I am having problems with the way I store phones and the caller id correctly identifying it.
If for example the phone number is 99887788, that is the way I store it. But when the call comes in, it comes with a plus sign and three digit prefix, for example +12399887788.
So, I HAVE to store the number with the prefix to get the caller ID to work, which I don't want. I had this problem with a VERY VERY old phone once, but never with the new ones. I have a friend who has an older version HTC and he doesn't have that problem.
Would you please help me fix this?
No idea what would be causing it, but as a suggested work around until you do solve it, store the number as you want it but then store the number as caller id shows it in another phone number area (Mobile2?).
Related
Hi
I have a question, I have a HTC S710 running WM6. When I get an SMS
instead of showing the name of the person that sent it, it shows the
number even I have the contact stored. What I figured is that the
stored number is XXX-XXXX and the SMS comes from +506 XXXXXXX.
In other phones Ive had (Nokia, Sony Ericsson) when an SMS comes from
that number, it does associate it with the contact name.
Any ideas on how to get this done on the HTC S710?
Thanks in advance,
Dan
I don't see anything else than modify the whole phonebook and put +506 (or a needed one) at the beginning of all your numbers. Maybe all your phones were able to display correct number, but I'm afraid that WM can't do it
Nokia only compares the last 7 digits from the right.
I think it's also depends on the network you are connected to.
that's what someone told me anyway so don't take my word from it... here we don't have that problem (even if the number is sored without +972 it still show the name of the contact when SMS arrives).
So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.
hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.
i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.
Wow, it worked!!
Thanks a lot man!
thanks for the tip jason_ma!
i was also wondering about it.
Anyone know how to edit CalIidMatch an an HTC hero
Hi Guys, i am all new to android and everything and i am liking the change so far only one problem i have is that i cant find the caller id section on my phone that let you show your id to contact only but other number is comes up private, it was very useful for me when i am working and i have to call a random number but i dont want them to have my phone number.
i had 2.3.3 same nothing there, so i have upgraded 2.3.4 still nothing only thing i have is Network default, Hide number, show number, but no contact only.
Need some Help developers...
darkwildchild79 said:
Hi Guys, i am all new to android and everything and i am liking the change so far only one problem i have is that i cant find the caller id section on my phone that let you show your id to contact only but other number is comes up private, it was very useful for me when i am working and i have to call a random number but i dont want them to have my phone number.
i had 2.3.3 same nothing there, so i have upgraded 2.3.4 still nothing only thing i have is Network default, Hide number, show number, but no contact only.
Need some Help developers...
Click to expand...
Click to collapse
there are varoius apps u can use... or u can just type #31# before the phone number this has the same effect ( some service providers charge you for this service i don't know how much but it isn't alot) for example #31#8179834598 and they will see private on their phone
okay you said various apps, can you recommend any?? as i more interested in apps, like with the wm6.5 in was built into the rom as standard.
Hi folks,
I am trying to figure out the best way to store numbers in the phone app.
I usually store the number as 01234567890 with the leading zero so that I can call the number from anywhere in the country.
The network operator sometimes sends the caller ID as +11234567890 which is the international format. Windows phone fails to match this with the contact in my phonebook. I want it to match only the last ten digits of the number. My old dumbphone was doing this straight out of the box.
Am I missing something or does the Windows Phone 7 phone app just not support this?
Best Regards,
Gowtham
If you're in the US (I assume so, since you have country code of 1) then you might as well just store the number with the leading 1 (or +1 if it's really needed, but it shouldn't be). I have some number stored without the area code, some with area code but no country code, and some with both, and it seems to work out. A leading 0 is probably confusing the phone though.
I am based out of India at the moment. It is standard procedure to put in a 0 to call mobile phones located in a different state in our country.
After a soft reset and sync, my phone seems to function properly for now.
I'll post updates if I discover anything else.
Hi,
I bought a T-Mobile HTC 8X in the US, unlocked it and brought it back with me to Israel. Now, when Israeli contacts call me, their numbers appear as (for example) 050 555 5555. When they text me, the number shows up as +97250 555 5555. For some reason the phone isn't able to tell that those two are the same number. I couldn't find anything while looking through the settings. I tried playing around with regions and all and came up with nothing. My old AT&T Focus had no issues and my dad's British 8S is working fine as well.
If I remember correctly, In WP7 deivces there's a registry setting which allows to control how many digits from the right identify the number as unique. However, I couldn't find a registry editor for the 8X (is there any?) so that information won't help me right now.
So now, my caller ID function sucks and the only way to actually ID contacts is to save 2 numbers for each one... really frustrating.
Does anyone know how to fix this?
Thanks!
Eyal
HTC support emailed back
And after sending them my IMEI they said that unfortunately there's nothing they can do and T-Mobile phones show that symptom in places like Israel and Europe.
So, it's either selling it on ebay or waiting for a registry editor or flashing it with a new ROM somehow. Option #1 seems like the most realistic one at the moment. This really sux.
Eyal
eyal453 said:
Hi,
I bought a T-Mobile HTC 8X in the US, unlocked it and brought it back with me to Israel. Now, when Israeli contacts call me, their numbers appear as (for example) 050 555 5555. When they text me, the number shows up as +97250 555 5555. For some reason the phone isn't able to tell that those two are the same number. I couldn't find anything while looking through the settings. I tried playing around with regions and all and came up with nothing. My old AT&T Focus had no issues and my dad's British 8S is working fine as well.
If I remember correctly, In WP7 deivces there's a registry setting which allows to control how many digits from the right identify the number as unique. However, I couldn't find a registry editor for the 8X (is there any?) so that information won't help me right now.
So now, my caller ID function sucks and the only way to actually ID contacts is to save 2 numbers for each one... really frustrating.
Does anyone know how to fix this?
Thanks!
Eyal
Click to expand...
Click to collapse
Actually, if I remember correctly from my previous experience with unlocked phones, most true Caller-ID (where the phone can identify who is calling even if they AREN'T in your Contacts list) requires XML code embedded in the phone (somewhere, don't ask me where) by the provider. Some providers use the same frameworks, so it's possible to get it working from network to network, but in most cases no.
I've never seen a situation tho, where it couldn't pick up the name from the Contacts list, based on the number coming in. I seem to remember you can turn on a feature called "International Dialing Help" that might bring them both together. OR put the entire phone number in your contacts. (As it is displayed when it comes in on Text).
drtolson said:
Actually, if I remember correctly from my previous experience with unlocked phones, most true Caller-ID (where the phone can identify who is calling even if they AREN'T in your Contacts list) requires XML code embedded in the phone (somewhere, don't ask me where) by the provider. Some providers use the same frameworks, so it's possible to get it working from network to network, but in most cases no.
I've never seen a situation tho, where it couldn't pick up the name from the Contacts list, based on the number coming in. I seem to remember you can turn on a feature called "International Dialing Help" that might bring them both together. OR put the entire phone number in your contacts. (As it is displayed when it comes in on Text).
Click to expand...
Click to collapse
I tried saving the entire number, but because local Israeli numbers get an extra "0" the phone is not able to ID them. Local call comes in as 050-5555555. SMS, like an intl. call, comes in as +97250-5555555. The "International Dialing Help" really helps when you're dialing. I thought it would fix the caller-id issue but it doesn't.
I spoke with HTC and with WP8 support on twitter. It's a known issue for T-mo phones and according to WP8 support, it has been forwarded to the appropriate team which probably means it'll be fixed in months to come. Until then, the only option is to get the phone flashed by one of the Israeli carriers with the Israeli version of the OS.