Anybody know why I would be getting the jigsaw unlock after turning the screen back on when I have unread SMS? ( I use nolock )
Its to remind you that you didnt read your UNREAD sms. READ IT.
you will also get a puzzle piece for a missed call...
It might be a separate program from the normal lock screen that nolock doesn't know about.
Question, and this is slightly off topic, but iv rooted using unleash the beast and i use adw launcher for a homescreen. The phone wont go into sleep mode unless i press the button. my screen timeout is 30 seconds. This is very annoying as when i get message, if i dont check it immediately and hit the button, the display(by staying on) eats my battery...this might be something menial, but im a noob, so any help or advice would be appreciated.
Related
Hello,
Yes, I searched everywhere but didn't find any answer.
Is it possible to disable the backlight when notifications comes ? For example, when a SMS or an e-mail arrives, the screen powers up and my pocket presses the screen and do bad things on the screen. This would be a cleaner idea than locking the screen!
I know that phoneAlarm have an option for this but I'm using PhoneWeaver for this profiling job (which is smaller than it). I think it must be a reg key somewhere for this :/
Thanks in advance for your precious help!
To be honest, I do not understand you question but I think you are searching for the sound and alert settings?
Go to start > settings > sound and alerts (and then the 2nd tab)
If this is not what you are looking for, could you be more specific?
he want it to when it turns on because of an alarm or sms or the likes that it
dont have backlight on the lcd
personaly i doubt it's possible i believe that when notifications turn the device on it's 100% the same thing that is sendt to the os as when one press the on button if that is the case that the os cant tell the diff
i doubt it could have different backlight settings depending one
what turns it on
holding the button down for a bit turn off the backlight on many devices
untill the button is pressed for a bit again
also when it's turned off so when the notification turns it on the backlight will be off
but ofcause so will it when power button turns it on
I would like my device (TyTN/Hermes) under windows mobile 6 not to "turn on" when a message arrives because my phone case press on the screen while on my pocket and some strange things arrives (delete messages, surf on the Internet, ...) as random parts and buttons are pressed...
I was hoping this simple thing could have been done easily
slide2unlock
I was wanting the same thing also since I carry my phone in my pocket(htc mogul). As I would reach into my pocket to pull out the phone I would end up pressing button to where programs would open and what not. I tried slide2unlock and I think that has solved my problem pretty good. The only time the phone get unlocked is with an incoming call. Other than that the screen just turns on with an incoming text. Good thing about this program is that if you turn on your screen, the buttons won't do anything without sliding the slider to unlock.
if a password is set it dont go to the today screen and random screen pokes will not result in wild pr0n surfing
or getting a case with s screen in front like the silicon ones or the
full plastic ones will safe the screen from clicks and damage too
I am also looking for a solution. I am currently using slide2unlock, but I would prefer the behavior mentioned above. Specifically, I would like the phone to stay in standby mode (screen off, not responding to button presses or screen taps) when an incoming SMS arrives or phone acquires or loses signal. Currently these behaviors will turn on the phone by itself.
I recently updated to Shamanix 1.3 (aka Schap's 4.01 customized) which has this behaviour
The phone don't turn on when an e-mail/sms/mms arrives (only when a phone call arrives)
Anyone has found the solution for this?
Thanks!
GM.
Hi all,
After a phone call i often see that a lot of programms has been launched accidentally due to the contact between my ear and the touch screen.
does anyone have a tip to automatically lock the touch screen during a phone call ?
benjb said:
Hi all,
After a phone call i often see that a lot of programms has been launched accidentally due to the contact between my ear and the touch screen.
does anyone have a tip to automatically lock the touch screen during a phone call ?
Click to expand...
Click to collapse
Lol, my ear once accepted another incoming call from this girl that I was avoiding for ages... and I didn't even realise I was talking to her, thought it was my other mate.
MrSmith22 said:
Lol, my ear once accepted another incoming call from this girl that I was avoiding for ages... and I didn't even realise I was talking to her, thought it was my other mate.
Click to expand...
Click to collapse
Ouch!
If i'm not wrong, S2U2 can turn display off during a call. Great software!
I've tried two progs more: PhoneScreenLock and InesoftAddressBook.
Inesoft provide many features including display switch off during a call.
Phonescreenlock keep the display on showing info about the call, locking the screen.. but with long conversation you may frie your ear
Bye
KK
Any updates on this one please? I have the same problem with running gazillion apps on my Polaris with my ear in call as benjb did.
Tried PhoneScreenLock - did not work well for me because its buggy (the lock screen pretty often appears somewhere BELOW the in-call buttons or start menu and needs to be switched to via closing in-call screen, which obviously renders it useless).
The InesoftAddressBook is not an option either, cause I already have other address book app and would like to stick with it (BTW my current address book has "slide-to-pick-up-call" feature, which makes me afraid that it would conflict with S2U2).
Sadly the Polaris doesn't have motion or light sensor... It would make my life sooooo easier with ZuinigeRijder's TouchLockPro...
So any ideas on what else I could use please? Thanks!
two things...
1) Are you aware that after you answer/make a call but before you put the phone up to your ear you can press the power button (not press & hold, just press & release) which will turn off the display, but not disconnect your call (or, turn off your phone)? No stray on-screen button pushing this way! With the screen off the "end call/hang up" button still functions and when you press it the screen will come back on immediately. If you need to access your address book or make a note etc during a call, press & release the power button and it will turn the screen back on and not effect your call in any way. If your phone is set up like mine and it returns to the home screen each time the screen is turned on, then simply press the green phone button and the dialer comes back to the top.
2) If #1 doesn't do it for you and you need software to accomplish this, then search this forum for MissedCallReminder (just like that - no spaces). Besides having an option to "lock screen on connect" it has a very handy feature (the main feature actually, as the name indicates) of being able to set up repeat reminders for missed calls and missed sms messages. Very handy. It can be setup to run automatically at startup so you don't have to remember to start it up manually. It also automatically unlocks the screen when you end your call.
Turned out I had bookmarked the app, so here's a link:
http://forum.xda-developers.com/showthread.php?t=441593
Hi!
I have a major problem with Pro. Had it for week and already I have missed many calls. Well, technically I've answered them :-(
The problem is that when a call comes in, the touch screen activates and if the phone is in pocket, it will very likely answer the call. It has done this many times and it does it so fast that the vibrating alarm doesn't even vibrate once. So I have no idea that somebody is listening to me in my pocket!
No, the button lock, doesn't seem to help here. Try it. Even with button lock on, you can answer the incoming calls with touch screen.
So what to do? I am really lost with this. Do I need to power off the phone completely when I'm on the road and only power it on when it's on the table? Yes, that works... and yes, it would be ridiculous.
One solution could be that when an incoming call is coming, one would need to enable the touch screen by pressing one of the hardware keys. And the call could be answered with the hardware keys also. After all, they do not press down easily in the pocket. But there is no way to set the phone this way AFAIK.
So, please guys help! (Google didn't help although Diamond users must have the same problem.)
I have the same problem!!! Didn't figured out a way to solve it by my own. It's realy annoying, especially if you do not want to answer at all to the person that is calling.
please, did anyone find a solution to this issue?
someone tried this and seem to work.
http://forum.xda-developers.com/showpost.php?p=2551522&postcount=124\
I would like to try it without changing the dialier
Source link is here
http://forums.whirlpool.net.au/forum-replies.cfm?t=988590&p=14#r263
Think a little app is required that blocks off touch screen as incoming call arrives.
Same problem on the Diamond :
http://forum.xda-developers.com/showthread.php?t=414731
I have tested the technique exposed by Carloshdez with CSDEVCTRL 3.28 and it works on the TP:
http://forum.xda-developers.com/showpost.php?p=2590105&postcount=188
I Followed his configuration, but entered "0" at the top for "Lock if Idle for Sec"
When the phone rings, CSDEVCTRL deactivate the screen but keep the hard keys activated.
Very complicated solutions it seems... I do not like to replace the dialler for instance. Hmmm.
Any solution where it would be possible to "open" the touch screen before doing anything to the call. I mean, it needs to behave so that
- the screen activates and you can see who is calling
- the touch screen is inactivate so that you do not accidentally answer it
- you can "open" the touch screen to
* answer
* hang-up
* mute
* i.e. all things that are now possible
This is because the hardware buttons do not give you all options, like mute and send text.
Hate to say, but iPhone style (or should I rather say Androind style) "slide to unlock" might be it as it's not that probably thing to happen in pocket. Are there such programs? And what do they do otherwise (that I probably do not want )?
With the solution I exposed, the screen is turned on but locked when a call comes in.
When you hangup with the hard key, everything (including mute, etc) is unlocked so you can use your TP as you were before.
Or you can use S2U2. With it, you have a "Slide to unlock" and "Slide to answer" Iphone's style button.
What happens if the other party was the one to end the call (you did not end the call by pressing the end key), will it still unlock the screen or what?
dmsr66 said:
With the solution I exposed, the screen is turned on but locked when a call comes in.
When you hangup with the hard key, everything (including mute, etc) is unlocked so you can use your TP as you were before.
Or you can use S2U2. With it, you have a "Slide to unlock" and "Slide to answer" Iphone's style button.
Click to expand...
Click to collapse
dmsr66 said:
With the solution I exposed, the screen is turned on but locked when a call comes in.
When you hangup with the hard key, everything (including mute, etc) is unlocked so you can use your TP as you were before.
Or you can use S2U2. With it, you have a "Slide to unlock" and "Slide to answer" Iphone's style button.
Click to expand...
Click to collapse
You didn't get the mute part... I frequently want to mute the ringing WITHOUT answering or hanging up the call. Excellent feature BTW! Usually just to walk away from the current situation to quiet place to answer the call. Yes, I know I can do that with turning the phone upside down also, but there is also the text message option that I'm learning to use also.
I guess I need to try S2U2 then.
http://forum.xda-developers.com/showthread.php?t=422871
try this over S2U2!
Hm... turning my phone around before I can answer a call seems to me a little silly.
A simpel application would be more usefull.
fireblade63 said:
What happens if the other party was the one to end the call (you did not end the call by pressing the end key), will it still unlock the screen or what?
Click to expand...
Click to collapse
If the other party ends the call, the phone unlock. Actually it is only lock during "ringing"
paulyluca said:
Hm... turning my phone around before I can answer a call seems to me a little silly.
A simpel application would be more usefull.
Click to expand...
Click to collapse
I agree! Seems like an excellent idea, but the turning part seems complicated (risc dropping the phone, use 2 hands...?). I rather have something that can be done just by thumb of one hand.
(No, haven't had the possibility to try either one yet.)
The whole sensor thing is turning into a carnival, hopefully some real useful apps will be made using it.
EnOleEikka said:
I agree! Seems like an excellent idea, but the turning part seems complicated (risc dropping the phone, use 2 hands...?). I rather have something that can be done just by thumb of one hand.
(No, haven't had the possibility to try either one yet.)
Click to expand...
Click to collapse
I would apreciate a application that locks the phones touch screen while it rings and unlocks it after you answer (so that you can use it during the call).
Can't make this application, i'm not that smart, but maybe someone els can?
LE: I think this thread should be made "Sticky" until we find a solution, because we have here a real issue!!!
I am going to attempt to DEV an app like that, but I am sure one of the Senior's could dev this much quicker
I know it sounds like a silly solution and I agree that this is a serious design bug but a simple way to avoid this problem is to keep the phone in its pouch....
anonimo said:
I know it sounds like a silly solution and I agree that this is a serious design bug but a simple way to avoid this problem is to keep the phone in its pouch....
Click to expand...
Click to collapse
And that is how I've also answered and ended a call before I've slid the phone out of the pouch since the pouch is quite tight and activates the screen...
Need some other option on screen, like S2U, to 'unlock' the normal phone app' touch options first.
anonimo said:
I know it sounds like a silly solution and I agree that this is a serious design bug but a simple way to avoid this problem is to keep the phone in its pouch....
Click to expand...
Click to collapse
It IS in his Pouch, and both in my pocket, but it answers itself the calls!!!!
The app should use the side bottons to MUTE the call.
I know the title sound complicated but i don't think the idea is. I either saw this in a dream or in another forum and haven't been able to find it again. Anyways my idea is pretty simple:
When the phone is turned up to it's proper position as if your holding it in your hand (the screen is facing up) the phone automatically unlocks it self without the need to press the damn menu button twice or do a silly pattern. When you put it down on a surface, you put it screen down and then when you pick it up and turn it over, it wakes up easy as that. If the phone is facedown and rings it wakes up. And you want the parameters of the phone tilt to be strict enough the phone won't wake up when it's in your pocket. Also, when you put it facedown, the phone will go to sleep.
I sadly don't know if you can overwrite the unlock of the phone (that has no pattern lock) nor do i have the porgraming skills to do this. If it's not possible to bypass the lock screen with a program, maybe u could emulate the menu button being pressed twice? Just my idea. If there is something like this out there already, just post the link. Thank you!
This app already exists. You can download it in the Market. Unfortunately I can't remember the name...it was one of the first apps I installed on my phone.
OK--I looked it up, and the app I was thinking of is not what you asked for. The app is Ring Control, which focuses on controlling the ringer based on position.
However, it uses the same inputs that yours would, so maybe you should contact the programmer? He has a long post about the programming of it here, and it doesn't seem to far from what you want:
http://fognl.blogspot.com/2008/11/android-ring-control.html
Bump!!! come on guys...make this happen.
Whats up guys
Just got this phone this week and there's been something really annoying me. When I go to reply to a text or compose a new one, if I slide the screen right after clicking that button that stupid button screen comes up screws up the text. Do you really have to wait until the messages are on the screen to rotate? Or is there a way around it?
Thanks
Joe
Synned said:
Whats up guys
Just got this phone this week and there's been something really annoying me. When I go to reply to a text or compose a new one, if I slide the screen right after clicking that button that stupid button screen comes up screws up the text. Do you really have to wait until the messages are on the screen to rotate? Or is there a way around it?
Thanks
Joe
Click to expand...
Click to collapse
I find that with my pro and my other wm devices that I need to be kind of methodical and go thru the process to get where I want to be. If I try to speed things up I frequently end up with freeze ups amd slow downs anyway. Sometimes another rom can help with these types of issues. My .02