Related
Edited
more pictures: click
also: kinda solved. They're black marks and no scratches. Will try to get them away with some alcohol soon.
###################
ORIGINAL POST
###################
Hello,
I always use the original Android sleeve with my Nexus One. I have it in it in my pocket around 10 hours a day when working. (with the Trackball on the open side of the sleeve and the display to the "Droid" side)
A week ago (got it since 15th Jan) I noticed some "scratches" at the top on my N1.
Here's a crappy picture shot with a crappy cam.
Will do a better pic tomorrow but I think you can guess what I mean
###################
I stick the phone into the sleeve just as you described and haven't noticed any kind of scratches on the top. I've had it since Feb 18th.
St.Jimmy! said:
I stick the phone into the sleeve just as you described and haven't noticed any kind of scratches on the top. I've had it since Feb 18th.
Click to expand...
Click to collapse
The Pouch looks of decent quality to me aswell
I'm using it because I thought the quality is just great!
Well, it still is great but the scratches annoy the hell outta me..
noticed it a week ago and it wasn't that much as today :\
Maybe it does "rub" it off with some dust and much moving? I'm always going around and anything @ work, much movement in my pockets ^^
I think the scratches coz' by rubbing on the wall or something else, not by the pouch. I'm getting a case from case-mate though I like the pouch a lot but it's quite annoying sometimes.
what do you mean with wall?
I mean some rough surfaces
Its because the seams are on the inside, including the stitches. Those WILL rub on your phone and cause scratches if the phone moves around inside, even a little.
MintyFloss said:
Its because the seams are on the inside, including the stitches. Those WILL rub on your phone and cause scratches if the phone moves around inside, even a little.
Click to expand...
Click to collapse
Really? Cuz my phone's in the sleeve for probably 14 hours a day and is still flawless. Obviously you didn't look at the pic, cuz the scuffs are at the top that is exposed while in the sleeve. I'm betting the OP puts other stuff in that pocket with the phone... bad idea.
same here, I use the sleeve constantly and have no scratches...did you get dirt or something in your pouch?
Use the sleeve a lot and have no scratches or marks on the N1.
I don't see the N1 as being like an iPhone. For me the side and back is durable and I am not worried about scratches - only the screen concerns me which is why I have a screen protector...
Talking about how phones are made I have to say I think the HD2 is the most durable phone right now with quality and style. The top and sides are almost rubbery so quite resistant to scractches and the back is metal -which although not scratch proof is most definately very resistant to any wear.
xPatriicK said:
Hello,
I always use the original Android sleeve with my Nexus One. I have it in it in my pocket around 10 hours a day when working. (with the Trackball on the open side of the sleeve and the display to the "Droid" side)
A week ago (got it since 15th Jan) I noticed some "scratches" at the top on my N1.
Here's a crappy picture shot with a crappy cam.
Will do a better pic tomorrow but I think you can guess what I mean
Click to expand...
Click to collapse
Keep your case clean, I have experienced no such problems and I make it a point to keep the inside of the case clean for obvious reasons.
When cleaning the case, I turn the whole thing inside out, shake it out and vacuum it.
Edit: One thing I have noticed is that the phone is prone to marks/scratches quite easily when dropped or bumped into something, as opposed to normal wear and tear (in and out of pocket/case, rubbing against keys etc). I am not really surprised by this, just figured I would note it.
Mintyfloss is right, that's causing it and I were about to write it right now since I Googled the translation just before reading that post I'm not having anything else in my pocket!
How to avoid these "scratches"? Will put the phone with the bottom first in the sleeve now..
Edit: didn't see the second site until now
I also never ever dropped the phone.
cleaned the sleeve yesterday inside out, hope it helps..
Another edit, not sure if needed: I have the phone and. The sleeve upside down in my pocket
uansari1 said:
Really? Cuz my phone's in the sleeve for probably 14 hours a day and is still flawless. Obviously you didn't look at the pic, cuz the scuffs are at the top that is exposed while in the sleeve. I'm betting the OP puts other stuff in that pocket with the phone... bad idea.
Click to expand...
Click to collapse
No, I looked at the pics, and i also READ. OP says he puts the top of the phone into the bottom of the sleeve.
http://www.youtube.com/watch?v=gpGAW6L5x8U
http://www.youtube.com/watch?v=RfqwKa4bT74
St.Jimmy! said:
http://www.youtube.com/watch?v=gpGAW6L5x8U
http://www.youtube.com/watch?v=RfqwKa4bT74
Click to expand...
Click to collapse
Yea, the sleeve can't scratch the Teflon coated phone, it just marks it. I have heard in this forums that you can get away the marks with a little bit of alcohol and a handkerchief.
Hope this helps...
I thought I had a little bit of scratching in the same area, luckily it rubbed off
St.Jimmy! said:
http://www.youtube.com/watch?v=gpGAW6L5x8U
Click to expand...
Click to collapse
You know I'm not talking about the DISPLAY!?
Okay, new pictures.
this is how I put the Nexus One into the sleeve
this is a pic of the "scratch"
this and this too but another view
thanks for your answers
Actually, to be honest, I'm having the same thing happen with my phone. I put my phone in the the other way than you and I have those marks on the bottom. Although it doesn't really look or feel like scratches. Just looks like little black marks on it and could come off if you rubbed it with alcohol or something.
I got my phone screen replaced. that is what started the dust under the screen issue. I am sending back to have them clean it out again, but, I don't want this to happen again. Any recommendations of how to keep the dust out after I get it back? Cases, etc.?
Droidicus said:
I got my phone screen replaced. that is what started the dust under the screen issue. I am sending back to have them clean it out again, but, I don't want this to happen again. Any recommendations of how to keep the dust out after I get it back? Cases, etc.?
Click to expand...
Click to collapse
Theres away to do this using selecon u may search it here or in google peace
Sent from my Sensation using XDA
Droidicus said:
I got my phone screen replaced. that is what started the dust under the screen issue. I am sending back to have them clean it out again, but, I don't want this to happen again. Any recommendations of how to keep the dust out after I get it back? Cases, etc.?
Click to expand...
Click to collapse
You might want to apply some silicon around the screen's edges to prevent dust. The one I used was Ultra Black.
After that, get a case that seals the edges as well. I use the Incipio case, real good material and a great snug fit.
After that, get a case that seals the edges as well
I'll have to check this case out. I've already had my phone replaced once under warranty with TMO but I've already gotten dust under this screen too. And this after TMO told me that they HTC had "fixed" the issue. Obviously not. Going to swap this one out again before my warranty is up in a month or two.
bofiana said:
After that, get a case that seals the edges as well
I'll have to check this case out. I've already had my phone replaced once under warranty with TMO but I've already gotten dust under this screen too. And this after TMO told me that they HTC had "fixed" the issue. Obviously not. Going to swap this one out again before my warranty is up in a month or two.
Click to expand...
Click to collapse
Yep, a case definitely helps. Especially one that rises over the screen and covers the edges. It seals the phone from dust. Doesn't hurt opening the phone up daily and cleaning it with a q-tip too.
i have the same problem
hey ungraph
can u post pics as to where on the screen you applied the silicon gel. There is too much dust under my screen and its increasing by the day
I prevent dust under my screen successfully by using a plastic phone case that wraps over the corners of the phone and snaps tightly.I've had my device for almost a year now and the case has prevented the dust from coming under the screen! You can buy these types of cases on amazon very cheap about 5 dollars . They have a huge selection. Or you can try the silicone tricks. Personally I'd much rather use the case than put silicone on my device. These cases snap tightly shut and are hard plastic. They are not easy to get off but very effective in preventing the dust from entering! Hope this helps. It works for me! I also use a screen protector so the cases is wrapped Over the protector.
It's nice and tight . No dust whatsoever! I'd give it a try. Make sure to get the hard plastic case the others Are not tight enough. Best wishes! The top of the case covers the corners . It works wonderfully! It's up to you in whatever you decide to do but at least you have another option. It works like a charm!
Sent from my HTC Sensation 4G using xda premium
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
lambstone said:
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
Click to expand...
Click to collapse
Even if i just got the product there is nothing i can do to get a replacement? I mean isnt there like a 30 day thing if im not satisfied?
Yes there is, but you have to pay half of the price to get a new one
Sent from my SGH-M919 using Tapatalk 2
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
blackguy101 said:
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
Click to expand...
Click to collapse
Yeap, http://www.spigen.com/need1more
You have to be quick, there is a 30days time frame from when you purchased.
I must be just as bad. This is the most frustrating screen protecter to apply. I've been known to mess up once but never had this much problems. It floats off center, fingers holding it and getting in the way. Front plastic made it hard to estimate the edge with the rounded corners, getting caught as well on fingers as I let go pushing it slightly to one side. Unable to pry it back up without barely scraping the adhesive ruining one corner if not multiple edges from micro fuzz etc. The squeegee is worthless on the glass, back protector is fine but just have to deal with it.
Must be me. Oh well. Good thing I get the cheap ass protector with my Neo Hybrid case.
You tried the masking tape method?
Align it the screen protector without peeling off the back cover. Once it's in place, use making tape to hold it in place, like a book. Put some a strip from the front down across onto the phone. You should be able to "open" it like the page from a book. Then apply it. Should make things easier.
a Good company will stand behind their products. After seeing my brother's Hybrid case and reading some things on their customer service, I chose to pass on Spigen.
The clear coat on his bumper part is already chipping way, the whole thing looks like a cheap Chinese knock off ( bought directly from Spigen).
Zagg for example, a product I don't recommend at all because 1) It's a horrible product 2) it's ridiculously expensive. But the only thing they have is pretty much unquestioned replacements. Which I'm sure they can do because of ridiculous markup.
BTW, it might not be your fault at all, because these are rigid glass pieces, they have to be flat in order to stick to the phone. a SLIGHT imperfection will cause it to not stick.
All that being said, I went with MIME glass protector.
I have the glas t and I love it. They are much easier to apply then typical plastic ones as they dont bend and flop around when applying. When I applied mine it lined up perfectly but I did get lint under it right in the middle of the damn screen. I tried dealing with it but couldn't take it so I lifted it half way up with my finger nail and used scotch tape to get the lint off... dropped it back down and it looked even worse. I thought i wasted 27 bucks until the morning when I looked at my screen and bubbles were gone. So it is possible to remove lint just dont touch the adhesive.
Sent from my SPH-L720 using xda premium
just pay the half price spigen charges to replace it and move on. sulk it up as paying for a learning experience.
they already mention that the best method for aligning the thing is to use scotch tape on the top and bottom aligning it then drop down.
if you dont want any dust trapped, well don't mind me for stating the obvious but... don't work in a dusty room, close windows/doors turn off fans... don't breathe too hard on it lol.
use a photo air duster like a Rocket blower, to remove any left over dust/lint from cleaning the screen. I find that camera lens solution and lens paper works perfectly for prepping the surface. use the included stickers to remove any left over dust that cannot be blown away by the rocket blower.
if you can do not reapply once completely set down, when applying make sure it's aligned, bottom edges, make sure the gaps are evenly distributed on all sides, cutout holes centered...
when applying and you notice it is not centered gently lift up but never touch the adhesive side. lift up with only scotch tape.
I've been applying screen protectors for years and have gotten it down to a science... everyone comes to me to get theirs installed haha...
Once any part of this is adhered scotch tape is useless as it's glass. you have to use a suction cup or your finger nail you just have to be careful.
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
i installed mines 5 days ago and got a 2mm air bubble on the right side of the home button i couldn't squeegee it out and doesn't seem to want to go away. has anyone else experienced this? is there anything i can do to get rid of it or will it eventually go away on its own? fortunately its not on the actual screen but its still an eyesore
i re applied my twice, wif no side effect, just dun touch the adhesive side, use industrial musking tape to lift it and for dust on under the screen, use scotch tape to remove it. key point is to never touch e adhesive side wif ur finger. nothing wrong wif this product, love it! its like the original screen, just tat if u really scratch it, u can remove it and there is the perfect screen below it.
btw for those tat claim it could b an production defects tat the glass is not perfectly straight, being in the glass industry for over 30 yrs, its actually easier and cheaper to create prefectly straight glass then any wif the slightest curve.
Sent from my GT-I9500 using xda premium
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
Same thing happened to me so I had to return it. The install came out perfect but the top left did not want to seal/adhere properly. I was so disappointed so I just went with the tried and true zagg. I purchased the protector from eBay so the return policy is different from their website.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
just tried lifting up that part of the screen for a few seconds and putting it back down. this air bubble is like a giant zit that wont go away
blackguy101 said:
I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
This is why I chose MIME. Email response is lightning quick and they include a hand written note in the package. Would definitely send you a new one without a question
Sent from my SGH-M919 using Tapatalk 2
The issue with it not laying after picking it up with your fingernail is not necessarily because the adhesive has gone bad. You need to level out the edge you stuck your nail under. Happened to me, fixed it with the squeege between the phone glass and the protector, prying up to level out the edge.
drbveb88 said:
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
So installed my tr, first try no bubbles.Seriously looks and feels like the samsung glass. AMAZING!!!
The steam trick works. Its not like its a sauna and your phone is a steamy. The steam is like a static electricity to dust.
Sent from my SCH-I535 using xda premium
I dropped my phone earlier, i have a thin case on it, it fell back down and the display cracked, not the outer glass, but cracks on the inside. Are these phones really that fragile that their display will break from being dropped on the back at about table height? That seems like nonsense. Good thing i have a warranty.
Sorry about your bad luck, got pics of the case and the phone?
954wrecker said:
Sorry about your bad luck, got pics of the case and the phone?
Click to expand...
Click to collapse
I got a few pictures, front and back of the case and tried to get a closeup of the cracks, i cant feel them at all, i believe they're LCD cracks.
Damn i dropped mine today at work but luckily i have a durable otterbox knock off that saved it, but the fall on asphalt broke the corner of case off,also have a tempered glass screen protector on,did it land face down???
Sent from the corner of "Long & Gone"
jwhood said:
Damn i dropped mine today at work but luckily i have a durable otterbox knock off that saved it, but the fall on asphalt broke the corner of case off,also have a tempered glass screen protector on,did it land face down???
Sent from the corner of "Long & Gone"
Click to expand...
Click to collapse
It landed on the back, it landed face up, that's why I'm still confused as to why it cracked
That sucks bro,when my fell out my hand it was like time slowed down,i was like...........nnooooooooooo!!!!: /
Sent from the corner of "Long & Gone"
jwhood said:
That sucks bro,when my fell out my hand it was like time slowed down,i was like...........nnooooooooooo!!!!: /
Sent from the corner of "Long & Gone"
Click to expand...
Click to collapse
I feel you. When i picked it up, i thought it was fine, then my display wouldn't turn on, i looked and saw a few cracks i couldn't feel and it sucks, but i got a replacement through my TEP. $200 out of someone else not watching out where they were going i guess
My wife dropped her s5 with a case and a glass screen protector on it and it vracked only the digitizer.... screen was ok..... well thats when we got the n5s.... hehehe so its not the n5 being weak!!!
Nature of the beast. Get an Otterbox case. Well worth it..
schlepprock said:
Nature of the beast. Get an Otterbox case. Well worth it..
Click to expand...
Click to collapse
Are they really as good as everyone says they are? I've never had one, i much prefer thinner cases, but you're right, it may be worth it this time around
I used to work as a sales rep at a Sprint store and I would demo my otterbox by throwing my phone across the room. They work. Out of about 300 throws I got 1 cracked screen, so I'd say those odds are pretty good.
bosswick said:
I used to work as a sales rep at a Sprint store and I would demo my otterbox by throwing my phone across the room. They work. Out of about 300 throws I got 1 cracked screen, so I'd say those odds are pretty good.
Click to expand...
Click to collapse
They do work but you now have a brick for a phone instead of a slim/seek device. Tradeoffs.
I can't tell.... and if there isn't I don't want to pick at it and scratch it.
Nope
I just did the exact thing. eBay has the part it's easy to fix I did it. Just don't get the acrylic one. And ask before buying even if the picture looks like the OEM glass one make sure! Unless you want the acrylic one it's less prone to cracking but will scratch.
Sent from my LG-H830 using XDA-Developers mobile app
darkpower_4 said:
I just did the exact thing. eBay has the part it's easy to fix I did it. Just don't get the acrylic one. And ask before buying even if the picture looks like the OEM glass one make sure! Unless you want the acrylic one it's less prone to cracking but will scratch.
Click to expand...
Click to collapse
How did you replace it?
I did actually get the acrylic one, as it is less likely to break again
kchannel9 said:
Nope
Click to expand...
Click to collapse
Ok, this not normal, how did it happened.:fingers-crossed:
kms108 said:
Ok, this not normal, how did it happened.:fingers-crossed:
Click to expand...
Click to collapse
Simply being in my pocket. You'll see on the forums this is happening to a lot of people. The consensus is that LG phoned it in on the camera glass quality.
kchannel9 said:
Simply being in my pocket. You'll see on the forums this is happening to a lot of people. The consensus is that LG phoned it in on the camera glass quality.
Click to expand...
Click to collapse
Yeh, I noticed all the glass problems, am I lucky or what, no problem for me with any problem mention in this forum about the glass built or any other stuff, and I had my G5 from day 1 after exchange it once, but I can remember the reason why I exchanged it.:fingers-crossed:
Just looking back at my camera len, I do have a deep scratch, but lucky I have a PET lens protector on, so it's only the protector that is scratched, at least I do have 3 spare one left.
kms108 said:
Yeh, I noticed all the glass problems, am I lucky or what, no problem for me with any problem mention in this forum about the glass built or any other stuff, and I had my G5 from day 1 after exchange it once, but I can remember the reason why I exchanged it.:fingers-crossed:
Just looking back at my camera len, I do have a deep scratch, but lucky I have a PET lens protector on, so it's only the protector that is scratched, at least I do have 3 spare one left.
Click to expand...
Click to collapse
Yeah I thought the same thing before I pulled the phone out of my pocket, nothing out of the ordinary had happened, and it was mysteriously broken. It's going to be like a recall if it gets really bad...
It doesn't take much pressure to brake it but it doesn't just do it on its own. This isn't the 6p being too tight around the glass and it breaking from expansion @kchannel9 just lift off what's left of your glass and peel it off no need to open the phone up. Just make sure no glass is left in it when you put the new one on. It should come with adhesive. And don't touch the lens! Cover it up if it breaks all the way it out or tape over it if it is just cracked to protect the camera! I might get the acrylic one to put over my glass replacement one now that I see how fragile it is.
Sent from my LG-H830 using XDA-Developers mobile app
It's simple to replace. Mine cracked and I ordered 2 off eBay. I had to replace it for a warranty exchange. Just use tweezers to get under the glass in the crack and peel it out. Insert the new adhesive sticker, then lay the new glass down. Takes about 5-10 minutes.
Sent from my LG-H830 using Tapatalk
Just replaced mine, was easy. The acrylic one I got from eBay/China works fine, though there are visible lines in the acrylic, it did not seem to effect the pictures taken. If I find with more testing that it does, I will get the glass again instead, and also add a glass protector as well. But for now seems fine.
Ok nevermind, after taking some pictures in full sun it is apparent that the acrylic adds a ghostly fuzziness to the images where there once was impressively sharp clarity. Going to order the glass version and a tempered glass protector for that piece as well. Really annoying, you'd think a $700 flagship phone wouldn't have this issue.
kchannel9 said:
Ok nevermind, after taking some pictures in full sun it is apparent that the acrylic adds a ghostly fuzziness to the images where there once was impressively sharp clarity. Going to order the glass version and a tempered glass protector for that piece as well. Really annoying, you'd think a $700 flagship phone wouldn't have this issue.
Click to expand...
Click to collapse
I think it's individual case, just unlucky, my unit is perfect.:fingers-crossed:
This thread's existence would suggest otherwise: http://forum.xda-developers.com/lg-g5/help/cracked-camera-lens-cover-t3351748/page6