hi,
sorry for my bad english, i am french
I have rom update for my acer p300 (i have the phone for 4 day), update is: 2.002.03.FR.
The rom of my phone is: 1.004c.fr.
Launch the update for windows (i have tested in windows 7, xp and vista), the phone is connected, but i have this error" the software image file does not matched with your phone sofware".
I have tested phone power + camera button to launch update, but this error...
I have the file rom *.NB0, it's possible to flash from sd card?
I have cleaned the phone (power+ start), but the update not work.
if clean and press camera button for flash to sd, not work...
I have called Acer to help me, but, any idea for acer....
It's possible to help me?
Thanck you for you help
Patrice
hi
yes activ sync work.
i have my phone for 4 day.
the rom update is the rom for this phone, it's ok, i have verified ..
my phone no is simlooked.
thank
no hard spl on the phone.
it's possible to flash the phone by the *.Nb0 rom on the sd card?
arf....
you have some info that could help me?
thanck for your help
thanck you, go to read this tread.
patrice
i have tested, but, not work
thanck you for your help
Patrice
pbaranx
Hi
1.Hold down the camera and the volume up
2.Connect with p300 usb to computer
3.Go to Device Manager on your computer
4.Have a look at a driver p300?
5.Install the driver manually from the Rover
yes, yes, of Rover, do not panic))
6.Restart your computer and p300
7.Firmware Activ Sync http://global-download.acer.com/GDF...newTouch P300&OS=M02&LC=fr&BC=Acer&SC=EMEA_13
The progress bar on the p300 will not, the screen is dark
I updated the p300 with 0.003b.00
hi,
i have solved my problem...
I have installed holder version of update rom.
During install (program/Acer update tooo/), i have deleted the holder rom and i have putted my update rom in the folder and named it of the name of the holder....
Installation software update work, and the update it's ok, work perfectly.
Finaly is the problem is the new update program, nos my phone, and no the update rom.
special thanck to mishok_006 and M_T_M for your help.
Patrice
Salut Patrice, j'ai eu le même problème que toi, pourrais tu me dire ou tu as eu ton ancienne mise à jour STP ? Merci d'avance.
Hello Patrick, I had the same problem as you, could you tell me where you got your old update STP ? Thanks in advance. ...
Pascal
Hi, I have a similar problem with firmware update error. How can I solve it?
I solved the problem with help of mishok! Very Thanks
bonjour , HI
voilas je ne suis pas fort en anglais mais vous pourriez m'expliquer en francais
la je seiche meme probleme l'image n'es pas bonne.
donc je suis les manipulation de mishok, impossible de mettre la driver P_300
, est a quoi correspond le "rover" Merci thanks
hi to all and specially to mishok! can you tell me step by step how to flash in to p300 your russian rom? i have 2.005.02 italy vodafone in my phone. i download and install the same firmware from support, install it and swup original .nbo whis yours but all the time get wrong image massege (the software image file does not matched with phone software...), any idea what i do wrong?
mishok_006 said:
pbaranx
Hi
1.Hold down the camera and the volume up
2.Connect with p300 usb to computer
3.Go to Device Manager on your computer
4.Have a look at a driver p300?
5.Install the driver manually from the Rover
yes, yes, of Rover, do not panic))
6.Restart your computer and p300
7.Firmware Activ Sync http://global-download.acer.com/GDF...newTouch P300&OS=M02&LC=fr&BC=Acer&SC=EMEA_13
The progress bar on the p300 will not, the screen is dark
I updated the p300 with 0.003b.00
Click to expand...
Click to collapse
I have a new P300 for play around and I'd like to learn how to update/install modded roms, can I know what is rover?
Related
I noticed today that there's a new rom available for the P535. I guess it's the Windows Mobile 6 rom we've been waiting for... Probably an english (WWE) version for thailand.
ftp.asus.com.tw/pub/ASUS/IA/P535/P535_V4712_WWE_TH00_EXT_V120.rar
There's also a CHT (chinese traditional) rom there for hong kong and one for taiwan and also a file called P535-FW-V470.rar. I guess this is a new version of the phone firmware.
I'm half a world away from where I bought it (bought it in taiwan and P535 is not being sold in my country, so it could be difficult to find a service centre to fix it if I brick it). So I think I'll wait at least until it's "officially announced" on the ASUS website before I attempt the upgrade.
thank you for the information.
It's very long to download. I don't now if after i'll test it. But i post the link in a french forum. Maybe someone who like danger will try it.
I don't speak french so it would be nice if you could report back if someone tries it
I installed the phone firmware today, and it seems to work fine on the OS I have installed (4.3.15 WWE_AU00). The phone version is now v4.7.0.
Tested that Wifi and GSM/GPRS works. It seems to be a bit faster at connecting to the GSM network now.
i do it myself!!
same thing my firmware is now v4.7.
But with the rom com 2 files. But is not the .nb0 extension. So i rename the big one (69mb). Try to perform the update, but it still block in the middle of reading file.
There is another files, autorun.exe, who install a package, and reboot your phone. After that the phone still block at the first screen.
no luck.
I had to reinstall an old rom. :-(
Ok, the probleme is :
The Rom is to big for the phone
rom : 70mb
phone : 64mb
so we have to wait.
OK, thanks for trying.
ilan_75 said:
Ok, the probleme is :
The Rom is to big for the phone
rom : 70mb
phone : 64mb
so we have to wait.
Click to expand...
Click to collapse
But the phone has 256 MB ROM (64 MB i RAM memory).
It fits! I've allready checked!
Regards.
ROM WM6
NOUVELLE ROM WM6 EN FRANCAIS SUR LE SITE FTP DE ASUS
INSTALLE EN PREMIER LA ROM RADIO VERSION V470 APRES METTRE SUR UNE CARTE LES FICHIERS D'INSTALLATION DE LA ROM WM6 VERSION V4713
MEME SI LA ROM A 70MO L'INSTALLATION SE FAIT TRES BIEN ET LE P535 TOURNE BIEN JE LE TROUVE PLUS SENSIBLE ET JE RECOIS MIEUX
NEW ROM WM6 IN FRENCH , ENGLISH AND NEW RADIO
SITE ASUS ftp://ftp.asus.com.tw/pub/ASUS/IA/P535/P535_V4713_FRA_FR00_EXT_V121.ZIP
REESSAYER PLUSIEUR FOIS CAR IL EST ENCOMBRE ET DANS CE CAS IL DONNE PAS L'AUTORISATION DE CE CONNECTER IL N'Y AS PAS DE MOT DE PASSE
I decided to try anyway (it's easier to make decisions after a few drinks...)
It was a failure at first, and then it was a success.
Now my phone is running the thai WM6 rom.
details here:
http://forum.xda-developers.com/showpost.php?p=1352875&postcount=15
(Havent figured out why we all want WM6 though. Seems like not much is changed, if you ask me )
warning for those who has not updated to WM6 yet
it can ruin your camera
see below for photos taken by P535 with WM6
http://www.mobile01.com/topicdetail.php?f=222&t=357254&last=3122574
hi,
once update is done to WM6, would all the programs that work with WM5 still work with WM6, as in if i restore my back up file, would i get all my programs/applications back with full useability
thanks
I guess youre talking about spb backup.
ASUS says: Don't restore a wm5 backup.
I guess it will restore the wm5 registry and wm5 system files along with all other files and should mess up your device completely. (If it lets you restore at all)
The best way is to sync your contacts, appointments etc with outlook,
and backup your files manually,
then you can restore it by syncing with outlook and copying the files manually after you installed wm6.
Any software you have installed on your SD card will still be there after the upgrade, but there will be no links in the start menu.
Most WM5 software works on wm6, but some progs must be reinstalled, and a few programs just don't work on wm6.
Found at Acer download center:
rom update Android 2.1 Eclair:
Adress:
global-download.acer.com/GDFiles/OS/OS/OS_Acer_3.002.40.EMEA.GEN1EN_A21E_A.zip?acerid=634266796282691086&Step1=Smart%20Handheld&Step2=beTouch%20Series&Step3=E130&OS=a02&LC=nl&BC=Acer&SC=EMEA_18
dcr_42 said:
Found at Acer download center:
rom update Android 2.1 Eclair:
Adress:
global-download.acer.com/GDFiles/OS/OS/OS_Acer_3.002.40.EMEA.GEN1EN_A21E_A.zip?acerid=634266796282691086&Step1=Smart%20Handheld&Step2=beTouch%20Series&Step3=E130&OS=a02&LC=nl&BC=Acer&SC=EMEA_18
Click to expand...
Click to collapse
That link is offline. Does anyone know other link or anyone have that ROM in order to upload it to me by MegaUpload or something like that?
Thanks in advance.
as a "junior" member, not allowed to post links:
so,
Acer worldwide, choose Netherlands, service&support
download center, choose device, smart handheld, betouch series,
E130, tab OS.........
still there.........
The E130 don't want to upgrade cause i have a branded rom
on acer belgium i downloaded OS_Acer_3.002.50.EMEA.CUS2_A21E_E130 and installed on the phone of my daughter, and it works perfect, long boot but once up and running it runs fast.
Hello, my SKU is MBS but the rom is CUS2.
How to change it fot update?
i try with
3.002.40.EMEA.GEN1EN_A21_E130
3.002.50.EMEA.CUS2_A21E_E130
It don t work.
Helpp meeeeee
Check the OS version on your phone
- EMEA_CUS1EN: US/UK/Australia/Italy/Spain. Download from Acer worldwide > England/Spain
- EMEA_CUS2: Belgium only. Download from Acer worldwide > Belgium
- EMEA_GEN1EN: Norway/Sweden/Swiss/Austria/Denmark/Finland/Iceland/Luxembourg/Netherlands/Peru/Venezuela/NZ/South Africa/Vietnam/Portugal/Costa Rica. Download from Acer worldwide > Netherlands
- EMEA_GEN1RU: Russia/Ukraine. Download from Acer worldwide > Russia
- EMEA-CUS1FR: France. Download from Acer worldwide > France
and more... so you need to search on Acer worldwide website cho see which one is suitable for your phone's firmware
Goodluck
my phone is a branded phone (mobistar) i want to flash it with a no branded rom.
You need to extract .nb0 file from update and use RUT from A688 Tools ( just search in google or MU : megaupload.com/?d=IFO209MS )
Great that s work.
Very big thanks.
Hello,
I have the same problem, i can't pass on 2.1 and I tried a lot of way to succed...
I have a branded phone MOBISTAR too and so i try your way and it doesn't work for me...
I launch RUT and i'm going to "step 1" and when i want to choose the "firmware" my computer lag and say "tentative de lecture ou d'écriture de mémoir protégée. Cela indique souvent qu'une autre mémoire est endommagée." and it's not just that windows close automatically de window...
i'm gonna try again and again...
@ jihef which .nb0 did you use for your phone who was mobistar (belgium so)
thanks for helping me
acer e130 (mobistar)
Hi,
i tried to do it with the program rut (a688) then it asked me the firmware (nb ofiles) but i don't find them anyware, can somebody please explain the correct steps i need to take?
I am so new at this and don't know what the correct way to do it
programmes files/ acer e130 tool setup...
file is there if you install the upgrade on acer.be
e13 (mobistar)
Finaly it works!!
Thanks
Just one question, i can't open anymore clips from you tube??
Is that normal?
i've tried again this morning and it doesn't work, i'm on windows vista and every time i try select de .nb0 file (click on the case "..." on RUT programme) my laptop stop de RUT programme automatically (windows says RUT_V2 a cessé de fonctionner)...
does anyone have an idee?
sorry for asking again but i'm turning on crazy...
i think you need to use a Computer with XP for RUT, with my Seven, its same problem.
Sorry for english language, but it s too easy for me to explain it in french.
En francais, si vous avez des gsm mobistar cela devrait aller.
Tu lances l'installation du programme d'update de acer.
Quand c'est fini, tu ne flash pas le gsm, mais tu vas dans c:/programme file/acerE130 Tool setup et la tu trouveras la rom d'origine que tu copies ailleurs.
Ensuite tu lances le programme RUT, tu pointes la rom copiée précedement, et tu suis les instructions.
BM
PS: effectué sous seven sans problème.
jeromevdb said:
i've tried again this morning and it doesn't work, i'm on windows vista and every time i try select de .nb0 file (click on the case "..." on RUT programme) my laptop stop de RUT programme automatically (windows says RUT_V2 a cessé de fonctionner)...
does anyone have an idee?
sorry for asking again but i'm turning on crazy...
Click to expand...
Click to collapse
Indeed i had the same problem ,i tryed it with vista, no go! on xp no problemo (you need to run rut and the update program from acer at the same time) that did it for me
maybe it works also for you?
Hello!
Where did you find the update on Acer site? I cant find anywhere...
Please give me some light...
Thanks in advance
Just found today... Thanks!
Bought the phone three weeks ago, it was locked to 3 so i used wotanserver to unlock the phone to all other networks..
Any ways, for the best week or so i have been prompted with a update notification, so i'd plug the phone into my computer, run the update through pc companion but it would stop half way and prompt "servers busy" type message..
Last night the phone again prompted for update but this time via WiFi connection. So i clicked Agree and left it to its own devices..
And now i'm stuck with a Bricked phone, It wont switch on, no led's when plugged in, computer wont even recognise it
Only thing i can presume is the Wotanserver unlocking has corrupted the OS which has in tern done the same to my OS on update
Unfortunately, running OTA updates on a phone that's been tampered with (software wise that is) can result in owning a very expensive paper weight.
If you hand in the phone to a service center you will most likely be charged for the repair.
My best suggestion is to either hope for one of the experts here on this forum to see this thread or for you to look for other threads that already deals with similar issues.
I know I've seen a similar thread about bricked phones after trying to install OTA updates when the boot loader was unlocked. Pretty sure it was here on XDA but I cannot find it.
/Markus
help me please !!
Bonjour auriez vous une solution pour mon wt19i qui reste bloquer sur la fenêtre de deverouillage écran afin d’accéder au menu du Smartphone depuis que j'ai voulu installer ceci
http://forum.xda-developers.com/showthread.php?t=1707876
et depuis mon écran tactile ne fonctionne plus j'ai reflasher avec un firmware 40.2.A.0.62 sous Gingerbread mais rien ne change
j’espère avoir votre aide car je suis triste par avance merci :crying::crying:
Hi,
I bricked my 6039y when I tried to uninstall xposed framework. When I taped on "wipe cache/dalvik cache", wipe cache crashed and now I've got bootloop on "Alcatel One touch" and "Smart Move" :crying:
I had restored fastboot command (lost with last update), repartitioned internal memory... and I bricked it with a simple wipe...
I made a backup via TWRP but I haven't flash TWRP in phone... I'm just able to access stock recovery...
How I can restore my phone ? Only one chance with Mobile upgrade Q ?
Regards
ludz179 said:
Hi,
I bricked my 6039y when I tried to uninstall xposed framework. When I taped on "wipe cache/dalvik cache", wipe cache crashed and now I've got bootloop on "Alcatel One touch" and "Smart Move" :crying:
I had restored fastboot command (lost with last update), repartitioned internal memory... and I bricked it with a simple wipe...
I made a backup via TWRP but I haven't flash TWRP in phone... I'm just able to access stock recovery...
How I can restore my phone ? Only one chance with Mobile upgrade Q ?
Regards
Click to expand...
Click to collapse
Check with @petrov.0 He has a process he's been trying out with 6045 users to install TWRP similar to how he re-added fastboot. It's currently having some issues but perhaps having a 6039 user to test would help to resolve that. There is another "I bricked my idol" thread where he's been discussing the issues. Since he had it working for fastboot it may already work fine for you to reinstall twrp.
Ok, thanks, I go read his thread.
I downloaded his "6045i_debrick" archive, but I don't know if it's compatible with my 6039Y...
Can I try it without risk ? or wait @petrov.0 for instructions ?
Edit: Finally, I'm waiting for instructions
Hi,
I'm trying to restore with Mobile Upgrade Q 4.8.7...
ludz179 said:
Hi,
I'm trying to restore with Mobile Upgrade Q 4.8.7...
Click to expand...
Click to collapse
Good for you ... and for me too ... The files for flashing a recovery from download mode on 6039 are not needed at the moment.
My 6039 is alive :victory:
Now I can restore fastboot command and repartition internal memory, root, debloat...
ludz179 said:
My 6039 is alive :victory:
Now I can restore fastboot command and repartition internal memory, root, debloat...
Click to expand...
Click to collapse
hey, tu est français non?tu as fait comment pour que mobile upgrade le detecte j'ai le même tel que toi et il n'est pas detecté.. j'ai accès au fastboot et au TWRP, sinon si ton tel remarche tu peux me faire une backup via TWRP pour que je puisse ravoir mon tel vivant
Salut, j'ai juste suivi les instructions de Mobile Upgrade Q, j'avais le recovery d'origine.
Je peux te faire un backup avec TWRP, juste besoin de l'image système de 1800 Mo ?
Hi, I just followed Mobile Upgrade Q instructions, I had stock recovery.
I can make you a TWRP backup, just need 1800 Mo system image ?
aucune idée de ce qu'il me faut, fait tout sauf le recovery xD si sa marche je t'aime <3 (pour mobile upgrade, j'ai plus du tout accès a l'adb sûrement a cause de sa)
---------- Post added at 01:29 PM ---------- Previous post was at 01:05 PM ----------
vous pensez pouvoir la mettre en ligne avant ce soir?
I guess you did not have any access to adb before using the recovery tool? That might be a good news for other bricked people.
@aaazote: I hate to give lessons but can you please at least translate your sentences in both english/french? Your discussion might be usefull for non french speakers. And I guess that if you're on XDA, that means you speak english.
Je n'aime pas donner de leçons mais peux-tu au moins poster en double trad. Anglais/français ? Tout ce que tu écris peut aider d'autres personnes qui ne parlent pas français. J'imagine que si tu es sur XDA, c'est que tu pratiques un minimum l'anglais.
Merci
Sent from my 6045Y using XDA Free mobile app
ok sorry ! i want a backup before monday, it's been two weeks i don't have mobile
d'accord désolée ! j'ai besoin d'un backup avant lundi j'ai tenu deux semaines sans tel et j'en peux plus xD
aaazote said:
ok sorry ! i want a backup before monday, it's been two weeks i don't have mobile
d'accord désolée ! j'ai besoin d'un backup avant lundi j'ai tenu deux semaines sans tel et j'en peux plus xD
Click to expand...
Click to collapse
Pas de souci. C'est juste que ce forum m'a tellement apporté...
No problem, it's just that that forum brought me do much!
Sent from my 6045Y using XDA Free mobile app
Mobile 4.8.7 Upgrade Q does not work.
"There is no greater software version available to upgrade your phone, actual version of your phone is the latest."
http://kepfeltoltes.hu/151004/Capture_www.kepfeltoltes.hu_.png
Can i flashed stock system with QFIL?
I installed the last update OTA. Then bootloop. I return the fastboot commands. But I can not go to the bootloader.
idol 3 4,7" 6039
Hi,
For Mobile Upgrade Q, I followed these instructions http://forum.xda-developers.com/idol-3/general/return-to-stock-firmware-recovery-t3216077
I will upload TWRP system image this evening.
ludz179 said:
Hi,
For Mobile Upgrade Q, I followed these instructions http://forum.xda-developers.com/idol-3/general/return-to-stock-firmware-recovery-t3216077
I will upload TWRP system image this evening.
Click to expand...
Click to collapse
"aucun appareil n'est détecté"
"no phone detected"
Here my system image with TWRP backup https://drive.google.com/file/d/0B870NxZ7n4GCN0lXSUlxY2NJTGM/view?usp=sharing
ludz179 said:
Here my system image with TWRP backup https://drive.google.com/file/d/0B870NxZ7n4GCN0lXSUlxY2NJTGM/view?usp=sharing
Click to expand...
Click to collapse
You need system image + boot....I didn't look to see if boot was in there.
Apparently if you tell the alcatel site you have a "pixi" you get a newer version of the Mobile Q software which works well with both the 6039 and 6045...details here: http://forum.xda-developers.com/showpost.php?p=63134915&postcount=15
Hi,
sorry, only system image...See that this evening.
One chance with last Mobile Upgrade Q version.
Hi,
Here a TWRP backup with boot + system image
https://drive.google.com/file/d/0B870NxZ7n4GCaGlWTzdvaFVyZmM/view?usp=sharing
Help me.. anybody here can help me to fix my tab fonepad 8 brick usb logo.. how i find firmware file such as ifwi, dnx, os dnx and os image? i cant found that file in official rom...
Is your tab fixed?
What happen to your tab now, is that allright?
Yes.. it allright.. my problem is resolved
Whyts86 said:
Yes.. it allright.. my problem is resolved[/QUOTE
Bro, can you tell me how you fix it?
bro, bisa kasih tau caranya gak?
thanks
Click to expand...
Click to collapse
sundulll.....siapa tau dapat pencerahan
up, maybe i get answer here from asus lover
Check group official group fonepad 8 indonesia (or other 'group official lounge... "). I had that peoblem and found the solution there. I couldnot post di url because im nrw here
The instructions is clear and you could find the files needed
HI
my asus tablet is Fonepad 8 (fe380cg).
DiroidBoot not running and stay on INTEL INSIDE logo.
i read this forum and do it
http://4pda.ru/forum/index.php?showt...ost&p=52946315
during flash by xFSTK Downloader like this Error appear
https://forum.xda-developers.com/sho...&postcount=105
i need Fonepad 8 (fe380cg) firmware .bin file ( Fw_Dnx IFWI OS_Dnx OS_Image ) for flash by xFSTK Downloader.
what is GP Flag override for my tablet?
DiroidBoot not running and stay on INTEL INSIDE logo.
Please Help Me
Thanks
firmware .bin file ( Fw_Dnx IFWI OS_Dnx OS_Image ) for flash by xFSTK Downloader.
sahbarayan said:
HI
my asus tablet is Fonepad 8 (fe380cg).
DiroidBoot not running and stay on INTEL INSIDE logo.
i read this forum and do it
http://4pda.ru/forum/index.php?showt...ost&p=52946315
during flash by xFSTK Downloader like this Error appear
https://forum.xda-developers.com/sho...&postcount=105
i need Fonepad 8 (fe380cg) firmware .bin file ( Fw_Dnx IFWI OS_Dnx OS_Image ) for flash by xFSTK Downloader.
what is GP Flag override for my tablet?
DiroidBoot not running and stay on INTEL INSIDE logo.
Please Help Me
Thanks
Click to expand...
Click to collapse
Hi. I also need this all files. I really need it to flash my zenfone 8. Please help. I tried to search the indonesian group but find none.
request
Whyts86 said:
Yes.. it allright.. my problem is resolved
Click to expand...
Click to collapse
Comment avez vous pu résoudre votre problème car apparemment je suis dans ce même cas et il me faudrait impérativement des fichiers dnx_fwr et accessoirement de dnx_osr pour exactement le FE380CG ?
J'ai du essayé flasher avec les fichiers de FE375CG mais cela ne marche pas.
Merci de votre compréhension.
How could you solve your problem because apparently I am in the same case and it would be imperative for me dnx_fwr files and incidentally dnx_osr for exactly the FE380CG? I had to try flashing with FE375CG files but it does not work.
Thank you for your understanding.