Hi, I am having a weird issue with ervius kitchen 1.8.2 building for a cdma touch pro. I have set it up right I think, and I have no problem building a wm 6.1 rom. However when I build a 6.5 rom the rom will boot ok, but I ma missing stuff. Like the link for powerexe.exe in the settings folder, and windows installer, usb connectivity and random apps mostly required system apps. I het no errors during the build, and with powerexe.exe the app is there, and will run if you use a file explorer and click on it.
Yet every thing works correctly in a 6.1 build. I even tried building a 6.5 rom using the 6.1 core, it booted ok but had the same things missing.
Any idea what I am doing wrong?
Related
Hey All,
I just installed those updated drivers on my wizzard with mfrazzz's Crossbow Reloaded 1.5 rom. After a reboot I can't start bluetooth anymore. Are there some regkeys I have to change to get this working? I can uninstall the package to see if it will work again with the bluetooth drivers in the Crossbow Reloaded 1.5 rom, but that'll be the easiest way.
Hopefully anyone can help me.
Thanks in advance.
The CAB file in question
Considering that cab file is from the Hermes/ WM6 Black ROM, it's probably NOT going to work on a Wizard.
Based on looking at the cab, it replaces 4 .dll files. My guess is that those are not compatible with the Wizard drivers. Just do a remove program and see if that fixes it. If not, then delete these four in \Windows and you should go back to the ones that were built into the rom:
serial_btur.dll
OEM_Misc.dll
btagext.dll
bthuart.dll
mfrazzz, do you maybe have a cab file for the bt drivers in your rom?
Hmmz, your tip worked. Thanks. I simply renamed those files to *.org and that did the trick. But maybe a question though, aren't there newer BT drivers for our wizzard?
You are a total @#$%$#@. What would make you think they were even for the wizard? And those bt drivers never even helped the the problem that black was having on the hermes. You need to do some more reading buddy. Lets not end up with bricks here
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
yep
Yes am running the helmi rom myself and all is working well. Check which version of the BB client you have installed, perhaps that is a possible reason.
But works well with the vario III model and said rom installed...
I'm using the newest version 41.0.0.84 posted on HTC site. What version is yours? Did you flash a Hard SPL? or a SSPL? before flashing to the Helmi Cooked Rom?
paulesport said:
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
Click to expand...
Click to collapse
Change the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU
and it should be fine.
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
I too am interested in a solution...
paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
Followed these instructions after a hard reset and still no luck. I have the same problem as the others, after step 5 it would connect for a second or so, and then disconnect. So it was back to the HTC Rom.
Sometimes the rom needs to be Hex edited to show that its AKU 4.2 I am sure if you ask Hemli he might do this for you in a future release. I am sorry to say but this is one of those issues that some have beening that the roms we have on this forum have not been made for public release since the 3rd party software has not been properly set up to run with it.
tytn II
Hi all orange uk are releasing tytn II with BB connect version 91
get it here but if you want to use internet explorer you need to edit the registry to disable the proxy for autho connect
if you ahve a look atthe following post it wxplains all
steven
http://sems.org/content/download/bbc4/BBConnect_WM6_Professional_BB_4.0.0.91.cab
also
http://www.sems.org/entry.asp?ENTRY_ID=248
steven
i also found that you have to register the sim card number and imei number in the network i is bb way of protecting licence
i got an upgrade but did not register new sim just used old sim would not work but still worked on old phone eventually spoke to level two in orange and they registered new sim it worked
it is bb s way of proyecting licence
steven
any problems let me know
w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
I can confirm that these instructions do work with Duttys hybrid no.3 ROM. The only difference is that I installed BBC V4.0.91 version mentioned in this thread.
By the way thank you KarmaNP it did work. I went back to check on what I entered and had too many periods (.)'s when changing the AKU. Make sure that 0.4.2 shows and not .0.4.2 which was my mistake.
Hi all,
I've noticed the recent flurry of 6.5 ROM's in the last few days on these boards but noticed that they have been for specific devices. Are there any enterprising ROM cookers out there that could cook up a ROM for the Microsoft Device Emulator?
I and i imagine the rest of the board would be very grateful for this
Im looking for ROM like this too, but nobody made ROM with WM 6.5 for MDE :/
it will released soon i think.
Its here!
http://www.microsoft.com/downloads/...1d-97a8-4f80-bc6a-ae010e085a6e&displayLang=en
was wondering, can you just download the sdk and ms emulator v.3
(http://www.microsoft.com/downloads/...AF-12E3-4B2F-A394-356E2C2FB114&displaylang=en)
to make it work without installing virtual pc 2007 (http://www.microsoft.com/downloads/...02-3199-48a3-afa2-2dc0b40a73b6&DisplayLang=en) ?
i cant seem to get the cellular emulator to work. so i cannot connect to the internet through the phone. any ideas how to make this work? using Windows7 BTW.
next question, if i install a Cab that requires a restart will the installed files "stick"?
Hi guys,
I've installed WM 6.1 by Xion and it's running perfect in german
It's just one problem left. I don't have MMS anymore. Even after a hard reset nothing will be installed.
So what can I do? As described, Arcsoft's MMS should be in the version, but it isn't.
What can I do?
Which Version did you use? 0.6.7 with M2D does not have MMS. You should download the Kitchen (Version 0.7) and make your ROM with MMS. This kitchen is extremly easy to use!
I'm really, really sorry if i posted this in the wrong section or what else.
I'm having problems using the Gen.Y dualboot system on my kaiser, I installed the CAB for the HTC Kaiser.
It works... but only when opening the bootmanager when Windows Mobile 6.1 is already booted, there is no way to first load the bootmenu from Gen.Y and then choose to boot Windows Mobile or Android.
The Android is installed correctly and the registry is set well to boot from the Andboot map on my SD card so there's no problem booting android.
It's just that the bootmanager doesn't startup when turning on the phone.
(I'm running Eclair 2.1g Polymod Light-Themed)
I hope someone can be of help and i really appreciate whoever even thinks of answering a possible solution.
Syntax1993