in, dot just stays yellow.
These are the same settings I have except of course with my username
One thing we haven't considered is your port handling on whatever router you have going on or firewalls.
Authorization Username
<sip2sip2 phone number>
Server or Proxy
proxy.sipthor.net
Domain
sip2sip.info
Port
5060
Protocol
UDP
Use WLAN
These were the settings I used for SipDroid. If it still does not work, you can try CSipSimple.
Shouko said:
Authorization Username
<sip2sip2 phone number>
Server or Proxy
proxy.sipthor.net
Domain
sip2sip.info
Port
5060
Protocol
UDP
Use WLAN
These were the settings I used for SipDroid. If it still does not work, you can try CSipSimple.
Click to expand...
Click to collapse
OK...so, CSsipsimple is nice, i like the interface more than Sipdroid, but it too lacks audio. Could this be a network problem? I've yet to try this on my home router, since I have no phone to test it with there. I guess I could test it over 3g?
edit- yep! 3g works...annoying. guess I can go ahead and set the rest up, and hope that I can get it to work at home. Called my GV number, Csipsimple rang, so it's routing correctly, I heard myself on both ends. Confused as to how GV call back works, and if I really need it.
ryboto said:
OK...so, CSsipsimple is nice, i like the interface more than Sipdroid, but it too lacks audio. Could this be a network problem? I've yet to try this on my home router, since I have no phone to test it with there. I guess I could test it over 3g?
Click to expand...
Click to collapse
If you are using a public or work wifi, most likely some ports will be blocked.
ryboto said:
edit- yep! 3g works...annoying. guess I can go ahead and set the rest up, and hope that I can get it to work at home. Called my GV number, Csipsimple rang, so it's routing correctly, I heard myself on both ends. Confused as to how GV call back works, and if I really need it.
Click to expand...
Click to collapse
IPKall only allows incoming calls. So you would need to use Google Voice Callback to make outgoing calls. GVCB uses Google Voice to call your IPKall number. Then when you pickup (free incoming), GV will connect you to the number you want to call. When you configure GVBC, you need to set your callback number to your IPKall number.
Shouko said:
If you are using a public or work wifi, most likely some ports will be blocked.
IPKall only allows incoming calls. So you would need to use Google Voice Callback to make outgoing calls. GVCB uses Google Voice to call your IPKall number. Then when you pickup (free incoming), GV will connect you to the number you want to call. When you configure GVBC, you need to set your callback number to your IPKall number.
Click to expand...
Click to collapse
Yea, I figured out how it worked, made some calls. There's a HUGE delay though, possibly around 1-1.5 seconds, and apparently my audio breaks up. I made some calls over wifi at home when this happened. Also, CSipsimple has trouble registering my SIP randomly, whereas Sipdroid always connects. I just need this to be a little more reliable. There's no way I can have a conversation with that much delay.
has anyone tried this over or virgin mobile? does this work over cell internet? because an optimus or intercept with this for $25 month with unlimited internet would be awesome. even better if you can get a modded epic or fascinate on virgin mobile. maybe the speeds would suck but it beats what i am paying right now.
even better, metro pcs has lte in my area (seriously, they beat verizon and att to that wtf?) and a phone that is like a galaxy s with a crappy screen and camera on it. still should be fast and cheap, just need a way to get around paying for talk minutes.

Trouble setting up SIP on native dialer

I have setup Google voice in my retired mesmerize. I used the whole Google voice process with sip droid and pbxes.org. I am at the point where I am setup with the sip account in the dialer. At this point I can receive incoming calls with no issues. My problem is that when I try to make outgoing calls the phone just stairs at me like I am stupid for a bit while it tries, and then it times out. What am I missing. I can give you other info if it is needed. Thanks
If it's broken...beat it into submission until it works!

[Q] Groove IP: Configuring incoming calls on wifi

I have installed Groove IP and Google Talk on my LG Optimus V. I am trying to figure out how to get incoming calls to a wifi device with no cell phone number. This is in preparation to moving to a tablet with just wifi. I was trying to play around with google voice and groove IP to see how thye worked before ditching my OV cell plan and moving to a tablet.
I have configured google voice so that google chat is checked in the settings. Outgoing calls via Groove IP work as advertised. However, calling my Google Voice number dumps the caller into the google voice mail, requesting the google voice pin.
I have double-checked my GV account and no other number is set as a forwarding number. The only thing checked is google chat and the google voice account is the same as that logged into for Groove IP.
How do I configure Groove IP and GV to allow incoming calls over wifi with no forwarding cell phone number (which would be the scenario I would have if I had this working on a tablet)?
Thanks!
Don't have a clue what happened, but got up this morning and incoming calls to my GV number come into my phone via Groove IP as advertised.
Sent from my LG-VM670 using Tapatalk 2

Categories

Resources