Does anyone know where I could download the stock Alltel 2.1 rom for the hero? If not is there a good sprint rom around here that will still allow me to activate the hero and update prl etc???
Thanks!
Try Krome
My friend, who has an alltel hero, had success updating his prl on the KromE rom.
krome is built from the ACG 2.1 update. alltell is in the ACG so its the same ruu as the alltell stock....
HELP! Need alltel stock rom
ok i did the alltel hero one click root and flashed cyanogen 6 rom and everything works great even did nandroid backup. now when i was messing with the new rom i partioned the sd card and removed nanoid.img for back up i have the folder it created and was woundering since img file is now gone is there a stock alltel rom i can flash to go back to 2.1 sense ui again?
xPOOx Pycho said:
ok i did the alltel hero one click root and flashed cyanogen 6 rom and everything works great even did nandroid backup. now when i was messing with the new rom i partioned the sd card and removed nanoid.img for back up i have the folder it created and was woundering since img file is now gone is there a stock alltel rom i can flash to go back to 2.1 sense ui again?
Click to expand...
Click to collapse
I did the flash to cyanogen and like a 'tard didn't backup the alltel stock rom. Is there anyplace to get it so that I can flash back?
search button works great on this site...
I can't post outside links but search for [HOWTO] Root on Alltel CDMA Hero thread.
Post 170 is what you want
dsmitty166 said:
search button works great on this site...
I can't post outside links but search for [HOWTO] Root on Alltel CDMA Hero thread.
Post 170 is what you want
Click to expand...
Click to collapse
Found that, now I cant get gmail/contacts to sync.
Related
Hello,
I upgraded to the unofficial leaked HTC froyo and desperately wait both root and possibly upgrade to OTA 2.2 (or downgrade.) I went to do the prl hack described in another thread which was exceedingly useful and found that ##PRL# doesn't work. This has been commented on a few times in various threads in the last few days.
Someone in one of the threads briefly commented on it but the knowledge doesn't seem to have been picked up by everyone.
I was able to update my prl to a file of my choosing using the demo of CDMA Workshop. Follow the instructions to setup CDMA Workshop in the thread covering how to get your MSL#. After getting your Evo running and connected to CDMA Workshop, go to the "Other" tab, click write in the PRL subcategory and select the prl file located on your computer. Disconnect, restart your phone and it should say the new prl# in the About Phone stuff.
edit: i am retarded
^i couldnt agree more.
Sent From My Evo Running Froyo Rooted
can OP or mod change the title of this to [HOW TO] Change PRL on FroYo or something similar please. slightly uninformative title currently. thanks.
edit: nice title change
This tutorial is in the "General" Section
Just to let you guys know...this method doesn't work if you're running CM6. When trying to write the PRL, you get this error: "60669.prl is not a valid PRL file"
12MaNy said:
Just to let you guys know...this method doesn't work if you're running CM6. When trying to write the PRL, you get this error: "60669.prl is not a valid PRL file"
Click to expand...
Click to collapse
yah, because CM6 isn't based off of the OTA 3.26.651.6 build.
anything based off of that build should have no issues.
this is why i stick to ROMs that are really close to stock. never have any issues.
I'm on Flipz Rom and my. Prl updated just fine
sent with my evo from a secret place
i just did a nandroid backup of my cm6 install. flashed over the rooted froyo official long enough to update the PRL then restored the cm6.
CM6 PRL update
gx1400 said:
i just did a nandroid backup of my cm6 install. flashed over the rooted froyo official long enough to update the PRL then restored the cm6.
Click to expand...
Click to collapse
I did the same thing to update PRL. I started out running CM6 nightly builds, currently running CM6 RC1. Did a nandroid backup, then restored Fresh 1.0.1 and updated PRL from 60662 to 60668. After that I restored CM6 RC1.
So I've rooted my phone already, I had updated to the .6 Sprint release and went back to .5 and used that method. My wife's Hero is still on 1.5. I'd like to be able to back up all of her apps before flashing a custom ROM.
My question, is there any drawback to rooting from 1.5 and then installing a custom ROM like Regaw's, or Fresh, or Nfinite's, or CM6? Am I able to do this without first running the .5 RUU? Will I need to manually upgrade the radio if I do this?
Sorry for all the questions, I know how to find all of these root methods, but not sure what method is best to make sure I get everything updated and running properly.
Thanks!
fallonjp said:
So I've rooted my phone already, I had updated to the .6 Sprint release and went back to .5 and used that method. My wife's Hero is still on 1.5. I'd like to be able to back up all of her apps before flashing a custom ROM.
My question, is there any drawback to rooting from 1.5 and then installing a custom ROM like Regaw's, or Fresh, or Nfinite's, or CM6? Am I able to do this without first running the .5 RUU? Will I need to manually upgrade the radio if I do this?
Sorry for all the questions, I know how to find all of these root methods, but not sure what method is best to make sure I get everything updated and running properly.
Thanks!
Click to expand...
Click to collapse
You do not need to ruu at all unless you have to take your phone in for service under warranty.
No problems at all. Once you are rooted and have recovery installed you can flash away. Just remember to wipe EVERYTHING in between flashings. It will save u a ton of annoyances.
My opinion is go straight to CM6 it is amazingly fast and stable. Just in case you dont know the link to the IRC channel for CM6 here it is: http://webchat.bikcmp.com:9090/?channels=hero-cdma
Welcome to the HERO and be careful. Flashing is VERY addictive.
Bought captivate from craigslist, from a guy who works for HP and said he got official AT&T 2.2 ROM on it from a buddy of his.
Attached screenshot (taken from another captivate) - Is it official AT&T or a mod?
JI6 is the unofficial 2.2 leak that all of our other 2.2 roms are based off of. The official 2.2 rom hasn't been released yet.
Can I upgrade to official ROM when it releases?
Or do I have to do something to force it? I don't want to be struck with this version if it's unofficial
ODIN usually gets you back to stock as long as you have the 3 button combo
The official firmwares are utter garbage.
Sent from my Captivate.
There is currently no office release of 2.2 (Froyo) for samsung captivate!
There however are a ton of unofficial copies of the unofficial leak.
All unofficial copies still use a beta version as their source, but if it works ok for you then I would not roll back to 2.1.
Personally, I stayed on 2.1 due to the 2.2 bugs that bothered me.
That's a leak we've been using for a while. You can go back to the current stock ROM with the tools in this thread.
Can you point me what bugs I can expect?
alphadog00 said:
All unofficial copies still use a beta version as their source, but if it works ok for you then I would not roll back to 2.1.
Thanks for all replies....
Personally, I stayed on 2.1 due to the 2.2 bugs that bothered me.
Click to expand...
Click to collapse
This phone is for my wife and I want to go back to 2.1 now, instead of wiping the data later
rajetta said:
This phone is for my wife and I want to go back to 2.1 now, instead of wiping the data later
Click to expand...
Click to collapse
There's a whole thread about 2.2 bugs in the General forum.
There isn't really any way to just 'downgrade' back to 2.1 without losing your data. Your best bet is to install Titanium Backup, Rom Manager and the 2e recovery.
The 2e recovery will allow you to use Rom Manager to boot to the clockwork recovery where you can do a Nandroid backup of your rom, in case anything breaks while you are flashing 2.1.
Titanium Backup will backup all your apps and whatnot. You would use the ODIN one click 2.1 installer to go back to the stock factory 2.1 install, which will also wipe your phone clean. Then you would install Titanium Backup again from the market, and restore all your apps that you backed up before you flashed back to 2.1.
I knew craigslist had the "official" Froyo update!
Swyping...please read slowly!
I don't mind losing data, what is the quick way to go back to 2.1?
I don't mind losing data, what is the quick way to go back to 2.1?
Calls drop frequently , so the phone is unusable.
Thanks -
Raj
modest_mandroid said:
There's a whole thread about 2.2 bugs in the General forum.
There isn't really any way to just 'downgrade' back to 2.1 without losing your data. Your best bet is to install Titanium Backup, Rom Manager and the 2e recovery.
The 2e recovery will allow you to use Rom Manager to boot to the clockwork recovery where you can do a Nandroid backup of your rom, in case anything breaks while you are flashing 2.1.
Titanium Backup will backup all your apps and whatnot. You would use the ODIN one click 2.1 installer to go back to the stock factory 2.1 install, which will also wipe your phone clean. Then you would install Titanium Backup again from the market, and restore all your apps that you backed up before you flashed back to 2.1.
Click to expand...
Click to collapse
rajetta said:
I don't mind losing data, what is the quick way to go back to 2.1?
Calls drop frequently , so the phone is unusable.
Thanks -
Raj
Click to expand...
Click to collapse
Read what you quoted - Odin One click will get you back to 2.1. Read the captivate bible thread in the dev section.
I'm (obviously) a bit of a newb when it comes to android, and I was flashing back from cm7 to see how it was done. When I reinstalled GRJ22, everything was working fine. I then downloaded and flashed the OTA update to GRK39C (or so I thought). It turns out it was the update to GRK39F, which apparently is ATT or GPRS specific. My phone now thinks it's on ATT and is trying to use GPRS.
I'm on Telus in canada, and use HSPDA.
The phone was also showing baseband version I9020AXXKF1, it should be I9020AUCKD1.
I've tried restoring from a backup, flashing back to cm7 and to stock fw's, and even tried flashing the radio.
My phone still shows GPRS, and now baseband version shows I9020AXXKD1.
Is there any way to fix this? I hope someone here is knowledgeable about this...
That baseband is associated with the i9020t, or the t-mobile variant. The canadian nexus s is identical to the at&t version.
There is a sticky with all the roms. Use it and get the right rom installed
Unfortunately, the ROM I need seems to be one of the missing ones. Is there any way to backup the radio from my wife's (identical) phone and flash it to mine?
It looks like the file I need is 5282b5b3eb74.signed-sojua-ota-178324.5282b5b3.zip but I'm unable to locate a working link for the file. Can anyone tell me if this is correct and/or provide a live link?
Actually that particular one you want has broken tethering... This is a dump is the 2.3.4 with I9020AUCKD1 radio from my US import i9020a tested and working on SaskTel HSDPA+.
http://dl.dropbox.com/u/7812800/Stock-GRJ22-i9020A-unsigned.zip (will need to be flashed via CWM Recovery)
Thanks! I got it working by flashing the unsigned ROM in the sticky thread, and I'm running cyanogenmod 7.1 RC now. I'll keep the stock ROM on file just in case though...
r.asimi said:
Thanks! I got it working by flashing the unsigned ROM in the sticky thread, and I'm running cyanogenmod 7.1 RC now. I'll keep the stock ROM on file just in case though...
Click to expand...
Click to collapse
Cool... I hope it works out well for you.
btw i got a rooted version of the stock 2.3.4 if you are interested as well.
So, for some reason flashing with your ROM set my phone to UMTS. Can someone refer me to a howto to backup a full ROM image from a phone, since my wife's is working fine and is on the right type of network.
well right now I'm currently flashing the cm7 rom. I can't send/receive any mms right now. I've tried searching and I've tried a lot of things, but nothing seems to be working. I also miss my stock froyo as well. So I was wondering if I can revert back to the original stock froyo, but still be root.
I used rom manager and I backuped the orginal rom before I flashed the cm7 and the addons, but I don't know where it use or even how to go about it . Can I use that to revert back to the orginial rom and will I still be rooted?
I'm currently on the mytouch4g and if you know where I can download the rom for froyo please post a link.
thank you very much.
mytouch4gnoob said:
well right now I'm currently flashing the cm7 rom. I can't send/receive any mms right now. I've tried searching and I've tried a lot of things, but nothing seems to be working. I also miss my stock froyo as well. So I was wondering if I can revert back to the original stock froyo, but still be root.
I used rom manager and I backuped the orginal rom before I flashed the cm7 and the addons, but I don't know where it use or even how to go about it . Can I use that to revert back to the orginial rom and will I still be rooted?
I'm currently on the mytouch4g and if you know where I can download the rom for froyo please post a link.
thank you very much.
Click to expand...
Click to collapse
Hi, the answer to your question is actually in your post...if you backed up your froyo rom with the rom manager, then you just have to restore the backup.
To do that, go to the Rom manager, manage and restore, and then find your backed up rom. It should take a while and you will be back to the state you were before flashing CM7. Just in case make a nandroid backup of your current rom in case things don't go as expected. It should be working neatly. Hope it helps. Let me know if you could restore it. See ya....
mytouch4gnoob said:
well right now I'm currently flashing the cm7 rom. I can't send/receive any mms right now. I've tried searching and I've tried a lot of things, but nothing seems to be working. I also miss my stock froyo as well. So I was wondering if I can revert back to the original stock froyo, but still be root.
I used rom manager and I backuped the orginal rom before I flashed the cm7 and the addons, but I don't know where it use or even how to go about it . Can I use that to revert back to the orginial rom and will I still be rooted?
I'm currently on the mytouch4g and if you know where I can download the rom for froyo please post a link.
thank you very much.
Click to expand...
Click to collapse
Hey i also have a Mytouch 4G and i have looked around before but couldn't seem to find a Stock froyo rom that is rooted. I would recommend you use a different ROM other then CM7. There are plenty of roms in the mytouch 4g section. we also have a great dev TheDerekJay does an amazing job with keeping all his roms updated. im using his MIUI rom on my mytouch and im in love with it.
actually I just looked at my rom manager backup file. and it says the date for today... I used mybackup root to just back up my data because I was planning on changing my rom. So I'm seriously am confused now... I back uped the rom (froyo) just yesterday so shouldn't it say that 1/1/2012 instead of 1/2/2012? Should I just flash this backup anyway and hope for the best?
mytouch4gnoob said:
actually I just looked at my rom manager backup file. and it says the date for today... I used mybackup root to just back up my data because I was planning on changing my rom. So I'm seriously am confused now... I back uped the rom (froyo) just yesterday so shouldn't it say that 1/1/2012 instead of 1/2/2012? Should I just flash this backup anyway and hope for the best?
Click to expand...
Click to collapse
I should have the date and time when you did the backup...but if It was after midnight or your time zone is not correct that might affect the name. If it is the only backup you did then it must be it. Let me know after you flashed it how things resulted.
thanks glevitan. You were right the time zone is probably not set correctly. I restored the file and I'm back to the original stock froyo and I'm still rooted I'm very happy now. thank you so much.
mytouch4gnoob said:
thanks glevitan. You were right the time zone is probably not set correctly. I restored the file and I'm back to the original stock froyo and I'm still rooted I'm very happy now. thank you so much.
Click to expand...
Click to collapse
You're welcome...enjoy your new/old rom. See ya!