Hi everyone...i have a problem after flashing to HSPL and need help. My original SPL was SPL 1.42.0000.
My other device information are:
OS 5.2.21869.5.0.83
Manila ver 2.5.19211619.0
ROM ver 1.66.707.1 (76641) WWE
Radio ver 2.07.51.22_2
Protocol ver 15.32.50.07U
Before, i use several Touch X apps installed to my device and i did back up all data by using PIM back up. During process of the flashing, once came up popup text on my PC sceen saying that "critical error...etc" then i closed the popoup text..and i continued by choosing 2.08. so then the process done. and i received the message "we hack it" and "succesfully...". I checked the new SPL of my device, and it says:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
After that, i restore all data from PIM backup. everything looks Okay. But then, i often received several messages from microsoft saying:
--> the problem occured with facebook, pls report back to microsoft (something like that). I did uninstalled the facebook and re installed back...but same problem.
--> Also, i received the same text saying that i have problem with manilla.exe.
--> and the reminder led is keep blinking unless u pull out the battere.
It looks like the system has messed up after i flashed to HSPL (i still use the original ROM version dan Radio version as above mentioned). I have read the instruction well. Saying that the flashing should be OK for device with 512MB of flash size and the SPL 1.42.0000.
Can anyone please held me with this. Really appreaciate your help. Thank you. My regard, Yonz.
Related
Please help. I wqas trying to update my radio rom to 1.13 but the error 114 appeared and asked me to disconnect my imate jam and do a soft reset. I did that but its stuck with blank screen that shows SERIAL ta the top of the screen and V1.02 at the bottom. I tried removing the battery and replacing it back but it still shows the black screen.. now im stuck please help...
Have you tried hard resetting at the bootloader screen (this is the SERIAL
screen)
Hard reset is:
__ + __ + Reset button
hi
i tried hard resetting but it didnt make any difference.. now i nearly had a heart attack... what i did was reconnected my imate to my pc and ran the rom update again... to my surprise it did the update then asked me to hard reset... thats it my radio version in now updated... now im going to observe its behaviour first before installing everything again...
cheers
Good to hear, looks like everything went fine.
What ROM are you using? Just curious
Jorgee said:
Good to hear, looks like everything went fine.
What ROM are you using? Just curious
Click to expand...
Click to collapse
hi its:
Rom Version 1.12.00WWE
Rom Date May 28, 2005
Radio Version 1.12.10
Protocol Version 1337.42
ExtRom Version 1.12.171WWE
now im reverting back to the original rom version then ill update the radio version with 1.13 just in case i made a bad patch cos of disconnecting it during update.. :lol:
ayos to!
It looks like you are using a very old rom, BTW, the newest RADIO is 1.04.10....
Do you have a Vodafone v1640?
no i am using imate new jam. imate says it has the latest rom version.
Oh, sorry i thought it was a Universal....
Well hope everything is now okay
I was atempting to upgrade ROM in to the "L26 WM6 PRO Business V7 Videocall 2" ver and everything went well, but there were problem with phone calls, quality of sound during conversation exaclly, so that i was trying to update radio to 1.17 ver, and something goes wrong right now my exec don't want to turn on and he hang on the 1 splashscreen with radio ver and ver of soft,
i tryied to fixe it by downgrade rdio to 0.00 and update rom again in to the 1.15 ver included in L26 rom, but nothing has happend still the same problem
who could possibly know what had happedn with my exec, one guy on polish side said that ther is some kind of " mamaich method" to fix or check damages which I had made
Could anyone help me, I'm looking for any solution for this matter ??
Are you still able to get into bootloader?
If so, flash back your full original ROM (M$ + Radio + Ext).
hi
yes i'm still able to do it, but would u mind to give me direct link to the rom which should be installed,( one seriouse mistake it's enough for me)
Hi,
I know the subject is common but none of what I found matched my precise problem :
I flashed Nothrills v3 FRA, success, but I in two phases (progress until 19%, freeze, ERR 262, again : ok).
Then I wanted to upgrade the radio rom : no way. ERR 262 whatever I do :
- retried 3 times
- rebooted PC (XP)
- reinstalled ActiveSync
- reflashed HardSPL (3.28)
- even tried with SD card : FAT32 + KAISIMG.nbh, got 3 colors + SERIAL and nothing happened
Now I cannot even flash the splashscreen : 262
It's not catastrophic, my Kaiser works ok, but I feel stuck, no good feeling, even with this nice ROM.
Any idea ?
Cheers,
LPG
elpeygey said:
Hi,
I know the subject is common but none of what I found matched my precise problem :
I flashed Nothrills v3 FRA, success, but I in two phases (progress until 19%, freeze, ERR 262, again : ok).
Then I wanted to upgrade the radio rom : no way. ERR 262 whatever I do :
- retried 3 times
- rebooted PC (XP)
- reinstalled ActiveSync
- reflashed HardSPL (3.28)
- even tried with SD card : FAT32 + KAISIMG.nbh, got 3 colors + SERIAL and nothing happened
Now I cannot even flash the splashscreen : 262
It's not catastrophic, my Kaiser works ok, but I feel stuck, no good feeling, even with this nice ROM.
Any idea ?
Cheers,
LPG
Click to expand...
Click to collapse
Have you tried other roms and HardSPLs, Check your bootloader(tricolour)screen to make sure HardSPL has flashed. i had a similar issue that was solved using jump spl 1.56 before HardSPL Flash.
do you have any startup applications?
some applications may cause this error
i used to have it when i was having battery status running
try hard reset
then perform whatever you want to do
elpeygey said:
Hi,
I know the subject is common but none of what I found matched my precise problem :
I flashed Nothrills v3 FRA, success, but I in two phases (progress until 19%, freeze, ERR 262, again : ok).
Then I wanted to upgrade the radio rom : no way. ERR 262 whatever I do :
- retried 3 times
- rebooted PC (XP)
- reinstalled ActiveSync
- reflashed HardSPL (3.28)
- even tried with SD card : FAT32 + KAISIMG.nbh, got 3 colors + SERIAL and nothing happened
Now I cannot even flash the splashscreen : 262
It's not catastrophic, my Kaiser works ok, but I feel stuck, no good feeling, even with this nice ROM.
Any idea ?
Cheers,
LPG
Click to expand...
Click to collapse
yardie.spike said:
Have you tried other roms and HardSPLs, Check your bootloader(tricolour)screen to make sure HardSPL has flashed. i had a similar issue that was solved using jump spl 1.56 before HardSPL Flash.
Click to expand...
Click to collapse
Yes, it (bootloader) showed hardSPL 3.28 and I'm already using jump 1.56.
Concerning hardSPL I'm using 3.28 since it (nothrills) is a 6.1 based on a HTC ROM (3.29 is for ATT, no ?), which one do you think I should try ?
Flash history :
received with orange 6.0
new orange 6.1
new HTC 6.1
Nothrills 6.1 V3
then stuck : here comes the 262
So I can't try any other ROM, for the moment
LPG
jahrami said:
do you have any startup applications?
some applications may cause this error
i used to have it when i was having battery status running
try hard reset
then perform whatever you want to do
Click to expand...
Click to collapse
Thanks for the idea, I'll try to withdraw anything that starts after boot, and then if no progress : backup and hard reset.
LPG
Now I think I tried it all
jahrami said:
do you have any startup applications?
some applications may cause this error
i used to have it when i was having battery status running
try hard reset
then perform whatever you want to do
Click to expand...
Click to collapse
I tried hard reset : RUU still stays at 0%, and then "262" ...
I suppose I'll have to give up, since I really have no other idea what to try...
LPG
Back on air, oops I meant flashing !
I just wanted to let the forum know it as it might interest someone in the same situation :
I got free from NoThrills ROM (no offense Master cook ) by reflashing the new orange official ROM (I had set the pagepool to 32mo), everything went right.
Then I upgraded Radio ROM to 1.65.24.36 without any problem. I suppose I won't have any issue with other ROMs
Cheers
LPG
Hey Guys,
I set my Polaris back to Original ROM (WM6.0)[GERAMN] (http://forum.xda-developers.com/archive/index.php/t-379796.html) everything worked, but then I noticed that the polaris goes in "stand-by-mode" and the screen is black. Normally I push the on/off-button to turn on the display but this doesn't work any more. Also the buttons arn't working... Only a Soft-Reset helps...
Can anybody help me?
thx
I had it too. Do you have the latest radio rom installed?
1.59.42.15? My device does it with that radio.
NeoS2007 said:
I had it too. Do you have the latest radio rom installed?
1.59.42.15? My device does it with that radio.
Click to expand...
Click to collapse
My Radio-ROM is: 1.58.21.23
ROM-VERSION: 1.25.407.1 GER
Do you have a Step-by-Step instruction how to reflash everything back to the original GERMAN ROM (also SPL-SCREEN), because of the warrenty?!
SPL-SCREEN shows:
POLA100 MFG
SPL-2.20.OliNEx
CPLD-2
i have solved the probelm.
i installed a RADIO: 1.58.26.20
but the reception (GSM) is very bad...
any help?
I had this problem, sent phone back to O2, if you find out what radio gives a good signal I would be very interested, as you can read from my thread I have lost signal all together since receiving phone back
I have sort of the same problem, my polaris is in Spanish.
I figured out that the problem was in the usb connection.
Its very rare, but it works.
I have to use the phone with the checkbox of the "enable advanced network funcions" checked. That is in Settings, connections, usb to pc (or something like that, again, my phone is in spanish)...
If i uncheck that, when the phone enters in the sleep state, it hangs and never wakes up.
I hope this is usefull.
Chears.
Multiple Errors...
Hey Guys!
I use the XDA Orbit2 (polaris) with the 1.64.08.21 Radio and the latest german udK ROM.
The Screenerror disappears after flashing the udK ROM and the bad Radio with flashing the 1.64.08.21.
The screen thing is in my oppinion only an O2 error, and the radio thing is an HTC bug.
So try to flash and be happy!
But read the "HOWTO to HARDSPL" your device and "HOWTO FLASH"!!
Without you could brick your device!!
So far
Frank
e.g. everything you do with your device is on your on risk!!!
Can anyone help me find an update for my HD2 s/n xxxxxxx. Recently I did installed Rom Version 3.14.707.3 (04666) WWE from the official HTC website but I am having issues when viewing pictures from the home screen. At times the album does not open and gives error. I tried to reinstall the ROM again but the problem persists.
Can anybody help me!!!
Thanks in Advance.
[email protected] said:
Can anyone help me find an update for my HD2 s/n xxxxxxxxx. Recently I did installed Rom Version 3.14.707.3 (04666) WWE from the official HTC website but I am having issues when viewing pictures from the home screen. At times the album does not open and gives error. I tried to reinstall the ROM again but the problem persists.
Can anybody help me!!!
Thanks in Advance.
Click to expand...
Click to collapse
Hey there, firstly ive removed your s/n, it really isnt a good idea to be advertising that publicly
To clarify, you have flashed a stock rom. You say your having problems looking at pictures from the home screen via albums.
Where are the photos stored, device or sd card? Maybe your card is giving you grief as i doubt the same problem would persist after reflashing.
HI.
Thanks for the reply. Well the photos are stored on the memory card. I have now formatted the memory card and have updated an old rom 1.66.707.1 (76641) WWE. This rom is working fine. Now should I continue with this or install 3.14.707.3 (04666) WWE.
Thanks in Advance
[email protected] said:
HI.
Thanks for the reply. Well the photos are stored on the memory card. I have now formatted the memory card and have updated an old rom 1.66.707.1 (76641) WWE. This rom is working fine. Now should I continue with this or install 3.14.707.3 (04666) WWE.
Thanks in Advance
Click to expand...
Click to collapse
Hey there,
Well the choice is your really, but the 3.14 stock rom did have some useful updates so i would always recommend using the latest stock. Also if you want to run droid from your sd card, the 3.14 stock rom and radio are required.
Cheers.
manila.exe error
Thanks for your reply. I have flashed the 3.14 ROM however I am getting this manila.exe error if I try to launch the album from htc sense. I thought it was due to Cookie's Home Tab which I uninstalled but the problem persists.
If I use windows default theme there is no problem.
Can you guide me solve this error.
p.s. I tried to solve the error by reflashing but it won't help!!!
Please advise.
Thanks in Advance.
[email protected] said:
Thanks for your reply. I have flashed the 3.14 ROM however I am getting this manila.exe error if I try to launch the album from htc sense. I thought it was due to Cookie's Home Tab which I uninstalled but the problem persists.
If I use windows default theme there is no problem.
Can you guide me solve this error.
p.s. I tried to solve the error by reflashing but it won't help!!!
Please advise.
Thanks in Advance.
Click to expand...
Click to collapse
You still get the error after re-flashing?? What programs, cabs did you install after flash?
I have installed cookie's home tab version 2 with cht editor, opera 10, bsb tweaks, godswmobile pocket call blocker, htcaddicts clean ram, johncos endkey - actionscreen, lifeware solutions deluxemoon, palringo, panoramic freecell, rarlab pocket rar, bnm7 manila sense 2.5 colored icons and google maps.
Thanks in Advance.
hi everybody on this thread: this is my 1st post on this forum.
I am having issues with my HTC HD2 - T mobile.
here is what I did: I flashed my rom to android froyo 2.2.1 then I had small issues with the phone and tried to upgrade to android gingerbread. then I did lot of things like formatting sd card, trying to upgrade rom, radio, clockworkmode - all in vain.
long story short: the only thing I can see on my phone when I turn my phone ON with volume button pressed, is the red, green, blue & white screen with the following text:
PB81120 HX-B3
SOL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0X40
Serial
I am able to establish USB connection as it says "USB" in place of "Serial" but unable to do anything else as when I tried updating rom, it says the readme.txt is missing, same error while installing clockworkmod recovery, I even tried to install T-mobile's original win 6.5 rom but the utility runs for a while and does nothing with an error saying "couldn't update the rom" and asks me to recover my phone.
now what are my options, to get the phone working on any rom, though I eventually want to install gingerbread. Any help would be highly appreciated. and thanks in advance.
Hi, I've also recently upgraded to this new ROM. The only issue I have is that the fb picture is not loaded to my contact list. I was able to with the ROM that came installed with it. I am able to get facebook profile updates though.
Any help I get is much appreciated.
Wingloo said:
Hi, I've also recently upgraded to this new ROM. The only issue I have is that the fb picture is not loaded to my contact list. I was able to with the ROM that came installed with it. I am able to get facebook profile updates though.
Any help I get is much appreciated.
Click to expand...
Click to collapse
Hey there,
What rom are you using? Give me a link, is it android (ICS)?
Hi,
Rom Version 3.14.707.3 (04666) WWE from the official HTC website for Win Mo6.5
you can buy a sensation.