[Q] Fuze screwed up - Touch Pro, Fuze General

I screwed my phone trying to change the theme. It powers up to the point where the top and bottom bars are visible, there is only the background wallpaper showing. The start menu is unavailable. I have tried hard reset with no success. I have tried to go through the forums but I can't find anything there that would help. I have been able to reach the tri colored screen but don't know what to do after the usb comes on the screen. BTW I have already updated the rom months ago.

What exactly were you trying to do that caused this problem?

Related

[HELP] Critical problem with diamond screen!

a couple of days ago i was flicking through pictures on my phone then the screen went all black with a few random flashes of white straight horizontal lines towards the top of the screen then it reset!
when i went home from work i thought it was the 6.5 rom.. i flashed another 1 and it wouldnt display anything on the screen so i pulled out the wire and i got an error message sayin it wasnt flashed properly or however that message goes... anyway so my phone shows the boot loader screen.. 'Upgrade Rom code error Please try again' flashed a couple of other roms and i know its on it jus doesnt show anything on the screen.. i plugged in my phone and used mymobiler which is an aplication 2 use the ppc using ur pc mouce and used this program 2 bypass the alignment screen.. http://goatechno.blogspot.com/2008/12/windows-mobile-stuck-at-screen.html
i then had random white flashes on my screen... bottom left lights are lit?
what do i do? is there a bad graphics driver or something?
please help!
im downloading stock rom now...
has any1 else encountered this problem?
flashed stock rom stock radio still the same prob.. does anyone know
i can only see the bootscreen

I think..I might've messed up my Captivate?

So, I installed the Evo4G statusbar found in the Themes section of the Captivate section, and it worked fine. But today, I decided I didn't want it, so I tried to install the stock one (Also found in the same thread), and it asked me to reboot. Once I did, it rebooted, but wouldn't go past the splash screen. Well, it did, but it stayed at a constant black screen. The bottom four buttons light up if I touch them, and it vibrates if I hit it enough. But the screen doesn't seem to work. At this point, I held the Menu/Home buttons (See if it did anything?) and Safe Mode came on the bottom left of the screen. I'm able to boot into the Recovery Menu, but none of the options do anything to help with my problem..
I really need my phone, and hopefully I didn't brick it. Any ideas?

Wierd Screen Issue

Hi,
I've flashed my phone (HTC Touch Pro) with Hardspl and then the latest Energy ROM.
Everything went perfectly and I was impressesd with how simple and easy it was and how much difference the ROM made to the phone.
Today, while using the camera, the screen went blank.
I tryed turning the phone off, pulling battery and a hard reset but its still the same.
Even after hard reset, the screen is blank but if i press the power button, on the second press, I get a flash of whats on the screen and then it goes blank again.
Should I try to reflash the phone again?
I've searched but not found the same issue
Thanks
The touch screen is still working and sometimes i can see the display, but its very dark and hard to read. Is the flex cable that needs changing?
Why would it stop working so suddenly?
Should i take it apart to reseat it?
Ok, I've found the same issue in a few other peoples phones but they seem to have beeen resolved by sendin the phone back under warantee.
I dont have that option unfortunatly so need to find a fix.
The only thing wrong with the phone is the screen backlight that suddenly failed
Can anyone help me or point me in the right direction please? I cant find a definite diagnosis anywhere
New Flex cable?
New Screen?
Pray?
Thanks
Back to stock SPL and stock ROM
Still no luck

[Q] HTC shadow 2 black screen issue

I bought an HTC shadow 2009 version off of ebay for $8 and it has a black screen issue. I can tell it boots up because although the screen is black, it flashes on and off as if it were changing boot animations, and then once it is booted the green led flashes like it has a text and the charging light is on, also i can get files off of it from my computer. So it shouldnt be a software issue, is what im thinking.. but i replaced the screen that it came with and it is still black. Does this sound like a software issue to anyone? Also when i try to hard reset the phone it goes through the original boot process it doesnt seem like it will allow me to hard reset it.. anyways all the searches i have done so far have suggested hard reset or replace screen. I have tried both and nothing has worked. Anyone have any suggestions?

Trying to Unbrick Nexus 7, stuck in Recovery Mode

Hi there,
I just bought the newest version of the Nexus 7 the other day, and decided I'd like to root it since I never bothered to with my old one. Big mistake. I followed what seemed like really simple instructions online, but after doing everything it said, my tablet is stuck in reboot mode. At first, it would show the Google symbol when I turned it on, with the little unlocked padlock at the bottom. Then it would show the circular colour symbol that would just keep moving -- no matter how long I left my tablet on it would just stay in this mode. Most things I've researched online so far just say "easy fix, go into fastboot mode and it will go back to normal". My problem is that sometimes it doesn't even let me see that screen, so I have to hold the power and volume button down several times in a row to see anything. Sometimes it will go straight to the Google symbol. When it finally did work, I pressed 'Recovery Mode' and the Google symbol appeared, this time without the padlock underneath it. Now it has switched from the circular colour symbol to the X colour symbol, but it still won't go past this. Also when I first reboot it, it shows the dead Android after the Google symbol, then a minute or so later the coloured X will appear.
Anyone know how to help? I've also read about restoring to factory settings and downloading all of these mirror images, but frankly I haven't found a solid 'how-to' yet. I am a Mac user so please only reply with someone I can fix with compatible software.
If anyone could help me this I would really appreciate it. I am stubborn and this will drive me nuts until I find a solution.

Categories

Resources