hi friends
our x10 not support ad hoc wifi network
so here are some tricks to connect to our laptop wifi to use internet.
here you are:
!) well at first you need to create an ad-hoc(any name you can use for it, my ad-hoc name is xperia)
2) then sharing your internet on it!!
3) trun on your x10s wifi.
4) create a network on your x10 with the same name!!!(add Wi-Fi network)
5) turn off x10s wifi
6) go to data/misc/wif/
after you open wpa_supplicant.conf
you should see this text:
ctrl_interface=DIR=/data/system/
wpa_supplicant GROUP=system
update_config=1
network={
ssid="xperia"
scan_ssid=1
key_mgmt=NONE
}
change it like this:
ctrl_interface=DIR=/data/system/
wpa_supplicant GROUP=system
update_config=1
ap_scan=2
network={
ssid="xperia"
scan_ssid=1
key_mgmt=NONE
mode=1
}
dont forget the backup!!
if ur on android 2.1
than u will see wifi instead of system in wpa_supplicant Group=wifi..leave it as it is..just add some line as above..
ctrl_interface=DIR=/data/system/
wpa_supplicant GROUP=wifi
update_config=1
Thanks you! ! I need it so much!! Will testing it later on. WinXP is ok too right?
doobe66 said:
Thanks you! ! I need it so much!! Will testing it later on. WinXP is ok too right?
Click to expand...
Click to collapse
yaa it work on xp
Works! Thanks a ton for this.
I did everything just as you said, when I turn on the X10 wifi, first it can detect it, but after that when obtaining IP address from my laptop it's always unsuccessful.
I'm running on Windows 7. Can u help me please? Thanks in advance
I did everything.My wifi is connected but do not get internet access.Am using Windows 7
try this
rein_hiryu said:
I did everything just as you said, when I turn on the X10 wifi, first it can detect it, but after that when obtaining IP address from my laptop it's always unsuccessful.
I'm running on Windows 7. Can u help me please? Thanks in advance
Click to expand...
Click to collapse
windows 7 hummm i am not sure but try this..
edit ur wifi config file as follows
ctrl_interface=DIR=/data/system/
wpa_supplicant GROUP=system
update_config=1
ap_scan=2
network={
ssid="xperia"
scan_ssid=1
key_mgmt=NONE
mode=1
}
I have a much easier solution.
Just install Connectify, it's a tool that creates the ad hoc network for you with minimal supervision .
Works like a charm and is free .
someone tried it but no luck.
TobiasV said:
I have a much easier solution.
Just install Connectify, it's a tool that creates the ad hoc network for you with minimal supervision .
Works like a charm and is free .
Click to expand...
Click to collapse
hey friend..someone guy in this forum have tried it but no luck..it wont work for him...
lets try this and let me know it is working or not?
You can also install Barnacl Wifi Tether if you have rooted your x10. No need for configuration for wan and lan settings, just left them empty.
My x10 detect the laptop wifi but failed to connect, i have try to set the wifi data encryption disable, but still cant to connect.
ctrl_interface=DIR=/data/system/
wpa_supplicant GROUP=wifi
update_config=1
ap_scan=2
network={
ssid="xperia"
scan_ssid=1
key_mgmt=NONE
mode=1
}
share laptop internet with se x10
Follow these simple steps:
1.Install Connectify on Laptop
2.Do the configuration on Laptop(an easy step guide provided)
3.Activate wifi on X10 and search for wifi network
4.Select,put wpa password
5.Here you go.
N.B-Please disable Firewall on laptop.
Tested by myself on Windows 7.
dvildriver said:
Follow these simple steps:
1.Install Connectify on Laptop
2.Do the configuration on Laptop(an easy step guide provided)
3.Activate wifi on X10 and search for wifi network
4.Select,put wpa password
5.Here you go.
N.B-Please disable Firewall on laptop.
Tested by myself on Windows 7.
Click to expand...
Click to collapse
It works on windows 7 but what about win xp?? ..
for that u need to edit wifi config file as i explain before..
Related
Greetings to all. I have ROM prime 1.6. At me such problem. There is no return through wi-fi. Speed of return - 0. An access point - Ad-Hoc, created through Connectify me. What can it be? Forgive for my English
I'm not sure if ad hoc is possible on the Transformer. I've tried rooting mine and changing the wpa supplicant file with one that was supposed to work. No luck.
If anyone else has a way to get the Transformer to connect via ad hoc, I'm all ears.
skull leader said:
I'm not sure if ad hoc is possible on the Transformer. I've tried rooting mine and changing the wpa supplicant file with one that was supposed to work. No luck.
If anyone else has a way to get the Transformer to connect via ad hoc, I'm all ears.
Click to expand...
Click to collapse
Used a custom kernel?
skull leader said:
I'm not sure if ad hoc is possible on the Transformer. I've tried rooting mine and changing the wpa supplicant file with one that was supposed to work. No luck.
If anyone else has a way to get the Transformer to connect via ad hoc, I'm all ears.
Click to expand...
Click to collapse
I have my Asus transformer connecting to my iPhone which uses an adhoc type of connection
All ive done was add the wpa_supplicant to my Asus's System/bin and replaced the WPA that was there... oh by the way backup the old one before u replace it...
yout will need root access, root explorer and the modified Wpa_supplicant file
I used the search feature of this forum and found this for you -
adhoc thread 1
adhoc thread 2
adhoc thread 3
Mine works fine with my Hero running an adhoc spot.
Interesting... can I just confirm something?
So in order for my TF101 to detect and use Ad Hoc connections, i must do the following.
1. Root my TF 101
2. Replace the wpa_supplicant file
3. Have my Nokia 5800 run JoikuSpot
4. Done!
Sorry, i'm really new to this.
First of all i must say i tried to flash the original wpa_supplicant with these one http://forum.xda-developers.com/showpost.php?p=7716862&postcount=24 but it didn't worked so i tried to find other ways...
So i accessed /data/misc/wifi/wpa_supplicant.conf with a text editor and then i wrote after what it was there :
eapol_version=2
ap_scan=2
network={
ssid=”default” ——-> because this is the ssid of my ad hoc network
scan_ssid=1
key_mgmt=NONE
group=WEP104
auth_alg=OPEN SHARED
priority=99
mode=1
}
I can now connect to my ad hoc network but i dont know if i can connect to other ad-hoc....
If somebody else managed to have ad hoc networking on this phone please write here ...
ad hoc connected
i tested your method to connect to ad hoc.
successful connection.
i have vodafone 858 with SmartLucky 2.4 ROM
thank you so much
I have been testing other methods with no luck
Hi everybody,
Does anyone has a wpa_supplicant file compatible with Dell Streak 5 Custom ROM DJ_Steve 2.4.4.
I'm trying to connect to an Ad Hoc network, "Wifi Manager" app can recognize the signal but unable to connect (Dell Wifi Manager cannot see the Signal form Ad Hoc Network)
I tried wpa_supplicant from http://forum.xda-developers.com/showthread.php?t=1252619 and from http://forum.xda-developers.com/showthread.php?t=964841&page=359 but it not working.
-------------------------------------
What I have done.
1. Enable W/R first, Copy wpa_supplicant into system/bin by using "File Manager"
2. Disable W/R after copied wpa_supplicant file
3. Restart the Dell
4. Turn off wifi and then turn it on
5. Cannot connect. (Dell Wifi Manager cannot see Wifi signal from Ad Hoc Network)
Any advices will be appreciated
Thank you!
I have used that ROM and this ROM
http://forum.xda-developers.com/showthread.php?t=1355878&highlight=landscape
I find the later is better. You may like to tried that instead.
●●[ROOTED][GUIDE]Wifi Reverse teTher-Windows and Ubuntu-Ad hoc Networks●●
This guide teaches you to reverse tether your Android phone via WiFi. That is, it allows you to use your Ethernet connection of PC on your Android phone. It is useful for those who do not have WiFi routers and data connection. So if you have unlimited data plan for your computer, why not share the connection with your phone?
I am not the developer of the files supplied
Requirements:-
1.Rooted Phone
2.Wifi enabled Laptop or PC
3.Root explorer or any other application which gives system access
4.File in the attachement
Procedure :-
Phone:
Download Wpa_supplicant.zip and extract "wpa_supplicant" from it, save it on your SD card.
Open Root Explorer, and grant it superuser access when asked for.
Navigate to system -> bin and long press on wpa_supplicant; Select copy, and paste the file into any folder on your SD card.
Now navigate to the file you downloaded, copy it in same way, and paste it back to system -> bin. Note, you might need to mount the system as R/W instead of R/O by pressing a button on the top just before pasting the file.
Reboot.
▬▬Ubuntu (Must work for other Linux Distros too)▬▬:
Open Network Connections
Goto Wireless tab, select add, and set the following:
SSID: <Any_name_you_like>
Mode: Ad hoc
Leave other things unchanged, and go to Ipv4 settings tab
Set method to Shared to other computers
Go to Wireless security tab and set Security to WEP 40/128 bit key and set key to a numeric password (or hexadecimal one).
Check the connect automatically box on top of the tabs and press Save.
Your Android phone must now detect this network, and you can establish the connection by using your security key.
▬▬Windows XP, Vista, 7▬▬
Download and Install Connectify from www . connectify.me/download-lite/
Start Connectify Hotspot by giving a name and password to your hotspot and selecting the Ethernet connection to share. Make sure the security type is WEP or Open.
Disable your firewall (Simply adding it to exceptions doesn't work for AVG at least)
Now your phone should be able to see the hotspot and establish the connection using the password set.
Known Issues :
1.Random disconnections (Very less frequency)
2.Disconnections due to screen lock / sleep on laptop
3.For me Security mode does not works
HIT THANKS IF IT WORKED
ENJOY
Hope it works....
Do you know how to enable wifi on pc?...
coz i have cable modem only on desktop and only that one has unlimited packs...so
onceupondev said:
Do you know how to enable wifi on pc?...
coz i have cable modem only on desktop and only that one has unlimited packs...so
Click to expand...
Click to collapse
PC is wifi enabled ??
amn_grg said:
Hope it works....
Click to expand...
Click to collapse
it will surely work
avilove4u said:
PC is wifi enabled ??
Click to expand...
Click to collapse
I dont know...seriously...
Tell me in detail please...
Well wat does dat file do in specific??coz der's no prob 4r me conectng using connectify..
and hey u can share pc or laptops net through ad hoc ntwrk i thnk u knw dat
MajinSaiyan4 said:
Well wat does dat file do in specific??coz der's no prob 4r me conectng using connectify..
and hey u can share pc or laptops net through ad hoc ntwrk i thnk u knw dat
Click to expand...
Click to collapse
Yeah but connectify allows more option like file sharing etc .
That file enables reverse tethering via wifi
onceupondev said:
I dont know...seriously...
Tell me in detail please...
Click to expand...
Click to collapse
Ur PC is wifi enabled or not ??
avilove4u said:
Ur PC is wifi enabled or not ??
Click to expand...
Click to collapse
How to know that?
onceupondev said:
How to know that?
Click to expand...
Click to collapse
check ur PC's spec
or
If you still haven't found anything to indicate that your computer is Wi-Fi enabled, right-click on "Computer" again, select "Manage" and "Device Manager." Then click on the "Hardware" tab. Read the list below "Network Adapters." Note that any adapter labeled "Ethernet" or "10/100" has nothing to do with wireless compatibility. However, any adapter labeled "wireless" or "802.11" indicates compatibility.
onceupondev said:
How to know that?
Click to expand...
Click to collapse
http://www.ehow.com/how_2171696_check-computer-wifi-enabled.html
hope that helps.
I am here again with a problem, sorry. Please read this fully !
I have a lenovo laptop and a PC, i dont use laptop at all, but i tried to Start a wifi hotspot using Connecity....but i am not able to start a hotspot as it says NO AP MODE SUPPORTED (http://imgur.com/Bcwgl)
Note; i have enabled my wifi but yet it say, please enable, my wifi card is Intel Pro Wireless 3945ABG.
I downloaded the older version and installed, but somehow i can manage to start a hotspot with it, but it also say the above said error,
but it will start hotspot atleast.
There are only 2 Secutiry mode here and all are AD-HOC, one is Open another is WEP.
my mobile is not detecting the hotspot even if created....what is the solution for this...
i searched and got a info (http://forum.xda-developers.com/showthread.php?t=1115610)
there they told to paste a file...but when i open rootexplore it says this error;
http://imgur.com/zIjbe
What can i do now.
my phone is rooted.
connectify say my wifi card is abandoned, new version will not start hotspot, but old version it say NO AP MODE SELECTED, but it will start the hotspot.
Connectify support; http://support.connectify.me/entrie...at-are-known-to-be-compatible-with-connectify
there its written my wifi card is abandoned.
I cant afford to buy a router or new wifi modem, plz help with this.
You have the answer in your OP itself. Check this out:
nectify can work in Ad-Hoc mode with just about any Wi-Fi device on Windows 7, Vista, or XP.
However, to run in Access Point mode, you must be running Windows 7, and you must have a Windows 7 certified network device driver for your Wi-Fi device. You have this device driver if you own any Windows 7 logo certified Wi-Fi device (laptop, dongle, card, etc.). However, many older devices have also been updated with Windows 7 certified drivers.
Click to expand...
Click to collapse
And this:
The following are known "abandoned" devices, believed to lack certified Windows 7 drivers from their manufacturers. They could of course be updated at any time.
Click to expand...
Click to collapse
Wait until & if Intel releases a Win 7 compatible driver for your card.
Check if they have already released an update for your card which you may not have installed.
Hope this helps.
Adhoc does not work...
Not the...
Only.. The following
Will work...try configuring like this....
name
Password
select ur source...
Advanced..
Wpa2-psk
I think it will work with android..other settings don't work with android.. I had tested... Hope it helps....
Sent via XDA App....
SGR 2.3.6 Neo Rom with Voodoo Sound Enhancements.......
'cooleagle' said:
You have the answer in your OP itself. Check this out:
And this:
Wait until & if Intel releases a Win 7 compatible driver for your card.
Check if they have already released an update for your card which you may not have installed.
Hope this helps.
Click to expand...
Click to collapse
bhargav143 said:
Adhoc does not work...
Not the...
Only.. The following
Will work...try configuring like this....
name
Password
select ur source...
Advanced..
Wpa2-psk
I think it will work with android..other settings don't work with android.. I had tested... Hope it helps....
Sent via XDA App....
SGR 2.3.6 Neo Rom with Voodoo Sound Enhancements.......
Click to expand...
Click to collapse
Guyssssssssss.....i found a solution....
here it is...
http://forum.xda-developers.com/showthread.php?t=1115610
But i am using Old Connectify, as new version doent allow me to start hotspot, it say no ap mode supported...
Even the old version say that, but it allow me to create the hotspot.
I have updated the drive @cooleagle
Now i am using this setting AD-HOC WEP.
not open
But thanks for trying to help me
Instead of replacing your wpa_Supplciant file manually, you can use wifi adhoc enabler app which will take a backup of your wpa_supplicant file and modify it so that our mobile will detect adhoc-wifi.
Im using Dell laptop, Windows Vista and adhoc wifi enabled using connectify and sharing that with my SGR
selva.simple said:
Instead of replacing your wpa_Supplciant file manually, you can use wifi adhoc enabler app which will take a backup of your wpa_supplicant file and modify it so that our mobile will detect adhoc-wifi.
Im using Dell laptop, Windows Vista and adhoc wifi enabled using connectify and sharing that with my SGR
Click to expand...
Click to collapse
oh is it, however i have took a backup of original file...
can u give the link of that app ??? will that work without rooting..
chandrus1983 said:
can u give the link of that app ??? will that work without rooting..
Click to expand...
Click to collapse
WiFi Ad Hoc Enabler
It will work only in rooted devices. Because Andorid cannot detech Adhoc WiFi in general. Only a rooted device with the wpa_supplicant file change can do that. Since its a system file, rooting is must
We're sorry, the requested URL was not found on this server.
anyways, i have did some patch n its working now
not connecting in my SGS 2
hi frds. connectify succesfully strted in my laptop. tht connectify wifi signal also showng in my mobile. when i connect it itz showng obtaining ip address. after tht nothing happeng, itz jus keep on repeatng the same. not at all connecting. help me frds
kalaikvanan said:
hi frds. connectify succesfully strted in my laptop. tht connectify wifi signal also showng in my mobile. when i connect it itz showng obtaining ip address. after tht nothing happeng, itz jus keep on repeatng the same. not at all connecting. help me frds
Click to expand...
Click to collapse
Using ICS or GB ???? Rooted ??