Hey guys, I have T-mo, and i use the 5.99 T-zone plan.
and since 7/18 I can't seem to connect to the internet anymore.
it says error 502 - Bad request.
does anyone know what's up?
thanks
so i'm the only one with this problem?
can someone tell me what could be wrong?
Are you using the proxy fix?
no.
It used to work without it.
Somewhere I read that there were still areas of the US that were still working with out it. I didn't figure it was true, but apparently it is if yours was working without it until now.
What you need to do is set up a new T-Mobile connection. If you use your internet over activesync for any reason you will need to have 2 different connections, 1 without the proxy (use this one over activesync) and 1 with the proxy (use this one over GPRS). Since you already have the one without the proxy, I would just leave that one as it is. To set up the one with the proxy, go to start-->settings-->connections tab-->connections and add a new modem connection. From there, on the first page that comes up change the My connections field to T-Mobile Data and change the select a modem field to cellular line (gprs) then click next. Now, in the access point name field put in wap.voicestream.com, click next and then finish. Now that you should be back to the connections main page, click manage existing connections under the new connection that you just made and then click the general tab and name it T-Mobile Proxy so you know which connection is which from now on. After that, click on the proxy settings tab and check the this network connects to the internet box and check this network uses a proxy.... In the proxy server field put in 216.155.165.50 and then click advanced. Tap the HTTP field and on the next page that comes up change the port to 8080. Click ok until you're back at the settings page again and then click the advanced tab. Click the Select Network button and change the top drop down menu to your new T-Mobile Proxy connection (actually, I usually change both drop down menu's in there to the T-M Proxy connection, but I don't use a VPN so it doesn't really matter). Click ok until your back to your today screen and you should be good to go from there.
Hope this helps. Sorry if you already knew how to add the proxy and everything but I figured even if you already knew how to do it there would probably be others out there that this would help that didn't know how.
Thanks, but after using the Proxy, I can finally get my emails.
but i can't use agile anymore. sigh..
I've never used agile, but if it gives you the option in the setting to choose what port you use, just change it to 8080. From what I've read, some messaging apps allow you to do that.
According to agiles faq page, that apparently isn't the case. It says that you can only use certain ports and 8080 isn't one of them.
so from now on, only 8080 port works?
I'm not sure what all port are closed as of recently. 8080 is open for sure though so I figured that would be the best place to start. If you go to the agile faq page it lists the ports that can be used for the various messengers and try changing the ports used and see what happens. From what I read on that page it does look like you have the option to change the ports, but it didn't say how to do it.
Related
Hello.
I'm using faria's latest WM6 ROM, but can't find where to enter proxy server / proxy settings in accordance to t-mobile's guide. WM6 doesnt have the place where to enter proxy numbers as specified. After a little digging i heard you might need to change the settings in the registry for wm6.
Can anyone please advise?
Thanks!
12. Tap Edit my proxy server under T-Mobile GPRS.
13. Tap to check This network connects to the Internet.
14. Tap to check This network uses a proxy server to connect to the Internet.
15. Enter 216.155.165.050 in the Proxy server field.
16. Tap Advanced.
17. Tap HTTP.
18. Enter 8080 in the Port field.
Click to expand...
Click to collapse
I was able to configure mine just fine today, but I'll admit it took me a few tries in the past before I figured it out.
Go to Start --> Settings --> Connections tab --> Connections.
Since you're not using the standard T-Mobile ROM, just adapt the steps a bit to match up with what is on the WM6 ROM. Where it says T-Mobile GRPS in the instructions, actually use the My Work Network section on the device. You can also rename My Work Section to T-Mobile GRPS if you want.
Under that section, you should see:
Add a new modem connection
Add a new VPN server connection
Edit my proxy server
Other than the My Work Network/T-Mobile GPRS thing, the steps were exactly the same.
Oh yeah, instead of 216.165.155.050 enter 216.165.155.50.
I did that and I was able to get an Edge connection and send/receive MMS messages from my Verizon phone.
Dave
sgtcasey said:
You can also rename My Work Section to T-Mobile GRPS if you want.
Under that section, you should see:
Add a new modem connection
Click to expand...
Click to collapse
Hi.
When I goto Settings > Connection; "My Work" is no longer listed as a connection, only My Home.
How can i get back / add "My Work" ?
THanks.
Hmmm... I'm not sure. I have My ISP and My Work Network and I've always had that with the WM6 ROM's.
Dave
I know this is kind of buggy... I had the same issue.
If you add a new connection, call it My Work or something, and choose GPRS 3G for the type, and finish, it will put 2 connections, which will allow you to change between My Work Network again, etc. No registry hack needed, it's there, it's just not showing. By adding a 2nd connection, it will show your "My Work Network" again. Keep in mind, if you had MMS messaging, but no 'net until now, once the 'net works, you will have to change your MMS setting to "My Work Network" as well.
Now 'net and MMS works on my phone (Cingular 8525) on Tmobile, using only T-Zones and WM6 Thx for the help!
I'll probably catch some hell for this, but here goes...
Part of the reason I looked into all this upgrading to Windows Mobile 6 was because I added the T-zones feature to my account. I know its lame compared to full internet access, but all I really wanted was e-mail and the few things T-zones offered (movie times, weather, news, etc). So for $5.99 a month instead of $29.99 a month, it seemed like a bargain. Anyway, I called T-mobile and spoke with someone who told me that with the MDA under WM5, only e-mail worked and not all the other stuff. She recommended (but said I did not hear it from her) to hack my phone up to WM6 to get the full functionality of T-zones.
Anyway, I've done that and succeeded (yes...a newbie success story) and I went with the XDA6 ROM because it had the other things I like such as Mobile Office 2007. So far, outside of some excessive battery drain, the thing works great. However, I still have no T-zones functionality (though e-mail and MMS works fine). So what I'm thinking (correct me if I'm wrong) I need to install the T-zones application. If this is the case, does anyone have a cab file for this which will work? I don't know if there is a difference between WM5 and WM6 but I'm assuming there is, otherwise I would not have needed to upgrade to get this feature.
Any help or guidance would be appreciated!
i can browse the internet on PIE with the 5.99 plan. all you have to do is input the proxy settings and everything should work
216.155.165.50:8080
Where do you set the proxy settings? I've never seen an option for this before and can't seem to find it now.
T-Mobile Web and Tzone
pr0naLd said:
i can browse the internet on PIE with the 5.99 plan. all you have to do is input the proxy settings and everything should work
216.155.165.50:8080
Click to expand...
Click to collapse
I have tried it with my TZone (5.99) connection all I can do is email that to windows live does not work, web browsing with or without proxy does not work at all.My guess is that it may be based on the area( location ) I am.
some places it might work.unless someone tells me that I missed something.
install the cab i attached
1. then go to settings, connections, connections
2. then it should say tmobile data, then select "mange existing connections"
3. edit, and keep pressing next until you are finished
4. click on proxy settings (tab right next to modem on bottom of screen), select this newtork connects to internet, and this network uses proxy server.
5. enter 216.155.165.50, click advanced
6. click on http and put 8080 instead of 80 in the port
7. exit back to task in connections (part that says tmobile data and my work network
8. follow steps 4-6 for "my work network"
9. go to advanced in the connections settings and click on select networks and make sure tmobile data is the first option
10. use PIE and surf, have fun
this has worked for me numerous times i've flashed a different rom
If you are looking for tmobile email thing i think this is it.
No to be a pain in the ***, but pr0naLd can you verify that you instructions are right, because i am unable to complete your steps on my Wizard running 06, some of the steps are different
steps
these are the steps that I saved from howard forums a while back. worked for me when I upgraded. Not sure who posted them on there though.
1. Open up your keyboard and get out your stylus because it will make it easier
2. Start menu --> Settings
3. Go to 'Connections' tab
4. Then click on Connections app
5. Select 'Set up my proxy server'
6. Select the 'General' tab
7. On the general tab, name it "WAP" (or anything, really, that's just what I used) -- if you haven't messed with this before, it will say "My Work Network"
8. Select the 'Modem' tab
9. Click on New...
10. Name the connection "Tzones" (again, that's what I used)
11. Under modem, select 'Cellular Line (GPRS)'
12. Click Next
13. Under access point name, type "wap.voicestream.com"
14. Click Next
15. Leave "User name", "Password", and "Domain" blank (not a space, but blank)
16. Click on Advanced...
17. On the 'TCP/IP' tab, ensure "Use server-assigned IP address" is checked and that nothing else is checked or filled-in
18. On the 'Servers' tab, ensure "Use server-assigned addresses" is checked and that nothing else is checked or filled-in
19. Click "ok" in the top right corner (or press the OK button next to your space bar)
20. Click Finish
21. Select the 'VPN' tab and make sure there is nothing here
22. Select the 'Proxy Settings' tab
23. Check the box "This network connects to the Internet"
24. Then you can check the box that says "This network uses a proxy server to connect to the Internet"
25. Then type into the Proxy server box: 216.155.165.50:8080
26. Click on Advanced...
27. Click on "HTTP"
28. The server should read 216.155.165.50
29. Change the port number to 8080
30. Leave "User name", "Password", and "Domain" blank (not a space, but blank)
31. Click "ok" in the top right corner (or press the OK button next to your space bar)
32. And do the "ok" thing again
33. And "ok" one more time
34. Notice 1: at the top of the screen, it should say "WAP" (or whatever name you chose in step 7)
35. Notice 2: where before it said 'Set up my proxy server' now it should read 'Edit my proxy server' -- just FYI, don't touch
36. Click on the 'Advanced' tab
37. Click on "Select Networks"
38. Under both drop-down boxes, choose "WAP" (or the name you chose in step 7) -- I'm not sure the 2nd one needs to be the same, but what the heck, it worked for me; feel free to experiment
39. Click "ok" in the top right corner (or press the OK button next to your space bar)
40. And do the "ok" thing again
41. Push the "e" on your MDA to launch Internet Explorer
42. Make sure you're not connected via the USB cable
43. Go to "Favorites" and choose one of the sites listed there and see if it works
44. If it works, congratulations! Stop here.
45. If it doesn't work, go back to step 1 or ask for help (but I'm no expert, so I think I'll leave it to others to help you)
BIGstiffness55 said:
No to be a pain in the ***, but pr0naLd can you verify that you instructions are right, because i am unable to complete your steps on my Wizard running 06, some of the steps are different
Click to expand...
Click to collapse
there i fixed step 2, that should get you good to go
pr0naLd said:
install the cab i attached
10. use PIE and surf, have fun
this has worked for me numerous times i've flashed a different rom
Click to expand...
Click to collapse
pr0naLd, will this interfere with regular web surfing when attached to a WiFi network, or does this not make a difference?
Oh, and HOLY CRAP! That is AWESOME. Now my exchange server push client works, I can access any website/e-mail...all for the low price of $5.99.
I sorta want to have your baby. Thanks man!!!
ExploreMN said:
pr0naLd, will this interfere with regular web surfing when attached to a WiFi network, or does this not make a difference?
Oh, and HOLY CRAP! That is AWESOME. Now my exchange server push client works, I can access any website/e-mail...all for the low price of $5.99.
I sorta want to have your baby. Thanks man!!!
Click to expand...
Click to collapse
when you want to use wifi, you have go to advanced in the connections settings and select "my isp"(or make a blank connection with no options) for it to use the WIFI connection, it's a pain, but using 5.99 plan it's worth it
T-zones cab
ExploreMN said:
I'll probably catch some hell for this, but here goes...
Part of the reason I looked into all this upgrading to Windows Mobile 6 was because I added the T-zones feature to my account. I know its lame compared to full internet access, but all I really wanted was e-mail and the few things T-zones offered (movie times, weather, news, etc). So for $5.99 a month instead of $29.99 a month, it seemed like a bargain. Anyway, I called T-mobile and spoke with someone who told me that with the MDA under WM5, only e-mail worked and not all the other stuff. She recommended (but said I did not hear it from her) to hack my phone up to WM6 to get the full functionality of T-zones.
Anyway, I've done that and succeeded (yes...a newbie success story) and I went with the XDA6 ROM because it had the other things I like such as Mobile Office 2007. So far, outside of some excessive battery drain, the thing works great. However, I still have no T-zones functionality (though e-mail and MMS works fine). So what I'm thinking (correct me if I'm wrong) I need to install the T-zones application. If this is the case, does anyone have a cab file for this which will work? I don't know if there is a difference between WM5 and WM6 but I'm assuming there is, otherwise I would not have needed to upgrade to get this feature.
Any help or guidance would be appreciated!
Click to expand...
Click to collapse
Lets make it more easy
load this cab on your device and it will add t-zones icon under program and you are ready to use t-zones.
Its just t-zones wap browser ...not settings.
It Works
pr0naLd said:
install the cab i attached
1. then go to settings, connections, connections
2. then it should say tmobile data, then select "mange existing connections"
3. edit, and keep pressing next until you are finished
4. click on proxy settings (tab right next to modem on bottom of screen), select this newtork connects to internet, and this network uses proxy server.
5. enter 216.155.165.50, click advanced
6. click on http and put 8080 instead of 80 in the port
7. exit back to task in connections (part that says tmobile data and my work network
8. follow steps 4-6 for "my work network"
9. go to advanced in the connections settings and click on select networks and make sure tmobile data is the first option
10. use PIE and surf, have fun
this has worked for me numerous times i've flashed a different rom
Click to expand...
Click to collapse
Thank you and also itsbuckyb
Your trick worked, but I would like to mention for the benifit of others. I think it was the cab because I tried that setting with proxy before but did not worked.
Also I am still have issues with my windows live couldn't get that working.
I am sure my web browser and everything else is working now just the windows live.
Once again thax guys
**********
Edit 1:
I recently noticed that I am not able to send the emails out( from any email account setup in messaging) for some reason, but can recieve emails.
I am connected to internet I verified . I can use PIe or Pocket Opera .
I think I am missing somthing while configuring.
Any help will be appreciated.
Edit 2:
Never mind , pop email is working I was missing a small piece of the configuration where you select my smtp server needs authentication.
Hence I was able to recieve since POP3 was authenticating but not the smtp.
Once I selected that it worked.
pr0naLd said:
when you want to use wifi, you have go to advanced in the connections settings and select "my isp"(or make a blank connection with no options) for it to use the WIFI connection, it's a pain, but using 5.99 plan it's worth it
Click to expand...
Click to collapse
or you can dl batterystatus.
There is an option to "disable proxy on wifi" or someting like that
I recently upgraded to Windows Mobile 6.1 and this no longer seems to work. Any ideas on how to get the $5.99 internet back? I did the upgrade primarily because my internet was getting to be unstable under WM6. I would have to reboot the device just to get connected and then after a few minutes the internet would no longer work. It was becoming a major pain.
I like 6.1 (Using the TNT professional) but the internet connection is one of the only reasons I have an MDA and not some regular cell phone.
I will post the tmobile nessesary cabs from the tmobile extended rom when I release V1 of my rom by monday. TWO of the thing that will be included is "winwap" tzones app, which I used to use to get my connection going when my MDA was WM5. also the hotspot login utility (for those who want hassle free wifi at starbucks (you need the plan for that)
I can't post them right now, because It would be a pain to do it from the phone, especialy when I am going to post them later on anyway.
Well, I think the problem was the Radio 2.19 UK. I reflashed it with the Tmobile ROM and the 2.26 US radio and now it works fine. However, I read in a bunch of places that 2.26 US Radio on T-Mobile is screwed up with 6.1.
Any fixes would be awesome.
I use a T_Mobile Africa radio in the us. it seems to work just fine.
when i had to use tzones, i would first open up tzones and start the connection that way. then I could open IE and get on line... but that was so long ago.
villaboy25 said:
Lets make it more easy
load this cab on your device and it will add t-zones icon under program and you are ready to use t-zones.
Its just t-zones wap browser ...not settings.
Click to expand...
Click to collapse
It worked for me. Thanks.
First off let me say ive searched this site high and low and tried almost every .cab ive found and followed plenty of setup instructions but still for the life of me cannot get MMS to work. email i get no problems sending texts i get no problems. but no MMS , and i think ive tried everything on this site.... im running Farias WM6 rom , and love it.
I had MMS working on the phone before i had to reflash beacuse i updated a radio rom and it almost bricked it.... so i followed all the instructions again just like usual and reflashed the downgrade rom and then upgraded to farias. I just dont remember what it was i did to get MMS working before
If someone could help me out it would be much appreciated.....
Maybe we could start a sticky entitled " How to get your MMS back after flashing "
Thanks in advance guys.
You have absolutely no MMS? You cannot receive or send MMS? Who's your carrier?
kegobeer said:
You have absolutely no MMS? You cannot receive or send MMS? Who's your carrier?
Click to expand...
Click to collapse
Yea , no MMS at all......
cant recieve or send.....
I had it working on the Faria rom before i had to reflash.....
all i keep getting is " error syncronizing " everytime i try to hit " send/recieve"
I had the same issue, go under the MMS settings, then goto server, select Cingular MMS or whoever your carrier is, mine wascingular, and then set it to the default and delete the one named default
If there is not other one besides deafault, then you need to ask your provider for your settings and add it.
hope this helps
This might be helpful to others , but i tried it still no worky for me.
stolen from " Jon " on howard forums
Ah! This sorta illustrates the problem. I had mentioned that I couldn't seem to send MMS, although I *could* browse the web via GPRS.
Well...I spent some time on the phone with T-Mobile "PDA Support" and finally have this figured out! There's been talk here about using the two different APN's available to T-Mobile Internet customers for WAP and MMS versus regular website browsing.
When I spoke with T-Mobile PDA Support, I was told a few things:
1) they've had some network problems that aren't 100% resolved that could be messing up our ability to browse the net, consistently get EDGE speeds, or send MMS messages.
2) MMS is supposed to be sent over their WAP gateway, so for this, you should use "wap.voicestream.com" as your APN.
3) Web browsing for full HTML web pages is supposed to be done over their non-protocol-restricted internet gateway, so for this, you should specify "internet2.voicestream.com" as the APN.
I did some experimenting, and it seems that I cannot send MMS when I connect via "internet2.voicestream.com", and I cannot browse the web when I connect via "wap.voicestream.com". But, as the gentleman from T-Mobile PDA Support suggested, when I chose the APN appropriate to the task, I succeeded. I tried this several times with consistent results.
I think I saw some discussion here about manually selecting the GPRS connection each time so you get the right gateway. But with a bit of configuration work up front, you can make this work automatically. Here's how:
The essence of the solution is that you should have TWO different connection setting groups - one for Internet Browsing and email, and one for MMS. Then, you can have the first one automatically invoked when your application tries to connect to the Internet, and you can have the MMS application automatically select the second connection group when it's trying to send an MMS message.
So -- Most, if not all, of you have a connection group named "T-Mobile GPRS". To examine it, click on:
Start / Settings / Connections and then tap the Connections icon. With the Tasks tab selected, you should see two connection groups listed, along with three choices under each one for tasks you can perform.
Under the connection group named "T-Mobile GPRS", click "Manage existing connections" -- you should be on the "Modem" tab -- if not, select it now.
This page shows a table in which you can list various network connections that this connection group can use to send and receive data. Since it seems that the three APNs that we know about are special purpose (one for WAP/MMS, one for Internet, one for VPN), it does NOT make sense to mix them here and let WM5 try to figure out which is best to use -- you will wind up with inconsistent results (i.e., works sometimes, but not others, seemingly at random).
Instead, since this "T-Mobile GPRS" connection group is for Internet browsing, the one and only connection you want to specify here is one that will use the "internet2" APN.
But first, click on the "Proxy Settings" tab below, and just click the box labeled, "This network connects to the Internet", and make sure the other boxes on the pages are blank (no proxy server specified here!). When you're done, select the "Modem" tab again (you might have to minimize the keyboard display at the bottom to see the tabs).
If you don't have a data connection yet that uses the internet2 APN, you can click on "New", then give it a descriptive name (such as "Internet connection"), select "Cellular Line (GPRS)" as the modem, click "Next", and input "internet2.voicestream.com" as the APN, click "Next" again, leave the user name, password and domain all blank and click "finish".
Click "ok" at the top a couple of times and you should be done with the connection group that gets you to the Internet.
Now - we'll create a separate connection group for MMS:
Go back into "Start / Settings / Connections" and tap the "Connections" icon again. You're back at the "Connections" screen that lists your two most recently defined "connection groups" -- the top one should be "T-Mobile GPRS" since we just worked on it. Click on "Add a new modem connection". Even though this line appears under "T-Mobile GPRS", you'll actually be creating a new and separate connection group.
You'll see a screen entitled, "Make a New Connection". Give it a meaningful name -- I chose "WAP connection". Select "Cellular Line (GPRS)" as the modem, and click "Next". This time, under Access Point Name, specify "wap.voicestream.com". Click next and make sure on the "My Connection" screen that user, password and domain are blank, then click "Finish".
You will now have separate connection groups for Internet Access and for MMS tranmission.
The next step is what makes this work automatically. Close all the windows until you're at the "today" screen again. Click "Start" and then "Messaging". If you don't see "MMS" at the top left of the screen, click the "Menu" button at the lower right, click on "Switch Accounts" and select "MMS".
Click "Menu" again, and then click "MMS Configuration...". You'll see three tabs: "Preferences", "Servers" and "About".
The preferences tab has non-critical choices that you should set to meet your own needs.
On the Servers tab, you should see a single server listed, "T-Mobile MMS" -- this was installed by one of the T-Mobile customizations when you first booted up your MDA. Click on this , and you'll see a screen that details the configurat ion of this server. Here's what you want in the config:
Server Name: non-critical, T-Mobile named it, "T-Mobile MMS", so you should probably leave it at that.
Gateway: 216.155.165.50
Port Number: 8080
Server address: http://215.155.174.84/servlets/mms
...and HERE is where we tell it to automatically switch to our network connection that was set up for MMS:
Where it says, "Connect via:", the default that T-Mobile put in was your old "T-Mobile GPRS" connection. Instead, I clicked the drop-down arrow and selected the new connection that we created way up above that references the "wap.voicestream.com" APN, called something like "MMS Connection".
Sending size limitation as locked at 292k. WAP Version defaults to 2.0, but you can drop it down to 1.2 if you have some reason to do this (I don't).
Once this is all set right, click "OK", and "ok" your way back out of the messaging application.
Now you're ready for a test:
There are many way to initiate an MMS. However you do it, when it starts up, you should see it connecting to GPRS via your "MMS Connection", it will then send your MMS and disconnect from GPRS again after a bit.
Open up PIE again and select a website, and this time you'll see GPRS connecting via your first connection group -- the one that uses "internet2.voicestream.com" as the APN.
You can go back and forth several times -- this setup will select the correct network connection group each time, and work.
The ONLY issue I've seen with this is the following:
If your GPRS connection for one type of activity is still connected when you try launching the other service, it doesn't seem smart enough to force the old connection to disconnect first. So...if your old connection hasn't time out yet, you may have to click on the "G" icon (top of your today screen) and select "disconnect" before starting your other activity. But that's it -- aside from this, all the APN switching is automatic -- and works perfectly.
Click to expand...
Click to collapse
ok now im able to send but when it gets to 99% i get a message
" gateway + timeout "
and the message isnt sent
Data Cab
Maybe this is the post you are looking for?
Tmo MMS fix from this thread Receiving TINY Picture Messages!
I have found google search is the best way to search xda-developers.
Just type your search item followed by
site:xda-developers.com
Exp. [tmo mms cabs site:xda-developers.com]
Peace
sYnOnYx said:
ok now im able to send but when it gets to 99% i get a message
" gateway + timeout "
and the message isnt sent
Click to expand...
Click to collapse
sounds like what ever your server settings are, your gateway setting is wrong.
gdribot said:
Maybe this is the post you are looking for?
Tmo MMS fix from this thread Receiving TINY Picture Messages!
I have found google search is the best way to search xda-developers.
Just type your search item followed by
site:xda-developers.com
Exp. [tmo mms cabs site:xda-developers.com]
Peace
Click to expand...
Click to collapse
Ive tried it 2x already and no worky.......
and now im back to " error syncronizing "
*siigh*
Now its connecting up again , and it connects to (edge) Tmo MMS
but it gets to 66% sent on the status and i get
" next hop connection failed "
Someone just texed me and said " nice pic " so i guess it worked ??
not holding my breath just yet, but praying !
*sigh* *arrrrrrrrrrrrrrrrrrrrrrrgggggg*
now its just connects and disconnects.........
Here are my settings tell me if something is wrong :
Under my MMS configuration ( found from the messaging menu )
Servers :
Sever name : T-mobile MMS
Gateway : 216.155.165.50
Port number : 8080
Sever Address : Http://215.155.174.84/servlets/mms
Connect VIA : T-mobile MMS
And
Settings > Connections > connections Icon
Tmobile MMS then under " manage existing connections "
Name : T-mobile MMS
Select a modem : Cellular line (GPRS)
Access Point name : wap.voicestream.com
Username : blank ( ive tried imputting tmobile in there and nothing still )
password: blank ( ive tried imputting tmobile in there and nothing still )
domain : blank
In the advanced tab under TCP/IP :" use server IP address is selected " and
nothing else is.
under servers on the advanced tab " use server-assigned addresses " is only selected.
any clues ?
back to the "Gateway+timeout" error.... sigh...
i dont know what the hell i did , but its sending messages now.........
still havent recieved one tho.
i think im gonna have to do a writeup tho.
Do you use wifi? When wifi is on my MMS doesn't work.
Did you ever figure out what was happening. I'm having a similar problem. As far as I can tell all the setting you listed above are correct, and I have mine set the same. When I try to send a message it hangs at 87% and never completes. Once it ran up to 99% then I got the "Gateway Timeout" error.
What version of the ARCSoft MMS client are you using?
I cannot get it to send or connect at all unless I use one of the CABs for the settings floating around - then it works, but that causes other NASTY side effects on WM6.
Just the one that came with the rom that I loaded, [02/Nov/2007] TNT.1933, ArcSoft 4.2.8.1 with plug-in and full features. The settings seem to connect, the message just won't complete sending.
I'm not able to get it to connect unless I use the T-Mobile CAB (manually configuring does NOT work) and that breaks data connections when on sync.
Hi Guys, just receivied my NEW HTC Touch Pro and I must say... WOW! Was very surprised on how small it was. Anyway, put my SIM in (AT&T US) and charged the battery... Powered it up... It decovered my AT&T service and calls & text messages have NOT been a problem however, it says I am connected to EDGE for DATA but for some reason every time I try to set up my exchange, or surf the web under opera it will show the edge symbol connecting and it does get connected but I receive an error under both active sync and opera. IE will try to load a page and just and it will say it is opening the page but then just stop loading with a blank white screen. Could this be a proxy thing..? Has anyone seen or experienced this? I am using the stock ROM from the unlocked unit.
UPDATE: Sorry about that guys... I had to disable the proxy and I know that AT&T had proxy issues in the past but I thought I would need to configue it first in order for the DATA to work. All I did was uncheck the proxy for internet. By unchecking this, does anything else work or not work..?
go the connections tab in settings -> then Connections -> Advance -> Select Networks then on the first dropdown box make sure there is selected a connection that allows a connection to the internet without filtering ports (eg WAP connections filter most ports)
if this does not do any good it may be something with the proxies but there i don't know how to help
Funny, after I disabled the proxy (unchecked proxy for internet) I was able to get DATA thru active sync, youtube, internet, etc... but I still can NOT get the MMS to work. All the MMS settings under the server settings for MMS are correct and it will get to 100% but then just put the message in the out box. It will try to send 2 more times and then I will get an error message that says: Forbidden. Same thing when I try to receive MMS's. I can see the header for the MMS but can't d/l it. Anyone manage to get MMS working in the US..? I did try to configure the proxy under connections but as soon as I check the proxy tab, all data shuts down.
I have the AT&T Fuze with the stock ROM. I purchased it the first day it came out. I think this was 11/11/2008. I have the PDA Personal plan for unlimited data. I have things set up so that my contacts and email synch with our Exchange server. I can remote desktop from my Fuze using the data network to any machine that I can remote to from my computer, so from that, I am thinking VPN must be configured correctly. On one of these machines that I connect to, I have IIS running and put a very simple web page on it (no script, nothing IE specific). From my work computer, it loads fine. I can remote desktop from my Fuze to any machine on the network and launch IE and load it. But, I can't load it directly from my Fuze in either Opera or IE. It does initiate the VPN connection. But, then I get the error HTTP gateway timed out. I'm really not interested in viewing the page that I created. We use Perforce, which is source control system. It has a jobs portion, which we use to track bugs. There is a web interface to the jobs, which is on the intranet, not internet. I don't have rights to remote to the Perforce server, and that is why I initially tried putting a simple page on a machine that i am an admin on. I want to be able to click on a link in my email and have it load the bug in Opera. If I am home and turn on WiFi, and disable the data network, this works fine. This bypasses AT&T's machines, which makes me think there is something that AT&T is blocking. And if they are, then maybe it is the AT&T bloat this is telling them what it is. Our IT guy has verified that I am successfully VPNing in. He is seing the mycingular.net in the firewall.
My boss has the same phone, but purchased more recently, and his is working fine for this. He has flashed the new AT&T test ROM, and done the thing that keeps the AT&T bloat from getting installed.
The fact that remote desktop works, but browsing a webpage on the same machine does not, makes me think there is more to this than just network settings.
If anyone has the anwer to this, please share. If I find the answer, I will post it is well. I have extensively searched the forum for the answer to this, and have not found anything that worked. If I have missed something, I appologize.
Sort of works now, still have an issue
After going to the proxy tab, and checking that This network connects to the Internet and checking the check box that this network uses a porcy server to connect to the internet. Then specify the server. Then go to Advanced and change the HTTP port to 8080 instead of just 80. I also put the user id, password and Domain in on the proxy for HTTP.
But I get prompted for a user id and password from the proxy erveer. I have entered it and clicked the checkbox to save it. It does not display the same info that I entered the next time and it does not display what was entered on the HTTP proxy page. It is a drop down, and I can select the correct one. It's just annoying to need to. I'd like to clear this cache.
Also, to initially get it working I had to disable HSDPA and HSUPA, restart. Then reenable it. I have the registry on my Fuze which give me the menu option on the Advanced network tab to do this.
Figured out how to clear the cache issue - still prompts
The cache was a setting in Opera for passwords.
It still asks for the password. At least it is prefilled with the correct info, since I now only have the one entry, so it is just 1 click, but I should not need to do this step.
Any one know what I need to do to fix this.
If I try to load it in IE, it just tries but never succeeds and never asks for a password, just says Opening.
Connections
Why should I need to set this to connect to the Internet, and use the ISA server? I would think if it needs to connect to the internet, it should be able to just use the Media Net
My Media Net Settings are
Modem -
Name - Modem
Media Net - wap.cingular
Advanced shows the modem in the drop down list as Cellular Line (GPRS, 3G)
The drop down is disabled
Next
Access Point Nam - wap.cingular
Next
User name - [email protected]
don't know what the password is. I've never changed it.
Domain is blank
Next
TPC/IP
Use server - assigned IP address is selected
Use software compression and use IP header compression are checked.
Use slip is not checked and the checkbox is disabled
Servers
Use Servr Assigned addresses is selected
So DN,Alt DNS, WINS, and ALT WINS are disabled.
Proxy Settings
This network connects to the internet
This networks uses a proxy server to connect to the internet is not checked.
More info and additional question
Navigating to some intranet sites does not prompt me for the isa server.
such as http://machine/virtdir/Default.aspx
seems to work without being prompted
but
http://perforcemachine:8080/@md=d&cd=//&[email protected]//?ac=107&mx=25
prompts me for the password.
Also, in order to get either of these links to work, I need to have in my exceptions:
*.companyname.com/*
Where companyname is the actual companyname.
This is annoying because it makes it connect to the VPN when synching with the exchange server. Before I want on the quest to get these links to intranet sites to work, I synched with the exchange server without connecting to the VPN.
I've tried putting in isa.companyname.com in the exceptions, but that doesn't work.
Is there a way to do *.companyname.com/* except mail.companyname.com?
I suspect all of this is in the registry somewhere.