Database Info

Huawei ideos (u8150) drivers??

I've got a Huawei u8150 which I just rooted using z4root. Now I'm trying to put it into recovery mode using ultrajackrecovery but when I put it off then put it back on while holding the volume down and end key and connect it to my PC, it says Android 1.0 driver not found. PS. USB debugging is turned on. I need help in finding the right drivers and I'm using a windows 7 64bit pc. Thanks!
Sent from my Ideos using XDA App

Also when I open ultra Jack recovery, it just says "waiting for device".
Sent from my Ideos using XDA App

jstifler said:
I've got a Huawei u8150 which I just rooted using z4root. Now I'm trying to put it into recovery mode using ultrajackrecovery but when I put it off then put it back on while holding the volume down and end key and connect it to my PC, it says Android 1.0 driver not found. PS. USB debugging is turned on. I need help in finding the right drivers and I'm using a windows 7 64bit pc. Thanks!
Sent from my Ideos using XDA App
Click to expand...
Click to collapse
first of all install adb drivers...they are located at the cdrom partition of the device...when you connect it it should appear...then install those drivers...and boot into bootloader mode(redkey+vol down+power)....then manually install the android bootloader from the device manager...or intall pdanet on the computer and it will automatically install everything

i've done that and it was able to install some drivers when the phone was on. then i put it back off and tried restarting it using vol down and the end key but when it comes on, it still says android 1.0 driver not installed. and ultra jack recovery is also not recognizing it. i think it will after the android 1.0 driver has been installed but i cant find it.

manually install the driver!
right click computer,propeties,device manager..
look for android 1.0
double click it..
reinstall driver..
manually select driver..
look for android devices.
select android bootloader interface and install it.
it WILL work..
(i had the same problem)

THANKS MAN! IT WORKED!! now that im done with this, which rom would you suggest i install?? there's a lot all over and im confused about which one to go with.

maury1234 said:
manually install the driver!
right click computer,propeties,device manager..
look for android 1.0
double click it..
reinstall driver..
manually select driver..
look for android devices.
select android bootloader interface and install it.
it WILL work..
(i had the same problem)
Click to expand...
Click to collapse
thumbs up, thanks man, it worked for me tooo

cknaveed said:
thumbs up, thanks man, it worked for me tooo
Click to expand...
Click to collapse
thanks man, i have the same problem and ive searched the site and it lead me to your post... thanks! problem solved! =)

this doesnt work.
the computer cant find the drivers no matter what.
can you help me out and find me the drivers for it?
thanks.

when I plug in my U8150 I don't get the cd partition anymore I had it before but I disappeared suddenly... How can I get it back? I want to install the ADB drivers.
Thank you

TimG83 said:
when I plug in my U8150 I don't get the cd partition anymore I had it before but I disappeared suddenly... How can I get it back? I want to install the ADB drivers.
Thank you
Click to expand...
Click to collapse
This will solve your problem:
http://forum.xda-developers.com/showthread.php?t=995066

Trekker56 said:
This will solve your problem:
http://forum.xda-developers.com/showthread.php?t=995066
Click to expand...
Click to collapse
Great!!! Solved it indeed thank you!

finally solved...
great!!!!

[Q] Odin can't find my device.

Hello.
I have a problem. As I turn my phone to download mode and connect with my ntb odin does not show COM number. I've tried all I find but my problem isn't solved yet.

Make sure u have installed kies..odin requires drivers from kies
Press thanks if I have helped
Sent from my GT-I9003 using XDA

Make sure drivers are installed. It not try changing USB ports or restarting your computer
Cheers
Sent from my GT-i9003 powered by Stable and Smooth CyanogenMod 9!

Re:
Okay, this solved my problem. Now I have one more quesion: I want to install MIUI rom in CWM but I don't know how.

zuffik said:
Okay, this solved my problem. Now I have one more quesion: I want to install MIUI rom in CWM but I don't know how.
Click to expand...
Click to collapse
go find it in development section, find the miui u want and read the whole thread before try to flash it, or u will regrat
the thread will have step by step how to flash.

help
I am facing the same problem. Please help me with how to fix this kies?how can i fix the kies drivers in phone and pc? Thanks in advance

shazeem said:
I am facing the same problem. Please help me with how to fix this kies?how can i fix the kies drivers in phone and pc? Thanks in advance
Click to expand...
Click to collapse
There's nothing to do with your phone. Go to your local Samsung website and download the latest kies software. It will be a little bit harshly and there will be blood.
When you plug your phone your usb suit will setup your drivers. By the way I'm talking for windows.

kamilien said:
There's nothing to do with your phone. Go to your local Samsung website and download the latest kies software. It will be a little bit harshly and there will be blood.
When you plug your phone your usb suit will setup your drivers. By the way I'm talking for windows.
Click to expand...
Click to collapse
Kies just stopped working

reboot your pc

yeyeki said:
reboot your pc
Click to expand...
Click to collapse
Rebooted maybe because my ultrabook's x64

panpjp said:
Rebooted maybe because my ultrabook's x64
Click to expand...
Click to collapse
Do you try to reinstall the kies?
we should try something stupid

Problem with USB ????

Hello everyone
I need your help:
My tf101g running ICS 9.2.2.6 is not recognized by the pc ( tried 2 computers ) , it gives me unknown device!!!!! I formatted it but still not recognized.
Any Idea ?
Also i was wondering if possible to restore SU through ota rootkeeper ! If yes, Can someone upload a backup ?
Thanks In Advance
Sent from my Transformer TF101G using Tapatalk 2

Up up up.
Sent from my Transformer TF101G using Tapatalk 2

Have to tried manually installing drivers?

Solar.Plexus said:
Have to tried manually installing drivers?
Click to expand...
Click to collapse
Thanks
Tried but no luck .

hearts king101 said:
Thanks
Tried but no luck .
Click to expand...
Click to collapse
You sure? Which ones did you try?

I tried the one available in Asus official website.
Sent from my Transformer TF101G using Tapatalk 2

You could try these drivers here. If nothing else, you can use ADB to transfer files, if that's your main concern.

Solar.Plexus said:
You could try these drivers here. If nothing else, you can use ADB to transfer files, if that's your main concern.
Click to expand...
Click to collapse
Already tried but I don't know why my PC cant recognize my TF, it gives me UNKNOWN. and regarding ADB, that's what i want so that i can root my device.
Thanks :highfive:

It says "unknown device" after you installed those drivers?

Solar.Plexus said:
It says "unknown device" after you installed those drivers?
Click to expand...
Click to collapse
unknown device > try to update the driver > FAIL
FYI: The issue occurred on 2 different computers with 2 different OSs .

In which section of a Windows Device Manager does the unknown device appear?
Sent from my Slider SL101

Solar.Plexus said:
In which section of a Windows Device Manager does the unknown device appear?
Sent from my Slider SL101
Click to expand...
Click to collapse
What do you think ?
And sorry for bothering you

It's no bother, just trying to help out.
Can you try to force install drivers? From the Device Manager, choose to update the driver software -> browse my computer for driver software -> let me pick of a list of device drivers on my computer -> and then choose one of the ones you see. Or even uncheck the compatible hardware box and look for a Generic USB driver. It's a long shot.

Solar.Plexus said:
It's no bother, just trying to help out.
Can you try to force install drivers? From the Device Manager, choose to update the driver software -> browse my computer for driver software -> let me pick of a list of device drivers on my computer -> and then choose one of the ones you see. Or even uncheck the compatible hardware box and look for a Generic USB driver. It's a long shot.
Click to expand...
Click to collapse
It did not work ( It said " the wizard couldn't find a better match for your hardware than software you currently have installed " although when I check for the current installed driver It said ' No driver Installed "
BUT:
I'm going to install a new OS bcuz I have issue with current one and try again but its late now in KSA ( 12 am ) so will do that tomorrow.
Thank you for your kind help. really appreciate that.
See you soon

That's weird. By going through that process, it should force Windows to install the drivers, even if they aren't compatible with the device. Although it's been a long while since I used XP, so I'm not really sure anymore what it's capable of doing.

http://support.asus.com/download.aspx?SLanguage=en&m=Eee+Pad+Transformer+TF101&os=32
the drivers are all right on the asus site nice and handy. install asus sync too.

haxin said:
http://support.asus.com/download.aspx?SLanguage=en&m=Eee+Pad+Transformer+TF101&os=32
the drivers are all right on the asus site nice and handy. install asus sync too.
Click to expand...
Click to collapse
That's not the problem here. OP says the drivers or any others aren't able to be installed to the device.

Solar.Plexus said:
That's not the problem here. OP says the drivers or any others aren't able to be installed to the device.
Click to expand...
Click to collapse
Exactly. Even after installing a fresh copy of XP, the issue persists :silly:
I'll try again and again until I fix the problem OR I break my PC

hearts king101 said:
Exactly. Even after installing a fresh copy of XP, the issue persists :silly:
I'll try again and again until I fix the problem OR I break my PC
Click to expand...
Click to collapse
Hmm.. If it still says unknown device it shouldn't be a problem with the cable, since the computer can at least detect the device being connected.
I'll dig around when I get back home to my PC to see which driver I used to connect successfully.

here. its been a while since i did my tf101 first root, and a while since ive even used a windows computer, but i still had everything left on it. heres a link to the asus sync installer, the android usb drivers, adb, and fastboot executeables, and some other root **** that i cant remember what was for, kernel, and recovery blob i believe. nowmif these drivers dont get your device known on the windows machine then nothing will.
i'm pretty sure the google usb windows driver for adb connections is in there too. if not then you can just download the android-sdk for windows and install it from the <sdk>/extras/google/usb_driver/ directory.
https://www.box.com/shared/oosu8ejuljmlyzp0m677 straight from my box account.

Not connecting galaxy fit on pc

Before instaling creed v4 i able to use it on pc but after instaling creeds v4 my phone is not recogniged by odin all thing working fine its going on cwm mode download mode but odin and pc not recognizing it. I want to install stock rom on it plese help
Sent from my GT-S5670 using xda premium

Try reinstalling drivers.....that should fix it...
Sent from my GT-S5670 using xda premium

Install the prev. rom again to see that everything is back to normal or else..., re-install ur drivers, but first, remove the old drivers.
Hope this helps...!!!
Sent Via XDA™ Premium

akshaysalunke13 said:
Try reinstalling drivers.....that should fix it...
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
i hv tried this many time but it not connecting to pc or odin but charging is start

Galaxy_Rohit said:
Install the prev. rom again to see that everything is back to normal or else..., re-install ur drivers, but first, remove the old drivers.
Hope this helps...!!!
Sent Via XDA™ Premium
Click to expand...
Click to collapse
how we can install previous rom when my phone is not connecting to pc ,. i re install drivers many time but it dosent work but when i connect other phone then it conect properly and odin also connect

ashishjha009 said:
i hv tried this many time but it not connecting to pc or odin but charging is start
Click to expand...
Click to collapse
Which OS you have on PC?
Connect your phone with PC and go in Control Panel/Device Manager. If in Device Manager have
yellow question, the right click on it and select automatic update driver. Internet need be connected.

ZmisiS said:
Which OS you have on PC?
Connect your phone with PC and go in Control Panel/Device Manager. If in Device Manager have
yellow question, the right click on it and select automatic update driver. Internet need be connected.
Click to expand...
Click to collapse
nop can do It say: windows has determined the driver software for your device is up to date. Unknown device
I'm using windows 7 x64 and wired tether app on JB

jokerniski said:
nop can do It say: windows has determined the driver software for your device is up to date. Unknown device
I'm using windows 7 x64 and wired tether app on JB
Click to expand...
Click to collapse
Can you open this on PC?
When is phone connection cable with PC in Device Manager need be yellow question mark.
The right click on yellow question mark and select automatic update driver.
When cabel phone connecte with PC for me in Device Manager it is like this.

ZmisiS said:
Can you open this on PC?
When is phone connection cable with PC in Device Manager need be yellow question mark.
The right click on yellow question mark and select automatic update driver.
Click to expand...
Click to collapse
The best driver software for your device is already installed. That's what it says after I go to update driver software. I reinstaled drivers and restart comp after removing and after instaling new ones. But not working....

jokerniski said:
The best driver software for your device is already installed. That's what it says after I go to update driver software. I reinstaled drivers and restart comp after removing and after instaling new ones. But not working....
Click to expand...
Click to collapse
Try to find a driver manually.
This is drivers for me:
Samsung usb driver for mobile phones file version 1.4.103.0 and
Setup for compiled driver disk (android) file version 0.92.00
Try here:
http://forum.xda-developers.com/showthread.php?t=961956

dude listen there is a simple solution
it happened to me too
just go to ur phone and type *#7284# and choose usb uart then do it again and choose usb and then reboot and it will work

I have try many solution, even installed google sdk (don't know why), and can't find a way. A think it is a problem within my win 7 x64 and will reinstall a whole sistem because on my laptop with same system drivers are automatically installed when phone is connected for the first time. Thanks a lot for helping. Will try this and hope to succeed
---------- Post added at 04:30 PM ---------- Previous post was at 04:25 PM ----------
abizerl123 said:
dude listen there is a simple solution
it happened to me too
just go to ur phone and type *#7284# and choose usb uart then do it again and choose usb and then reboot and it will work
Click to expand...
Click to collapse
when I dial that it say: connection problem or invalid MMI code. Running on android 4.1.2
I find a solution. Disconnected from internet windows automatically install drivers for FIT. Strange but it work like a charm without 3rd parity app

abizerl123 said:
dude listen there is a simple solution
it happened to me too
just go to ur phone and type *#7284# and choose usb uart then do it again and choose usb and then reboot and it will work
Click to expand...
Click to collapse
i tried this but this trick failed too

Try installing drivers or install kies or reflash ROM:fingers-crossed:

Different battery bug on Xperia E with TamsuiCM11 by UltraGamerHD

I have a weird battery bug with the TamsuiCM11 from @UltraGamerHD for Xperia E. I know that for some user, their battery display is stuck at 100% and can't charge.
On my device the percetage is correctly displayed and updated but I still can't charge. Neither with the charger nor on a computer. And my computer won't recognise it either, I also can't access its internal storage.
The offline charge doesn't work either. When I turn my Xperia E off and connect it to the charger the phone simply boots up the CM11 without going into the offline charge mode.
It doesn't seem to be a problem with the kernel, since the phone does charge the battery in the recovery mode.
I installed CM11 just like the instruction said. Does anybody have the same problem?
Edit: I just saw that UltraGamerHD relased the alpha 3. I should probably mention that I tried this with Alpha 2 yesterday.

Go to Settings > Storage. Press the Menu button. Select USB connection settings (or whatever it is - it's the only option in the menu), and then tap MTP. Problem solved.

-Install Android terminal emulator
-Open it and type:
echo 08> / sys/devices/i2c-2/2-0034/axp20_reg
[Press enter]
echo 0800> / sys/devices/i2c-2/2-0034/axp20_reg
[Press enter]
-Reboot device
-Discharge and recharge battery
-It will help you
P.S. Sorry for my english

NSDCars5 said:
Go to Settings > Storage. Press the Menu button. Select USB connection settings (or whatever it is - it's the only option in the menu), and then tap MTP. Problem solved.
Click to expand...
Click to collapse
Thanks for the suggestion. I currently don't have CM11 on my Xperia E to test it, but isn't "MTP" already the default setting for it? At least on the stock ROM it is the default. The battery won't charge right from the get-go, immediately after I've flashed.

CharredBrain said:
Thanks for the suggestion. I currently don't have CM11 on my Xperia E to test it, but isn't "MTP" already the default setting for it? At least on the stock ROM it is the default. The battery won't charge right from the get-go, immediately after I've flashed.
Click to expand...
Click to collapse
On CM11, the stock setting is nothing - that is why your phone can't talk to the charger and/or computer.

NSDCars5 said:
Go to Settings > Storage. Press the Menu button. Select USB connection settings (or whatever it is - it's the only option in the menu), and then tap MTP. Problem solved.
Click to expand...
Click to collapse
Hi, I have this problem..I changed it to MTP, but my Xperia E still doesn't connected to my PC. Then I changed it to PTP and Xperia E connected to PC. Can you help me? I hope so and I hope you willl understand my noob english

Tallahassee[CZ] said:
Hi, I have this problem..I changed it to MTP, but my Xperia E still doesn't connected to my PC. Then I changed it to PTP and Xperia E connected to PC. Can you help me? I hope so and I hope you willl understand my noob english
Click to expand...
Click to collapse
Maybe your PC doesn't support MTP - does your phone charge when you use MTP?

NSDCars5 said:
Maybe your PC doesn't support MTP - does your phone charge when you use MTP?
Click to expand...
Click to collapse
Yes, it does...

Tallahassee[CZ] said:
Yes, it does...
Click to expand...
Click to collapse
Your Windows/Mac/Linux version is too old to support MTP - you need to use PTP to transfer data.

NSDCars5 said:
Your Windows/Mac/Linux version is too old to support MTP - you need to use PTP to transfer data.
Click to expand...
Click to collapse
I have Win 7...Now I tried it on another laptop with Windows 7 a it couldn't install drivers, when I had MTP, PTP and nothing of these two options...

Tallahassee[CZ] said:
I have Win 7...Now I tried it on another laptop with Windows 7 a it couldn't install drivers, when I had MTP, PTP and nothing of these two options...
Click to expand...
Click to collapse
Um... wait. Windows 7?! You should have MTP support... try to plug it, unplug it immediately, then plug it in again. At least in 8.1, this forces Windows to redetect drivers.

NSDCars5 said:
Um... wait. Windows 7?! You should have MTP support... try to plug it, unplug it immediately, then plug it in again. At least in 8.1, this forces Windows to redetect drivers.
Click to expand...
Click to collapse
Nothing..My phone says "USB debugging connected", "Connected as a media device", but on the laptop isn't anything. Phone is just charging.. (Maybe I should say this → My brother tried to connect with his Xperia L, but on laptop wasn't anything, too...)

Tallahassee[CZ] said:
Nothing..My phone says "USB debugging connected", "Connected as a media device", but on the laptop isn't anything. Phone is just charging.. (Maybe I should say this → My brother tried to connect with his Xperia L, but on laptop wasn't anything, too...)
Click to expand...
Click to collapse
No... it can't be that easy...
Turn off USB debugging. That'll fix it.

NSDCars5 said:
No... it can't be that easy...
Turn off USB debugging. That'll fix it.
Click to expand...
Click to collapse
Still nothing It was installing drivers, but it failed.. I'll try it on another pc at friday..

Tallahassee[CZ] said:
Still nothing It was installing drivers, but it failed.. I'll try it on another pc at friday..
Click to expand...
Click to collapse
Am facing the same problem. Using Remote Manager of ES FIle Explorer to transfer files

Weird Network and battery bug with Tamsui CM11 Nanhu
I have a Sony Xperia E Single Sim. I am using the latest build from this thread. .
Apart from known issues, I have a strange problem. After using my phone for few days, the network connectivity stops and battery stops charging.
This has happened twice in last 1 week. I had to flash the JB ROM ftf again using the flash tool and then push the kernel and the CM11 again to get everything working again.
I am using "batteryfix.img" kernel.

arunudayan said:
I have a Sony Xperia E Single Sim. I am using the latest build from this thread. .
Apart from known issues, I have a strange problem. After using my phone for few days, the network connectivity stops and battery stops charging.
This has happened twice in last 1 week. I had to flash the JB ROM ftf again using the flash tool and then push the kernel and the CM11 again to get everything working again.
I am using "batteryfix.img" kernel.
Click to expand...
Click to collapse
Don't use the battery fix kernel - it's old. Just flash the ROM and use the boot.img inside it as the kernel.

Thank you so much for quick reply,
I flashed the batteryfix kernel using flash tool and then flashed the cm11 rom zip. Does that mean batteryfix was overwritten? or should I extract the boot.img and flash using flash tool again?