Can WP7 stream hi quality music via Bluetooth? - Windows Phone 7 Q&A, Help & Troubleshooting

With WP7 having Zune so heavily integrated, I would imagine that MS will have considered that some of us will want to play the music that we've downloaded with a Zune pass on some speakers, rather than headphones.
Clearly there are not going to be any speaker docks out there for WP7 phones as they're all slightly different shapes & sizes so what I want to do is get a bluetooth receiver to put into the aux input on my ipod speaker dock and stream music from my Omnia7 to the speaker dock using something like the Bluetooth wireless audio receiver from Belkin.
Is this possible? As the music downloaded with a Zune pass is DRM protected, I can't just copy it to my itunes/ipod etc so bluetooth would seem the best way.

I stream music from my HD7 to my Toyota's audio system via bluetooth, and it sounds absolutely fine to me.

Yes
adesonic said:
I stream music from my HD7 to my Toyota's audio system via bluetooth, and it sounds absolutely fine to me.
Click to expand...
Click to collapse
Hi all
I use a HTC 7 Mozart with a Jabra SP700 which connects with both the HandsFree profile and the High Quality Audio Profile (A2DP).
I get very good sound quality via the device over A2DP.
Cheers
andrew-in-woking

I have connected a Chordette Gem to my Hifi Rack and transfer music via Bluetooth from my WP7 (and Laptop etc)
High End D/A Converter inside (24bit and up to 196kHz), so you can expect audiophile sounds
http://www.chordelectronics.co.uk/products-info.asp?id=53

The other thing is that you don't want to have the phone volume all the way up... Correct me if I am wrong, but you want to let your amplifier doing the amplification - not your phone. I put my phone on 20/30 and it seems to make a difference in my Ford. It will also not force me to turn my system all the way up in my car.
Sent from my SGH-i917 using XDA Windows Phone 7 App

Related

Advice needed on Bluetooth music to Hi-Fi.

Hi,
I have a HTC Touch which I am currently using the Pocket Player software to stream my music from my PC which is located upstairs. I can connect the Touch to my Stereo amplifier through a USB/Jack cable and play the music through my Hifi speakers rather than headphones but I was wondering if it would be possible for me to transmit the audio to my amplifier by way of Bluetooth. It would cerntainly allow me the freedom of changing tracks on my phone sitting in my armchair rather than sat next to my amplifier through a cable. I.E Streaming music from my PC through Wi-FI, via my HTC Touch through bluetooth.
Hope this makes sense. Has anyone done it and is there a noticible difference in sound quality when sending music by bluetooth rather than a wired connection.
I have seen various Bluetooth type devices on ebay and amazon that claim to do this type of thing but as I have never tried Bluetooth I am a little sceptical and not sure exactly what is required. I assume that as my Touch can send Bluetooth beam I would only need a reciever to connect the Jack plug from my amp, is this correct? Or would it be better to buy a jack transmitter/receiver for the job.
I don't want to spend a whole lot of money doing this just to test so can anyone recomend a device.
Thanks in advance for any help.
hi there,
i use this device:
http://www.itechdynamic.com/en/products_spec.asp?cid=6&pid=06020 it's by itech and it's called bluecon35. the picture shows the black unit but i have the white one =) the 3.5mm jack is connected to the aux plug of my amplifier. my stereo system combined with the speakers are then also connected. from there, the bluecon is paired via bluetooth to my x7500. this gives me the luxury of changing track, albums, volume, etc. basically all the music is streamed to my amplifier via the bluecon. with regards to the quality, i would say it's quite good. i don't hear "noise" or static in the background...nor are there jumps or pauses in the connection. everything is just fine except that i'm using a much better set of speakers as compared to headphones.
disadvantages:
- if you listen to your sounds like for 8 hours, then you could have a problem. the battery life of bluecon is around and doesn't have an external power source that allows it to play even when paired. i read that itech is planning to come out with a new similar bt device but this time it's also plugged to the wall socket or a car charger. no idea when that will be
- a minor detail is that if you receive a call, an sms or your phone has an alarm for an event then these sounds are streamed into the amplifier as well.
cost? i got it from thailand and it was for 2000 baht....that's around 63 usd (based on a 32baht to dollar exchange rate).
hope that helps
I use a pinnacle soundbridge, which cost under £50, and it plugs into your hi-fi and streams music from your pc over your wireless network. It can be controlled using the ir remote control, or your pda can access it over wi-fi to control it. As well as streaming from you pc, you can also use it to listen to internet radio.
Thanks for the advice guys. Robson, the Bluetooth receiver is a possibility however after googling it I found a couple of bad reviews. Some people seem to have a problem connecting their devices to it and others have said it has trouble with streaming MP3's over 192kbps. I will look into this further.
Jez83uk, the Pinnacle Soundbridge looks like a really good idea. Is it differcult to set up with a PDA and will it connect to my PC through a wireless router.
Also were would you recomend picking one up for under £50.
Cheers for all the help!
Mine was £39.99 at ebuyer.com, but looking around a few websites they seem to be out of stock everywhere, google products. I recommend keeping an eye on ebay if you're interested in getting one. I have mine connected through a wireless router, and setup was extremely easy. You need to run a media server- I use firefly, but I believe that itunes or windows media player 11 can do the same thing. PDA control is just a case of installing two cab files for a package called visualmr. Hope this helps you.
belkin tunestage 1 here
...was originally only advertised as working with the supplied dongle for earlier ipods, which is how i used to use it, but i discovered it works great with A2DP too. should be v cheap on ebay...

music - bluetooth to stereo possible?

just as the title says, is it possible to send music via bt to my stereo just like when i make or recieve calls?
not that i'd use this as a sole way to listen to music in my car, but i just started wondering if it were possible, and if so, how?
It's possible, but you have to make sure that your Stereo has the bluetooth profile for A2DP. It's the same pairing process, but instead of only streaming call audio it will stream any other audio too.
Also, the stereo will have a headphone icon under bluetooth preferences.
Hope this helps.
I do that all the time in my car. The sound quality is not as good as hooking up a cable through th aux jack. The nav direction also come through my car stereo.
Ah yes, I forgot about A2DP being needed... That would make my situation impossible... I'll just have to get a 3.5 mm to RCA plug for aux... Thanks guys.
Sent from my SAMSUNG-SGH-I897 using XDA App
I had some trouble with this, but the key for me was making my Pioneer head unit "forget" my previous phone. Now it works great!
Actually there is a way to stream music wirelessly to your car stereo: mini FM transmitters. Quite cheap on ebay. I wouldn't bet on audio quality tho.

Headphones with working previous/next/volume buttons

Are there any good in-ear headphones with working previous/next buttons to control next/previous track and volume in any music player?
Hi well I've been using the Altec Lansing BackBeat 903 Bluetooth Headset for about 3 months now and that has all the features your looking for plus they sound damn good as well.
I use the stock headphones with winamp, and double tap the pause button and it skips to the next track
But for a real solution with back.. you could get one of the little reciever thingies with a 3.5 jack, so you get wireless + controls + any headphone you like ^_^. But there could be some quality loss if its cheap..
Motorola's s9-HD also have theses foncions enabled.
Thanks for the replies. Those two seem to be ear-hugging types, are there any with regular design?
the best would be to use the Nokia remotes that came with the n95 and others. But apparently it doesn't work since the layout inside the jack are not the same between Samsung and Nokia... too bad
I have a question about this topic, I tried to use the apple in-ear headphones with the mic and the volume buttons on my SGS but when i fully plug it into the jack, theres no sound.... but if i leave it out abit then it works fine.... Do u guys know what is going on?
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
PhoenixFx said:
But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
Could you please tell me is this possible with bluetooth clips:
I connect wired headphones to SGS directly (not to the bluetooth clip 3.5mm hole), pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons. When the call comes I hear it in headphones and start-stop player or push call answer button on bluetooth clip. After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic. After call is ended I can start-stop playing music again by bluetooth buttons. This is 100% tested or it's is appeared to be working? Thanks.
baribalbear said:
Could you please tell me is this possible with bluetooth clips:
Click to expand...
Click to collapse
I don't think it works like that, but I have to check to confirm.
baribalbear said:
pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons.
Click to expand...
Click to collapse
When you are not using BT audio, I doubt the player will respond to BT player controls.
baribalbear said:
After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic.
Click to expand...
Click to collapse
I dont think you can split the mic and headset function like that, either you use the BT for both mic and headphone or not at all. (unless someone modifies the driver). But again, something I have to check to confirm.
For basic call and volume controls something like this might work.
Here is another alternative, but no mic (not released yet either).
PhoenixFx said:
Here is what I use (Motorola S605):
Click to expand...
Click to collapse
Very helpful, purchasing from ebay as we speak, im sick of not being able to switch song whilst cycling...
Just a question really, do you just use the standard samsung music player?
PhoenixFx said:
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
I like these, thanks.
How does this things work? Do you plug anything to the usb port or do you just enable blutooth and play? Also can you use previous/next buttons while the screen is locked? Can you do these with the default player or do you need anything like WidgetLocker and add the player to the lock screen?
Also are there any wired versions of these?

[Q] Audio to non A2DP headset

Hi,
I'm wondering if there is any way to stream audio music and/or FM radio from Windows Phone 7 (I have the HTC HD7) to a non A2DP Bluetooth headset (I have the Jabra EasyGO).
It seems that I can only make and receive calls with it.
I've searched all over the place (and web) and cannot find a way to do that.
The only way is to get a new Bluetooth headset with A2DP capability?
Is there is a workaround, please let me know.
Thanks.
I don't know of one. As far as I know, the Headset profile is mono-channel only (plus another channel for the mic) anyhow, and probably quite low bandwidth, so it would likely sound awful.
Thanks for your answer GoodDayToDie.
But I don't mind for quality... Actually I'm not interested to listen for audio.
I just want, for example, to hear drive directions when I'm driving using navigation software (Navigon) instead of hearing from the loudspeaker.
Hmm... I thought the phone *would* use Headset profile for driving directions. Weird. I find the WP7 implementation to be so bad that I prefer to keep using a 4-year-old Garmin Nuvi instead, but I could have sworn I tested it and it came over the BT (and my car only has Headset, not A2DP). Maybe poke around in Settings?
Alternatively, if your car has Aux In, you could use a ripping cable (double-ended headphone cord, they're very cheap) and then the phone will play instructions over the cable into the car's stereo. This is also a great way to use the phone's music player, including Zune Pass if you have it, to play music in the car (I do this all the time). It uses less battery than having Bluetooth transmitting constantly would anyhow.

Home Audio System - Help needed

I am looking to buy a home audio system, however unlike most people I don't want a big sound system for listening to movies or playing music really loud. My goal is to be able to play music throughout the house at low enough levels where you can talk over it.
I just want to place a bunch of small speakers on the cieling in different rooms as well is on the back porch.
I have a Mac Computer, Galaxy Nexus, and Transformer Prime. All of which can play all of my music. On top of that I have GoogleTV (Logitech Revue).
What is my best option for home audio (preferably through Google Music)?
Is my best bet to wait for "[email protected]"?
I have a bunch of old surround sound speakers that I don't use anymore, can I use those for low volume music playing? Don't want to spend $1000 on this...
what system you use doesn't matter that much, its controlling how your going to get the music from your music cloud (i'm assuming for you google music) to the rooms
your logitech revue can now use google music app
furthermore with the RF emitter of your logitech revue, your phone would be able to control your surround sound components from anywhere in the house..
or you can set up some type of media server on a computer and run that to audio system VIA HDMI
and there is a plethora of apps to control a media server remotely from your android device
checkout out plex media server or similiar solutions
for your actual system check out nuvo technologies
is a good place to start, these are really expensive though
or google HTD
be forwarned, whole house audio solutions aren't cheap
My Setup:
Crappy computer with a good sound card and windows and Spotify on it
This is connected to my 10.2 (5.1 of these are used for my surround sound in the living room, the other 5.1 are on a different channel and are used for around house audio) via HDMI
This surround sound system is programmed into my Logitech Revue Harmony software, thus allowing the control of it through my phone
I also have Spotify remote control app on my phone to control spotify on the crappy computer, thus allowing volume and content control all from the phone... hope this helps!
And yes, you can use your existing surround sound speakers as long as they use generic audio cable (black/red), you would just need to buy a central reciever and run all of your wires through the house, for what your talking any surround sound reciever will work, a good one with 5+ channels should run you max 600 bucks and that is MAX you could get in the 300 range if you wanted.
Best solution for you IMO would be to hook your logitech revue up to whatever audio solution you get and play google music through that
Awesome, thanks for the very detailed reply.
I think I will look for an inexpensive receiver and use my Revue. My only question now is how do I hook up my GoogleTV to a receiver?
I do not want my tv to run through the audio system, I want to play tv through the tv speakers.
A more expensive route (but the best quality and noob friendly) would be a set of Sonos.
I have a media center based on Windows Media Center .All works very well.

Categories

Resources