[Q] SMS texting issue: Only number shows up - General Questions and Answers

I haven't been able to find anyone else having this issue so I must have messed something up.
My problem is with the default text messaging app on android. I have the fascinate with the latest update. I have rooted my phone and debinged/lagfixed. I'd rather not do another factory reset but I can if I have to. The issue if I go to compose a new text message and choose the contact(lets say the name is Jane) Jane shows up in the drop down list as I type the name I select the name and type out a message and send it. Now when I go back to the lists of conversations only the phone# for that contact is listed and not the name. This is pretty annoying since so far it is only happening with a couple of the people I talk to the most and not others. Any ideas?

Related

[Q] Issue with Stock SMS App and Google Contact Groups

I wondered whether anyone else has seen this behaviour in the Stock SMS messaging app.
To set the scene I have a Vodafone Branded Sensation with the latest OTA applied.
When I create large text messages, so over 500 Characters which splits into 4 messages, I try and use a Google contact GROUP as the recipient. When I do this just before I click send I get the dreaded message "mms app has stop responding and needs to be forced closed".
I have no other option than to hit close, this then forces the app down and also doesn't save my mammoth message I just ticked in!!
Anybody else seen this happen, I swear it was working pre the OTA update!!??
EDIT: The same behaviour happens with Handcent SMS, which makes me think something more sinister is going on here!

Phone numbers instead of names in stock HTC messages

I seem to have a weird problem with the Messages app from HTC. Searched all over the internet and XDA and nobody else seems to have reported the issue.
The issue is, if I go into the Messages app, the list shows all contacts names fine. But for some contacts, if I click into them, it shows the message history, but on top where it's supposed to show the name, instead shows their phone number, minus any separators, and a ">" symbol at the end.
Say, for example, a contact in the Messages app is John Doe. I see John Doe in the messages list, then when I click into it, instead of name it goes to, say, 15555555555>, and sometimes the whole thing is just black.
On the bottom where I write reply, the number shows up fine exactly as it's formatted in the actual contact info.
But if I try to reply there, when I click "Send", the keyboard disappears, but the message never gets sent, and this happens no matter how many times I try to reply or type the message again. As long as it's a reply, it doesn't work. But starting a new message to the same contact works just fine, but it's annoying to have to type the whole message, then copy and paste, and start a new message to the contact just to reply.
And it wouldn't be inconsistent formats either. Some numbers I have in both Google and Phone, I can delete all phone numbers except the Google one in the problem contact and issue persists. Some contacts have the number laid out the same way in (xxx) xxx-xxxx as the problem contact, and still works. I can change the problem contacts' phone number format to xxxxxxxxxx or 1xxxxxxxxxx and neither fixes anything.
I've tried pulling the battery, turning off fast boot and pulling battery, restarting, all the same result.
And this ONLY happens with the stock Messages app, all the other SMS apps I downloaded off the Market works just fine.
Any help would be appreciated, it's starting to drive me nuts.
Thanks!
I have noticed something odd about the stock messaging as well. In the text box where you type, some contacts display a phone number in the top of the box, while some do not. I don't know what causes it. I thought it was the way that HTC Sense sync'd to FB, but that didn't change anything.
offdutyninja808 said:
I have noticed something odd about the stock messaging as well. In the text box where you type, some contacts display a phone number in the top of the box, while some do not. I don't know what causes it. I thought it was the way that HTC Sense sync'd to FB, but that didn't change anything.
Click to expand...
Click to collapse
I think it may have something to do with the Select Contact Name option when you edit a contact. Say I have a two phone numbers and an email address for Bob. Once I set "Bob" as the contact name for his entry, that it what appears when I start composing messages to him.
I hope this helps.
Sent from my HTC Sensation 4G using XDA App
I can confirm the issue, so at least you're not the only one. But in my case it went away on its own sometime between temp rooting and unsuccessful over clocking
I posted this a week or so, I don't know if it helped the last person. but I had this EXACT problem and it was unbelievably frustrating when I first got this and after a few days of searching and banging my head against the wall, I found something that worked. This problem arised when I had double contacts from my messaging and I tried to rectify it. Eventually I got it all to work fine.
This is how you solve it (or how I solved mine).
1: Sync everything to Google. Edit the contact list in google (use the automatic duplicate deletion), delete useless contacts etc.
2. Remove contacts from EVERYWHERE. Sim card, phone, uncheck google sync. Your phone should then be completely empty for contacts.
3. Re-sync with google contacts. if you want you can copy it back to the SIM and you shouldn't get doubles. I think I just left it with google only but the end result is I don't have 9 different "danny's" show up when I go to compose new message because I know three of them.
This issue is bugging me too...
After experimenting today I have figured out why it is happening; any contact I have with an email address within the contact details I get the name followed by the mobile number within the HTC stock message app... Any contacts without an email address are fine.
I have experimented by removing an email address from the contact and straight away the said contact will display correctly in the HTC message app.
Unfortunately I have not yet figured out how to have contacts with phone numbers and email addresses display correctly. Real shame as loving my new Sensation... a minor niggle I guess
Tgis has happened to my phone once, but rectified itself with a soft-reset. It hasn't happened again since then. Not much help here, but its definitely not an isolated incident.
Sent from my HTC Sensation 4G using XDA App
Yes, This happened with me too.... But after i synchronised my accounts with my HTC and google contacts.... it was all sorted out...i was just thinking of hard reset.... but i was saved Try it once...

[Q] Pls help me hack a setting to send a large # of work related SMS messages.

I use my device for work. I coordinate/schedule jobs in which there are many people who can work certain slots. So, I'll send out one text message to about 75-84 individuals. Then the ones who can work reply. Later, I send out another mass SMS advising of remaining slots to be filled.
My issue is this. In the Android code a section checks for the number of text messages send within the last hour. If you exceed 100 messages - then, Android throws an error for every message afterwards within that hour and the user has to select "OK" to send an SMS. So, at times I have to sit there and select "OK" over and over again for several minutes while the over limit SMS's are sent....
I found an old record on how to fix this issue here.
However, this APPEARS to be an old solution. I was unable to find this setting or the table "gservices" in "/data/data/com.android.providers.settings/databases/settings.db
Does anyone know where this was moved or how to change this setting?
My device is a an LTE Galaxy Nexus.
I'm running AOKP-build 33. But, I would think this setting would be generic to all of the current ICS ROMs.
Thanks for any advice.
BTW - I found some very old posts related to this same issue. Note:
1) Using an app will not address this issue (I use Chomp SMS) as this is coded within Android.
2) Google Voice will not work as it doesn't recognize "groups" for the "to" box.
3) Pulling the battery will just prevent all the texts from going out.
I'm just hoping someone knows where the file/code is located that I need to modify.
All other suggestions will not resolve this issue.

Flashed to [ICS] 4.0.4 and now can't text

I'm on the AT&T network and can't send texts anymore after flashing to ICS. I can make calls and use my data plan but am unable to send SMS for some reason. I've tried almost every APN setting recommended by others and still nothing. Does anyone have any suggestions or has had a similar problem that they resolved?
rev3la7ion said:
I'm on the AT&T network and can't send texts anymore after flashing to ICS. I can make calls and use my data plan but am unable to send SMS for some reason. I've tried almost every APN setting recommended by others and still nothing. Does anyone have any suggestions or has had a similar problem that they resolved?
Click to expand...
Click to collapse
Correction. I can receive text messages but not send them.
*UPDATE 9/11*
So I found out the issue is related to the Message Center which you can access from "Messaging" -> hit the option button -> Settings.
After flashing to ICS I noticed that this option has been removed so I can't edit the message center. Are there any ICS or JB ROMs that still have this option available to the user? I need to change the message center number back to what it needs to be in order to send SMS texts.
27 views and no responses? Anyone?
After a BUNCH of research I finally found out how to fix this. Instead of posting a to the thread I found (since I'm still under 10 posts) I will post my copied instructions.
Go to google and search for your SMS center number which should be based on the carrier you have.
Next, go to twit88.com/home/utility/sms-pdu-encode-decode
Scroll down to where you see SMSC, Receiver, and Alphabet size.
Put in the entire SMSC number, including the + sign into the box, leave receiver blank, change the Alphabet size to 8, and delete whatever is in the message box under Alphabet and hit Convert.
Now, on your phone go to the Phone info menu described above and scroll to the bottom and find the SMSC field.
Enter the first 16 numbers into that field and hit update.
Reboot your phone and you can now send SMS.
This fix is for people who have the proper modems flashed on there phones and can still receive texts but not send them.

Go sms pro private box: not working cause of the +1 area code

Dear all,
I am having some big trouble with go sms pro private box. I have the paid version. I added from my contacts all the contacts that I want to be private. It happened that when some of those contacts text me the message and notification are correctly private, while for others they are received in the normal folder (and have a standard notification). I double checked and the contact name and number were correctly displayed on the list of private contacts but the text appears in the normal received text message list. Only one slight difference: the number saved in the contact list is always different from the number on the received text underneath the name, and the difference is related to the international american area code. I was not able to figure out exactly which is the problem but basically sometimes I receive messages with the right name but the number (lets say 999-999-9999) shows up as any of these three
999-999-9999
1999-999-9999
+1999-999-9999
So basically if I save my number as 999-999-9999 sometimes I dont get it on the private box and it shows up with the rite name and with 1999-999-9999 or +1999-999-9999. Very wierd. And things got more complicated: I did a trial with my roomie: if I save his number as 999-999-9999 his texts do not go into the private box, and they show up with his name and 1-999-999-9999 underneath it. If I save instead my roommate number in my contacts as +1999-999-9999, in that case his text shows correctly up in the private box but with NO NAME on it!! So I cant do this since I have no clue who is texting me and I have to search everytime who that text refers to. I am driving crazy. Nobody had experience with this?
Thanks
A.

Categories

Resources