Hi guys,
I've installed WM 6.1 by Xion and it's running perfect in german
It's just one problem left. I don't have MMS anymore. Even after a hard reset nothing will be installed.
So what can I do? As described, Arcsoft's MMS should be in the version, but it isn't.
What can I do?
Which Version did you use? 0.6.7 with M2D does not have MMS. You should download the Kitchen (Version 0.7) and make your ROM with MMS. This kitchen is extremly easy to use!
Related
dear all,
finally i have upgrade my o2 mini wtih
rom: 1.13 wwe
Radio: 1.13
Ext rom: 1.13.wwe
and with bigstorage also.
but miss one thing, smart dialing cab. can anyone help me to post all the cab that i need to installed on my o2 mini. because i lost my Original Extended rom from O2mini.
and also i want to listen music through bluetooth headset (bluetrek G2 1.1)
how can it be done? i have search through the topic about Bluetooth stack but i got confused on the way through. please help me summarise what should i do and need in a simple english.
thank you all.
O2 plus
hi again,
i forget to mentioned o2 plus. i have installed o2 plus on my o2mini which has latest Tmobile rom (upgraded).
it always tells me that this application is only for Xda O2. is there anyway that i can change back from tmobile to o2 without changing back my rom and radio version.
thank you again
There are quite a number of ExtROMs in the ftp. I can't help you with A2DP since I don't use it.
ftp
btw can you please help me how to access the ftp for magician i cant connect to ftp. please explain in a simple english
thank you
Click on the wiki link on the upper left corner and it will lead you to the ftp site. Be sure that you are logged on.
Customise Operator
hi again
how to install the auto config operator (asia) on my o2 mini?
i have download the auto config cab file on ftp. after i install all the cab file, it won;t shows up on the auto config list box.
Customise Operator
hi again
how to install the auto config operator (asia) on my o2 mini?
i have download the auto config cab file on ftp. after i install all the cab file, it won;t shows up on the auto config list box.
Did you soft reset your unit?
auto config
yup i already soft reset.
auto config
yup i already soft reset.
Most of the Ext ROM customizations require to be installed in the main RAM.
After a lot of roms and backups i had find a issue with this cab
http://forum.xda-developers.com/showpost.php?p=1492423&postcount=3
becouse i isntaled on my wizard and it makes a wifi isuue it can not be able to turn on
tested on the wrcx 3 , pandoras box 1.1 , Wm5 aku 3.3 clean and T-mobile aku3.3 rom
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
yep
Yes am running the helmi rom myself and all is working well. Check which version of the BB client you have installed, perhaps that is a possible reason.
But works well with the vario III model and said rom installed...
I'm using the newest version 41.0.0.84 posted on HTC site. What version is yours? Did you flash a Hard SPL? or a SSPL? before flashing to the Helmi Cooked Rom?
paulesport said:
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
Click to expand...
Click to collapse
Change the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU
and it should be fine.
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
I too am interested in a solution...
paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
Followed these instructions after a hard reset and still no luck. I have the same problem as the others, after step 5 it would connect for a second or so, and then disconnect. So it was back to the HTC Rom.
Sometimes the rom needs to be Hex edited to show that its AKU 4.2 I am sure if you ask Hemli he might do this for you in a future release. I am sorry to say but this is one of those issues that some have beening that the roms we have on this forum have not been made for public release since the 3rd party software has not been properly set up to run with it.
tytn II
Hi all orange uk are releasing tytn II with BB connect version 91
get it here but if you want to use internet explorer you need to edit the registry to disable the proxy for autho connect
if you ahve a look atthe following post it wxplains all
steven
http://sems.org/content/download/bbc4/BBConnect_WM6_Professional_BB_4.0.0.91.cab
also
http://www.sems.org/entry.asp?ENTRY_ID=248
steven
i also found that you have to register the sim card number and imei number in the network i is bb way of protecting licence
i got an upgrade but did not register new sim just used old sim would not work but still worked on old phone eventually spoke to level two in orange and they registered new sim it worked
it is bb s way of proyecting licence
steven
any problems let me know
w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
I can confirm that these instructions do work with Duttys hybrid no.3 ROM. The only difference is that I installed BBC V4.0.91 version mentioned in this thread.
By the way thank you KarmaNP it did work. I went back to check on what I entered and had too many periods (.)'s when changing the AKU. Make sure that 0.4.2 shows and not .0.4.2 which was my mistake.
Hi guys, I am having issues with MMS on this rom JustStable V2 Build 8 Windows Mobile 6.1. Everything on the rom works beautifully but mms. I did search and it seams you can install arcsoft mms. So i did do that and run the network manager and so on. but when i try and send an mms it gets to a 1certen percent and then stops and gives an "unable to send message" error. Is there any thing else i can do to get this working? anyone have a work around? Thanks in advance.
1st make sure its installed on ur phone memory NOT sd card. make sure u reset when it says and select ur country. hope his solves ur problem.
I got a thread here that may be of help
http://forum.xda-developers.com/showthread.php?t=560055
Wrong subforum and answered.
This is not development related.
Hi, I am having a weird issue with ervius kitchen 1.8.2 building for a cdma touch pro. I have set it up right I think, and I have no problem building a wm 6.1 rom. However when I build a 6.5 rom the rom will boot ok, but I ma missing stuff. Like the link for powerexe.exe in the settings folder, and windows installer, usb connectivity and random apps mostly required system apps. I het no errors during the build, and with powerexe.exe the app is there, and will run if you use a file explorer and click on it.
Yet every thing works correctly in a 6.1 build. I even tried building a 6.5 rom using the 6.1 core, it booted ok but had the same things missing.
Any idea what I am doing wrong?