[Q] N95 bluetooth head - Galaxy S I9000 Accessories

EDIT:Topic should be N95 bluetooth headset
I failed to connect to a N95 bluetooth headset with my SGS. Does anybody have a clue as to what the problem might be? I've tried all the standard pin codes, so that's not it. I've had my phone set to visible just before holding down the button on the N95 to turn it on, etc. etc., feels like I've tried everything.
Is there any fix to this or does anybody have a clue wy it won't work?
Both devices function properly with other devices.
edit2: The phone says that the pin or password is incorrect.
Thanks,
-Max

Related

BT25 Stylish Necklace Headset ... Can I get it to work?

Answer: NO
Ok I've done everything 10 times over, got it to bond, but there's no way the XDAII is sending a call over to it either bonded as a headset or as hands free. Have successfully bonded the PC and a Rikaline GPS using Towas Patch .... so what am I doing wrong ... or am I to wait to the next version of the patch that will include Headset handling (the blanked out pic)?
Anyone else got the BT25 working - the box says it works with the XDAII .... I feel a bit stupid sitting here with a headset on that doesn't work!
Are you enabling "bluetooth headset mode" on the main Today screen, it is easily overlooked.
Yes done that one to bits. Even did I hard reset last night to see if basic Mobile 2003 (with nothing added or taken away) would do it. It didn't so I did a restore.
I suppose the headset could be faulty, but bearing in mind the problems that are most of us are having in one form or another with BT, I guess it probably aint! It also does bond as either a headset or a handsfree (I was reading on here there is a difference). I'm puzzled, coz it should be working!!!
Did you try to bond the headset without towas patch, also when the xda2 finds the headset does it announce that the device supports headset profile? The only other thing I can think of is to check that bluetooth is on rather than in discover mode. The bluetooth stack ont eh xda2 sucks big time, but it wont be long before they release the solution so hopefully we should be able to use it as it as designed to be used, I could never understand the logic of releasing hardware capable of so much then using brain damaged software to cripple it.
Ok - swapped out the set at my supplier today and still no change. It bonds and asks for the BT access code which I enter correctly and it appears in the BT bonded list with the GPS and PC. It still doesn't pass over calls, even if I try a manual intervention by pressing on of the keys on the headset as instructed. I've ticked the headset and tried headset mode bonding and handsfree bonding. I've also tried bonding from the discoverable mode in the on mode.
I've also tried a complete hard reset last night and then bonded with the same result.
Think I've exhausted this one and am going to wait for the 02 Rom upgrade (or is that really a Microsoft one)?!
Stop -press ... it just seems to have started working in headsetmode ... not handsfree .... I am trying to work out why ..... this has been 3 days of trying!!! Maybe the original headset really was the problem

sennheiser vmx100 problem

i'm trying to pair the headset with the diamond.
after i entered the pin code (0000) i get an error message: "your device did not connect with VMX 100. the connection failed or the passcode is incorrect".
i tried several times but nothing.
with another phone (nokia 6210) it works OK.
someone?
Sennheiser VMX100 is incompatible with Touch Cruise.. This is known issue...
Sorry, but maybe incomp. with Diamond too...
what the [email protected]%k?
SENNHEISER BLUETOOTH FLX 70 IN EAR FLX70 doesn't work too????
i never heared about that.
bt headset that not work with every phone.
is there a way to fix it?
changing the radio version will work?
Vmx 100 Does Work With Diamond
ishaked said:
i'm trying to pair the headset with the diamond.
after i entered the pin code (0000) i get an error message: "your device did not connect with VMX 100. the connection failed or the passcode is incorrect".
Click to expand...
Click to collapse
OK, I managed to suss this out, it was purely by accident as this it totally counter-intuituve.
When you go to pair it, the phone finds it and asks for the password, DON'T enter one, just hit the NEXT button. Two things will happen, first it will actually go "Ping" and a screen will come up telling you the headset wants to connect and asking for your password, which you then enter and it pairs AND second, it also pops up the nasty message about not pairing but by this stage it has already paired so it is no issue.
bit of a flaky implementation, but once paired it works OK.
Nice find
flashgordonv said:
first it will actually go "Ping" and a screen will come up telling you the headset wants to connect and asking for your password, which you then enter and it pairs AND second, it also pops up the nasty message about not pairing but by this stage it has already paired so it is no issue.
.
Click to expand...
Click to collapse
i only get the nasty message.

			
				
Thanks Flashgordonv - finally got VMX100 to work on my HTC Touch Pro
flashgordonv said:
OK, I managed to suss this out, it was purely by accident as this it totally counter-intuitive.
Click to expand...
Click to collapse
Beautiful catch!! I had the same problem with a Touch Cruise, and these instructions worked like a charm.
Thanks.
i have the same problem, i own a HTC Touch Pro and i cant pair the headset.
i get too nasty messages and no paired device
Dear sir,
1. I have purchased a VMx 100 sennheiser bluetooth headset. wish to pair it with my Dell streak. It pairs up well. But when call comes, there is no transfer of audio. Will anyone can help me in solving this?
2. VMX 100 manual says that if user wishes to use same bluetooth headset with second device (in my case notebook), it shud be paired manually. Dont know how to do?
because my notebook doesnt recognize VMX 100 signal at all.
how to go about?
thanks

Bluetooth turns off randomly

Hi,
I am using my HTC Touch Pro with an Opel Vectra built-in bluetooth carkit.
All functions, like browsing the address book and call registers, are working fine. However, at random times, my carkit reports no phone. When I then check my Touch Pro's bluetooth status, I see that it is has been disabled.
After manually re-enabling it, I can pair with my carkit for as long as it takes for bluetooth to turn itselves off again.
I've already tested with JETware, but that does not change anything. Also tried the universal broadcom bluetooth stack, but doesn't seem to work on the Touch Pro. HTC only comes with a standard answer that they don't support all carkits and headsets... Since the BT stack on the phone seems to crash, I don't think it's a carkit issue.
Anyone here with the same issue? And maybe a solution?
Thanks and regards!!
Start -> Settings -> Connections -> Bluetooth -> Timeout (tab). Turn off Visible mode set to "Never".
I think this must be your problem.
Hi Freco,
Thanks for your reply! This option is set. However it's not really the visibility that turns to invisible, but the whole bluetooth stack is being turned off completely. Need to fully re-enable it via Comm Manager.
Any other options? Does anyone know if there is a working broadcomm stack for the Touch Pro?
Regards!
Hi,
I have exactly the same problem with a Vauxhall kit, I have tried all sorts of things, but nothing seems to work
try:
start -> settings -> connections -> bluetooth
timeout tab
select 'never' from drop down box
Hi Brendo,
Unfortunately this doesn't solve the issue. Once paired, the connection even works without being visible. It's also not a fixed period of time before the disconnect takes place (can be within a minute, sometimes after half an hour). However, the whole bluetooth icons disappears from the top icon bar and comm manager shows it's turned off completely.
Hope somebody has any other ideas, because the only thing HTC can do is point to the carkit vendor :-(. Since all functionality is there when connected and the phone is turning off BT in some way, I really don't think this is caused by the carkit vendor. I should at least expect BT to stay enabled on the phone.
Thanks!
Yes, same here, BTW I have tried this in my Friends Saab, and the same problem.
same problem here with a Opel DVD90 buildin bluetooth carkit.
With other htc phones it always worked like a charm, but my mda vario IV continuously disconnects after a random time period and shuts down the complete stack.
Try this!
I have the same problem with my opel with original bluetooth-kit (2007). On the touch pro I changed the band and network from auto to GSM, as G3 reseption in this area is quit poor, especialy while driving. It helped for me, at least the last few days. I agree this has been an annoying problem.
I have tried to switch to "GSM only mode" in the past, but as far as I remember it does not completely solve the issue. However, I will give it another shot! Actually I can't figure out at what point it occurs... It can happen within a minute or after half an hour without using any funtion.
Does one of you know if there is a way to do some debugging on the Bluetooth stack?
And has anyone experience with other Windows Mobile 6.1 based phones in this combination (just curious if it's a WM issue or HTC only)?
Furthermore I did some tests with JetWare. You should be able to limit the number of synchronised items then (might be related to this issue). However, it looks like this configured limit is being totally ignored: when I limit my recent call list to 5 with JetWare, it still syncs about 25 items. Anyone tested with Jetware?
I have tried the GSM only mode, this didn't help either
I have now given up and got myself a Nokia E66, which works perfectly.
All contacts are pushed to car, no disconnects and AD2P works so my mp3 ringtones play through the car speakers! Sweet
Word of note, I had issues with N-Series phones, would connect ok, but contacts would not push.
I have the samen problem with my HTC Touch Pro and Saab.
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
ExTREmE99 said:
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
Click to expand...
Click to collapse
I am having the same problems you describe. Anyone got an suggestions???
I encountered the same problem; first with an opel udp carkit and next with the bluetooth interface software from homeseer.
It has something to do with phone signal loss.
With the opel carkit I noticed bluetooth automatically turns off when the phonesignal switched from 3g to gsm.
I also noticed that in my home, BT turns off whenever I have been in a room with no phone-signal reception.
try this thread, both registry change and attached cab file, reset. DOn't worry if the make visible to all option is unchecked.
http://forum.xda-developers.com/archive/index.php/t-314996.html

Jabr BT250v Bluetooth Troubles

I'm having trouble with my Jabra BT250v and my Fuze. The Jabra always worked perfectly with my Nokia phone so I don't believe it's a problem with the unit. The first oddity I noticed is that it paired automatically without asking for a code. After researching this I found out that the new Bluetooth driver does this by design with non secure items like headsets and such by trying a series of commonly used codes like "0000", "1234". That's all good and well, and it does seem to pair up, but I've read that other devices have trouble being bombarded with codes like that and even though it shows up as paired, it doesn't work. I'm not sure if this is the cause of my problem or not, but is the only obvious thing I could pick out.
I've tried putting the ear piece back into the charging cradle to reset it before trying to pair it. I've tried the standard pairing procedure by turning the device on by holding the power button for 8+ seconds until the light goes solid. I've tried the alternate method of holding both the power and volume up button to pair it in the handsfree mode. I've manually set it to handsfree mode once the device is listed on the phone. I'm really out of things to try to get this going.
Basically it pairs and all looks good but I don't get any sound out of the unit and trying to initiate a call or redial does nothing. The phone just keeps going as if it never paired up at all. I'm hoping someone has some more ideas I could try as I would really like to get this working. I wasn't sure if there was a way to just re-install the Bluetooth stack, or even an alternate Bluetooth driver I could try. If it does have something to do with the auto-pairing feature, does anyone know how to disable this? I'm willing to try damn near anything that can help me pinpoint the problem. I haven't been able to locate any Bluetooth troubleshooting tools and even looked at the service manual, but they just put it through a simple test and it doesn't delve into anything deeper.
Lastly I should mention that I am able to use Active Sync over Bluetooth with my laptop and it does ask for a pairing code so I'm really stumped. I guess it is a possibility that the Jabra is messing up since I last used it with my Nokia about 2 weeks ago, it just seems highly unlikely. Any help would be greatly appreciated.
Many Thanks,
Eidolen

[Q] Bluetooth Pairing to Car Audio

Has anybody else had trouble getting the Z3 to pair with your car's head unit? I have an Alpine CD player with bluetooth which paired fine with my Galaxy S4 but won't connect to the Z3. It fails because of an incorrect pin. However, the phone never prompts me to enter a pin. I've read that this is a known issue with Sony devices where they hard code the pin in as 0000 so if the device you're trying to pair with has it set to 1234 for example it will just fail. I've tried several suggestions such as trying to share a contact to the cd player via bluetooth to force the pairing as well as a couple of apps that try to pair with the device but they all seem to use the system's bluetooth pairing app.
Anybody else having this problem or know of a workaround/solution?
Thanks
Iam not sure if my situation is quiet the same but My bluetooth works fine when transferring pictures but recently tried to play music through bluetooth and although both devices paired up , They dont stay connected? It connects and then disconnects within a second or two!!
I found the solution to my issue in case it helps anybody else. With Alpine (perhaps others) you can only have 3 devices paired at once. My old phones were still stored so I had to clear them. So really it was just a case of terrible error messages. The head unit just said "Failed" when it didn't connect and the phone said incorrect password or pin so neither were helpful.

Categories

Resources