my problem is demaged usb slot or headphones becouse with slightest move phone starts to dial last number on the list
think how annoying it can be
any ideas how to turn this thing off ?
bump
nobody knows how to turn off the headphone-set dialing ?
Maybe this is impossible.. I've been having this problem for a long time and couldn't find any solution. Right now I just turn on the plane mode any time I walk with Raphael in my pocket. Otherwise I can make like 20 unwanted calls in 5 minutes. Unfortunatelly music still gets interrupted, by the dialer attempts.
Oh.. I use an USB-minijack adapter, but the same problem is with the original headset.
Related
I have an XDA II with a Logitech Mobile Bluetooth Headset for the last 7 months.
I've just returned one of these headsets as faulty because I kept losing 85% volume in the ear pierce ocassionally when I received an incomming call. I then bought another one and guess what? same problem, so the fault has to be with the XDA phone itself. The problem is I only seem to get this problem with incoming calls, can't remember getting this problem when making a call. When the volume drops I can just about hear the caller but its extremely faint.
The only other Bluetooth device I use is my TomTom navigation unit and although I have had some problems with both devices working together I'm not getting regular problems, just things like the TomTom can't alway connect to the sat box or my headset doesn't always work when the phone rings.
Anyone else had this problem and more importantly the solution???
Thanks
Paul.
I had that problem and I was advised to turn off device, remove battery for 20 secs or so (ensure backup fully charged!!!) and then reinstall battery, reset device (soft) then finally re-install headset ans establish new BT pairing to headset.
fiddly but it did work
good luck
Pete
I did that as advised by Logitech but the problem still occurrs on occassions. Is it a problem with headset or XDA?
I have the Kenwood DNX8120 and it works fine with my Fuze (did have disconnect issues but just updated the Kenwood firmware which should take care of that) but the SMS feature on the radio doesn't work. I know only certain phones are compatible with this feature but on the Kenwood compatibility list there are several HTC devices that work. In any case, does anyone know how to enable SMS over bluetooth on the Fuze?
Thanks
I have the Kenwood DNX8120 in my car and have had no luck getting the Fuze to work correctly. It constantly drops connection. I updated the Bluetooth firmware and that only seemed to make matters worse. It will pair with the Kenwood, but either won't make a phone call or will take up to 60 seconds (or not at all) for the Fuze to recognize I it the call button on the radio. SMS, sent and received call history also do not work.
Have you had similar issues?
I can not get sms working. The only other issue I have is that after a call, it drops the connection. If I get another incoming call, it will reconnect and the radio will ring and handle the call. But, if I want to place a call, I have to either select "set as hands free" of something similar, in the bluetooth settings on teh phone and it reconnects and I can dial. I just upgraded to elite rc3 and the problem is still there. I havn't messed with it enough yet to know if it dials ok without having to bring the phone out of standby yet. I too have updated the bluetooth drivers from Kenwood and that didn't help. I also tried the jetware handfree extension and didn't see any improvement.
I called HTC about this, and they told me it only "officially" supports a hand full of car units. Mostly in the Audi and BMW. They don't "officially" support anything from Kenwood so they were absolutely no help on this. I've also noticed this phone drops all connections except cell and data when it sleeps. Wifi, GPS and Bluetooh all seem to go to sleep with the phone. This seems to make bluetooth pretty useless if the connection drops every time the phone sleeps and needs to be manually reconnected.
I haven't seen it drop the bluetooth connection during sleep. I see that the Kenwood supports some HTC devices but not this one specifically. The other wierd thing is that the first time it pairs it shows the battery indicator but after the next connect it doesn't show it. It shows the battery icon but shows it empty. The jetware extension however does fix that. I will play some more with it and report here.
After resetting my phone to AT&T's original setup, I am experiencing the exact same functionality as you. It now sync's my call history and phone book. No voice dial support or SMS yet. (These have never worked with any of my phones) It will disconnect after a couple phone calls and I have to set as hands free to reconnect. Also, mine still looses the connection to the unit when it goes to sleep. I'm keeping it on a car charger for now and turning off any sleep function when charging. That at least keeps it connected until I make a call. It's almost still not worth using with having to reconnect hands free. Maybe if a hands free quick connect shortcut could be created?
This is all really ridiculous that a phone with this kind of tech can't auto pair and be ready for a call. My LG Chocolate had absolutely no problems with the Kenwood. As soon as the Kenwood finished booting the LG would auto connect and be ready for a call.
I thought I found a workaround at
http://forum.xda-developers.com/sho...ghlight=bluetooth+connection+drops+phone+call
But, once installed an trying to run BT Restart I get an error saying that I need .net compact framework (version 1 or 2) installed. Not sure what to do now, cant seem to find a cab for this.
I've used this package from another post on the forum. It has many useful apps including the latest version of .net compact framework.
http://www.tyguy.net/_xchg/PPC/@essentials.rar
Let me know how it turns out!
I will take a look but I have 3.5 already installed. I guess that app needs the older version. Not sure I want to mess with downgrading it.
Not Kenwood
Hey Guys,
I drive a Jag XK8 and it has the same issues you are mentioning with your Kenwood, but its an Alpine unit, it drops calls, and after the first call connects the second call rings on the stereo but you can only answer on the handset.
I also recently had a new Jag XF for a week. It had a full integration to the phone. It also only showed the battery status when the phone first connected then the battery showed empty. It would drop bluetooth connections constantly on some days (every 90secs) and then somedays it would keep the bluetooth connected without issue. Very unreliable.
The reason I bring this up, is just to let you know these issues are not limited to the Kenwood.
Dave
Just an FYI. I have found it easier to just go into setup in the Kenwood and reconnect the bluetooth from there when the phone disconnects. It's under Setup/Bluetooth/Set, then just click on the device and hit connect. It seems easier than fiddling with the phone while your driving.
How do I transfer a call from bluetooth speakers to the phone with tasker? Cant find any parameter for tat action :/
Why: When in car I want the calls to go through bluetooth handsfree system, but if its a private call and I have company in the car I would like to be able to pick my phone up from the dock and then the call should be transfered to the phone automaticlt even thou the bluetooth still is connected.
How do I do this?
Thanks in advance
/Max
The way I would do it is have a script to turn off bluetooth when there is an incoming call and it is removed from the dock (by the way what do you mean by dock?) and then re-enabling it when the call ends.
Good thought, but its like walking around the problem. Ill try if my car likes me to switch on and off BT or if it will refuse to reconnect.
Dont need a script for it, tasker have defaults to just turn of the BT in this case. But it would be a hell lot easier if I could just re route the sound since there are buttons for it on the darn phone
A dock... the holder with included charger for my mobile in the car.
Regards
/Max
On htc phones if you answer from the bluetooth the call will take place there but if you will answer from the ohone the call will be directed on the phonespeaker
I also have this problem but in opposite way. I want that when my phone has the autoanswer enabled the call to remain on the bluetooth which is not happenning and when i am riding the motorcycle is difficult to answer from the bluetooth device
lhoria said:
On htc phones if you answer from the bluetooth the call will take place there but if you will answer from the ohone the call will be directed on the phonespeaker
I also have this problem but in opposite way. I want that when my phone has the autoanswer enabled the call to remain on the bluetooth which is not happenning and when i am riding the motorcycle is difficult to answer from the bluetooth device
Click to expand...
Click to collapse
I havnt tried, but this app looks promising for you: https://market.android.com/details?id=com.everysoft.autoanswer
//Max
Thank you, I tried this but is not working as I wish, because when is answering the conversation is transferred automatically on the phone!
Recently i've noticed that when i go to make a call , after i press CALL it switches on the speakerphone. Also when i recieve a call the speakerphone is automatically activated, which usually deafens me at the same time haha.
Is there an option to turn off this feature? Or is it a bug?
I'm on stock 2.3.4, i'm pretty sure this problem didn't happen before the update.
I apologise if this issue has already been raised, i did do a search but found nothing.
Thanks
This also happens to me. It seems to be after I`ve undocked my phone from the car and its Brodit cradle. When in the car I run Car Home Ultra and Vlingo but when out of the car I can`t find any settings to alter to stop this happening.
Not been in the car this morning and phone works fine. I`m still on 2.3.3 stock T Mobile
Change on setting??
Anyone have this problem or have an answer for me.
My Sensation connects automatically to my car handsfree system (Honda Accord) and mostly works fine.
The problem occurs when it disconnects and I`m away from the car. Whenever I make a call the loudspeaker turns on and I have to manually turn it off before taking or making the call.
Also, when somebody rings me the phone doesn`t ring, it just makes a quiet beep so I miss a lot of calls. the only way I can stop it is to restart the phone, I can`t find any settings to solve it.
Don`t know if its related but I have Carhome ultra and Vlingo installed but the problem occurs whether or not I run these programs, I only have to connect to the cars bluetooth system.
Nobody else have this problem? Or able to offer any clues as to why it might be happening