When I have the phone docked and I'm listening to music over bluetooth (since the audio out doesn't work yet), when a call comes in the phone never rings it just answers the call. I'll be working and jamming out and then next thing I know I hear "hello?...hello?" I look at the phone and I'm in an active call that I can't communicate in. Anyone else notice this problem? Can someone with the OEM dock try to duplicate this for me?
Related
I searched and found this topic covered like 2 yrs ago but no one responded with an answer on that one so I'm going to try again.
I have a Verizon XV6800 (HTC Titan, Spring Mogul) and I'm working on connecting it to a PC that I will install into my car as a CarPC. Software is limited out there that work well with a PPC phone and is easily integrated into the front end im using on the PC. Bc of this I made a skin for the frontend that controls the phone using MyMobiler and I want the audio to come over the BT. I set it up using a Belkin BT Dongle and configured the Voice Gateway feature. It works good if I want to make a call, but when I receive a call it auto answers almost immediately. (less than 1 ring) I checked all the setting and auto answer is turned off all that.
The issue seems to me is that the PC and Phone don't make a connection until a call is started. So when I get an incoming call it then connects and I guess assumes im putting on a BT headset therefore I want to answer the phone... I need it to not auto answer... If i have the music on in the car i dont even hear it ring and before i know it someone is listening in on me in the car on the other end of the phone and i dont even realize it....
Any ideas on how to make it not auto answer? Maybe something in the registry? Or how to make it stay connected to the computer when im in range like it would if I had my headset on?
Thanks for any help!
Hey,
there is an app which can autoanswer / pickup calls...found it here:
com.patzapps.autoanswereasy
PHONECALLAUTOANSWER
market.android.com/details?id=com.patzapps.autoanswereasy
TRY IT
Greetz
TRY IT
Greetz
my problem is demaged usb slot or headphones becouse with slightest move phone starts to dial last number on the list
think how annoying it can be
any ideas how to turn this thing off ?
bump
nobody knows how to turn off the headphone-set dialing ?
Maybe this is impossible.. I've been having this problem for a long time and couldn't find any solution. Right now I just turn on the plane mode any time I walk with Raphael in my pocket. Otherwise I can make like 20 unwanted calls in 5 minutes. Unfortunatelly music still gets interrupted, by the dialer attempts.
Oh.. I use an USB-minijack adapter, but the same problem is with the original headset.
How do I transfer a call from bluetooth speakers to the phone with tasker? Cant find any parameter for tat action :/
Why: When in car I want the calls to go through bluetooth handsfree system, but if its a private call and I have company in the car I would like to be able to pick my phone up from the dock and then the call should be transfered to the phone automaticlt even thou the bluetooth still is connected.
How do I do this?
Thanks in advance
/Max
The way I would do it is have a script to turn off bluetooth when there is an incoming call and it is removed from the dock (by the way what do you mean by dock?) and then re-enabling it when the call ends.
Good thought, but its like walking around the problem. Ill try if my car likes me to switch on and off BT or if it will refuse to reconnect.
Dont need a script for it, tasker have defaults to just turn of the BT in this case. But it would be a hell lot easier if I could just re route the sound since there are buttons for it on the darn phone
A dock... the holder with included charger for my mobile in the car.
Regards
/Max
On htc phones if you answer from the bluetooth the call will take place there but if you will answer from the ohone the call will be directed on the phonespeaker
I also have this problem but in opposite way. I want that when my phone has the autoanswer enabled the call to remain on the bluetooth which is not happenning and when i am riding the motorcycle is difficult to answer from the bluetooth device
lhoria said:
On htc phones if you answer from the bluetooth the call will take place there but if you will answer from the ohone the call will be directed on the phonespeaker
I also have this problem but in opposite way. I want that when my phone has the autoanswer enabled the call to remain on the bluetooth which is not happenning and when i am riding the motorcycle is difficult to answer from the bluetooth device
Click to expand...
Click to collapse
I havnt tried, but this app looks promising for you: https://market.android.com/details?id=com.everysoft.autoanswer
//Max
Thank you, I tried this but is not working as I wish, because when is answering the conversation is transferred automatically on the phone!
Anyone have this problem or have an answer for me.
My Sensation connects automatically to my car handsfree system (Honda Accord) and mostly works fine.
The problem occurs when it disconnects and I`m away from the car. Whenever I make a call the loudspeaker turns on and I have to manually turn it off before taking or making the call.
Also, when somebody rings me the phone doesn`t ring, it just makes a quiet beep so I miss a lot of calls. the only way I can stop it is to restart the phone, I can`t find any settings to solve it.
Don`t know if its related but I have Carhome ultra and Vlingo installed but the problem occurs whether or not I run these programs, I only have to connect to the cars bluetooth system.
Nobody else have this problem? Or able to offer any clues as to why it might be happening
I swear there was a thread for this before. My apologies if so, I DID search for it.
Anyway, I used to be able to answer calls on my watch from my phone. Now I only get the option to decline the call. Did anyone find a fix for this? I don't use it much, but I needed it today. It would be nice if all of the functions of this watch worked...
If you are connected BT and a call comes in, you will only be able to answer it of you have phone calls enabled in the BT setting for the watch. Doing so will not let you take calls on a BT headset though as the watch acts as the headset.
dbregman said:
If you are connected BT and a call comes in, you will only be able to answer it of you have phone calls enabled in the BT setting for the watch. Doing so will not let you take calls on a BT headset though as the watch acts as the headset.
Click to expand...
Click to collapse
Is this new since Tizen 3? I used to be able to take calls on the watch without setting anything up differently (just pair it and done), and my phone would decide the preferred device. Meaning, if I was in my car, my car would ring and I could answer on it. If this is the case now, that's kind of a big step backwards!