Related
Is any one else having an issue of the GPS taking an extremely long time to get a lock?
Sent from my SAMSUNG-SGH-I897 using XDA App
Out of the box it worked flawlessly. I messed with a location setting and then gas took around thirty seconds to lock. I turned that setting back on and gas flew again. On average, my gps has a lock by the time the map loads
systoxity said:
Out of the box it worked flawlessly. I messed with a location setting and then gas took around thirty seconds to lock. I turned that setting back on and gas flew again. On average, my gps has a lock by the time the map loads
Click to expand...
Click to collapse
Could you tell me what your gps settings are then? Also could you dial *#*#1472365#*#* and go to application settings and spul or something like that and list what you have there?
I'd say that driving home the gps got a lock relatively quickly but it was only a lock accurate to within 50 meters. I guess this is good enough for driving but it wouldnt be good enough for biking or jogging.
Mine takes a full minute to lock. I think the issue, at least with mine, is that no matter what I do to the settings, their not saved. So if I go to settings and change location settings, or use *#*#1472365#*#* the settings never seem to save. Not sure if I'm doing something wrong or this is a bug, sure seems like a bug though.
I noticed the first time i tried to get a GPS lock it took forever. But every time since then it has been getting progressively faster. Now it locks and pulls up traffic info within seconds...
I am having a difficult time with the gps locking and it is very inaccurate. I went into the settings and change d the startup to cold
Sent from my SAMSUNG-SGH-I897 using XDA App
whoa, you get traffic info? is that with google maps?
I have been having the same problems. I tried messing with the GPS settings and it seems to have made things somewhat better, though I can't confirm it. Here's what I did, if you are interested.
Dial *#*#1472365#*#*
Go to SUPL/CP Settings
Set server to supl.google.com
Set server port to 7276
Set SUPL Secure Socket to OFF
Go back then go to Application Settings
Set Operation Mode to MS Based
Set Accuracy to 80
Set Use SkyHook to ON
I'm not sure if any of these things made a real difference at all, but I do know that right now my GPS is reporting an accuracy of within 10 meters in a location where I couldn't get a lock before. I'd love to hear if this helps or hurts anyone else's GPS performance.
Thanks this actually fixed my issue of not being able to ft a lock at all. Accuracy is pretty high at 30m but it was spot on in Maps.
Sent from my SAMSUNG-SGH-I897 using XDA App
Thanks for the tip.
the gps is still not working inside my house, but outside it locks faster outside.
Thanks
Shadow77895 said:
I have been having the same problems. I tried messing with the GPS settings and it seems to have made things somewhat better, though I can't confirm it. Here's what I did, if you are interested.
Dial *#*#1472365#*#*
Go to SUPL/CP Settings
Set server to supl.google.com
Set server port to 7276
Set SUPL Secure Socket to OFF
Go back then go to Application Settings
Set Operation Mode to MS Based
Set Accuracy to 80
Set Use SkyHook to ON
I'm not sure if any of these things made a real difference at all, but I do know that right now my GPS is reporting an accuracy of within 10 meters in a location where I couldn't get a lock before. I'd love to hear if this helps or hurts anyone else's GPS performance.
Click to expand...
Click to collapse
I change my settings without notating what the original settings were. Does anyone have that information?
rkorzuch said:
I change my settings without notating what the original settings were. Does anyone have that information?
Click to expand...
Click to collapse
SUPL/CP Settings
Server www.spirent-lcs.com
Port 7275
SUPL Secure On
Application Settings
Operation Mode Standalone
Accuracy 50
Use SkyHook Off
No Real Change...
I've tried following the directions in the GPS Fix 101 thread under the Vibrant section: no luck... I tried what was suggested abouve: no luck...
Can someone tell em what I'm doing wrong? I know that usually the issue is w/ the operator, not the device and I'm new to Android. I like the phone, but GPS is a BIG reason I bought an Android phone. I need something that is REALLY accurate as we have smaller blocks in some of the towns I go to. Seriously, where my parents live there are A, B, etc. streets and some city blocks are so small there is an "L 1/2 St" ( You can laugh about everything being bigger in TX...)
I do a ton of traveling so this feature is VERY important to me. I just got back from one cross country trip tonight and seldom did I get a good GPS lock and that was on major Hwy's. How does this compare to the ARIA? My sister just got one of those, but hasn't messed around w/ it as it is her first Android phone.
I'd appreciate any help or advice anyone can give. Thanks in advance!!!
If it helps; I was just outside my father-in-laws house and it initially had me about 2-3 blks away in the middle of a golf fairway. It is a clear night, no clouds or heavy trees. I can only detect 1-2 sat.'s when I do a test, and I have a Bodyglove silicon/rubber case/skin.
Ok, I tried it again... In the house I'm about 500 ft off from where I really am and placed in a golf fairway. Outside I am FURTHER off: I'd estimate at least 5 blocks and placed in the middle of a different golf fairway. For comparision sake, my wife's iPhone 3Gs has her within 10-20' while inside the house. I can detect 3-4 sat's. which is the most ever, but it does not use any of them... To me, this is unacceptable and a great cause for concern. What can I do???
Dial *#*#1472365#*#*
Go to SUPL/CP Settings
Set server to supl.google.com
Set server port to 7276
Set SUPL Secure Socket to OFF
Go back then go to Application Settings
Set Operation Mode to MS Based
Set Accuracy to 80
Set Use SkyHook to ON[/QUOTE said:
I changed my settings to the above, and I've gotten much better results with my GPS. It finds my location a lot quicker, and more accurate. Try these settings if you haven't already. If you have, I guess I would just take it back to AT&T. Having a lagging and inaccurate GPS on a smartphone can be annoying.
Click to expand...
Click to collapse
operation mode??
Shadow77895 said:
I have been having the same problems. I tried messing with the GPS settings and it seems to have made things somewhat better, though I can't confirm it. Here's what I did, if you are interested.
Dial *#*#1472365#*#*
Go to SUPL/CP Settings
Set server to supl.google.com
Set server port to 7276
Set SUPL Secure Socket to OFF
Go back then go to Application Settings
Set Operation Mode to MS Based
Set Accuracy to 80
Set Use SkyHook to ON
I'm not sure if any of these things made a real difference at all, but I do know that right now my GPS is reporting an accuracy of within 10 meters in a location where I couldn't get a lock before. I'd love to hear if this helps or hurts anyone else's GPS performance.
Click to expand...
Click to collapse
For the android newbie... can you give a little more detail on how to get here and Skyhook?
TIA
Never mind I found it.
Will/Can this be fixed.
I am very disappointed with my GPS performance in an otherwise very enjoyable phone.
GPS is important to me and I am seriously considering returning the phone. There are a couple of other issues, but I'm working through them.
Do you think the issue will be repaired? Guess at how long until fixed? I know it's all just a guess.
Shadow77895 said:
I have been having the same problems. I tried messing with the GPS settings and it seems to have made things somewhat better, though I can't confirm it. Here's what I did, if you are interested.
Dial *#*#1472365#*#*
Go to SUPL/CP Settings
Set server to supl.google.com
Set server port to 7276
Set SUPL Secure Socket to OFF
Go back then go to Application Settings
Set Operation Mode to MS Based
Set Accuracy to 80
Set Use SkyHook to ON
I'm not sure if any of these things made a real difference at all, but I do know that right now my GPS is reporting an accuracy of within 10 meters in a location where I couldn't get a lock before. I'd love to hear if this helps or hurts anyone else's GPS performance.
Click to expand...
Click to collapse
They above settings improved my GPS signal acquisition, however, accuracy was still very poor. This was extremely evident when navigating around town. I'm currently testing the following settings and so far things seem to be working well:
Go to SUPL/CP Settings
Set to AUTO config
Set SUPL Secure Socket OFF
Go back then go to Application Settings
Set Operation Mode to MS Assisted
Set Accuracy to 100
Set Use SkyHook to ON
Using these settings I can reliably track 8-9 satellites and lock 4-5. Accuracy tends toward 5-10 meters and signal acquisition is usually within seconds.
I've noticed that after changing settings it can take the GPS a while to acquire a lock. Subsequent uses improve in speed.
I'm by no means an expert on these settings so if anybody sees a problem with them please let me know.
Just got my Samsung Captivate about a month and I got my wifi connected to the school network, but when i open the broswer or any apps need internet i didnt get any connections? at the first week it works.. and when connecting to the school wifi it should be come out with the school login page,, then the internet will work.. however the wifi is connected doesnt matter how strong the wifi singal is.. it just cant load and cant bring me to the login page..
I really need help..
and the wifi works everywhere.. except my school...
btw my friends iphone 3gs works..
I am also at college and have had the same problem. the best reason I have found is the phone itself. half of our wifi is an older standard that does not work on the phone. it shows up as wep and i can not get it to recognize it as 802.1x . in my tinkering I have also messed up the wifi that was working.
long story short it probably won't work. I have spent a long time trying to get it to work with no luck
Sent from my SAMSUNG-SGH-I897 using XDA App
Hello to both of you,
I also attend a college with an 802.1x connection and the captivate supports most of these networks; however you will probably need to configure the network settings manually (usually retrievable on your schools IT site). If you dont mind digging up your settings I would love to check to see if I can configure your phone.
FYI, you might be having a problem similar to what's seen in this post.
http://androidforums.com/captivate-support-troubleshooting/142397-odd-netmask-issues-wifi.html
I definitely had this problem today. It appeared connected but no web pages would load. Going to have to investigate further. Why can't things just work
I know my school recently implemented some new security certificates that you must agree to before logging in, has anything like that changed for you? My wife's Aria is running 2.2 and can log into the school network, but my captivate cannot. It is frustrating I know.
Seems some colleges and universities are noticing issues with android devices letting the DHCP leases to expire but keeps using the IP address assigned instead of requesting a new one.
See the following links.
h t t p ://www . natecarlson . com/2010/08/27/android-att-captivates-wifi-networking-is-broken/
h t t p ://www . net . princeton . edu/android/android-stops-renewing-lease-keeps-using-IP-address-11236.html
I actually have similar issues with my Belkin wireless router at home. My laptops and other wireless devices have no problems connecting or re-connecting but the Captivate just refuses to re-connect after the connection was terminated. Even after resetting the router, the phone just keeps trying to use the same IP address for some reason.
The only way I could get it to reconnect is to either reboot the phone or to remove the AP entry which is a pain especially if you have wireless passwords.
Hopefully someone with better insight into how Eclair and Froyo handles WiFi can come up with some fix.
more solutions?
I believe the new 2.2 firmware solves this issue. I too am at College and my captivate FAILS to actually access the internet through wifi unless I statically assigned the IP.
I just updated to Froyo and it connected instantly. I'll have to do more testing to make sure, but I think Samsung finally fixed it.
captivate wifi issue at school
i just got Galaxy S (Captivate) and wi-fi is giving trouble.
when i tried at a university campus, it gives error and says can't open and try again later. it is like, i get connected to the network, IP and DNS and everything is generated. But when i open browser to open a website, instead of taking me to login page it gives the above error.
here is what i get when i try to open a website.
'web page not available'. the page might be temporarily down or it may have been moved permanently to new address.
here are some suggestions:
- check to make sure device has signal and data connection. (I made sure it is connected to wifi)
- reload page later. (i tried after 5 mins, same result)
- view cached copy from google. (doesn't work either)
i am not able to understand why is this happening. i tried restarting the phone after connecting to wifi but no luck. any pointers?
Sounds like they use a portal system which requires logon and doesn't play nice with the Captivate's browser. Unfortunately many such portal systems are written poorly and I've even seen some that only work with Internet Explorer.
You could try a different browser on the Captivate. Dolphin allows spoofing assorted User Agents, which might help.
Hey guys, I have the same problem connecting to m school's network login page. It would say connected but the website always says cant be found. But the good news is that I found a way to connect to it manually! What you need is your captivate and friends iphone 4 or 3gs. First have use your friends iphone to connect to the wifi and then go into wifi settings. You should see 2 DNS address, Ip address, netmask (subnet mask) and router address. Now jot those addresses down except the ip address. Go to settings->wireless and network->Wi-Fi settings->now tap the bottom left button under the samsung logo and click advanced. Now check use static ip. Do not enter anything for your ip address just yet (we will do this last). Now enter router address into gateway, subnet mask into netmask, DNS1 to DNS1 and DNS2 to DNS2. ok when you are done click back and tap the network you want to connect to. Once you are connected jot down your ip address by taping the network once more. now go back to where the static ip was and input the ip address you just jot down into the ip address underneath use static ip. Disconnect and reconnect to the desired network. You may have to do this a few times or reboot your phone. This has been working for me so far around different buildings but with the same school network connection. I hope this helps cheers!
sremick said:
Sounds like they use a portal system which requires logon and doesn't play nice with the Captivate's browser. Unfortunately many such portal systems are written poorly and I've even seen some that only work with Internet Explorer.
You could try a different browser on the Captivate. Dolphin allows spoofing assorted User Agents, which might help.
Click to expand...
Click to collapse
Yeah, my school uses the Bradford dissovable agent. Funny thing is, some connections work perfectly, others not at all. Technically none should work, and sometimes I feel that maybe I should tell them that sometimes somehow it is possible to bypass the whole agent thing- but why rock the boat just yet
Does it need a proxy to work? If so, this app is amazing.
http://forum.xda-developers.com/showthread.php?t=766569
I figured it out a month ago, and it is actually petty easy. But you really have to change ip address manually, usually just the last number.
Sent from my SAMSUNG-SGH-I897 using XDA App
For anyone interested in playing with it, I have built the ppp_mppe.ko module that is missing to make the PPTP with encryption work. My initial testing shows that it connects and passes traffic. Unfortunately, after a few minutes it stops passing traffic but remains connected. I need to investigate the logs...
To try it, open a terminal, cd to the folder where you stored it, su (YOU NEED ROOT), "insmod ppp_mppe.ko", and then go try an encrypted VPN PPTP connection. Mine failed the first time, and then worked on subsequent connections.
e081820061574b1ab1188294e62e1cff ppp_mppe.ko
I'm curious to see if anyone here cares about this and how it works for you.
Shayne
I'm really interested in make my VPN work. I'm using CM7 on Galaxy Tab. I don't think your module was made for my kernel.
Is this ever going to be fixed? I'm able to connect to my PPTP VPN provider, and it requires encryption. I can ping out for a while... but as soon as I open the browser or other app the actually uses the net the pings stop and connection stops transmitting, although still connected. So frustrating...
Yeah, the module isn't going to work on other devices.
I get the same result as you when I do a PPTP connection. Actually when I posted this I hadn't dug deep enough to find that this was a long standing problem, and I just figured that getting the module loaded in would fix it.
Seems like this module should be where the bug is, but I haven't had time to look at it more closely. Apparently there aren't enough people that care about this feature.
Looks like this problem is related to the MTU. I can send/rcv 1380 byte pings, but anything bigger causes the connection to quit working. I'm thinking that rebuilding pppd with a lower MTU might be interesting, but I need to get set up to do that. pppd does not pay attention to config files, and mtpd, akaik, doesn't pass an mtu/mru arg to it.
velocityfactor said:
Looks like this problem is related to the MTU. I can send/rcv 1380 byte pings, but anything bigger causes the connection to quit working. I'm thinking that rebuilding pppd with a lower MTU might be interesting, but I need to get set up to do that. pppd does not pay attention to config files, and mtpd, akaik, doesn't pass an mtu/mru arg to it.
Click to expand...
Click to collapse
I have come across this blog with some mtpd command line examples, see if it helps on manually connecting with custom MTUs.
I also tried a couple suggestions of changing MTU on the eth0 to 1480 and 1380 before and after connecting to the VPN, without any success. Also tried different MTUs on ppp0 after connection also with no success.
I just wanted to say that even though this stuff is far too above my head for me to contribute, thanks for working on this!
Now I can keep daydreaming about turning my phone into a PPTP server...
I understand that this thread hasn't been active for a while, however, I do want to say thanks for this! With the provided module, I was finally able to connect to our VPN server using PPTP with encryption. In fact, I was able to do so as well over 4G. I read through several threads on various sites regarding the commonality of this issue and possible firewall NAT restrictions on Verizon's behalf. It seems it was just a module needed that fixed all this.
On a side note, I haven't had the connection dropped so far. I'm about 1000 ping sequence in and connectivity is still up and running. Not sure if this is an effective means of validation it.
If it helps others looking into this issue as well, note, that I've tried virtually all available kernels as of date to this posting. Nothing worked. This module was the only thing that granted access to our VPN server.
Update: Spoke to soon. After attempting to log into a server, data was no longer able to pass through.
I'm glad to hear it has helped you. It didn't turn out to help me.
To test it further, I suggest you pass some real traffic over it. Regular ping traffic doesn't cause the loss of connection that I'm familiar with. If it continues to work, count yourself lucky, and you might want to convince your favorite kernel builder (imnuts, maybe) to include that module.
I spent some time looking into the dropped connection issue and was not successful at finding a solution. What I think I learned is that when the pptp server handles a packet larger than the mru and fragments the packet, the first fragment decrypts ok, but the second fragment decrypts to junk. It's supposed to be stateless encryption, but all subsequent packets silently fail to decrypt. Thus, all traffic stops moving and the link eventually times out.
This problem only seems to affect the reception of packets. The outgoing traffic seems to be unaffected.
The PPP and MPPE code in the froyo kernel is unchanged from that in the mainstream Linux kernel. My Ubuntu desktop can do PPTP with MPPE no problem. So why can't froyo?
This was absorbing too much of my time, so I finally gave in and set up L2TP.
velocityfactor said:
The PPP and MPPE code in the froyo kernel is unchanged from that in the mainstream Linux kernel. My Ubuntu desktop can do PPTP with MPPE no problem. So why can't froyo?
Click to expand...
Click to collapse
I'm not entirely sure if froyo's at fault as I was able to confirm with a few of my colleagues that they were able to VPN with PPTP just fine on their non-charge device that's on froyo. Additionally, I even tried the GB leak but ended up with the same results.
velocityfactor said:
This was absorbing too much of my time, so I finally gave in and set up L2TP.
Click to expand...
Click to collapse
Thanks for taking a stab at this though. It does seem that there isn't a big call for this feature within the community; a huge bummer for those that does need it.
Problem details
I have this problem with my HTC Inspire 4G and I've been researching it a lot.
The error reported on PPTP server side suggests that Android PPTP client tries to negotiate unsupported protocol:
pppd: Protocol-Reject for unsupported protocol 0xxx
but it is a misleading message since initially the protocol is negotiated correctly and the connection is established. Only after several dozens of frames are transmitted the error appears and it repeats with different value of unsupported protocol in the message.
Since then the PPTP tunnel is out of sync and Android client sends effectively random octets from the MPPE encryption module.
I will include links here to Web pages with details FYI if you are interested in more details about it.
http://www.securitykiss.com/resources/articles/android_vpn_bug/index.php
http://code.google.com/p/android/issues/detail?id=10901
http://code.google.com/p/android/issues/detail?id=4706
velocityfactor said:
This was absorbing too much of my time, so I finally gave in and set up L2TP.
Click to expand...
Click to collapse
Interesting that PPTP failed you, but L2TP worked. I had the opposite experience. A stock unrooted Android 2.2.2 connected to a debian pptpd just fine, mostly with default settings. (although I didn't go as far as to route traffic, just confirmed that there's an encrypted connection)
But it's ipsec that doesn't work for me. Would you please post the L2TP server configuration that works for you?
I'll post the PPTP server settings if anyone is interested.
The PPTP doesn't fail until you send traffic. Specifically, it works ok until you send a large packet that get fragmented. Then it seems the encryption becomes out of sync and things go downhill from there.
My L2TP is running on Windows Server just using default settings, so nothing to post really.
This thread should probably be closed since it doesn't really relate to the Charge specifically and the fix isn't "getting close" afaik.
Shayne
At this point, I essentially gave up on PPTP on the Charge (more specifically, Froyo and Gingerbread), but I did some testing on ICS the Galaxy Nexus. The Galaxy Nexus works fine with my DD-WRT PPTP server. I didn't notice any issues with it.
But yeah, on both Froyo and Gingerbread I could get a PPTP connection to link up, but no traffic would pass.
Thankfully it seems that Google got it right with ICS, now I just have to spend more money on an ICS phone to get the features they advertise
Perhaps ICS will roll out to the Charge, but I'm not going to bet the farm on it. It would be interesting to try PPTP connectivity on JT's ICS build, but I do need the cellular radios to work so I haven't gotten around to trying it yet.
xdadevnube said:
At this point, I essentially gave up on PPTP on the Charge (more specifically, Froyo and Gingerbread), but I did some testing on ICS the Galaxy Nexus. The Galaxy Nexus works fine with my DD-WRT PPTP server. I didn't notice any issues with it.
But yeah, on both Froyo and Gingerbread I could get a PPTP connection to link up, but no traffic would pass.
Thankfully it seems that Google got it right with ICS, now I just have to spend more money on an ICS phone to get the features they advertise
Perhaps ICS will roll out to the Charge, but I'm not going to bet the farm on it. It would be interesting to try PPTP connectivity on JT's ICS build, but I do need the cellular radios to work so I haven't gotten around to trying it yet.
Click to expand...
Click to collapse
I think samsung screwed it up more than the OS.
xdadevnube said:
At this point, I essentially gave up on PPTP on the Charge (more specifically, Froyo and Gingerbread), but I did some testing on ICS the Galaxy Nexus. The Galaxy Nexus works fine with my DD-WRT PPTP server. I didn't notice any issues with it.
But yeah, on both Froyo and Gingerbread I could get a PPTP connection to link up, but no traffic would pass.
Thankfully it seems that Google got it right with ICS, now I just have to spend more money on an ICS phone to get the features they advertise
Perhaps ICS will roll out to the Charge, but I'm not going to bet the farm on it. It would be interesting to try PPTP connectivity on JT's ICS build, but I do need the cellular radios to work so I haven't gotten around to trying it yet.
Click to expand...
Click to collapse
Interesting, as my galaxy nexus on 4.0.4 is unable to effectively access my ddwrt based pptp Vpn server. With mppe encryption enabled, it won't connect at all. With encryption disabled, it connects but incoming traffic stalls like many people above mentioned. Nothing on the remote wan or remote LAN seem to be accessible from the phone as best as I can tell.
Ddwrt vpn server is configured correctly as my windows 7 PC can connect to it without a problem.
Haadkoe said:
Interesting, as my galaxy nexus on 4.0.4 is unable to effectively access my ddwrt based pptp Vpn server. With mppe encryption enabled, it won't connect at all. With encryption disabled, it connects but incoming traffic stalls like many people above mentioned. Nothing on the remote wan or remote LAN seem to be accessible from the phone as best as I can tell.
Ddwrt vpn server is configured correctly as my windows 7 PC can connect to it without a problem.
Click to expand...
Click to collapse
I dunno, but I just got it working on ICS 4.03 CleanROM Kang Tapped Edition for the HTC Rezound.
MPPE enabled.
It passes traffic, can browse the web, copy files from a network share. Connectivity does not get lost.
It does use the remote gateway.
I didn't check on if it was possible to set a local gateway.
Anyways, I've been waiting for this damned feature for quite some time.
If all you want to do is access your PC's files, I suggest PocketCloud Explore.
It is pretty tight.
Haadkoe said:
Interesting, as my galaxy nexus on 4.0.4 is unable to effectively access my ddwrt based pptp Vpn server. With mppe encryption enabled, it won't connect at all. With encryption disabled, it connects but incoming traffic stalls like many people above mentioned. Nothing on the remote wan or remote LAN seem to be accessible from the phone as best as I can tell.
Ddwrt vpn server is configured correctly as my windows 7 PC can connect to it without a problem.
Click to expand...
Click to collapse
there is a specific way to force Encryption on the PPTP server on ddwrt
More info.
http://www.dd-wrt.com/wiki/index.php/PPTP_Server_Configuration
Okay, for anybody interested, I did get successful VPN with encryption working on the Droid Charge with an app called VPNRoot:
https://play.google.com/store/apps/details?id=com.did.vpnroot&hl=en
Plus, this allows one to have no pin or pattern unlock, no lock screen at all actually.
It worked for me on both the Droid Charge with Tweakstock 2.0 and the HTC Rezound with an ICS ROM.
I paid for the pro version of the VPNRoot app by donating to the dev. Now I finally have the feature I wanted over a year ago when I got my Charge.
ICS works with VPN, but you have to have a pin or pattern lockscreen on your phone. If you disable the lockscreen with NoLock or via a tweak, you still have to enter your pin or pattern every time you click a notification....
VPNRoot does exactly what I want. For some reason at first I had trouble with it, but the latest version seemed to fix all the issues.
I haven't done thorough testing on speed yet, but hopefully will soon.
xdadevnube said:
Okay, for anybody interested, I did get successful VPN with encryption working on the Droid Charge with an app called VPNRoot:
https://play.google.com/store/apps/details?id=com.did.vpnroot&hl=en
Plus, this allows one to have no pin or pattern unlock, no lock screen at all actually.
It worked for me on both the Droid Charge with Tweakstock 2.0 and the HTC Rezound with an ICS ROM.
I paid for the pro version of the VPNRoot app by donating to the dev. Now I finally have the feature I wanted over a year ago when I got my Charge.
ICS works with VPN, but you have to have a pin or pattern lockscreen on your phone. If you disable the lockscreen with NoLock or via a tweak, you still have to enter your pin or pattern every time you click a notification....
VPNRoot does exactly what I want. For some reason at first I had trouble with it, but the latest version seemed to fix all the issues.
I haven't done thorough testing on speed yet, but hopefully will soon.
Click to expand...
Click to collapse
VPNRoot works great, thanks! I have the same issue on my Hyundai T7 with android 4.0.4, times out connecting to my VPN, but this app solves that problem.
I'm using vpn root on a s4 with stock ics firmware.
it can connect but times out all the time.
I can do google searches fine but trying to load any Web page just hangs.
have a pptp vpn on dd-wrt.
is there any settings I need to change?
If I run an app that accesses the internet after the phone has been idle for a while it frequently just sits there spinning for 15-30 sec or so before it starts downloading. The download speed itself is quite fast. This initial pause happens with many apps. Once it's working ok things are snappy until it sits idle again for a while. I have it set for never disconnect from wifi, and I'm using a fixed IP address (had it set for DHCP previously and no difference). I have no problems with the 3 computers running on the same router, and my ISP connection speed is very good. I have 4 bars on the wifi strength icon, and little if any death grip issue. Running pure stock, not even rooted.
Anyone else seen this or have any ideas what would cause it?
Edit: Fixed by setting phone and router DNS to Google servers (8.8.8.8 and 8.8.4.4)
Yeah I got too. I just turn data off and on again, that always do the trick.
Tried that trick and it did help, so good to know. But still an annoying bug and hassle to exit app, toggle wifi, and restart app. I guess it gives me something to do instead of just staring at the paused screen.
Hehe, but it will wear off. Mine is kinds stopped right now
So, is this happening to everyone or just a small percentage? Asking because the answer could determine if it's something on my phone or router I need to change, versus a HTC/Android bug. I've submitted a HTC bug report, but from past experience their tech support is less than worthless.
I used set dns from the market and opted for the google servier settings.
I used this app because I was getting pauses when loading up the market. Using the above app pretty much solves the delay issue for me.
kpjimmy said:
I used set dns from the market and opted for the google servier settings.
I used this app because I was getting pauses when loading up the market. Using the above app pretty much solves the delay issue for me.
Click to expand...
Click to collapse
Is Set DNS different than manually setting it under the wifi advanced settings? I have set mine manually to Google DNS and so far it's working better, but will take some time to see if it lasts. I'll update either way.
Thanks for the tip.
Update:
Setting DNS to Google DNS didn't solve the problem. Still getting very long pause on initial internet access after sitting idle for 15 minutes or so. Toggling wifi off/on does fix it, but that should not be necessary.
Is this common or rare? Really would like to know if it's a known phone bug, or my specific phone/router/ISP.
Based on so few responses I concluded it must be something in my setup. Ended up changing both the phone and my router's DNS to Google (8.8.8.8 and 8.8.4.4), which appears to have solved the problem. Oddly setting just the phone's DNS didn't fix it, it took changing the router as well. Also, it's not clear to me why toggling the wifi on the phone resolved the pause issue temporarily each time if the DNS server being used was the issue. But, if it's fixed I'll take it.
Thanks for the advice that did end up leading to a solution.
Just received my Nexus 5 today and I'm noticing some strange connectivity issues while on WiFi. Some apps would complain network is unavailable, Facebook would load with no pictures, etc. This happens randomly, sometimes after few minutes others - an hour(s). Rebooting the phone or even cycling WiFi off/on usually recovers it, until it happens again. Cellular data works fine all the time. It can't be the WiFi network I'm connecting to as I have a myriad of devices that have worked and continue working without any problems.
I tried 3 other WiFi networks (different routers) with different configurations of encryption as well no encryption, switching between 5GHz, 2.4GHz, no matter what, problem occurs sooner or later.
Noticed on Google support forums few users describing exactly the same issue, surprised I didn't find reports here on XDA. Maybe not many people got their phones yet.
Anyone else getting the same "treatment" from their new Nexus 5?
Sent from my Nexus 5 using Tapatalk
I am seeing exactly the same thing. Wifi will work great, then all of a sudden, nothing. Stays that way for a couple of minutes, then all of a sudden it works again.
How many bars does the sifi icon show ?
Number of bars doesn't matter. I can have full bars sitting a meter from the router and issue would happen anyways.
I tried playing with WiFi optimizations in advanced settings to no avail unfortunately. Hopefully this is a bug that Google can quickly fix with a software update
Sent from my Nexus 5 using Tapatalk
Same here. Got my N5 yesterday and experienced the same at home. Same for my brother.
Hope that gets clarified soon. Not the nicest feeling having a new phone with that (or any) kind of issue...
Yes, my N5 started doing the same on my home wifi connections (using Apple's Airport Extreme 2.4/5GHz router).
The Playstore or Youtube apps would not display images or take forever. When I switched wifi off those apps worked fine.
I got it working again when I "forgot" my wifi setting for the 2.4 and 5Ghz channels then reconnected to the 2.4. I'll let that run for a day or so then try activating the 5Ghz.
Hmmm... This may have been what was going on here...
http://forum.xda-developers.com/showthread.php?t=2516307
Is it similar to the issue I described?
http://forum.xda-developers.com/showthread.php?t=2515635
I usually don't have connection issues outright, but do have issues reconnecting. However I did notice I list connection overnight after I went to bed.
Sent from my Nexus 5 using xda app-developers app
Nah. Its no connection issue. We can connect easily and have full signal bars, but still no connection randomly for a couple of minutes.
Boonyard said:
Hmmm... This may have been what was going on here...
http://forum.xda-developers.com/showthread.php?t=2516307
Click to expand...
Click to collapse
Sound like it - yes.
pinksoviet said:
Is it similar to the issue I described?
http://forum.xda-developers.com/showthread.php?t=2515635
I usually don't have connection issues outright, but do have issues reconnecting. However I did notice I list connection overnight after I went to bed.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Hmm - no I don't think that's the one. Phone connects fine, just over time randomly does this thing with the connectivity issues.
--EDIT
OOPs my mistake...
I looked in Setting/Wifi/Advanced ...
I turned OFF "Avoid Poor Connections"
and everything seems to work the way i want ( when i tell it to go to Wifi, it does that )
--EDIT end
i added star to this issue because of same problem . If enough stars get added Google may get on it.
(Didn't know if I should create a new thread for this as it is a wifi issue but seems to be soemthing different than what the OP decribed, my issues are related only to playstore app downloading)
I too am having terrible wifi issues on my new Nexus 5. But mine are different from those described here I think. Whenever I cycle through the wifi, turn it off and on again it doesn't fix the problem (not temporarily and ofc not permanently)
When browsing the web, the play store and mostly everything it works great and is very fast, BUT when downloading or updating an app the wifi speed is practically non-existant.
Sometimes showing that it will take 25 hours to download a 25mb app :S
This while my Galaxy Nexus on the same wifi network is as speedy as ever.
I have tried factory resetting my Nexus 5, I have cleared the cache and data of the play services app and of the play store app, I have tried changing the wifi bands (from auto, to 5 to 2.4 and back to auto), I have turned off the wifi optimization, but none of those things helped. I even tried some DNS HSPC wifi settings thingy I read here
That didn;t help either.
I have unplugged my router and replugged it in but that didn't help either.
I literally had to leave my brand new Nexus 5 downloading all night just so that it could install the apps I wanted on it. So far for playing around with the phone on day 1
What makes it even weirder is that occasionaly the wifi issues resolve itself and I can get good download speeds for several seconds or sometimes up to a few minutes, but then right after it is straight back to crap speeds. Some other reported that only while making a portion of the map available offline in Google Maps their app download speeds were great, but that didn't work for me either.
I don't know what to do and if it is a hardware issue or a software issue. Please help me.
Below some info that might be useful to helping me solve this.
White Nexus 5 32GB
Bought from US play store
Shipped to and using it in the Netherlands
Currently does not have a SIM card inside (that is still in my Galaxy Nexus till the wifi issues are resolved)
Unrooted, only installed the mandatory update during the setup
All apps downloaded are apps that are also on my Galaxy Nexus which works without a hitch
Any and all suggestions/ideas/help are welcome
I think the problem somehow related to DNS. I found that if I configure static IP settings and point DNS to Google's instead router's, things work normally. I reconfigured my router to advertise 8.8.8.8 and 8.8.4.4 as DNS servers for the DHCP and now for over 24 hours I haven't experienced the disconnection issue.
If your router cannot be reconfigured, try assigning static IP settings and Google's DNS to see if it helps.
I still believe that's a software bug on the phone, we can't blame a device (the router) that has worked for years and works fine with everything else but the Nexus 5, being at fault.
Sent from my Nexus 5 using Tapatalk
I currently can't reconnect to my Wi-Fi at home as it's stuck showing the last scan I did some 40 miles away at a shopping centre earlier today.
Of course none of these networks are now present, yet all mine are shown as not found!
Guessing a reboot will fix it as toggling Wi-Fi didn't. Mobile data is working fine.
leobg said:
I think the problem somehow related to DNS. I found that if I configure static IP settings and point DNS to Google's instead router's, things work normally. I reconfigured my router to advertise 8.8.8.8 and 8.8.4.4 as DNS servers for the DHCP and now for over 24 hours I haven't experienced the disconnection issue.
If your router cannot be reconfigured, try assigning static IP settings and Google's DNS to see if it helps.
I still believe that's a software bug on the phone, we can't blame a device (the router) that has worked for years and works fine with everything else but the Nexus 5, being at fault.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Not as tech as I want to be, so could you explain to me what the difference is in setting the DNS to Google's instead of routers? I have no idea what DNS is/does so what happens when you point it soemwhere else?
WORPspeed said:
Not as tech as I want to be, so could you explain to me what the difference is in setting the DNS to Google's instead of routers? I have no idea what DNS is/does so what happens when you point it soemwhere else?
Click to expand...
Click to collapse
DNS stands for Domain Name Service. What it basically does is to translate those easy to remember names such as www.Google.com to the actual numeric address (also called IP address) of the server that serves that site on the Internet. Home routers almost always sport built-in DNS service to speed up name translation requests from internal devices. What I figured is going on on the nexus 5 is it "doesn't seem to like" some DNS servers. Works fine with some, doesn't with others. What happens is at one point, for whatever reason, it stops being able to translate names to addresses and as result "decides" there is no working connection as it fails to connect to the corresponding servers. Google hosts publicly available DNS servers with the easy to remember IP addresses of 8.8.8.8 and 8.8.4.4 which apparently Nexus 5 doesn't have problem working with. Once it gets "instructed" to use them instead router's, everything works fine.
At least that's what I figured is going on so far.
Sent from my Nexus 5 using Tapatalk
BTW, just found one small and very useful app that can display information about WiFi connection as well as DNS servers associated to it.
Sent from my Nexus 5 using Tapatalk
leobg said:
DNS stands for Domain Name Service. What it basically does is to translate those easy to remember names such as www.Google.com to the actual numeric address (also called IP address) of the server that serves that site on the Internet. Home routers almost always sport built-in DNS service to speed up name translation requests from internal devices. What I figured is going on on the nexus 5 is it "doesn't seem to like" some DNS servers. Works fine with some, doesn't with others. What happens is at one point, for whatever reason, it stops being able to translate names to addresses and as result "decides" there is no working connection as it fails to connect to the corresponding servers. Google hosts publicly available DNS servers with the easy to remember IP addresses of 8.8.8.8 and 8.8.4.4 which apparently Nexus 5 doesn't have problem working with. Once it gets "instructed" to use them instead router's, everything works fine.
At least that's what I figured is going on so far.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks, but that wouldn't fix my issue right, because it doesn't explain why only play store downloads are terribly slow while the rest works fine.
Gave it a shot and at first it seemed to work, but after a short while the problem re-arose
DNS has nothing to do with weak or lost WIFI connections...
You can be perfectly connected, at full n speed to a WIFI AP without getting proper acces to Internet : THIS can DNS isue.
But in no way a DNS isue can leads to lost or very weak WIFI signal.
2 solutions are possible with Nexus 5 :
- WIFI module has the same badly coded shape as camera one...
- its hardware related wich, no need to say, could be the worst case...
I am having the same issue since day one. In fact it just occurred as I was replying to this thread. Mostly occurs when the phone comes out of sleep mode. However it will occur often and at random.
Sent from my Nexus 5 using xda app-developers app