Related
I've tweaked the kernel from the CursorSense ROM; it is my favourite ROM. My intention is to make it faster and to increase battery life. The ROM only supports FAT partitions. Any feedback would be appreciated.
Version 1.0: http://www.4shared.com/file/208581550/6a414d48/HoFo-Cursor-10.html
To install it, just run it as a regular update after you install the CursorSense ROM.
hotweiss said:
I've tweaked the kernel from the CursorSense ROM; it is my favourite ROM. My intention is to make it faster and to increase battery life. The ROM only supports FAT partitions. Any feedback would be appreciated.
Version 1.0: http://www.4shared.com/file/208581550/6a414d48/HoFo-Cursor-10.html
To install it, just run it as a regular update.
Click to expand...
Click to collapse
No need special radio or SPL? just update.zip will do? regardless of which HoFo we are from?
would you please post out changelog of your update？
hotweiss said:
I've tweaked the kernel from the CursorSense ROM; it is my favourite ROM. My intention is to make it faster and to increase battery life. The ROM only supports FAT partitions. Any feedback would be appreciated.
Version 1.0: http://www.4shared.com/file/208581550/6a414d48/HoFo-Cursor-10.html
To install it, just run it as a regular update.
Click to expand...
Click to collapse
hotweiss i thought you said you were going to let cursor do his thing?
shael said:
hotweiss i thought you said you were going to let cursor do his thing?
Click to expand...
Click to collapse
Oh yes, but this is a community effort. Just trying to make his ROM even that much more better.
hotweiss said:
Oh yes, but this is a community effort. Just trying to make his ROM even that much more better.
Click to expand...
Click to collapse
sweet so this is a kernel we install as an update to cursors rom? or yours?
nvm saw your post in his thread
MyWifeCar said:
No need special radio or SPL? just update.zip will do? regardless of which HoFo we are from?
Click to expand...
Click to collapse
You have to just install this update over top the CursorSense ROM. All this update changes is the boot.img and wlan.ko...
shael said:
sweet so this is a kernel we install as an update to cursors rom? or yours?
Click to expand...
Click to collapse
Cursors...
cadetnudt said:
would you please post out changelog of your update？
Click to expand...
Click to collapse
Change log:
- took out some debugging lines
- set minimum speed to 128 MHz
- and stuff I can't remember now...
hotweiss said:
You have to just install this update over top the CursorSense ROM. All this update changes is the boot.img and wlan.ko...
Click to expand...
Click to collapse
Thanks for the effort hotweiss! I will try this and give feedback.
Installed it. I really don't know how you can tell if the difference is significant or not. All what I can say is that there is no delay at all on anything. I also adb the new Rosie from another user. So now I have CursorSense 1.2.2 with new rosie and this new update. Good job and thanks for sharing your work everybody.
dorandroid said:
Installed it. I really don't know how you can tell if the difference is significant or not. All what I can say is that there is no delay at all on anything. I also adb the new Rosie from another user. So now I have CursorSense 1.2.2 with new rosie and this new update. Good job and thanks for sharing your work everybody.
Click to expand...
Click to collapse
no problem
Hi,
what is the screen off max CPU frequency? Im pretty sure that A2DP will have problems if its not 480MHz.
good job, it is better than default kernel
eyegor said:
Hi,
what is the screen off max CPU frequency? Im pretty sure that A2DP will have problems if its not 480MHz.
Click to expand...
Click to collapse
I left it at 480 MHz...
hotweiss said:
I left it at 480 MHz...
Click to expand...
Click to collapse
Will this allow things apps like OverclockWidget to modify the CPU scaling? Someone mentioned that something in the Kernel was blocking it.
Is there a way to enable back the swap from cursor's kernel ?
Rede83 said:
Will this allow things apps like OverclockWidget to modify the CPU scaling? Someone mentioned that something in the Kernel was blocking it.
Click to expand...
Click to collapse
The CPU frequency is still using PERFLOCK settings, so I really don't think and CPU throttling software will work.
Why do you need it anyway? Under normal use, PERFLOCK settings are the same as SetCPU...
I've just installed new CS 1.2.2 + your kernel + I removed some apps from the rom and... I don't know whether it's new CS or your kernel but everything seems little smoother (although it already was smooth before)
so thanks both to you and cursor for your astonishing work.
btw. I hope your kernel will also improve my battery life time a little bit 'coz now it's shorther than it used to be.
Tested the Kernel, and I find it difficult to say if there is any real improvment in speed.
Cursor has done a awesome job developing his CursorSense ROM, so I have reinstalled his ROM and Kernel.
Anybody know a way to get some benchmark to measure if there is any performance improvement?
Zachattack052 & Xillius200's Eclair (v1.1) "eats ponies for breakfast" [fast][stable]
This is really the 5th release, two of them underground and the other two was released to my beta testers. We have been working on this for the past month on and off and I am proud to say this is my daily driver..
Click to expand...
Click to collapse
Warning! We Are Not Responsible For Anything That Happens To Your Device
includes
- stock apps
- added taskiller
- fast!
- adw launcher
- optimized live wallpapers (only uses 2mb of ram)
- Supports G1/MT3G
- Automatic Apps2SD on G1
- WG-Kernel 5 v0.8
- twicca
- swapper
- 652mhz kernel
- video drivers
- fully functioning
Click to expand...
Click to collapse
credits
* cyanogen - For the use of his rom
* xxkolohexx - helped a lot
* nicked some things from wes
Click to expand...
Click to collapse
tips
- First two minutes after boot will be the slowest, So please be patient.
Click to expand...
Click to collapse
setcpu.txt http://bit.ly/cHWtSp
change log
v1.1 http://bit.ly/97315l
- new build (just to clarify its a repo sync combo of cyan and zx eclair)
- Over Clock kernel up to 652mhz (not on by default)
- a lot faster
- new boot animation
- new launcher (adw)
- lots of work done to userint.sh
- slightly changed the theme
- new defualt wallpaper
- live wallpapers (only one though, will add more in 1.1.2)
- everything is working perfectly (that means everything)
- video drivers
- no rh
v1.0 http://bit.ly/bb7ZrF
- own build
- first public release
download link?
edit* there it is, flashing now.
post #2 has the link
ciervo5389 said:
download link?
Click to expand...
Click to collapse
What are the effects of the mem leaks in this rom? Good thing I like watching youtube videos on the computa
protomanez said:
What are the effects of the mem leaks in this rom? Good thing I like watching youtube videos on the computa
Click to expand...
Click to collapse
nothing really just slow it down.. but its fast as hell you'll see
any suggestions of what ext to use? swap size?
Downloading, about to flash when its done, I'll report back
ciervo5389 said:
any suggestions of what ext to use? swap size?
Click to expand...
Click to collapse
not required.. but i recommend ext2 and the rest is up to you
Ahh, the speeds, wonderful. If you can update this weekly it could be something great in a month .
protomanez said:
Ahh, the speeds, wonderful. If you can update this weekly it could be something great in a month .
Click to expand...
Click to collapse
more like in a few days.. we have a new build lined up and still optimizing it etc
honestly you have a MT3G. Just flash Firerats A2SD script for MT3G and keep all your programs in internal memory and enjoy the speed of Zach and Xillius' creation
ciervo5389 said:
any suggestions of what ext to use? swap size?
Click to expand...
Click to collapse
the1gladiator said:
honestly you have a MT3G. Just flash Firerats A2SD script for MT3G and keep all your programs in internal memory and enjoy the speed of Zach and Xillius' creation
Click to expand...
Click to collapse
will include next update
zachattack052 said:
more like in a few days.. we have a new build lined up and still optimizing it etc
Click to expand...
Click to collapse
Never ceasing to amaze, fantastic. Keep it up man, you deserve a trophy or sumthin
zachattack052 said:
not required.. but i recommend ext2 and the rest is up to you
Click to expand...
Click to collapse
ok cool, its what im using.....happen to have 614 mhz hack??? or no.
ciervo5389 said:
ok cool, its what im using.....happen to have 614 mhz hack??? or no.
Click to expand...
Click to collapse
not yet...
zachattack052 said:
not yet...
Click to expand...
Click to collapse
ok cool
10 chars
Wait a sec, if I have optimized lwps on, will my battery life be effected a lot?
protomanez said:
Wait a sec, if I have optimized lwps on, will my battery life be effected a lot?
Click to expand...
Click to collapse
none once so ever
zachattack052 said:
none once so ever
Click to expand...
Click to collapse
I love you. No homo. BTW to people, put on swapper and this thing flys on the home screen
********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
Special thanks to PaoloM70.
Personal Thanks to Andy, Mik_os, Franciscofranco, Ciaox, Noejn and all other devs.
AmonRA to flash it with the need to disable the verification of signatures.
Overclocking
Smartass
Smoothass
Cifs
Supports EXT4
+upstream to 2.6.35.13
+oc, interactive, smartass, smoothass, cifs, ext4
+governor added SavagedZen
+autogroup scheduler (the patch of 200 lines)
+ smoothass smartass with a capped rate (standby) to set minimum
V3 Kernel -Old kernel:
ADB Bugfix for device
Reconfigured various kernel parameters (For better power management, CPU profiles)
-Added for the inversion axes Sippola in the new touch screen driver.
-Simple-inserted I / O scheduler (sio)
-Included various other patches 5-6
-Removed references-debug (smaller kernels)
-Small fix to reduce the impact on the CPU more pressure on the display (you can check with Neocore first ... the difference came in 8-well 9fps now settles down to 2-3fps)
******Updated 25 July*********
Magazine-routine to increase the stability and overclocking performance, cameraflick is absent up to 729mhz
Touch-fix which decreases the occupation of the CPU when you press your finger on the display (should no longer have the lag that had the first version of V4 (I hope))
Magazines-and reinsert all the previous patches (66 patches in total)
Inserted by the kernel-2.6.36 backport of block, and mtd workque
Backport-inserted by the kernel 3.0rc6 and cpufreq of cpuidle
http://www.mediafire.com/?g8r37pzsr3ig21j
+same kernel but without the fix for employment cpu (maybe better in the scroll lag if you have one) **No touch fix kernel***
http://www.mediafire.com/?bed0ht9kcz0071c
******Updated 08 Aug*********
Touch V6 2.6.35.14
V5-like, but updated to version 2.6.35.14
-Added 2.6.36 kernel backported from the i2c
-Support Module tun.ko
-Vsync enabled
http://www.mediafire.com/?otpne0w1v8bhnp8
If you want to try the version NoTouch kernel
http://www.mediafire.com/?4wuiscjcu5xal58
After flashing, wipe cache and davlik.
If you have a2sd then run the following in terminal:
su
a2sd cachesd
The phone will reboot automatically.
Download Ringing with No fade :Now supports Gingerbread 2.3.3 :
http://www.mediafire.com/?1xqcc0jppl2w9ic
Flash and enjoy
To know more the original idea, please visit the thread here :
Special Thanks to Januka for the idea.
For devs :
I/Paolo doesn't have a repository, So its uploaded here :
Kernel Ginger Source
http://d-h.st/jvn
u only need to change one line in Makefile
at line 193 change from
Code:
CROSS_COMPILE ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- #CROSS_COMPILE ?= arm-eabi-
to
Code:
#CROSS_COMPILE ?= /home/paolo/x-tools/arm-spica-linux-uclibcgnueabi/bin/arm-spica-linux-uclibcgnueabi- CROSS_COMPILE ?= arm-eabi-
Yes, I know I should use search, but please, can anyone explain to me how do smartass and smoothass work in comparison to, for example, conservative and ondemand?
And massive thanks to you mansirawat!
If you already know that you should use the search function, maybe you don't know HOW to use it...
Here's a "tutorial": http://lmgtfy.com/?q=android+governors
Otherwise, you're just plain lazy... which one is it?
Ciaox should see this thread , he is waiting for GB OC Kernel
P.S : Thank you for the Kernel
Otherwise, you prefer wasting perfectly good post space in order to lecture me. Just like half the members of XDA. And the fact that you supposedly come from Romania as well just shows...nah, why bring that up here, all foreigners know it already.
Great! Awesome! Pure awesome!
Thanks a lot!
Stock rooted GB with this kernel (652/320)-> 1152 in quadrant. I don't care too much about those points, but my phone is smoother.
Working fine with void forever...yeah its smooth ...got 2020 in quadrant at 806 MHz
Sent from my LG-P500 using XDA App
do i have to flash a new baseband before flashing this on any custom rom? thanks
Flashed it,let's see!
Thanks!
Best!
Great!
Awesome!
Pure awesome!
mansirawat said:
********* OFFICIAL FOR USE ONLY ON GINGERBREAD ***************
Special thanks to PaoloM70.
Overclocking
Smartass
Smoothass
Cifs
Doesn't support EXT4
Click to expand...
Click to collapse
Hey mansi hows the performance??? If its good then it will be included in my new ROM.
CWM can also be used to flash this zip. Tested(CWM 3.1.0.0) and worked.
sajjan said:
Working fine with void forever...yeah its smooth ...got 2020 in quadrant at 806 MHz
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Why would you use this on a custom rom? We have Francisco's kernels for that.
devlin2427 said:
Why would you use this on a custom rom? We have Francisco's kernels for that.
Click to expand...
Click to collapse
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Well I tried it out of curiousity ....and if not better it's definitely at par.....I still have to check battery life....
Sent from my LG-P500 using XDA App
cyber_avijit said:
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Click to expand...
Click to collapse
does this kernel require a new baseband?thanks
roi14 said:
does this kernel require a new baseband?thanks
Click to expand...
Click to collapse
Yes, of course.
cyber_avijit said:
its because krant,andy,mik's kernel are made of CM7 sources LG's are diff.
If you flash franco's kernel it will mk ur phone choppy. but you can try. if francos doesn't work you can flash this.....
Click to expand...
Click to collapse
I'm afraid you didn't understand my question. I was asking why would he flash this kernel instead of Francisco's on void#forever.
devlin2427 said:
I'm afraid you didn't understand my question. I was asking why would he flash this kernel instead of Francisco's on void#forever.
Click to expand...
Click to collapse
ya you can use franco's kernel on any custom ROM other then those which are built from official 2.3.3
doktornotor said:
Yes, of course.
Click to expand...
Click to collapse
No. kernels have nothing to do with baseband. I flashed on v20g and its improved performance and another guy flashed on void forever and it improved performance.
Features:
Kernel version: 2.6.35.14
'autogroup' scheduling feature: automated per session task groups info
I/O schedulers :
BFQ v2 r1 - Default
CFQ - Updated here and there a good second choice plays nicely with autogroup
VR
SIO
(both are quite fast and stable but do not benefit from autogroup)
NOOP
DEADLINE
(haven't tried them much)
RCU: TREE_RCU (tired others but they seam much slower)
Kernel image compressed with XZ (LZMA2)
Yaffs2 updated to the Jan7 Version from mainstream (not sure what HTC used but it wasn't even the one from AOSP, was an older one)
Squashfs updated with XZ/ZLIB/LZO & xattr fixes
RAMZSWAP has been replaced with ZRAM from kernel 3.0 also this is built as module in my release
Plus all the nice things bananacakes pushed on he's github tree
THERE IS NO OC,UC, UV, OV, VDD, SVS...FBI, CIA etc.
245000-998400 - scaling.
GUV: ONDEMAND - (default) this is all we really need
also included: PERFORMANCE, POWERSAVE, USERSPACE
I included all the useful modules, like TUN, Cifs, NFS, ZRAM, Aufs
Background:
This kernel is based on the bravo_2.6.35_gb-mr HTC release.
I pick up A LOT of commits from bananacakes' Kernel and a fix from theGanymedes.
Ofc some of the fixes bananacakes uploaded and i used are based on other peoples contribution for full credits check out he's kernel source.
My source here. All the things i changed can be found on other branches of my github kernel...i take no credit for this features, its just like combing a Puzzle Game
Downloads: Small pack* (under 1mb on system) | full pack squashed (4mb) | full pack (12mb)
*only the tun, zram, zlib modules are included in the small pack
Extra's :
10% zram script
adb remount
adb push 90zram /system/etc/init.d/90zram
adb shell
busybox chmod a+x /system/etc/init.d/90zram
sync
reboot
Changelog:
-took out HTC PERFLOCK as i don't think it was working that well
Bench's:
no OC, a2sdext, 10% zram, BFQ|ONDEMAND
Quadrant:
Total 1016
CPU 1938
Mem 1103
I/O 1153
2D 300
3D 587
AnTuTu:
Total 2590
CPU integer 677
CPU float-point 285
DB IO: 255
SD write 6,6 mb/s
SD read 11,4 mb/s
2D 299
3D 580
CF Bench
Native score 4111
Java score 1388
Overall score 2477
Linpack
Single Thread: 35,4 MFLOPS, Time 2.3s, Norm Res 5.68, Precision 2.220446049250313E-16
Multi Thread: 32,2 MFLOPS, Time 5.24s, Normal Res 3.24, Precision 2.220446049250313E-16
U are BIG 1
THX for this TOP kernel
R2ZM4.2 GLE
Build-Nr.
GRJ90
Thanks, hope you'll look into some ICS kernel development as well since I just crossed the fence.
Thank you i will try it now
Sent from my HTC Desire using Tapatalk 2
Rom RSK 7.4.2 wifi not working
Sorry my bad english
Htc Desire & RSK TEAM V7.4
linar10 said:
Rom RSK 7.4.2 wifi not working
Sorry my bad english
Htc Desire & RSK TEAM V7.4
Click to expand...
Click to collapse
It is, but i guess you didn't have enough room on /system for all the modules. just delete what's in /system/lib/modules and only add the bcm in there.
uploaded a new pack since i forgot something in conf last time.
I looked and saw that you haven't compiled the modules into the kernel.
First question is why because it would've consumed space.
Second question is if this kernel has ext4 support compiled in it. I haven't seen the fs module for that.
Thanks.
--
edit: one more thing. Undervolt (UV) should be in the original kernel also, since lower operating frequencies wouldn't play much role. I hope yours still has it
EXT4 is builtin and it also handels ext2 and ext3, as is squash.
Its pretty obvious why i didn't built in all the modules, they wouldn't fit the boot partition...also they would eat RAM and its quite unlikely one would need them all at the same time. So ZRAM, TUN etc can be loaded via modprobe/insmod.
teorouge said:
Thanks, hope you'll look into some ICS kernel development as well since I just crossed the fence.
Click to expand...
Click to collapse
There are no ICS Sense Roms so i don't really think that will happen ><
oh yes there are
Sorry, but will this kernel work on runnyrom? And what package to download?
depends how much room there is on the /system, the small pack should work on all roms though.
I have cm7r2 hboot. So what's your recommendations?
Its work perfect on RSK rom.
But GPU is less than snq and droidzone kernal
Sent from my HTC Desire using Tapatalk 2
What about the battfix of theGanymedes? Is it included? Can't see it on the first post.
i stated i picked he's fix.
roalex said:
i stated i picked he's fix.
Click to expand...
Click to collapse
Ahh sorry... shouldn't read so fast
what is the difference between your HTC-Kernel-Bravo-GB branch and COS-Bravo-GB-Kernel branch? i want to recompile and test it with my bravoc.
agismaniax said:
what is the difference between your HTC-Kernel-Bravo-GB branch and COS-Bravo-GB-Kernel branch? i want to recompile and test it with my bravoc.
Click to expand...
Click to collapse
The first is a Sense kernel(this one) the other is a AOSP kernel (is pretty much tiamat's Gb kernel"
roalex said:
The first is a Sense kernel(this one) the other is a AOSP kernel (is pretty much tiamat's Gb kernel"
Click to expand...
Click to collapse
what toolchains do you use to compile them?
RCMix / XxXPachaXxX
This is a flashable pack created for the setup of all sense 4 roms for a perfect user friendly experience. It works on speed/smoothness/touch-resposiveness improvements and will give you a more "touchable" touch interface and general phone.
See the content of the pack before flash!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Content:
Ken's Kernel (klquicksall RCMix v5.5)
init.d script for sheduler, RAM and kernel setup
TakeCONTROL MOD, special version for this pack!
Qualcomm Init scripts for boot setups (tnx codeaurora)
EGL Libs with correct configuration (tnx codeaurora)
Cy8c touchscreen driver settings
General synaptic driver settings perfectly fitted to sensation touch panel
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Notes:
The major parts of the code are copyright of CodeAurora - 2010/2011/2012
Standards touch calibration values are derived from empirical measurements to fit standars; Calibration values for pyramid are derived from personal work on physical measurements with a raw width field of 1 unit corresponding physically to 17mm of linear size on the touchscreen.
To grant a more userfriendly touch experiance i changed the normal pressure scale values. The purpose is to generate a valid touch signal also on a light touch. The result is the perception of a lighter and soft touch in the general phone use.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Pack DOWNLOAD (Dev-Host) : LINK
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Remember: W the community!
Thx )
Sent from my HTC Sensation using xda premium
give a try tomorrow
THX XxXPachaXxX ..
To download, testing,,,
thanks .. now download and give it a try
Maybe it would be good to write in the OP, that ppl that already flashed a current version of bricked kernel have to put mpdecision and thermald back in place, else they would not have any core and thermal management (the compatibility.sh adresses only renamed binaries ...).
Additionally i noticed that in your "init.qcom.mdm_links.sh" there is a line: "mount -t ext4 -o remount,ro,barrier=0 /dev/block/mmcblk0p12 /system". In this situation it won´t get applied but the system partition on pyramid is mmcblk0p22 (not 12), only as information.
I would like to know which changes are meant by "boot setup" and which exact version of EGL libs are included here.
But the reason i actually looked at the package is because of the touch screen configuration, in which file exactly the values are included? I really would like to change them by myself!
In my understanding it doesn't do sweep to wake?
hlenforcer said:
Maybe it would be good to write in the OP, that ppl that already flashed a current version of bricked kernel have to put mpdecision and thermald back in place, else they would not have any core and thermal management (the compatibility.sh adresses only renamed binaries ...).
Additionally i noticed that in your "init.qcom.mdm_links.sh" there is a line: "mount -t ext4 -o remount,ro,barrier=0 /dev/block/mmcblk0p12 /system". In this situation it won´t get applied but the system partition on pyramid is mmcblk0p22 (not 12), only as information.
I would like to know which changes are meant by "boot setup" and which exact version of EGL libs are included here.
But the reason i actually looked at the package is because of the touch screen configuration, in which file exactly the values are included? I really would like to change them by myself!
Click to expand...
Click to collapse
1) the pack automatically restore the mpdecision and thermald daemons
2) the qcom mdm don't refers to system partition!
3) for the EGL version, it's different in the files, you can use opengl extension app in the market to check the version of the lib that u are talking
4) all the touch and iput settings files are in the usr directory
calyxim said:
In my understanding it doesn't do sweep to wake?
Click to expand...
Click to collapse
s2w is included in rcmix kernel
Let's improve our Sensation.
Thx bro
Downloading now
Sent from my HTC Sensation 4G using xda premium
Testing now!
Flashed it after a clean installation of Pkmn
Feedback later
MarciWoi said:
Testing now!
Flashed it after a clean installation of Pkmn
Feedback later
Click to expand...
Click to collapse
Do you have s2w by default or is this using Aroma and you can choose?
XxXPachaXxX said:
1) the pack automatically restore the mpdecision and thermald daemons
Click to expand...
Click to collapse
ah ok that was my fault, i thought the bricked installer script would delete them totally instead of renaming them, they are missing completely only on aosp roms ...
2) the qcom mdm don't refers to system partition!
Click to expand...
Click to collapse
yeah but somehow irritating that it gets mounted to a directory named system ...
3) for the EGL version, it's different in the files, you can use opengl extension app in the market to check the version of the lib that u are talking
Click to expand...
Click to collapse
i know but i thought you could tell me by heart if it is 213, 218 or something newer
4) all the touch and iput settings files are in the usr directory
Click to expand...
Click to collapse
ah cool, did not look into the file cause i thought it would be binaries hehe
so thx for your fast response! :cyclops:
btw, i bet in the next 2 pages there will appear ppl ranting about the unavailability of the information where to find kernel source (the gpl thing), only a hint after watching how it goes at xda hehe
dwcasey said:
Do you have s2w by default or is this using Aroma and you can choose?
Click to expand...
Click to collapse
I think it´s default :good:
hlenforcer said:
btw, i bet in the next 2 pages there will appear ppl ranting about the unavailability of the information where to find kernel source (the gpl thing), only a hint after watching how it goes at xda hehe
Click to expand...
Click to collapse
+1
So little information. As I can understand from the first line - there is a whole kernel in this package? Where I can find information on this kernel? What is the battery consumption after this package installation?
hlenforcer said:
ah ok that was my fault, i thought the bricked installer script would delete them totally instead of renaming them, they are missing completely only on aosp roms ...
yeah but somehow irritating that it gets mounted to a directory named system ...
i know but i thought you could tell me by heart if it is 213, 218 or something newer
ah cool, did not look into the file cause i thought it would be binaries hehe
so thx for your fast response! :cyclops:
btw, i bet in the next 2 pages there will appear ppl ranting about the unavailability of the information where to find kernel source (the gpl thing), only a hint after watching how it goes at xda hehe
Click to expand...
Click to collapse
No problem with kernel because it's the ken's rcmix kernel v5.5
MarciWoi said:
I think it´s default :good:
Click to expand...
Click to collapse
yes, default
Zer0r said:
+1
So little information. As I can understand from the first line - there is a whole kernel in this package? Where I can find information on this kernel? What is the battery consumption after this package installation?
Click to expand...
Click to collapse
The kernel is RCMix v5.5, for more information you can refer to my thread on xda or the klquicksall's thread on acsyndicate
+1 sounds good and all...really thanks OP for your contribution....but I do not want to go thru renaming mpdecision and thermald as I have NO clue how to do so...MOD sounds AWESOME..I however lack the knowledge to use it limits me
Sent from my HTC Sensation 4G using xda premium
Any feedback? i'm doing other tests and if i will get better results i will update the pack
Would flashing the newest Faux kernel after installing this defeat the porpuse of this mod ?
I would rather not have S2W.
Thanks.