Database Info

My touch pro 2 has been bricked

I posted this in another thread as it was similar (though for tmobile), but I believe I haven't gotten any answers there I was hoping to try here:
I was installing winmo msn messenger. It installed fine and reset my tp2 fine. It goes thru the tp2 splash screen, the verizon splash screen and the winmo splash screen. Then it shows owner information and this is where it gets screwed up. Owner info will stay up forever if I dont touch the screen. After touching the screen the only thing left will be the top bar and the rest of the screen stays black. The only things on the top bar are the signal icon (which always has an x), the wifi icon (which seems to be connected fine lol) and either owner info will still be in the upper left or the start menu will be there. Hitting the screen only causes my tp2 to beep.
Nothing I know how to do (which is basically just hard and soft resetting it) works. Verizon can't fix it (didnt think they would be able to) and I can find no drivers (possibly cause I'm still a noob with winmo) to resolve my issue. I'm not even sure how I'd get them on as it wont even sync up to my computer and my computer cannot find its hd. If I could get a rom for the verizon one I think I can figure it out from there with no issues...but htc website sends me to verizon website for support and vice versa. The htc wiki is the closest I've gotten to an answer...but no rom to download. The only OEM roms I can find anywhere aren't for this phone, unless one of those will work? You guys are the experts.
Does anyone know what I can try? Verizon wants me to return it but cannot tell me when I'll get my new one as they are out of stock...again. Please help lol! Thanks for any and all help because I NEED a phone and can't wait around for them to decide to include them in the next shipment, nor would I appreciate being given some other type of phone in the mean time simply because I paid for the tp2, if I had wanted another phone I would have bought it instead.

if you do just a litle searching over at ppcgeeks, there's info about shipped roms and where to get them. (not sure if its kosher to post a direct link to it or not, given that these are shipped roms). hopefully that will help, otherwise, dunno what to tell ya.

First off, I can tell you that installing MSN Messenger would NOT brick your TP2. There are other problems with the phone, most likely a bad mfr rom. If you performed a hard reset (You did didnt you?) it would reload the factory rom.. so if your phone is still bricked, your factory rom is hosed, or your phones hardware is hosed. Installing MSN Messenger would not do this by itself.
Learning from trial and error is a tough road. Return the phone for a new one while you still have the option. You got a get out of jail free card, now is the time to use it.

twostep said:
if you do just a litle searching over at ppcgeeks, there's info about shipped roms and where to get them. (not sure if its kosher to post a direct link to it or not, given that these are shipped roms). hopefully that will help, otherwise, dunno what to tell ya.
Click to expand...
Click to collapse
I checked over there, but if you're saying it's there then it's obvious I need to check again. Also seeing as you've suggested this I'm guessing:
bipolarmadman said:
I'm not even sure how I'd get them on as it wont even sync up to my computer and my computer cannot find its hd.
Click to expand...
Click to collapse
Isn't as big of an issue as I thought it was? And if it isn't...how do I get around this?
DragonNote said:
First off, I can tell you that installing MSN Messenger would NOT brick your TP2. There are other problems with the phone, most likely a bad mfr rom.
Click to expand...
Click to collapse
I'm not entirely sure what you mean by mfr (I'll hit up google after this) but I can tell you only what I know. My phone worked fine for 3 days. Once I got it set up like I wanted and was ready to start installing other crap I did so, I started with MSN.
DragonNote said:
If you performed a hard reset (You did didnt you?) it would reload the factory rom.. so if your phone is still bricked, your factory rom is hosed, or your phones hardware is hosed. Installing MSN Messenger would not do this by itself.
Click to expand...
Click to collapse
bipolarmadman said:
Nothing I know how to do (which is basically just hard and soft resetting it)
Click to expand...
Click to collapse
Yup got the hard reset in there, it just didnt do anything. However, one thing I did not was that there were numerous postings with different ways to hard reset the device. The only one I could get to do anything at all was pressing volumn down + reset while the phone was off but it stayed at the tri color screen without much else going on...so I coulda just done the wrong one or did it wrong all together. If I did please point me in the right direction.
Like I said before I can't say if it was screwed from the time I first turned it on as this is my first smartphone and first experience with tf3d (I've had many pda's though) but it had been soft reset multiple times prior, along with a couple of hard resets, and had no issue bouncing back from those. Reset after MSN install...hosed. Not that I'm saying your wrong, you guys are the experts here, but from what I've experienced regardless of what caused it msn will certainly not be going on my next smart phone. I'll opt for one of the all in one apps like I was going to before I decided to go with a name I trusted.
DragonNote said:
Return the phone for a new one while you still have the option. You got a get out of jail free card, now is the time to use it.
Click to expand...
Click to collapse
Got no choice about this. The only issue I have with this is the fact that they can't tell me when I'll get my new phone. Plus I have only 1 of 2 choices:
1. Mail my phone back and get a refurbished one in return....uhm...no
2. Take my phone back to the verizon store I got it at, get my refund, and hope to god that I can get another one the next time they get it in stock.
I'm not trying to ***** and complain...just trying to find a way to fix it without a)paying 300 for a refurbished phone, or b)going an unknown amount of time without my phone.

does your start menu drop down when you hit it? When i go to settings/today/items and uncheck the TouchFLO 3d my screen is just as you describe. Its pure black with the top bar available. Did you check to see if the touchflo 3d is turned on?

bipolarmadman said:
Yup got the hard reset in there, it just didnt do anything. However, one thing I did not was that there were numerous postings with different ways to hard reset the device. The only one I could get to do anything at all was pressing volumn down + reset while the phone was off but it stayed at the tri color screen without much else going on...so I coulda just done the wrong one or did it wrong all together. If I did please point me in the right direction.
.
Click to expand...
Click to collapse
You went into boot loader mode. I did a hard reset on my sprint version but I dont remember how technical support told me. I think it was power off the phone. push and hold 'up' volume key, then hit and hold the reset switch till the phone boots. This will start off looking like a normal soft reset, but it will take much longer, your phone will be erased of all info you put in and it will do an instalation of software and reboot right before touchflo starts . I dont think you will ever get a tri-color screen (i could be wrong), which is what you get when the phone is expecting a rom flash from a computer. the whole process probably takes like five minutes, and theres a spot right after it starts it looks like your phone is doing nothing (Leave it be!). I've been messing with a lot of phones recently, and i dont remember if you got to hold the up key and reset button till you get a hard reset warning or not. (it might tell you all your data will be erased, and whether or not to continue)
edit:
just did a quick google and confirmed it on my sprint touch pro2. push and hold 'send' and 'end' key. Using your teeth, push and hold the 'reset' button with the stylus. finaly, push the power button. (all three need to be pressed down when you hit the power). the tri color screen flashes, then a white screen warns of the reset and says push 'up' volume key to continue, any other key to cancel. Hope this helps.

When you did the hard reset, did you get a warning that all data was going to be erased and where you asked to enter something to confirm? If you didn't, then you have not done a hard reset.
I had to try several times to get mine to hard reset. Even though I hit the proper keys, the phone would just soft reset, not hard reset. I can see how you can easily be fooled thinking you did a hard reset if you don't know what to look for.
I think there are different key presses for Verizon vs Sprint. Make sure you're using the right one.
BTW, "mfr" = manufacturer . . . i.e. HTC

SecretAgentMan said:
When you did the hard reset, did you get a warning that all data was going to be erased and where you asked to enter something to confirm? If you didn't, then you have not done a hard reset.
I had to try several times to get mine to hard reset. Even though I hit the proper keys, the phone would just soft reset, not hard reset. I can see how you can easily be fooled thinking you did a hard reset if you don't know what to look for.
I think there are different key presses for Verizon vs Sprint. Make sure you're using the right one.
BTW, "mfr" = manufacturer . . . i.e. HTC
Click to expand...
Click to collapse
Confirmed. The Verizon HTC TP2 Hard Reset is the same as T-Mobile but is different from Sprint.
With POWER OFF, hold Volume Down while pressing SEND (green) and END (red). It takes about 4 seconds to take. WARNING: THIS IS A HARD RESET, BACK UP YOUR CONTACT LISTS AND DATA. EVERYTHING BUT YOUR OEM INSTALL WILL BE WIPED.
Go here for more info:
http://www.htc.com/us/faqs.aspx?p_id=287&cat=90&id=106176

I actually ended up calling HTC about 6hrs ago (5 pm est) and they did confirm what i had already started thinking. Verizon tech support has no idea what the hell they are talking about when it comes to this phone.
@spunks74 you're absolutely right, this is just what htc said and is where I finally figured out....verizon needs to get this phone in their techs hands instead of giving them pictures and text.
@DragonNote this is exactly what htc told me after they told me verizon didnt know how to hard reset. thanks for the info, even if i called htc before checking here. thank god im obsessive about backups or I would have been screwed because once this happened....nope no way to do anything at all. Also, for other forum members that may not know, the link you provided (for t-mobile) is completely different than the link for the hard reset for verizon:
http://www.htc.com/us/faqs.aspx?p_id=294&cat=0&id=110490&f=t
which is why i was at such a loss during this issue...I couldn't get that far lol. I read sooo many different ways to hard reset the phone but none worked. obvviously i never checked to seei f the different providers would hard reset different ways. i just assumed they would all reset the same way (i guess this time assuming only made an ass out of me) so i found myself looking at ways to reset the touch pro 2 and ways to reset the rhocium, which is where all the different variations can be found.
@mjcole2003 Without touch flo i recognize the gui right away, and the first time it happened i did think i had just jacked up the flashy gui, but while it was the bare winmo gui there was nothing I could do. any screen touch, any keypress all ended with the same outcome I'd touch/press and the device would only *beep*

bipolarmadman said:
I actually ended up calling HTC about 6hrs ago (5 pm est) and they did confirm what i had already started thinking. Verizon tech support has no idea what the hell they are talking about when it comes to this phone.
@spunks74 you're absolutely right, this is just what htc said and is where I finally figured out....verizon needs to get this phone in their techs hands instead of giving them pictures and text.
@DragonNote this is exactly what htc told me after they told me verizon didnt know how to hard reset. thanks for the info, even if i called htc before checking here. thank god im obsessive about backups or I would have been screwed because once this happened....nope no way to do anything at all. Also, for other forum members that may not know, the link you provided (for t-mobile) is completely different than the link for the hard reset for verizon:
http://www.htc.com/us/faqs.aspx?p_id=294&cat=0&id=110490&f=t
which is why i was at such a loss during this issue...I couldn't get that far lol. I read sooo many different ways to hard reset the phone but none worked. obvviously i never checked to seei f the different providers would hard reset different ways. i just assumed they would all reset the same way (i guess this time assuming only made an ass out of me) so i found myself looking at ways to reset the touch pro 2 and ways to reset the rhocium, which is where all the different variations can be found.
@mjcole2003 Without touch flo i recognize the gui right away, and the first time it happened i did think i had just jacked up the flashy gui, but while it was the bare winmo gui there was nothing I could do. any screen touch, any keypress all ended with the same outcome I'd touch/press and the device would only *beep*
Click to expand...
Click to collapse
copy that. my condolences for your loss. I would have them replace it immediately. Too much BS for a new ppc. Only makes you wonder what else is wrong with it.

Why don't you do a hard reset via Clear Storage in settings? This surely seems like something that can be fixed with a hard reset.

isdnmatt said:
Why don't you do a hard reset via Clear Storage in settings? This surely seems like something that can be fixed with a hard reset.
Click to expand...
Click to collapse
Because as the OP said he cant do anything inside the GUI. IE hard reset is only option.

My mistake

Edit: nvrmind, problem solved.

HTC Touch Pro 2 Brick

Dear Folks at XDA,
I would like to ask for you help with my HTC Touch Pro 2. I recently tried to update it to the new AthineOS CHome TF3D WM6.5 Manila ROM v 1.0 and unfortunately I failed.
The problem is that my phone now freezes at the black startup screen with the Touch Pro 2 logo and the red codes at the bottom.
I've flashed the ROM several times before and never got this issue.
Due to the fact that the phone doesn't finish the boot-up and I thus I can't get ActiveSync I'm afraid I messed up my phone for ever.
Please someone tell me I got a way out of this, I'd appreciate it very much.
Greetz,
SjonSjon

umm.... I don't think you can change the firmware just yet on the CDMA version of the phone... if you used a HardSPL that's available in the Rhodium forums then you probably used a GSM specific ROM on your CDMA phone... not sure what to tell you other than making sure you read the CDMA forum before trying something so risky. Best solution, unless someone knows how fix your phone in it's current state, is to toss it under your car and run it over and try to cash in on the insurance.

Problem solved!
Hey guys,
I got my HTC Touch Pro 2 functioning again. Thought I'd post the solution for other people who might encounter the same issue. I don't exactly know what the problem was. I'm assuming a non-compatible ROM or something, but after opening 30 tabs in my browser and reading my eyes out I found that if you put your phone into bootloader mode and connect it through usb to your computer you can flash the ROM without using activesync.
So I turned my phone off, pressed the power and Volume Down button simultaneously and then used the Stock ROM upgrade software from HTC to restore my phone
This solution beats the hell outta "run it over and try to cash in on the insurance" if I say so myself!
Greetz,
SjonSjon

I am glad you have recovered the beautiful device; and thanks for sharing a working solution.

sjonsjon said:
Hey guys,
I got my HTC Touch Pro 2 functioning again. Thought I'd post the solution for other people who might encounter the same issue. I don't exactly know what the problem was. I'm assuming a non-compatible ROM or something, but after opening 30 tabs in my browser and reading my eyes out I found that if you put your phone into bootloader mode and connect it through usb to your computer you can flash the ROM without using activesync.
So I turned my phone off, pressed the power and Volume Down button simultaneously and then used the Stock ROM upgrade software from HTC to restore my phone
This solution beats the hell outta "run it over and try to cash in on the insurance" if I say so myself!
Greetz,
SjonSjon
Click to expand...
Click to collapse
Good job!

big thanks for solution.

You just saved my life!!!

Don't get our hopes up! This is the wrong forum. CDMA TP2s can't be flashed at all yet.

This was a life saver post so a quick bump for anyone that needs it.
I unlocked my CDMA phone, installed a few roms -- decided to go back to my stock rom default (which was Telus) -- reinstalled and bam -- bricked.

Well, technically it's not a brick if you can get back into the bootloader to reflash. So no worries everyone. If everyone reads instructions well enough we should hopefully see zero "real" bricks. Or at most, just enough to only build bbq pit rather than a house.

I think my phone is truly bricked
I was unlocking my phone (the HTC Touch Pro 2 <Verizon>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. Let me know if you need any more information.

my cdma is rebooting endlessley i reflashed stock rom and evorything. it seriously dosnt want to work. its most sadness... i am cashing in on the insurence. but they are going to send me a refurb..
spend 600$ on a phone got inurnce i hope the used one dosnt fail me.

Esazi said:
I was unlocking my phone (the HTC Touch Pro 2 <Verizon>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, I would really appreciate it. Let me know if you need any more information.
Click to expand...
Click to collapse
I did the same exact thing to mt TP2. Same outcome.

We have to learn somehow....
That stinks man. If you did, then your phone is truly bricked. You are going to have to get a replacement or switch to another phone because there is nothing you can do to get it going again. I tried everything possible and eventually just ordered a replacement. I have it now and it's working beautifully, but needless to say I am a little scared away from any more unlocking or flashing for a while.

If you read carefully you dont have to be scared of flashing
I was a noob some time ago but before doing anything I took care of reading and understanding before doing nothing.
lesson learned
By now I have flashed more than 60 times on 3 diferent HTC devices and all were a succes
Hope you get your TP2 working again!

I hope I can get there
Someday I hope to be a flashing expert, but until then I will take it slow and read carefully. Thanks for your encouragement. When I actually get money to pay for the unlock for my TP2, I will let you know how flashing goes.

How do you keep the phone in bootloader? Mine goes right to the press volume instuction screen. Other than that I'm stuck on the black name screen,also my usb will not register in device manager. This was my first try at flashing.

gadgetgirl28 said:
You just saved my life!!!
Click to expand...
Click to collapse
Holy hell, you're not lying. Thanks for coming back to post your solution!
This post saved me at least a few hours of frustration and ever worsening decision making.

So it's totally true???
this situation hasn't solution;
I was unlocking my phone (the HTC Touch Pro 2 <SPRINT>) and I was using a Diamond unlocker (I thought it would be fine), but during the process there was a connection error and now my phone seems to be bricked. I can't get it to even turn on, get to a bootloader screen, or anything even remotely close.
The one odd thing that it does though, is when I connect it to my computer, it pops up and my computer recognizes there is a device there. In my Device Manager there is an unknown device called: Qualcomm CDMA Technologies MSM. I have tried every combination of two buttons, including holding down the reset button with all of them, but nothing gets me anywhere.
If anyone could help, AND PLEASE somebody tell me , that it can be save it
;9

please help
i have the same problem. is there a way to save my phone?

[Q] Anyone has experience on replacing a rooted SK?

There's a lot of threads on replacing rooted droid phones. But i couldnt find anything on Samsung T-mobile phones.
i bricked the rooted sidekick 4G yesterday (a hard brick, when i boot the phone, it doesnt turn on, only a little back light comes up, no samsung logo; when i release the power, screen goes back to dark). And today i asked for a replacement and it will arrive in a week.
When i send back the brick phone, they told me to take out battery, battery door and sd card. Then they will check what happened to it when they get the front piece of the phone
So my question is are the tech people able to find out my phone was rooted and void the warranty. Or they will just replace the phone since they cant really turn on the phone to check anything.
Thanks in advance guys!

they will just pop in a test battery n see if its hardbricked

For your sake, you probably don't want to go flashing your device again. But, they probably aren't going to specifically know the device was rooted. You erased everything when you flashed the device..
I still doubt you really bricked it...
Sent from my SGH-T839 using XDA App

xtrem88 said:
they will just pop in a test battery n see if its hardbricked
Click to expand...
Click to collapse
what if it is hard bricked? does that included in the warranty, or they will charge me extra money?
@orange: the problem is, it wasnt really bricked at the beginning, i was still able to get into download mode, so i tried to restore it with odin.
But idk what happened during the restore, the phone just wont boot after that, nor get into download mode/recovery mode. So im pretty sure its hard bricked =[

sheolito said:
what if it is hard bricked? does that included in the warranty, or they will charge me extra money?
@orange: the problem is, it wasnt really bricked at the beginning, i was still able to get into download mode, so i tried to restore it with odin.
But idk what happened during the restore, the phone just wont boot after that, nor get into download mode/recovery mode. So im pretty sure its hard bricked =[
Click to expand...
Click to collapse
Samsung phones are damn near impossible to hard brick thanks to Odin, but even so if you turn it in they won't know anything if they can't even boot the phone up, they will through the battery in, see it doesn't boot, and send you a new one. They don't have the same tools we have

xmeatizmurderx said:
Samsung phones are damn near impossible to hard brick thanks to Odin, but even so if you turn it in they won't know anything if they can't even boot the phone up, they will through the battery in, see it doesn't boot, and send you a new one. They don't have the same tools we have
Click to expand...
Click to collapse
thx for the answer =]
ye, they will send me the replacement first and ill send back the bricked one. We'll see what happens after they check the phone =]

OP I have the exact same issue, Did they replace the handset no problem? No Out Of Warranty fee?

Help (if possible)! think my phone is done :(

This is going to be long!
If anyone has insight to this would be appreciated
Precursor: I am on CM9 nightly (7-27-12) with 6.0.1.0 non touch recovery (NS4G)
So last night I go to open my opera web browser and it would flash like it would open and instant close (no error message). I say OK thats weird and decide to reboot. Upon rebooted I am greeted with never ending amount of FC's from every app and service imaginable. I again say OK EXTREMELY weird and decide its time to restore my backup from yesterday.
I reboot in recovery and what do I get greeted with? Unable to mount /sdcard! Long story short after scouring google for about an hour I find that if I do a fastboot oem lock/unlock I should get back up and running. Thankfully that works and I install the newest 7/31 CM9 nightly.
I wake up today without my phone alarm going off when it should. Weird huh? I go to open the clock and get a FC from the clock application. Reboot and it works just fine. OK weird again.
Go to work and leave my phone on the counter to help a customer. I come back to the desk and my phone is in recovery mode? Uhhh what? I reboot the phone and it says "encryption unsuccessful" and the phone needs to wipe data and reboot to continue use...
I decide WTF why not, not like I can use it. At this point I'm worried though. The phone reboots to recovery and I guess does a data wipe (takes 3-5 mins) and reboots. Now I am stuck on the CM9 bootscreen and won't go past.
I have some ideas as to get the phone (hopefully) back up and running. Just curious what this sounds like to anyone more knowledgeable then me (especially the part where it tried to encrypt my phone without me touching it!)
Any thoughts or help is appreciated!
Edit: I tried copying files to sdcard from recovery using mount usb storage. The files copy over and as soon as I leave the mount menu and go to install the zip files WHICH I SAW ON THE SDCARD they ARE NOT THERE anymore.
Edit2: It still lets me install the CM9 7/31 nightly which I had saved on the phone yesterday. Even after wiping everything and reinstalling the ROM I can't get past the CM9 bootscreen
Edit3: Tried fastboot, odin, nothing works. Even after odin I still get the CM9 boot screen. Pretty sure something is messed up to the point of I need a new phone. FML!

YESS!!!
YES I WANT ATTENTION.
I Have exactly the same. Mother of smartphones Somebody help us!
Its the internal Memory thats messed up yes, But Please somebody fix this Bullcrap. We don't have the knowledge but I will gladly donate to you who fixes it!
I just bought a brand new screen for my phone and I don't freaking want to buy a new Phone At the moment, So if you find a way to help us then let us know since that could be lifesaving right now.

Pretty sure I've given up. Everything I've tried has failed... looks like it might be gnex time.

NYYFan325 said:
Pretty sure I've given up. Everything I've tried has failed... looks like it might be gnex time.
Click to expand...
Click to collapse
Have you tried just going back to the stock rom/recovery/bootloader with the samsung application?

ronnygunz said:
Have you tried just going back to the stock rom/recovery/bootloader with the samsung application?
Click to expand...
Click to collapse
I would Love to get an link to that. if it helps us out i'd sh1t goldbricks. seriously.

Moonystorm said:
I would Love to get an link to that. if it helps us out i'd sh1t goldbricks. seriously.
Click to expand...
Click to collapse
I couldn't post the link because I have less than 10 posts here so I pm'd you. At least I hope I did. Let me know if you didn't get it.

Can you send me the PM as well. I know of the tool you are referring to but can't seem to find it anymore

NYYFan325 said:
Can you send me the PM as well. I know of the tool you are referring to but can't seem to find it anymore
Click to expand...
Click to collapse
I tried to send it, I hope it worked but it doesn't show up in my sent messages so I am in the dark.

Stock ROM. All the way back to Gingerbread.
http://forum.xda-developers.com/showthread.php?t=1572307

Well nothing officially works
The samsung simple dl tool just says "error" when I hit "start download" nearly immediately. Now I have no recovery or anything. Going to sprint right after I get out of work to get a gnex

NYYFan325 said:
Well nothing officially works
The samsung simple dl tool just says "error" when I hit "start download" nearly immediately. Now I have no recovery or anything. Going to sprint right after I get out of work to get a gnex
Click to expand...
Click to collapse
Ugh... I'm sorry people Who will get to our problem. Paid samsung services can Help. Nothing else. I be a smart guy and do like NYYFan here and get a galaxy nexus. thank You everyone for help. i set up 48hours for anybody to help me or i get a new device. Might sound rude but its a choice i made.
-Moon

I HAD THIS SAME EXACT PROBLEM
Temporary solution: heat the phone up with a hair blow dryer. get it hot but not so hot that it melts things. it will be able to boot up and work. I used this method so i could copy my sd card to my computer and wipe everything off
Permanent solution: turn your phone in for repair. there is no remedy to fixing this. apparently the circuit board or chip is bad and you can't fix it.
Luckily I had best buy black tie protection and I am waiting on my new replacement phone.

NicholasQ said:
I HAD THIS SAME EXACT PROBLEM
Temporary solution: heat the phone up with a hair blow dryer. get it hot but not so hot that it melts things. it will be able to boot up and work. I used this method so i could copy my sd card to my computer and wipe everything off
Permanent solution: turn your phone in for repair. there is no remedy to fixing this. apparently the circuit board or chip is bad and you can't fix it.
Luckily I had best buy black tie protection and I am waiting on my new replacement phone.
Click to expand...
Click to collapse
I work in a computer repair shop and going by that solution...sounds like a problem I may be able to repair using a similar method as some of the board-level repairs I do pretty often...anyone want to send me a dead lab rat? Lol
Sent from my Nexus S 4G using xda premium

Xaelius said:
I work in a computer repair shop and going by that solution...sounds like a problem I may be able to repair using a similar method as some of the board-level repairs I do pretty often...anyone want to send me a dead lab rat? Lol
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
You can have mine lol x) And Yep i fix computers for friends and so on their friends and this sounds like Nvidia was behind the chip... xD

It wouldn't matter who actually makes a chip if the heating it up is a temporary fix. That is a OEM issue. Basically think xbox360 rrod with the warped boards the solder melting/failing and the chips get loose etc.
Unless heating up failed flash storage temporarily makes it work. Which I doubt is the case but don't actually know. Brings back memories of putting failing HDD drives in the freezer though.

Well this is my official goodbye to the Nexus S forums (not like anyone cares haha). Just got my shiny new Galaxy Nexus. Have a great night everyone and happy modding!

NYYFan325 said:
Well this is my official goodbye to the Nexus S forums (not like anyone cares haha). Just got my shiny new Galaxy Nexus. Have a great night everyone and happy modding!
Click to expand...
Click to collapse
Ugh. Congraz. xD

Try Adam outler unbrickable mod for nexus s
Sent from my Nexus S 4G using xda premium

http://forum.xda-developers.com/showthread.php?t=1397393
Sent from my Nexus S 4G using xda premium

Unfortunately that is good only if software screwed up your phone. In my case and I'm sure others when it is hardware failure, that won't work :\

Sprint galaxy note 5 us

Hi guys. Ive been a long time subscriber and lover of these forums never really posted though. I need some help at the moment however, without sounding like an absolute complete noob. Here is my scenario... Bought a note 5 from my friend which he said wasnt working, noticed that some idiot (above mentioned friend im sure) tried to root it without knowing what they were doing jence tripping the bootloader and knox. I started playing around, with sprint sim and also with metro pcs sim inserted. At one point i got to the iot menu and i took a strp back and had to stop. Now i have never seen this menu even though i have been programming and coding since high school. Also, i am an avid drinker amongst other things and sometimes i will get so into coding or research and be surrounded by computers and tablets and phones all firing on different levels that i. Am not as focused on one particular thing enough. Sell this was one of those moments and after a quick overlook of what the menu had to offer i realized i should back off for the time being until i was sure. I did not use any dialer or #* or anything like that. My best guess is that it was something i did during the restart. Ive seen the pic if the menu im talking about online but no way to get to it. Someone help me out please. Im all about anonymity also so if you would like to contact me anonymously i can you can reach me on the bleeding eye site [email protected] or email me or even text me thank you.

Shut it off, then hold volume down, home, and power button to let it boot into odin mode/download mode. It will tell what type of phone it is, and u can flash the right stock from sammobile. And be sure to select the nand erase all option once your sure you got the right vsrision of the phone. Thats how my phone came back to life through many things, and after its back up you can try rooting again. I rooted via odin and thats how i installed my twrp also