Database Info

WM6 proxy setting, quick help.

Hello.
I'm using faria's latest WM6 ROM, but can't find where to enter proxy server / proxy settings in accordance to t-mobile's guide. WM6 doesnt have the place where to enter proxy numbers as specified. After a little digging i heard you might need to change the settings in the registry for wm6.
Can anyone please advise?
Thanks!
12. Tap Edit my proxy server under T-Mobile GPRS.
13. Tap to check This network connects to the Internet.
14. Tap to check This network uses a proxy server to connect to the Internet.
15. Enter 216.155.165.050 in the Proxy server field.
16. Tap Advanced.
17. Tap HTTP.
18. Enter 8080 in the Port field.
Click to expand...
Click to collapse

I was able to configure mine just fine today, but I'll admit it took me a few tries in the past before I figured it out.
Go to Start --> Settings --> Connections tab --> Connections.
Since you're not using the standard T-Mobile ROM, just adapt the steps a bit to match up with what is on the WM6 ROM. Where it says T-Mobile GRPS in the instructions, actually use the My Work Network section on the device. You can also rename My Work Section to T-Mobile GRPS if you want.
Under that section, you should see:
Add a new modem connection
Add a new VPN server connection
Edit my proxy server
Other than the My Work Network/T-Mobile GPRS thing, the steps were exactly the same.
Oh yeah, instead of 216.165.155.050 enter 216.165.155.50.
I did that and I was able to get an Edge connection and send/receive MMS messages from my Verizon phone.
Dave

sgtcasey said:
You can also rename My Work Section to T-Mobile GRPS if you want.
Under that section, you should see:
Add a new modem connection
Click to expand...
Click to collapse
Hi.
When I goto Settings > Connection; "My Work" is no longer listed as a connection, only My Home.
How can i get back / add "My Work" ?
THanks.

Hmmm... I'm not sure. I have My ISP and My Work Network and I've always had that with the WM6 ROM's.
Dave

I know this is kind of buggy... I had the same issue.
If you add a new connection, call it My Work or something, and choose GPRS 3G for the type, and finish, it will put 2 connections, which will allow you to change between My Work Network again, etc. No registry hack needed, it's there, it's just not showing. By adding a 2nd connection, it will show your "My Work Network" again. Keep in mind, if you had MMS messaging, but no 'net until now, once the 'net works, you will have to change your MMS setting to "My Work Network" as well.
Now 'net and MMS works on my phone (Cingular 8525) on Tmobile, using only T-Zones and WM6 Thx for the help!

Having problem connecting to internet, as of 7/18/07?

Hey guys, I have T-mo, and i use the 5.99 T-zone plan.
and since 7/18 I can't seem to connect to the internet anymore.
it says error 502 - Bad request.
does anyone know what's up?
thanks

so i'm the only one with this problem?
can someone tell me what could be wrong?

Are you using the proxy fix?

no.
It used to work without it.

Somewhere I read that there were still areas of the US that were still working with out it. I didn't figure it was true, but apparently it is if yours was working without it until now.
What you need to do is set up a new T-Mobile connection. If you use your internet over activesync for any reason you will need to have 2 different connections, 1 without the proxy (use this one over activesync) and 1 with the proxy (use this one over GPRS). Since you already have the one without the proxy, I would just leave that one as it is. To set up the one with the proxy, go to start-->settings-->connections tab-->connections and add a new modem connection. From there, on the first page that comes up change the My connections field to T-Mobile Data and change the select a modem field to cellular line (gprs) then click next. Now, in the access point name field put in wap.voicestream.com, click next and then finish. Now that you should be back to the connections main page, click manage existing connections under the new connection that you just made and then click the general tab and name it T-Mobile Proxy so you know which connection is which from now on. After that, click on the proxy settings tab and check the this network connects to the internet box and check this network uses a proxy.... In the proxy server field put in 216.155.165.50 and then click advanced. Tap the HTTP field and on the next page that comes up change the port to 8080. Click ok until you're back at the settings page again and then click the advanced tab. Click the Select Network button and change the top drop down menu to your new T-Mobile Proxy connection (actually, I usually change both drop down menu's in there to the T-M Proxy connection, but I don't use a VPN so it doesn't really matter). Click ok until your back to your today screen and you should be good to go from there.
Hope this helps. Sorry if you already knew how to add the proxy and everything but I figured even if you already knew how to do it there would probably be others out there that this would help that didn't know how.

Thanks, but after using the Proxy, I can finally get my emails.
but i can't use agile anymore. sigh..

I've never used agile, but if it gives you the option in the setting to choose what port you use, just change it to 8080. From what I've read, some messaging apps allow you to do that.

According to agiles faq page, that apparently isn't the case. It says that you can only use certain ports and 8080 isn't one of them.

so from now on, only 8080 port works?

I'm not sure what all port are closed as of recently. 8080 is open for sure though so I figured that would be the best place to start. If you go to the agile faq page it lists the ports that can be used for the various messengers and try changing the ports used and see what happens. From what I read on that page it does look like you have the option to change the ports, but it didn't say how to do it.

Frustrated!! Pocket Internet Explorer doesn't work when cradled

I have a Cingular 8525 with WM5, using the lastest version of Activesync. I do not have wifi or 3g internet connection on my cell phone. Everything is synced and seems to be working fine but PIE doesn't work.
My Network management settings are:
Programs that automatically connect to the Internet should connect using: "My ISP"
Programs that automatically connect to a private network should connect using: "My ISP"
Under Connections it reads: My ISP, and for select a modem it says "Cellular Line"
How do I enable my phone to use pocket internet explorer when cradled? The reason is that my RSS reader cannot update because IE cannot connect.
Save me! I spent the last 4 hours trying to fix this problem.

Hi,
I had the same problem some time ago.
In ActiveSync\File\Connections I had to tick "This computer is connected to: The internet". Now it works.

xunkn0vvnx said:
I have a Cingular 8525 with WM5, using the lastest version of Activesync. I do not have wifi or 3g internet connection on my cell phone. Everything is synced and seems to be working fine but PIE doesn't work.
My Network management settings are:
Programs that automatically connect to the Internet should connect using: "My ISP"
Programs that automatically connect to a private network should connect using: "My ISP"
Under Connections it reads: My ISP, and for select a modem it says "Cellular Line"
How do I enable my phone to use pocket internet explorer when cradled? The reason is that my RSS reader cannot update because IE cannot connect.
Save me! I spent the last 4 hours trying to fix this problem.
Click to expand...
Click to collapse
Change "cellular line" to "cellular line GPRS" from the scroll down box.

The saga still continues to no avail...
i clicked "This computer is connected to the internet"
and also selected "Cellular line GPRS"
What do I enter for Access point name, username, password, etc.
This is getting really annoying.

xunkn0vvnx said:
The saga still continues to no avail...
i clicked "This computer is connected to the internet"
and also selected "Cellular line GPRS"
What do I enter for Access point name, username, password, etc.
This is getting really annoying.
Click to expand...
Click to collapse
Follow the screen shots in order 1-4. access point: wap.cingular(lower case) User: [email protected](all caps) Password: CINGULAR1 (all caps)
8125
2.25.11.1

Still nothing, when I right click and try to connect it says
"Cannot Connect
The current connection cannot be used for your request. Please end the current connection and try again."

xunkn0vvnx said:
Still nothing, when I right click and try to connect it says
"Cannot Connect
The current connection cannot be used for your request. Please end the current connection and try again."
Click to expand...
Click to collapse
Is AT&T your carrier? When did all this begin happening? The settings I've given you are to be made directly on your device, and not from a PC. Try "auto pick" instead of ISP GPRS, and see if that helps.

hotdog53 said:
Is AT&T your carrier? When did all this begin happening? The settings I've given you are to be made directly on your device, and not from a PC. Try "auto pick" instead of ISP GPRS, and see if that helps.
Click to expand...
Click to collapse
One more thing to try: go to your connections settings, tap on advanced (at bottom) select MediaNet from scroll box, tap "proxy" the box that says it uses a proxy to connect should be unchecked (empty) The top box should be checked. You haven't done any internet connection tweaks in the registry have you?

0 internet registry tweaks, do you think you could link me to the cab that should be able to fix this for me?
Either way, and despite whether or not this gets fixed, thank you, thank you, for helping me.

xunkn0vvnx said:
0 internet registry tweaks, do you think you could link me to the cab that should be able to fix this for me?
Either way, and despite whether or not this gets fixed, thank you, thank you, for helping me.
Click to expand...
Click to collapse
Sorry man, I don't have the cabs for this fix. I remember reading about someone having the same problems and a cab fix was requested. Can't remember where I read about it. I recommend a forum or google search for the cab fix...I'm pretty sure you'll find what you need.

Ok here is the weird thing... I am running SPB mobile, and when I sync my weather is able to update for New York, NY. Doesn't that mean it must be getting an internet connection through PIE? DOes SPB mobile mess with the registry?

Anybody? Lately I've been using WiFi to update my phone but Id rather have it work when it is cradled.

Windows Phone 7 Proxy Setup

I was wondering how do I setup a proxy on my wifi network for my windows phone 7 =, i have a pricate proxy server which I would like to use as i unlimted bandwith on it. Could you please help me. I have the ip address and port to access it however I have no idea how to use it.
Thanks

I'm sure if you did a quick search you could find the answer yourself, but...
Settings > Wifi > On > tap the Wifi network you want to connect to
1. Proxy toggle On
2. Enter the address in the server/url box
3. Enter the port in the Port box.
Casey

ahh you little beatay. You saved my day. I did google people of microsft anwserssaid they had no idea.

[Q] Using internet via proxy server and joining domain

Hi
I had wifi in my office where we could use net without any problem, now proxy server has been set up. I know all the settings but cant figure out how to enter IP Address in my HD7 (Mango) manually to start browsing.
e.g. the proxy server IP is: 192.168.0.1
Now I need to give an IP to the phone myself, say: 192.168.0.69
But the phone is automatically giving itself IP: 192.168.1.xx
This is very annoying as I am unable to sync my mail in the office.
Any help will be highly appreciated

You can edit the WiFi network settings for the particular network, by tapping and holding on it.

Techno-Freak said:
You can edit the WiFi network settings for the particular network, by tapping and holding on it.
Click to expand...
Click to collapse
Only the server etc. can be edited when proxy is turned on, there is no way to edit my HD7's own IP address