Well my HTC Fuze works fine for about a year and half. However, idk how or why now my HTC Fuze power button on the top is not working. The only way to make it go to sleep mode if I let my phone turn of by itself in 1 min. Also, the only way to turn it on by slide the phone.
If anyone might know what cause the problem please help me.
Get xda shutdown or a similar app to turn the device off. There are a bunch of software options for putting the device to sleep, turning off the dispay, and shutting it down.
Same here but...
Same here but....
I have xda shutdown already, and when I Shutdown the phone it turn on again by itself.
I'm having the same exact problem! My Fuze has worked great for two years and all of a sudden a few days ago, the power button wont work. And my battery drains like crazy! It'll only last me 4 hours max... Any fixes on this? I've scoured the net and have seen that people have similar problems as this before; however, I haven't seen any fixes on it yet......
Possible solution power button problem Touch pro/Fuze?
I had the same problem on my Touch Pro, but now my power button seems to work again. I thought the problem might have to do something with my sim or my sd-card. The possibility of the sim as root of the problem was mentioned on this forum somewhere. The micro-sd card was just a guess. I had a lot of programs installed directly on the card, so when I did a hard-reset, these were still on there. If the problem would be on the micro-sd card, a hard reset would not help.
What I did was this. I removed the micro-sd card, the battery and the sim. I just pulled them out, since I wasn't able to turn the device off properly.
After that I only put back the battery and the device turned on automatically or I did it with the reset button on the bottom of my tp (I don't remember). Of course it showed the missing sim icon on top of the screen when turned on. The power button still didn't function at this moment.
I was a bit disappointed and inserted the sim, micro-sd card and battery again (I believe in this order). Lately, because of the power button problem, my tp turned on once the battery was inserted but this time it didn't. So I was pissed off that now my device wouldn't even turn on.
But to my surprise I could turn my tp on with te power button. Right now I can use the button just like before, it works fine!
Because I only tried this a few minutes ago I cannot tell you anything about the battery drain some of you and I experienced. And ofcourse I can't tell you if this is this is a permanent fix. I'm afraid to do a reset right now
I don't know why this worked for me and if it will work for you, but you can at least give it a shot right?
In short, what I did was this:
Pull out battery, sim and micro-sd card
Put back in the battery
Device will turn on automatically or turn on device with a reset (it will show the missing sim icon on top of screen)
Wait untill device is turned on properly
Pull out battery
Insert sim, micro-sd card and battery again
Turn on device with power button
If it won't work, maybe you can change the order of removing/inserting battery, sim and micro-sd card.
Good luck!
I was shocked to find a thread here of exactly the same issue I have, on the first page :O Few months back the power button stopped working altogether, so I resorted to using AEButton Plus to map double end call as the suspend power button, but now I have the issue of not being able to turn my phone off as whenever I do, the phone just turns itself back on again! At first I thought it was an issue with the internal mechanisms of the hardware button itself being jammed in place, but after reading this thread I'm starting to have doubts. I also experienced the battery drain problem with the phone rarely lasting 6 hours in standby, although a recent hard-reset and it shows that the battery drainage is around 170mAh with the screen on.
Been trying the above solution but to no avail ;( the phone keeps turning on by itself whenever I insert the battery, no matter the order.
All seems to you all have a HARDWARE problem.
Did you talking/using your PDA on rain/snow?
Maybe it make a some kind of short circuit?
Probobly the best way is carry your PDA to a service...
Yeah I've been pretty sure it's a hardware problem. I've hard-resetted and reflashed different ROMs and yet the problem persists. I don't remember getting the TP wet at all, but who knows. I don't know of any HTC service centers around here (Brisbane, Australia), so I've been looking for a way to fix this myself. No luck yet.
If you have skills to open Touch Pro you can probably do it at home.
Probably you must change flex:
http://cgi.ebay.com/Flex-Cable-Part...619562?pt=PDA_Accessories&hash=item3cb2d93eaa
This is not my item, I just simply shows how it looks this item.
I had the same problem.
My solution seems a bit unorthodox but it has always worked for me.
Slide your phone open, and flip it so it is facing screen down. You will see there is space between the power button and the phone. Put your mouth near that opening and breathe for 30 seconds to a minute. If the power button isn't working by the next day, repeat the process. The condensation from your breath does..well...something. And presto chango, it works again. The power button issue has happened about 3 times to me and doing this has always fixed it without fail.
Hoygans said:
My solution seems a bit unorthodox but it has always worked for me.
Slide your phone open, and flip it so it is facing screen down. You will see there is space between the power button and the phone. Put your mouth near that opening and breathe for 30 seconds to a minute. If the power button isn't working by the next day, repeat the process. The condensation from your breath does..well...something. And presto chango, it works again. The power button issue has happened about 3 times to me and doing this has always fixed it without fail.
Click to expand...
Click to collapse
In exhaust is moisture.
And then people say that the phone had no contact with the water... :/
Related
Greetings,
I just upgraded to the 2.02.00 ROM last night but still have the occassional lockups. I need to do a soft reboot to get the phone to respond. I believe when it locks up, the radio is still running since I see the blinking Green LED for the GSM. I have to switch off the POWER MANAGEMENT option of "Turn off in x min in not used" for battery power to be able to use the device for calls. The only level of battery saving I am stuck with now is the Backlight auto-off and the beam settings.
Is this something others are having as well or are any applications the culprit?
Thanks in advance for your assistance.
Regards
BHAMEED
------------------------------------------------------------------------
I-Mate JASJAR
--------------
Windiws Mobile 6 (CROSSBOW)Jwright
OS 5.2.318 (Build 15341.0.0.0) AKU 0.0
CE ROM Version : (2.02.00 WWE)
RADIO Version : 1.13.00
ExtROM Version : (2.03.05 WWE) UNLOCKED
Bootloader Version : ver 2.01
Try the power button
All buttons..including the power button...no response.
try holding down the power button
or setting the backlight to atleast one notch.
Urm... uh... ah.... eeee... aaaaaaaaaaaahhhhhhhhhh.
I can confirm this behavior on my MDA Pro (G3).
All ROM versions the same like Bhameed's on my MDA, ...except bootloader of course.
Anyone else noticed this on 2.02.00?
Hold on, can you guys be more specific with this? Are you absolutely sure it doesn't come back on when you PRESS AND HOLD the power button??? Really sorry if I sound like I'm being pedantic, but just from what you've written it sounds like you don't know how to turn on the phone???
hahahaHAHAHA!!! awesome reply spyder
ok, yeah i was thinking this is an issue of not being able to turn on your phone.
yeah what's going on that was different from before?
There have been only few moments where you think "Surely not"... I hate those moments, I'm just hoping this isn't one of them! If it is a genuine problem it's pretty serious and needs to be addressed, but if not.... well, I don't think I should say much more
Please please please say this is all a big joke. I'm tired, please excuse me.
I confirm this behaviour!
And more!
My Qtek freezes... freezes... and then PUFFF. Dead.
I wait some minutes (30 minutes) and I can turn it on again.
I'll send it to qtek.
Mine has a thing sometimes where there will be a pause between pressing the power button and it coming to life... sometimes if I get impatient and press the power button again it will turn it back off before it's come on.
I don't really get it though. Does it freeze while it's still on, or while it's turned off? If it freezes when on, there's plenty of info about how to prevent freezes (mostly 3rd party apps + reg tweaks).
If it really does freeze when off, then please let us know anything more on the issue that you can.
SpyderTracks said:
Mine has a thing sometimes where there will be a pause between pressing the power button and it coming to life... sometimes if I get impatient and press the power button again it will turn it back off before it's come on.
I don't really get it though. Does it freeze while it's still on, or while it's turned off? If it freezes when on, there's plenty of info about how to prevent freezes (mostly 3rd party apps + reg tweaks).
If it really does freeze when off, then please let us know anything more on the issue that you can.
Click to expand...
Click to collapse
Mine freezes everywhere. Bootscreen, Pin code menu (when u type your pin). It depends.
then pda doesn't turn on.
Many problems.
Just go to the assistance. :\
1.Sometimes it freezes while its on. For Instance I had program opened and then whenI tried pressing X to close nothing happened. I had to use the red hardware button to close. Wonder why.
2.I too agree while the phone boots and is searching for network, it takes very long, Meanwhile when the pin enter screen come up, unless the network is fully searched one cannot enter the sim pin code, it has few freezes. or at time the phone signal icon disappears on top bar and again you need to reset the phone.
aniel1 said:
1.Sometimes it freezes while its on. For Instance I had program opened and then whenI tried pressing X to close nothing happened. I had to use the red hardware button to close. Wonder why.
2.I too agree while the phone boots and is searching for network, it takes very long, Meanwhile when the pin enter screen come up, unless the network is fully searched one cannot enter the sim pin code, it has few freezes. or at time the phone signal icon disappears on top bar and again you need to reset the phone.
Click to expand...
Click to collapse
Again, I don't have this problem for some reason... I get very few freezes at all.
I think we're getting away from the original point of the post though... and normal freezing is well documented in most OS threads with means to prevent it.
Same here...Confirmed. Tried all button combinations to get the display back (short presses and long ones), but then end up having to do a soft-reboot to finally get the phone to work properly....
Bhameed said:
Same here...Confirmed. Tried all button combinations to get the display back (short presses and long ones), but then end up having to do a soft-reboot to finally get the phone to work properly....
Click to expand...
Click to collapse
And then you don't have other problems? Like freezes?
EDIT: I flash the original rom but the problem still here
I wonder if this could be a memory leak like someone suggested.... I'm sorry guys, I haven't experienced this problem, and I haven't seen any posts about it until this thread, is there any chance you guys with this issue can keep an eye over your memory status over say a couple of days to see if there's a leek and keep us posted? Once we find out what the problem is it should make a solution easier.
I experienced this problem as well using a cooked WM5 ROM on my HERM200 the only fix I found was migrating to another ROM. I'm currently using CUSTEL_Cing_v1.3, the battery life sucks but I love WM6, it is so much faster, I'm still tweaking and trying to resolve some other issues but other than that I am quite happy with it.
If you are experiencing the lockup I would suggest moving to another ROM as an option, that worked for me. Although a clean install usually fixes a lot of problems.
Hi guys, I find this quite annoying and wish there is a mod for this. I don't know about other HTC Touch Pro owners but i find my fone quite sensitive.........it's "EASILY" turned on by a single "SHORT" press of the power button.
I didn't even hold it for 1 second, if i suddenly press or tap on it really quick, for not even a second, it turns on.
In case ppl don't understand and tell me that maybe my fone was on in the first place but just have the backlight off, and with a single tap on the power button, the backlight goes back on again. I knew that already. But what the problem really is, is that it's totally off, and when i tap the power on button, it turns on, i.e it vibrates and shows the welcome screen and all that other startup animation.
Is there a way to increase the delay of the finger-press on the power button? Coz it's so annoying that it gets turned on when i don't want it to, especially since this fone's weakness is that it hogs battery even though i've already applied tons of tweaks etc to lower the performance and increase battery life......
Oh and i have another problem, i find the signal kinda weak, is there a program or tweak to increase the signal?? Coz on my old phone Sony Ericsson W950i, the signal is great and I never have bad signal problems with it. But using HTC Touch Pro, i have this problem. This only happens when i'm at Uni, but it's not like they have bad reception or signal blockers there like how schools or colleges have. Just that when i'm inside buildings and there're tons of other buildings around, i can't send the txt coz of bad signals and it's bloody annoying, but using my W950i works fine.....
also I noticed that when i type a txt message using the hardware keyboard, it seems to fail to send most of the time, but only when i'm in UNI. But if i switch to the software keyboard, the one that you use ur fingers or stylus, then when i send the message it often works compare to using hardware keyboard.......any ideas?
Problem No 1: Try Touch Lock Pro
Problem No 2: Try to burn the newest RadioROM.
thx but i'm not trying to lock my phone, so i don't think TouchLock Pro is what i need.......
My Raphael turns also on after pressing the power button for a little few moment. With touchlock Pro you can prevent that you mistake your Raphael. I hope you can understand what I write in my "own" english
Ok so i've got it installed now and went through all the settings but couldn't find anything that can delay the power-on button press, I still have this problem. The app is a screen-lock app, there aren't any options regarding to power-on delays.......
plz tell me what settings etc to use.
I've never said that you can fix your problem with TouchLock Pro. With this you prevent to use your Raphael when you press your power button accidentally.
ya but that's only useful when my fone is on and it locks the phone but i'm trying to prevent my fone from turning on in the first place if i accidentally press the power on button for not even 1 second, because then it will turn on and i don't want that.
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
wow yay finally someone else other than me also report having the same problem, boy am i glad to know that i'm not the only one having this problem, i thought it was just something wrong with my fone and not all HTC Touch Pros....
i can't believe there aren't any results on Google, no forum discussions or solutions to this whatsoever. Also, nobody seemed to report this problem or come up with a solution on XDA as well as other forums i use like PPCgeekz or WMusers etc.........which is odd considering how this problem is quite annoying, that if u suddenly power on the fone by accident, it can drain battery life and god knows HTC Touch Pro has a crap battery life.............
I think that htc has done a bad job testing the powerbutton on the tp2.
There are some other things like weith, thikness and batterylife that could be improved but the powerbutton issue is realy a BIG bug.
Why they didn't make a slidebutton or a timeout between push and activation?
A dobble tap on the powerbutton could also be a solution.
The next rom shoold have a improvement about this button.
People, please react on the powerbutten problem so someone can fix this.
Thanx
jewelkobayashi said:
same problem here...the phone I thought I had turned off was back on, because accidently it got touched by something else in my luggage.
The only solution which to me is unsatisfactory, is to take out the battery so that it cannot power up.
C'mon...there has to be a better solution than this, no???
Click to expand...
Click to collapse
Leaving the Touch Pro (Raphael) for some minutes without battery will stop the clock. So, when you put back on the battery and power up the device, the clock will display the wrong time. The time when you remove the battery.
This is hardware related.
Can produced different symptoms though.
Facts Behind the Power Button
If take a look at the inside of the powerbutton, there are 2 points making contact when you press the button. If you press it, the software will recognize this and the screen will turn off.
If you press it long enough you'll get the "QuickShutdown" message.
But, if water/alchohol/liquid gets underneath the button, the 2 points may be making contact, because water/alcohol conducts.
The button is very weak. Due to this, it may not properly work if you have used it for a long time.
As a result, despite the fact that you hit hibernate/sleep/suspend on the hardware power button = yes, the screen fades to black. But IT IS STILL ON. That explains the battery being drained.
Solution:
Open the phone hardware. Clean the power button connector manually.
Disassembling Instructions:http://www.pdacenter.ru/razborka/htc-touch-pro/
Power Button Connector: http://kudryashovda.ru/content/ne-rabotaet-knopka-vklyucheniya-na-htc-diamond
off / on / off on
i heart everyone talking about the sleep of death and to be honest, i havent really experienced this, but i definatley do have an intermitent power on and off button problem on my touch pro 2.
i read on some other forum that it could possibly be the slider that is casuing the problem. but to be honest, the button its self feels fine and looks fineand when i does work it works a treat. i havent had any water damage done to it what so ever. so im not sure , i am new too all this self help mobile stuff. so please excuse my ignorance. Ive doen the usual hard reset, button works for a few hours then calls it a day. soft rest, was working up until this week. i cant get ot to boot up again, while fiddling with the batter and a power lead. but the power button is so intermitent its driving me nuts. id be so grateful if anyone could shine any form of light on this. thanks in advance
Hi there,
I'm having an issue with the my XT720 and hopefully someone can help, or has at least seen something similar. When the phone goes unused for a minute and the screen times out, I can not get it to come back on as expected. If I press the power button, the lights under the four buttons power on, but the screen stays off, and both the screen and buttons don't respond to being touched (ie no noise, no feedback, nothing). If I hold the power button down, it will not stop or start, and I have to do a battery pull (the phone has not been rooted). If I press the power button to lock the phone manually, it can come back to life, but not after a timeout.
This started happening when I replaced the sd card that was included with a new one. I've had occasional issues where it will decide that I don't have an sd card inserted (also fixed by a few battery pulls), so I figured time to get a new / faster sd card. The new one has worked fine in my PC to store data, but once I put it in the phone, this happens.
If I switch back to the old sd card, the screen problem goes away. I've tried formatting the sd card from the phone (as well as from my pc), and it doesn't help.
Any ideas or input is appreciated.
Thanks,
Brandon
I had a similar unpredictable problem. I'm not sure what the core of the problem is but sometimes I suspected the SD-card as you did.
Sometimes the phone didn't show up the display even after a battery pull out. The thing that always helped in MY case was to pull out the battery for 1 hour and the problem disappeared for 1-2 months...
Hope this will help.
did you in anyway modify your phone? that includes rooting etc
i had this problem before but it stopped after i cleared my davik cache and it re populated the directory after i rebooted it. worse case scenario, you might want to try reflashing it.
I've not modified it at all. No rooting, no flashing, nothing. And I'm not keen to reflash it as it's from Wind in Canada, and there is no Wind rom posted. I know others are compatible, but I suspect it would make it harder to get warranty service if it has a BrightPoint rom on it (though I guess I should check the build number and see if it's the same).
I (occasionally) have the same problem. I, on the other hand, have had this issue since I bought the phone back in August of 2010. My phone is rooted, sometimes overclocked, and running standard android 2.1update1. What happens to my phone is that it is in lock mode and I press the lock button and all that happens is the 4 buttons below the screen illuminate but the screen itself does not. To solve it, I do a battery pull and it is back to normal. I don't know specifically what causes it because apparently this problem is also happening in unrooted XT720's. BTW I have never changed my SD card from the 8GB one that came with the phone.
I hate to hear about this issue but I'm glad I'm not the only one having it. I just got my XT711 a few days ago and the screen has done the same thing a few times to me also. I know 1-2 times I just picked up my phone and it did it, another time was when my camera froze, and once even when I paused Angry Birds game until the screen shut off, that time when I pushed the lock/ power button the 4 bottom lights came on and I could here the sounds from my game but my screen was blank. Hasn't done it in a couple of days, so hopefully it just had the flu! If anyone finds out what it is, let me know also because I've seen people with all models of XT phones having it.
Try another SD Card
Thank you, yes I have a new class 10 sd card ordered, so hopefully that cures the problem
Hey everyone who reads this.
I'd like to start my topic with apologising if I post this in the wrong section.
So, I have a LG Spirit H440N LTE for about 3 years now, maybe a little less. I've always taken good care of it, both physically and in updates / security wise aswell.
My phone has been working flawlessly until the last 2 days. 2 days ago i was charging my phone, and when it vibrated (meaning its 100%) I pulled the cable off, and pressed the power button (power button locks - unlocks the screen) the screen didn't turn on. I was like "wow that's strange" but didn't care much, i just kept pressing the button every 5-6 seconds, nothing.
At that point I pulled the battery out, let it sit for a short time and then put it back, start the phone, I felt the vibration (meaning it's starting up) but no screen, so my first idea was that I need to get a new firmware and completely reinstall my phone, as it seems like it got bricked.. for no reason, by itself ? Strange thing but I accepted it and literally been googling for 9 hours now and I find more and more issues.
After I got LG FlashTool, drivers, and even 3 different firmwares, I wanted to start the phone in download mode to start upgrading, but even though I held down "volume up for 5 seconds and then put the usb cable in" nothing happened, no screen, my PC didn't recognise the phone either.
So I got a little bit mad and pulled the cable out from the phone, I wanted to remove the battery, but out of nowhere the phone suddenly started loading in, screen working completely fine, i could do whatever i want, so my first thing was to do a hard reset. After the hard reset I set up my usual stuff (important apps etc) and I locked the screen so my battery won't go down. Little did I know, I ****ed up again, because ever since that happened, I can't get my screen to work again. I tried everything I could but my PC still doesn't recognise the phone (even after a LOT of drivers being installed), charging the phone doesn't do anything. Regardless if I remove - put back the battery no screen, no screen in download - hard reset mode either, it's just completely black.
I'd like to have some sort of help, because I am just completely out of ideas, I really feel like a firmware change could fix the phone, but if the computer doesn't recognise it, I have no idea what to do.
rawon3 said:
Hey everyone who reads this.
I'd like to start my topic with apologising if I post this in the wrong section.
So, I have a LG Spirit H440N LTE for about 3 years now, maybe a little less. I've always taken good care of it, both physically and in updates / security wise aswell.
My phone has been working flawlessly until the last 2 days. 2 days ago i was charging my phone, and when it vibrated (meaning its 100%) I pulled the cable off, and pressed the power button (power button locks - unlocks the screen) the screen didn't turn on. I was like "wow that's strange" but didn't care much, i just kept pressing the button every 5-6 seconds, nothing.
At that point I pulled the battery out, let it sit for a short time and then put it back, start the phone, I felt the vibration (meaning it's starting up) but no screen, so my first idea was that I need to get a new firmware and completely reinstall my phone, as it seems like it got bricked.. for no reason, by itself ? Strange thing but I accepted it and literally been googling for 9 hours now and I find more and more issues.
After I got LG FlashTool, drivers, and even 3 different firmwares, I wanted to start the phone in download mode to start upgrading, but even though I held down "volume up for 5 seconds and then put the usb cable in" nothing happened, no screen, my PC didn't recognise the phone either.
So I got a little bit mad and pulled the cable out from the phone, I wanted to remove the battery, but out of nowhere the phone suddenly started loading in, screen working completely fine, i could do whatever i want, so my first thing was to do a hard reset. After the hard reset I set up my usual stuff (important apps etc) and I locked the screen so my battery won't go down. Little did I know, I ****ed up again, because ever since that happened, I can't get my screen to work again. I tried everything I could but my PC still doesn't recognise the phone (even after a LOT of drivers being installed), charging the phone doesn't do anything. Regardless if I remove - put back the battery no screen, no screen in download - hard reset mode either, it's just completely black.
I'd like to have some sort of help, because I am just completely out of ideas, I really feel like a firmware change could fix the phone, but if the computer doesn't recognise it, I have no idea what to do.
Click to expand...
Click to collapse
You might be having hardware issues, such as a faulty power button. If you are the type of user that frequently presses the power button to lock/unlock the screen, this leads to excessive wear on the button components, this is why some users prefer to use the "tap to sleep" and "tap to wake" feature, to avoid wearing the power button out. On my LG, this feature is called "KnockOn", it's located in Accessibility settings.
Sent from my LGL84VL using Tapatalk
Hi everyone, I'm throwing this out there because I've run out of ideas about what has just happened to my U12+ (64gb) today.
I woke up and used my phone as normal, caught up on Twitter and the news, the usual apps etc. nothing untoward. The same routine I've had with my phone for the past 18 months of owning it with zero issues. My handset is stock OS (Android 9) and so not rooted or anything like that. Virtually all the apps I use are standard issue from the Play Store, nothing really "out there" and I have BitDefender installed to look after security. Same setup I've had for over a year. The battery was around 35% so I plugged it into my wall charger while I went off to grab some breakfast. When I returned a couple of hours later the light on the handset was green, I unplugged the charger and attempted to unlock it with my fingerprint.
The phone asked for my PIN, no big deal so I entered it. Black screen. Tapped the power button again, it requested my PIN again, I entered and... black screen. Okay, I was a little bit concerned now. I held down the power button so the haptic buzz occurred, held for 10/20/30 seconds, a minute... nothing, no restart. Tap the power button and it asks me for my PIN again and shows yet another black screen. I held down Power + Volume Down but again, nothing and no restart.
I asked someone to call me, the screen came to life and I could take the call but each time I tried to pull down the system tray in order to try and reach Settings to restart it asked me for my PIN, I entered it = black screen. The call was unaffected.
I removed my SIM + microSD card tray = same deal as above.
The phone is clearly responsive in some way and the screen does display to ask for my PIN but I can't get into it in order to reboot it. Extremely worrying.
Does anyone have any advice? At the moment I am faced with the prospect of simply allowing the battery to run out so the phone shuts down naturally but that is going to take the best part of 2 days.
I'm really disappointed because I was planning another 1-2 years use for this handset as I just bought a 1TB microSD card which has been fine in the phone for weeks so I don't think that's the cause. It is also genuine SanDisk.
Any suggestions or advice? Thanks in advance.
Hello, I hope you have made a backup with google backup recently... This does not happen often on android, but sometimes the system could have a problem. You can try this go the bootloader with the power and volume buttons , after recovery.. after apply a wipe data/ factory reset.. is will make a factory reset of your phone except the sd card. You should by fine after that and profit again.
Thanks, I appreciate your reply.
At the moment I am running the battery down until the handset switches off naturally. When it comes back on I will try to launch the phone normally, if that doesn't work I'll run the battery down again and attempt to reach the bootloader.
My photos are backed up to the cloud, I may lose some text messages but I managed to transfer the majority of my 2FA over to another Android device bar one.
At the end of the day if it's a choice between wiping it or a bricked/unusable handset then I don't really have one. What a pain.
Magimix^ said:
Thanks, I appreciate your reply.
At the moment I am running the battery down until the handset switches off naturally. When it comes back on I will try to launch the phone normally, if that doesn't work I'll run the battery down again and attempt to reach the bootloader.
My photos are backed up to the cloud, I may lose some text messages but I managed to transfer the majority of my 2FA over to another Android device bar one.
At the end of the day if it's a choice between wiping it or a bricked/unusable handset then I don't really have one. What a pain.
Click to expand...
Click to collapse
At the moment I am running the battery down until the handset switches off naturally <----- why that??? Even on a bootloop or a black screen you can reset it hold the buttons power and the volume, you can go on the bootloader.
Max128 said:
At the moment I am running the battery down until the handset switches off naturally <----- why that??? Even on a bootloop or a black screen you can reset it hold the buttons power and the volume, you can go on the bootloader.
Click to expand...
Click to collapse
The first thing I tried to do was hold down the power button or the power button in tandem with the volume buttons but the handset won't restart. I tried loads of times holding it for different amounts of time and... nothing.
Trust me, I tried.
The only way I can get the device to switch off is by draining the battery. I'm almost at 20% so it shouldn't be too much longer.
Well I already got a black screen after flashing a module magisk.. I have holding the power button and the phone have restart no problem, same thing on bootloop. You need to be sure to hold the button correctly.
Max128 said:
You need to be sure to hold the button correctly.
Click to expand...
Click to collapse
Yeah, I'm certain I was holding the buttons correctly. I tried about 20 times using different combinations just to be sure but the device would not restart. The haptic shock buttons are one of my least favourite features of the u12+, it's got to be said.
Anyway, the phone ran out of battery about 15 minutes ago. I left it alone for few minutes and switched it back on. It allowed me back in and the device appears to be fully functional again. I can unlock by thumb print, face or PIN without issue.
Basically, it's fixed. My only concern is I have no idea what caused it or if it will happen again.
Thanks for offering help though, I appreciate it. I'm not sure if this thread can be closed/locked now? I'll look into that.
Cheers.
Yes.. i love the buttons too i never got a problem with this. Great if is fixed! Maybe make a factory reset the next time.
I am wondering if the new flagship have haptic buttons too.. htc will announce it Tuesday.