connection problem of polaris 100 android with windows 7 - Touch Cruise Android Development

can somebody help me with this problem?
windows installed 3 drivers but the last one failed and now tell me that dose not recognize the device and to try to change the usb port to something faster..but still nothing after uninstal..restart the phone and the PC..can somebody tel me what to to exactly?
thanks in advance...

same problem..

same problem.

which kernel?

l1q1d said:
which kernel?
Click to expand...
Click to collapse
Install Dual Mount SD Widget for a stable USB connection.

Related

stuck in bootloader,can't connect to usb

i've just bought a kaiser from ebay. it worked for a few days until i decided to instal wm 6.5 on it. but i couldn't go that far. what i did: i've flashed a new radio on it, it worked fine. the next step that i wanted to take was to hardspl my kaiser but it didn't worked because i couldn't connect it to my laptop or my computer. i have windows 7 on both of them.
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Stuck_at_bootloader --> 1 and 2 steps didn't work because of the same problem, i can't connect the phone through usb.
how can i fix this?
in bootloader is on serial and when i plugin the usb cable it changes to usb and it starts charging. what can i do? except to try from win xp.
costyg said:
in bootloader is on serial and when i plugin the usb cable it changes to usb and it starts charging. what can i do? except to try from win xp.
Click to expand...
Click to collapse
Try this page, Bro: http://forum.xda-developers.com/showthread.php?p=3932827#post3932827
Goodluck.
drTaruna said:
Try this page, Bro: http://forum.xda-developers.com/showthread.php?p=3932827#post3932827
Goodluck.
Click to expand...
Click to collapse
Thank you but it doesn't work. I can't view my mobile in device manager so i can't update drivers. when i connect my mobile it says usb device not recognized, and i go in device manager and i try to update the drivers from the unknown device but it doesn't work.
is there another way to try to boot? without conecting the phone to the computer. can i use my micro sd card to do that? i think it doesn't work because i unchecked 'Allow usb connection' in device manager, and after that it's only in bootloader mode. it doesn't work if i check allow usb connection.
how can i do a hard reset? would that help?
now it works! i've just connected to other usb port. strange because yesterday i tried this thing without succes. but i still can't connect it to usb. i get this error: "The device cannot start. (Code 10)" it worked before with windows device center. what can i do to connect it to usb? is it safe to hardspl my phone from win 7?
On older pc's the front usb ports aren't always usb 2.0. A hard reset won't help you at this time. Unplug all your usb devices currently attached to your pc. Restart. Plug in your kaiser cable to a back port on the motherboard. Make sure in task manager, that all windows media device center entries are closed.
Does it still give a code 10 error after doing all this? If so then delete the USB host controller entries in device manager. Click start button in win 7 and type "device manager". Hit enter. Open up USB controllers tree. Right click and uninstall all host controllers. Reboot. Let it redetect everything. Now plugin your phone cable. If still getting code 10 error then you are either using a faulty usb cable or the wrong type of cable (usb 1 instead of 2).
costyg said:
now it works! i've just connected to other usb port. strange because yesterday i tried this thing without succes. but i still can't connect it to usb. i get this error: "The device cannot start. (Code 10)" it worked before with windows device center. what can i do to connect it to usb? is it safe to hardspl my phone from win 7?
Click to expand...
Click to collapse
Have you downgrade the driver with the attached one? And if we used 64bit system we should disable the driver enforcement as suggested.
It is wise to hardspl from XP if all the effort from win7 failed. Once it's done we could flash new rom through SD card.
stuntdouble said:
On older pc's the front usb ports aren't always usb 2.0. A hard reset won't help you at this time. Unplug all your usb devices currently attached to your pc. Restart. Plug in your kaiser cable to a back port on the motherboard. Make sure in task manager, that all windows media device center entries are closed.
Does it still give a code 10 error after doing all this? If so then delete the USB host controller entries in device manager. Click start button in win 7 and type "device manager". Hit enter. Open up USB controllers tree. Right click and uninstall all host controllers. Reboot. Let it redetect everything. Now plugin your phone cable. If still getting code 10 error then you are either using a faulty usb cable or the wrong type of cable (usb 1 instead of 2).
Click to expand...
Click to collapse
i've installed win xp and i couldn't sync it so it's not a problem with the usb ports on the computer. the usb cable is fine. a few days ago i could sync the device with the same usb cable. now it's showing that is charging so it shouldn't be a cable problem.
drTaruna said:
Have you downgrade the driver with the attached one? And if we used 64bit system we should disable the driver enforcement as suggested.
It is wise to hardspl from XP if all the effort from win7 failed. Once it's done we could flash new rom through SD card.
Click to expand...
Click to collapse
no, i didn't do anything. it just worked. i did a reset and it passed the bootloader, it wasn't the first reset, it was strange but it worked. now i made a change on my device: start->settings->connections->usb to pc->and i unticked the 'enable advanced network functionality'. with this option i see "mobile devices->htc usb" sync in device manager but still i can't sync it. what can i do?
could this be related to the radio i've flashed? here is the rom and radio that i have. i don't know what radio i had before.
costyg said:
i've installed win xp and i couldn't sync it so it's not a problem with the usb ports on the computer. the usb cable is fine. a few days ago i could sync the device with the same usb cable. now it's showing that is charging so it shouldn't be a cable problem.
no, i didn't do anything. it just worked. i did a reset and it passed the bootloader, it wasn't the first reset, it was strange but it worked. now i made a change on my device: start->settings->connections->usb to pc->and i unticked the 'enable advanced network functionality'. with this option i see "mobile devices->htc usb" sync in device manager but still i can't sync it. what can i do?
Click to expand...
Click to collapse
We should downgrade the driver with the one attached in the linked site above and do as suggested, or the pc won't recognize the device in bootloader. Pls read and do as suggested. It won't spent more than 10 minutes to try.
drTaruna said:
We should downgrade the driver with the one attached in the linked site above and do as suggested, or the pc won't recognize the device in bootloader. Pls read and do as suggested. It won't spent more than 10 minutes to try.
Click to expand...
Click to collapse
well the device it's not in bootloader anymore. now the problem is that i can't connect it to the computer through usb. which radio would be good for my rom? radio is the problem?
So you are no longer getting the code 10 error, now you have installed XP?
costyg said:
could this be related to the radio i've flashed? here is the rom and radio that i have. i don't know what radio i had before.
Click to expand...
Click to collapse
Failure to connect with pc is not related to the radio rom. Ur radiorom is alright. The latest one is 1.71.09.01. It give a little possitive change in connection performance in GPRS/3G and GPS and change in battery drain depend on the signal in our country. Unmatched radiorom may cause bad signal and bad battery drain. Sometimes the camera will fail to start. U could search for the topic later. Goodluck.
costyg said:
well the device it's not in bootloader anymore. now the problem is that i can't connect it to the computer through usb. which radio would be good for my rom? radio is the problem?
Click to expand...
Click to collapse
We SHOULD download this driver: http://forum.xda-developers.com/attachment.php?attachmentid=194418&d=1244659513 and installed them to our PC (not ppc) as suggested HERE: http://forum.xda-developers.com/showthread.php?p=3932827#post3932827 !!!
The mean of this is to DOWNGRADE the wceusbsh.sys of Win7 or Vista so it could connect to the ppc through bootloader.
If u fail to force ur device to bootloader through hardbutton, try to copy and unzip the attached file (enterbootloader.exe) into ur sd-card through the cardreader and run.
stuntdouble said:
So you are no longer getting the code 10 error, now you have installed XP?
Click to expand...
Click to collapse
no, i don't get the code 10 error anymore but its still not working. there's an exclamation point on windows mobile based device.
drTaruna said:
Failure to connect with pc is not related to the radio rom. Ur radiorom is alright. The latest one is 1.71.09.01. It give a little possitive change in connection performance in GPRS/3G and GPS and change in battery drain depend on the signal in our country. Unmatched radiorom may cause bad signal and bad battery drain. Sometimes the camera will fail to start. U could search for the topic later. Goodluck.
Click to expand...
Click to collapse
thank you. i don't what to do. i wanted to make a upgrade to wm 6.5 but if i can't sync my mobile. it's good that i'm not stuck in bootloader anymore.
if i couldn't sync my mobile after a fresh install of win xp with active sync 4.5, what can i do? the cable is fine, the mobile wasn't damaged.
costyg said:
no, i don't get the code 10 error anymore but its still not working. there's an exclamation point on windows mobile based device.
thank you. i don't what to do. i wanted to make a upgrade to wm 6.5 but if i can't sync my mobile. it's good that i'm not stuck in bootloader anymore.
if i couldn't sync my mobile after a fresh install of win xp with active sync 4.5, what can i do? the cable is fine, the mobile wasn't damaged.
Click to expand...
Click to collapse
Here is the guide for upgrading our device: http://forum.xda-developers.com/showthread.php?t=433835
Follow the suggestion carefully after a careful reading. Goodluck.
drTaruna said:
Here is the guide for upgrading our device: http://forum.xda-developers.com/showthread.php?t=433835
Follow the suggestion carefully after a careful reading. Goodluck.
Click to expand...
Click to collapse
i know the guide but i can't apply it because i can't hardspl my phone. that's why i want to fix the sync problem.
costyg said:
i know the guide but i can't apply it because i can't hardspl my phone. that's why i want to fix the sync problem.
Click to expand...
Click to collapse
OK, post #14 is a guide if u use vista or Win7. Goodluck with XP and activesync 4.5
drTaruna said:
OK, post #14 is a guide if u use vista or Win7. Goodluck with XP and activesync 4.5
Click to expand...
Click to collapse
thank you, i hope i will fix it.

[Q] Need original kernel for I8262

My phone dosn't connect to the pc and doesn't charge... it begins charging after a lot of attempts (remove the battery and charge with the phone off) maybe is the kernel. So can anyone give me a link ?
iliduka said:
My phone dosn't connect to the pc and doesn't charge... it begins charging after a lot of attempts (remove the battery and charge with the phone off) maybe is the kernel. So can anyone give me a link ?
Click to expand...
Click to collapse
Galaxy Core GT-I8262 Original Kernel [Download]
Hope that can help you in your problem
Regards,
ehab.ali said:
Galaxy Core GT-I8262 Original Kernel [Download]
Hope that can help you in your problem
Regards,
Click to expand...
Click to collapse
did't work but thanks
iliduka said:
did't work but thanks
Click to expand...
Click to collapse
kernel didn't work or your problem not solved ? cuz i've tried the file before upload it for you
ehab.ali said:
kernel didn't work or your problem not solved ? cuz i've tried the file before upload it for you
Click to expand...
Click to collapse
kernel worked but it's the same problem
iliduka said:
kernel worked but it's the same problem
Click to expand...
Click to collapse
witch rom you are using
did you try connect your phone to another pc and it gives the same problem
i was have the same problem with my old device it can connect to home pc cannot connect to work pc i tried to remove the samsung driver and install the perfect one for my device and in the end when i install a new windows it all works and till now i don't know what was the problem
i don't know if youre problem like my old one
but try to remove the driver and install it again
just try and i hope it solved
Samsung CORE USB Driver [Download]
ehab.ali said:
witch rom you are using
did you try connect your phone to another pc and it gives the same problem
i was have the same problem with my old device it can connect to home pc cannot connect to work pc i tried to remove the samsung driver and install the perfect one for my device and in the end when i install a new windows it all works and till now i don't know what was the problem
i don't know if youre problem like my old one
but try to remove the driver and install it again
just try and i hope it solved
Samsung CORE USB Driver [Download]
Click to expand...
Click to collapse
today is working but.... sometimes it works sometimes not.. in the past couple of days it barely connected after a lot of attempts

[Q] Samsung GT-i8552B Bricked - Driver Problem

I'm posting here because I cound't find my device on the forum...
The problem is: My device has a custom ROM installed but I don't know why after I rebooting it just keeps going to CWM Recovery... I've tried to reboot, install different room but it keeps going to CWM Recovery everytime.
So I've tried recovering through Odin, but my PC can't install USB Composite Device CDC driver... I've tried reinstalling Samsung Kies and Samsung Kies 3, rebooting the PC, Windows Update, installing drivers pack... Stills don't installing the driver...
I've tried to different PCs (Windows 7 x64 and Windows 8.1 x64)...
Someone could please help me with these drivers to recovery my phone?! :crying::crying::crying::crying:
I've tried a lot of suggetions provided on posts and discussions, but untill now I had no luck...
hawkbraz said:
I'm posting here because I cound't find my device on the forum...
The problem is: My device has a custom ROM installed but I don't know why after I rebooting it just keeps going to CWM Recovery... I've tried to reboot, install different room but it keeps going to CWM Recovery everytime.
So I've tried recovering through Odin, but my PC can't install USB Composite Device CDC driver... I've tried reinstalling Samsung Kies and Samsung Kies 3, rebooting the PC, Windows Update, installing drivers pack... Stills don't installing the driver...
I've tried to different PCs (Windows 7 x64 and Windows 8.1 x64)...
Someone could please help me with these drivers to recovery my phone?! :crying::crying::crying::crying:
I've tried a lot of suggetions provided on posts and discussions, but untill now I had no luck...
Click to expand...
Click to collapse
Find your ROM from here: http://www.sammobile.com/firmwares/ and restock. Before that get these USB drivers: http://www.usb-drivers.org/samsung-mobile-phone-usb-driver.html
Sent from my HP Slate 7 using XDA Free mobile app
xazakasrizava said:
Find your ROM from here: http://www.sammobile.com/firmwares/ and restock. Before that get these USB drivers: http://www.usb-drivers.org/samsung-mobile-phone-usb-driver.html
Sent from my HP Slate 7 using XDA Free mobile app
Click to expand...
Click to collapse
No Lucky.... Stills the same problem....
I've downloaded:
UPDATE: FEBRUARY 2015
SAMSUNG Android USB Device Driver
But The CDC driver stills with problem... Another tip? :crying:
hawkbraz said:
No Lucky.... Stills the same problem....
I've downloaded:
UPDATE: FEBRUARY 2015
SAMSUNG Android USB Device Driver
But The CDC driver stills with problem... Another tip? :crying:
Click to expand...
Click to collapse
You're in luck I have some Samsung USB drivers already downloaded. Give me your email so I can send them!
When in doubt, hit thanks...
xazakasrizava said:
You're in luck I have some Samsung USB drivers already downloaded. Give me your email so I can send them!
When in doubt, hit thanks...
Click to expand...
Click to collapse
I don't know how, but I did it work !!!
Thank you for your tips, it was very helpful...
hawkbraz said:
I don't know how, but I did it work !!!
Thank you for your tips, it was very helpful...
Click to expand...
Click to collapse
Oh, ok good for you!
When in doubt, hit thanks...
Driver problem
Could provide for me too these drivers? I am having the same problem the friend up there.
caique-17silva said:
Could provide for me too these drivers? I am having the same problem the friend up there.
Click to expand...
Click to collapse
http://developer.samsung.com/technical-doc/view.do?v=T000000117 Here ya go
Odin does not recognize and the driver is that way ... and my phone every time I turn on the same goes for the cwm recovery ... would somehow help me?
caique-17silva said:
Odin does not recognize and the driver is that way ... and my phone every time I turn on the same goes for the cwm recovery ... would somehow help me?
Click to expand...
Click to collapse
Look up on Google, GT-i8552b drivers and something should come up.

z5 dont connect to pc help

my z5 dont connect to pc after root
i dont able to transfer my data to my phone
my pc dont detect my phone in any way
plz help me
Are you running a custom kernel? You could try AndroPlus Kernel and see if that fixes it.
You could try to manually install drivers from the Sony website.
Only adb connecting
Tried manually driver installation not working
Maybe you need to turn off usb debugging.
Windows 10 ? I had the same issue after a windows update. I've solved it with installing Media Feature Pack for windows 10 (KB3099229)
Olivier06700 said:
Windows 10 ? I had the same issue after a windows update. I've solved it with installing Media Feature Pack for windows 10 (KB3099229)
Click to expand...
Click to collapse
Yes windows 10
rajdeep312 said:
Yes windows 10
Click to expand...
Click to collapse
So I think you have the solution.
Olivier06700 said:
So I think you have the solution.
Click to expand...
Click to collapse
Not connecting to pc after installing this
And not. Connect to any pc
It has never worked or just after a reboot ?
Maybe update twrp recovery.
If this doesn't work you have to flash ftf using flashtool and i think u can choose not to wipe your data.
Olivier06700 said:
It has never worked or just after a reboot ?
Click to expand...
Click to collapse
Never works
Ok sorry, me, it had stopped working after a windows update
I reverted my laptop back to factory firmware as every time windows updates it always breaks stuff
Sent from my Xperia Z5 using XDA Labs
Info
rajdeep312 said:
my z5 dont connect to pc after root
i dont able to transfer my data to my phone
my pc dont detect my phone in any way
plz help me
Click to expand...
Click to collapse
you need to download Android Device USB Driver
Go To Control Panel\Hardware and Sound\Devices and Printers
then Select Device & Properties > Select Update Driver
then select update from computer and redirect to Driver folder
:good:
Geeks Empire said:
you need to download Android Device USB Driver
Go To Control Panel\Hardware and Sound\Devices and Printers
then Select Device & Properties > Select Update Driver
then select update from computer and redirect to Driver folder
:good:
Click to expand...
Click to collapse
Already try
Solved now pc detect my z5
Thanks to all
rajdeep312 said:
Solved now pc detect my z5
Thanks to all
Click to expand...
Click to collapse
How did you solve it so anyone else with the same problem will know how to fix it?
gm007 said:
How did you solve it so anyone else with the same problem will know how to fix it?
Click to expand...
Click to collapse
In recovery just mount usb

HTC U11 Files Transfer Issues

Hello guys,
I am facing an issue with my HTC U11 USA Factory Unlocked-64GB.
The issue is that whenever I connect my phone to the computer and when I try to transfer data between the PC on PHONE it always gives me this error "The attached device is not functioning".
FYI, I can access everything on the mobile through the PC but can't transfer anything.
I tried on windows 10, 8 and even 7 and I get same error on all of them, please anyone has a solution for this just help me how to fix it.
Also, my Mobile was on stock ROM and now on custom ROM >> LeeDroid V2 and same error on both ROMs.
Thanks in advance.
M0EMEN said:
Hello guys,
I am facing an issue with my HTC U11 USA Factory Unlocked-64GB.
The issue is that whenever I connect my phone to the computer and when I try to transfer data between the PC on PHONE it always gives me this error "The attached device is not functioning".
FYI, I can access everything on the mobile through the PC but can't transfer anything.
I tried on windows 10, 8 and even 7 and I get same error on all of them, please anyone has a solution for this just help me how to fix it.
Also, my Mobile was on stock ROM and now on custom ROM >> LeeDroid V2 and same error on both ROMs.
Thanks in advance.
Click to expand...
Click to collapse
Try to install HTC drivers or HTC sync.
Check before that no other USB HTC drivers are installed
aferende said:
Try to install HTC drivers or HTC sync.
Check before that no other USB HTC drivers are installed
Click to expand...
Click to collapse
Thanks sir for your concern, I think I figured out how to transfer or copy the backup from android device to PC.
I thought earlier that it could be done by simple copy and paste but I was wrong as it should be done through ADB and by typing a special command and the phone should be booted into TWRP's recovery mode
Anyways, thanks for your reply and hope that could help anyone else with the same issue.

Categories

Resources