Hello, ive just upgraded to wm05 and my tomtom 6 worked perfectly before. now when i turn it on the back light goes off instantly. i have tried hex editing it from Backlight to Bbcklight but it comes up with an error when i try to open tomtom then. i have also tried downloading a pre patched one from this forum but still the same error.
Any help would be appreciated.
I have a xdaii
Thanks Andrew
Any help here at all please ive tried my hardest to get this working.
this is the error message i get when i open it with the patched file.
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
fixed it no worries now
andrew88 said:
fixed it no worries now
Click to expand...
Click to collapse
How did you get it working?
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Re: tomtom6 on xdaII
I have the same problem as you have. You said you hex edited tomtom navigator.exe. Which editor you are using and which location you are changing?
Help will be appriciated.
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
andreabix said:
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
Click to expand...
Click to collapse
Try this. I got it from one of the forums
Thanks a lot!!!
This fix worked fine for me.
pparmar said:
Try this. I got it from one of the forums
Click to expand...
Click to collapse
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
I have tried this and still no luck, the fix error message is still coming up, anyone any ideas?
im having the exact same problem
i have downloaded the file TomTom-Backlight-Fix.ZIP
i have copyed the file over to /program files/ navigator/
i am getting the error message
i have also downloaded and installed the fix-error-message.zip
i have extracted the .cab file to the root of the memory card and i have ran it.
it installed sucessfully.
but i am still getting the error message saying that the file is not signed or the components cannot be found.
could you please help me as i need tomtom 6 working as soon as possible
Same Problem
Guys, where does the file go? How do i use it?
Thanks.
Help with tomtom 6
I have a palm treo 650. I just downloaded tomtom 6 and U.S. maps online. I installed tomtom 6 on my phone. (im pretty sure I did it right). I have the navigator symbol and everytime I click it, it says, "tomtom sd card not found".
Well I put a bunch of crap on my sd card and tried it again. I clicked to open the navigator but this time, instead of it saying "tomtom sd card not found", the phone completely shut off on me, then restarted.
I dont know what i am doing.
can someone help me? thanks!
I don't know anything about palm treo 650, but I cleaned the SD card and transfered all tomtom6 files on my desktop computer using card reader. As soon as you insert SD card in to your palm itwill start installing. Try it it might work.
@Fudger: find out where Tomtom Navigator.exe is on your device and replace it by the one posted above.
@oakman: thanks for kicking this thread back up.
I already created another solution for myself, a mortscript that writes to backlight registry keys once Tomtom starts. It is less elegant, backlight flashes and Tomtom starts slower. So
@andrew88 Thanks a lot
Now @All:
I found several solutions on the web for Tomtom turning volume to 70% at start up, but I don't like any of them very much. Anyone who's been able to tweak Tomtom to set it to 100% default?
thanks
very
much
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
still struggling with backlight
Hi. I have TT6 v 6.01. I have an IPAQ 214, and whilst I used TT6 OK on my LOOX 720, I get the "no backlight" problem on the IPAQ. I have seen the suggestions here. Edit Backlight to Bbcklight first. On my TomTom Navigator.exe there is only one occurrence (UTF). I've edited that and saved. The version posted here seems to have only one occurrence too, but the addresses are different. Different release? Tried my edited version and got the error everyone else reports re certificate. So then I looked at the CAB file suggested to fix the error message. How should this be installed? I put it onto my SD card and found it using explorer on PDA. Double clicked and installed it to "device". No good. Then installed it to "File Store". No good. Then put it into Navigator folder and installed it. No good either. Anyone got any other ideas please?
I've got this same issue on an Ipaq 214 with Tomtom 6.
I can see the issue being described with editing the exe with a hex editor to reference the backlight function correctly, and like others I'm getting an issue with the cerfificate of the file.
TomTom6 does not have a cab called Cert_SPSC
How can I fix the certificate error with tomtom 6 ?
I've edited the TomTom Naviator.exe file correctly, and just need to fix the certificate error.
unicode editor
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
how can i get uni-code editor. is it available to download
uni code editor
How can I get uni code editor? I download hex editor but can not see the right code
Thanks,
Hello
I have been busy reading this forum and i has been a great help, I have been given 3 phones 2 o2 XDA IQ & a Vodafone V1240 2 of them need repairing new keyboard and casings on them which i found on ebay.
Back to the question is there anyway of changing the boot screens on the xda ia as when it boots it has the welcome to 02 and then a bubble screen could these be changed?? i am running the orignal wm5 but i did flashed it with wm6 rom the beta version but nothing has changed??
Cheers
Brogusblue
http://forum.xda-developers.com/showthread.php?t=318423
that thread should explain how to do it.
chribruu said:
http://forum.xda-developers.com/showthread.php?t=318423
that thread should explain how to do it.
Click to expand...
Click to collapse
here you go...
plug your phone in. run this program. then go to tools/immediate flash tools...and you should have a function called splash screen or something like that. point to the desired file. update... restart your phone and it should work. with this prog, you can also extract splash screen from a nbf file.
Hello
Thanks, I have plugged the phone in and ran program but i get "No file loaded, immediate flash not available (Client DLL not found)"
Cheers
Brogusblue
Choose, Test Immediate Flash, on your phone, TyphoonNBFtool.dll will prompt you to give it permission to run , allow it
Hello
I am completely confused, Downloaded the file to pc unzipped and ran program and get "No file loaded, immediate flash not available (Client DLL not found)" and that's how far i get the phone does prompt me. i have had a look on my phone and found the file "TyphoonNBFtool.dll"??
Cheers
Brogusblue
You need to extract the archive to a folder first, then click Test Immediate Flash, then TyphoonNBFtool.dll will prompt you to allow access
hi, iv got the htc touch diamond, and i cant rename, move, delete etc any of my files as i get the error message saying "Be certain that the file is not write-protectered and is currently not in use" anybody no how to make my files non-protected? Thanks
[/B]Hi,
I have downloaded and extracted the XDAndroid 2.1 .Then copied it to Storage card root.Clicked on Haret file leads me to a screen with "default.txt".Clilcking "Run" button throws the below exception: "Cannot open script file\Storage Card\default.txt.
Device: HTC Touch Pro 2 (Rhodium)
OS: WMO 6.5 Pro
Please assist.
Thanks!
I have the same problem. I believe the answer to be look at the folders that you copied over to your storage card. One of the folders is called "STARTUP CONFIG" I believe you go and pick out your phone and copy and paste the correct startup.txt in the root directory which Haret is located. I am doing it now and I got past that error, but still waiting for it to boot. It looks like it is getting stuck on an SD card error.
**********
So I picked the startup from the RALP folder and I was stuck at the XDAndroid boot screen, so I am going to try something else.
Did you find out what was the problem.
android 2.2 problem while booting
Hi,
i have a htc tilt and i wanted to boot android 2.2 i have download it on my storage card as shown and downloaded gen y dualboot for windows and android and extracted all the files and installed the file with 153 kb as shown in the video ofcouse on the storage card now when i open my storage card and go to haret and tab on it suprisingly its not booting its showing me an error message when i run it as cannot open script file\storage card\default.txt i request any member to explane me in detail so that i can run android 2.2 on my htc tilt plzzzzzzzzz help
thanxs
script file error
I am getting the same problem. Anyone know how to install this thing and get past this error. It is on my card but says cannot open script file/storagecard/android/default.txt
Move "andboot\AndroidApps\startup.backup.txt" to "andboot\Default.txt""
Move "andboot\AndroidApps\startup.backup.txt" to "andboot\Default.txt" should solve this issue.
i have a htc touch diamond and i tried to put the xdandroid the new one and i downloaded all the files needed then i put the files in a folder that i created (andboot) and all the required files there and i alos copied the diam500 from (start up conf) to the (andboot) folder next when i went to the ((haret)) file to execute the proses and i clicked it and then i have a weird window the says:
launch a script file.default path is the same where the executable lives.
and there is this box that have (( default.txt )) run
and then
start waiting for connection on port 9999
when you connect,you'll get a remote hardware examination tool.
listen for network connection (in a box)
(another box)
found machine generic msm7xxxa
that all in that window
and when i press (((run))) a small error window pops the says : cannot open script file /internal storage/andboot/default.txt
please help me if you can because i really want the to see the xdandroind and thanks any way so sorry for any trouble.
I'm having exactly the same problem. It runs fine on the first run but once I reboot the phone and run it again it just keeps asking for default.txt. I tried specifying startup.txt but it won't work either (it's a zero-length file anyway). This is happening with both the current builds.