[Q] HTC touch P3452 stuck at booting. - General Questions and Answers

HI Masters,
I m a new user here,not much knowledge about Flashing etc.
I have a HTC P3452 phone which suddenly stoped responsing , i rebooted and it stuck at smart mobility screen.
I sent them for local repair shop, they did some flashing thing and still same.then they said its the hardware which is faulty.
After reading your threads i know its something to do with the ROM not the HW.
I tried few roms but there were erros like certificate is invalid etc. Then I
downloaded "RUU_Elfin_hTC_Asia_India_3.07.720.03_4.1.13.71_03.34.90_BLUE_Ship" extractred and then used boot loader mode to flash.
Copied RUU_signed.nbh to a SD card (4 GB) and started flashing.
Flash started , Goes to flash primary OS, then reading contents from SD screen then suddenly a White screen .nothing else. It just stuck at there for ever.
Please any help would be much appriciated.

Related

Palm Treo 750, stuck in bootloader ROM flashing not working

I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Hi mohaninusa2003, looks like your waiting for a reply since a while. Here you will find all the answers connected to your issue. Probably you did already but just incase have the link
http://forum.xda-developers.com/showthread.php?t=366771
Thanks hammod2k, I have tried all the suggestions on the thread. Still when flashing the original rom, it does not go beyond Bootloader -ok hans at GSM, left overnight for flashing, still not working.
Tried Mtty, set 14 0/ task 28 55aa /
Tried to flash Hard SPL, bit it is not successful, I am getting an error "Image file is corrupted".
I will keep searching threads and reading..in the meantime.
recovery tool
my friend where i can find the recovery tool? i been looking for it but nothing even on the palm suuport page? thanks in advance
regards from lima
mohaninusa2003 said:
I had to hard reset my palm, as it was stuck at windows screen. It had WM6.
Now it does not go beyond bootloader screen.
Tried, the following
1. Palm recovery tool, connection gets lost
2. Tried ROM flashing with the WM6 ROM (CHEEIMG.nbh) with 2GB Mini SD card with FAT 32 formatting, does not progress, it gets stuck no progress even after one hour.
Not sure what to do next, any help is greatly appreciated.
Click to expand...
Click to collapse
stuck on boot loader
hey mohaninusa2003..
I exactly have the same problem bro..it hangs up on gsm...i tried removing my card and hard resetting it but it just brings me to a tricolored screen red green and blue with the word serial at the bottom...tried soft reset but still the same thing..hope someone could help us on this
Hey fguimet,
Please follow the link and look at post 9 for the file,use the Desptop update method file and extract using winrar to get th file you are looking for. hope it helps,
http://forum.xda-developers.com/showthread.php?p=1714416
Sorry to bother but i have a few questions...i have a 750 treo and none of the support on this website is helping...i am trying to flash my palm 750 but its says the file is corrupted..what do i do about that? Progress only reaches 7% ive used cheetah and kaiser unlockers and i was also wondering if it can be flashed just using the computer and usb in booter mode since it wont go past the palm splash screen...i can access my treo using mtty but doing task 2a doesnt do anything either... I think that maybe my phone is screwed up. I appreciate any help you can offer.
I have almost the same problem with my Palm 750 that I believe locked to Rogers.
1. It hangs on GSM if I use SD card ROM file CHEEIMG.nbh . I have tried many different CHEEIMG.nbh files (ATT, Cingular, ROW…)
2. Running CheetahUnlocker will crush at 7%, and my Palm 750 will reboot and freeze at MS Mobile screen.
I have the same problem, and I think we have to change the IPL and after run cheatunlock.
How can we do it?
on my treo I have hard-spl'd but still i cant manage to flash a rom
My Bootloader screen results:
CHEE100
IPL - 0.20
CHEE100
SPL - 1.40.0liNex
______________________
it starts, gets to about 4-7% and then it says:
|00018003
|CHEEIMG.nbh - FAIL
|
|OS - Fail
|
|
|
|Update Terminate
|UPDATE FAIL
i have no idea what i am doing wrong
it all started when i tried to flash a wm 6.5 os and it didnt work... i was just randomly stuck on the bootloader screen
Swarford

Pls Help : Is my HTC Magic Bicked/Brocken? :(

Hello,
I rooted my phone :HTC magic(Vodafone) from 1.6 to 1.5 (successfully, I used it for 2 days)
I wanted to resore it to 1.6
When I tried to update it using HTC-Radio update "ota-radio-2_22_19_26I.zip" from HTC Website.
I could installed it,however when I restarted the phone it is stuck on Vodafone Splash screen.... Itried following things :
1) I created the goldcard again and tried to reboot it in to fastboot mode ,but phone is not entering in to boot screen and again Vodafone Splash screen appers.
2)I tried with Power+Trackball combination as well,but it only thing happening is :Blue LED glows and screen is completely blank.
3)I tried to detect the phone from my pc using adb devices , fastboot devices commands, but phone is not detected
Can anybody help me out of this?
Is my HTC Magic Bicked/Brocken?
if yes then , can somebody tell me where can I repair it in USA ( I am in Dulles/Sterling VA , USA)
PPPLLLLLLLSSSSSS Help me.....
Welcome to forums
Try reading Wiki here
Also enter to Sapphire section, perhaps you can solve your probs there before thinking on send to repair.
Good luck,
Hi Orb,
Thanks for the reply...appriciate it...
I seen the wiki , but I can not see the possibility to boot the phone in fastboot or recovery mode

[q] dopod c800 start-up failure

Guys, need urgent help with my DOPOD C800. I tried to upgarde its ROM and then was trying to intall WM6 on it.
However, I could only get to the stage of the ROM flash when the screen turned white and my phone went dead. Now the phone would not even switch on.
I am quite inexperienced with these PDAs and tried the reset button after looking it up on the net. That did not help either. Now i'm stuck with an expensive phone which won't even start up.
Please advice me about the further course of action.

[Q] Anyone recognize this logo

I have an AllWinner A10 based tablet that started working weird about a month ago - when the display was on there was no sound and to get the sound you had to turn off the display. I tried to fix it by flashing a custom ROM without understanding the process thoroughly. Long story short, I think I may have bricked it I believe the last thing I did was to install CWM-recovery-5.5.0.4.img through LiveSuit. Now I get only a blue Android logo at startup and nothing more. I have tried installing the stock ROM back but I always get this error in LiveSuit - ".PnpFelIn:invalid ID"
I am attaching a shot of the logo that comes up, hoping that some one will recognize what the logo means, and more importantly, if it's possible to recover my tablet from that point ?
Any pointers are very welcome at this stage.
Thanks
Hi
Any luck sorting this?
I have same error when using livesuit, and phoenixusbpro, ive got the natpc m009s with forgotten pincode, have got image file but can't install it, recovery mode just shows a dead android with red triangle,nothing else happens. Android Multi Tools v1.02b gsmforum gives an error of no files in the tablet so i can't use that either, tried .zip files on sd card too, nothing. tried 3 cables 2 computers with different operating systems.
Any help from anyone much appreciated.

[Q] Phone bricked, cannot flash any rom through KDZ as they stuck at boot logo

I had a massive problem with my phone suddenly as it stopped detecting the SD-card or SD-ext.
I was advised by someone on the XDA forum that to fix this I needed to ''use kdz to flash a stock rom to restore the system''.
And so I downloaded the KDZ tool, downloaded the earliest rom in kdz format that I could find online (version 2.1), and followed the process to install this using KDZ through my laptop.
However all this did was totally ruin my phone!! :'(
As now it wouldn't even start up, just showed a black screen saying Linux panic and arms 11 error.
I managed to find a rom called CM recovery rom, and when flashing one through KDZ tool it atleast doesn't show that error screen anymore,
however when trying to turn the phone on it just stops at the android boot logo and gets permanently stuck there.
My goal is to get back to the rom i was on before the phone broke (CM 4.2.1),
AND,
to have the SD-card and SD-ext both being detected and working correctly.
However currently the phone wont even turn on!! :'(
Please can someone help me by telling me exactly how to fix this please??

Categories

Resources