Default ATT APN? - Captivate General

Anyone know what it is? I had mine set to Tmobile now I have no idea how to change it back (I think I've discovered a problem with MMS not sending when it's set on Tmobile APN... Just have to change it back to verify this).

I turned off boot emulation and it restored it after a reboot.
For other people, the default ATT APN is 310410.
I'd highly not recommend using Market Access to emulate it on boot.
Seems to have prevented some emails (data) from sending, as well as not allowing my MMS to send (but oddly enough... browsing and stuff still worked- which is why it took me so long to figure it out because it appeared data was working).

TexUs said:
I turned off boot emulation and it restored it after a reboot.
For other people, the default ATT APN is 310410.
I'd highly not recommend using Market Access to emulate it on boot.
Seems to have prevented some emails (data) from sending, as well as not allowing my MMS to send (but oddly enough... browsing and stuff still worked- which is why it took me so long to figure it out because it appeared data was working).
Click to expand...
Click to collapse
That is not the APN, that is the SIM card number.
The APN is how the network connects:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank

310410 is AT&T network id.
Captivate also suffers from MMS problem if your phone is using 2G/EDGE.

foxbat121 said:
310410 is AT&T network id.
Captivate also suffers from MMS problem if your phone is using 2G/EDGE.
Click to expand...
Click to collapse
I did not know about the MMS problem but being on 3G it works fine. What the heck...

Thanks for the info nbs11.
That saved me a lot of time.
Peace

What problem does it have with mms in 2g? Mine works just fine.
Sent from my Captivate using XDA-APP

Doesn't really matterrs any more. JH7 update fixed it.
It won't send MMS on EDGE when picture size > 100KB.

Related

Infuse APN Settings help

Hi guys, just got the new Infuse. I can't get data/3G. Voice works. I went into the APN settings, and there are two apns. One is called ATT Phone and one ATT WAP. I cannot choose between the two, I cannot delete them, I cannot edit them, I cannot add a new APN. Looking at the ATT WAP apn is missing the username and password, and I guess that's why it doesn't work.
I've never encountered an android device where I couldn't modify the apns, so I don't know what to do. Any ideas? Thanks!
What provider are you using?
Look in the market for apn. I forget the name of it, but there are several apn managers in the market that will let you backup and edit your apn some Android phones require two to work it seems. And if memory serves one of them is mostly blank.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
I'm using ATT. I played around it some more, and finally it let me save a new APN and I'm able to select it, so now everything works fine...
That was the normal setting for the phone as you described.
It should not have been a need for you to edit anything. My phone had the same settings and worked fine.
I have the same problem. Can you give me an instruction of how to fix it?
I just went to setting>Mobile Networks>Access Point Names
Then i added the new APN that my service provider her in the Dominican Republic gave me.
Have not reset the phone or tried anything yet.
Is this the correct process? WHere have you guys been trying to change it that it will not let you?
Here are the exact setting that work for me..
AT&T Settings.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: internet + mms
I hope this helps like it helped me.
Rocky.
Rocky is correct. I was having a similer issue and I have to add a new wntry by going to the Apn and adding a 3rd one like this. The name did not matter as I called mine test and used the same setting that Rocky posted (I got them from youtube shwing how to add it).
Now I have 3 APN and it works correctly.
THANK YOU!!! I am on infused 2.2.3 and everything was working peachy until a few days ago when I could no longer connect to data. I could get phone calls, but no data. I tried flashing a new modem, tried a new kernel, and was fixin to restore to stock because I didn't know what else to do until I say Rocky's post with the APN settings. This worked like a charm. Thanks again!!!
I was going to post this the other day but wanted to make sure it worked first. I stumbled onto this post in the SGS2 forums which gives the simplest solution that have given me the best result. The other suggested APN settings I've seen in various threads never worked for me. I wouldn't expect as monumental a jump in bandwidth as he shows, but it seems to be doing well otherwise.
[FIX] AT&T SGS2 Data Speed Issue's (Correct APN Settings)
Tgrifftto, did you try and successfully use those apn's on an infuse? I tried them and didn't get a connection, I'm running CM7.
Sent from my SGH-I997 using XDA App
I used them with the Infused v2.2.3 ROM and they worked well. I flashed to GSInfuse 1.1.5 today however to try on there because the last time I flashed this ROM it was bouncing sporadically between 3G and HSPA+ and was hoping it would alleviate that issue. So far no luck.
The settings suggested before is one of the default APNs (can also be set by hitting "menu/reset to default" on the APN settings screen), so may be what you wanna go with if it works for you. Another option I found that has worked for several people is along with the default settings specified previously including the following settings as well:
User name: [email protected]
Password: CINGULAR1
It seems to definitely be a "results may vary" kindof thing.
tgriffttu said:
I was going to post this the other day but wanted to make sure it worked first. I stumbled onto this post in the SGS2 forums which gives the simplest solution that have given me the best result. The other suggested APN settings I've seen in various threads never worked for me. I wouldn't expect as monumental a jump in bandwidth as he shows, but it seems to be doing well otherwise.
[FIX] AT&T SGS2 Data Speed Issue's (Correct APN Settings)
Click to expand...
Click to collapse
I actually tried that myself and had MMS issues, but I think I have a working hybrid of the two. I have been getting decent speeds and MMS works but I have been getting erratic results and need to test more.
Edit: Ok so dont judge me on this if it doesn't do anything for you but the data seems convincing to me for the moment. I tweaked a few things that have been posted previously and one thing in particular seems to have changed things for me. I removed the http:// from the MMSC server address and dropped the specified MMSC Proxy. I honestly don't know why it would have altered the routing so drastically and I do not have a traceroute to show if it maps differently this way but the attached shows the results I'm getting and for some reason adding the http:// and the specified MMS proxy (66.209.11.32) always slows me down noticeably. I cant measure my signal loss (other than on the phone) to see if anything else happens to be interfering when I have the http:// and the proxy address in place (cloud bounce reflectivity, solar flares, increase usage on the high tension lines between me and the tower) but these results are what I get every time I swap settings. The bottom 3 results on the attached are with http:// and proxy included and the top 4 are without it. Phone was sitting on my desk in the same place for all tests with the only changes (I could control anyway) being the APN setting. You'll see my ping times are almost identical so my routing couldn't have changed very drastically, but the numbers mean something is different.
Here are the settings I am using
Name: ATTINTMMS (just what I called it call it whatever you want)
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
Server: Not Set
MMSC: mmsc.cingular.com
MMS Proxy: Not Set
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: internet + mms
As always this may or may not help you depending on the network architecture where you live and your local data traffic avg, but this is what it did for me.....
rocksteady said:
Here are the exact setting that work for me..
AT&T Settings.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: internet + mms
I hope this helps like it helped me.
Rocky.
Click to expand...
Click to collapse
im running ics miui and under APN Type it just opens a field to type into like a text. when i reset settings to default it sets this to *...just a star. i see everyone has this internet + mms but i dont get any options. this is causing my calls to be dropped drastically and my data to cut in and out.
sl0v4k said:
im running ics miui and under APN Type it just opens a field to type into like a text. when i reset settings to default it sets this to *...just a star. i see everyone has this internet + mms but i dont get any options. this is causing my calls to be dropped drastically and my data to cut in and out.
Click to expand...
Click to collapse
I havent tried it but i posted a possible solution in the miui thread...my apn settings disappeared after i flashed pikachus thunderbolt but reappeared after a restart....i dont think that your problem is that easy tho?
Also when you finally figure it out, i read in the Thunderbolt thread that changing APN from "wap.cingular" to "phone" will increase data speeds....according to linuxbozo
Hope this helped
Sent from my SGH-I997 using xda premium
albee320 said:
I havent tried it but i posted a possible solution in the miui thread...my apn settings disappeared after i flashed pikachus thunderbolt but reappeared after a restart....i dont think that your problem is that easy tho?
Also when you finally figure it out, i read in the Thunderbolt thread that changing APN from "wap.cingular" to "phone" will increase data speeds....according to linuxbozo
Hope this helped
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
yea the "phone" thing does give me faster speeds. i still get cut out a lot though i love how tech support doesnt know sh*t lol. its been happening to me on all roms.
Guys, one thing to note is that CM7 (and in turn MIUI), don't like multiple APNs. AT&T runs their ROMs with two different APNs, keeping the data APN separate. This is fine on any ROM based on AT&T's releases, however, if you try to use two on CM7, you'll likely run into issues. The best thing to do is disable the "phone" APN and only use the "wap.cingular" APN. If you have both on your phone, you can do this by adding "default" to the list of APN types for the "wap.cingular" APN (or you should be able to entirely delete, just make sure to add default to "wap.cingular").
If you do run an AT&T based ROM, I highly suggest you do use both with "wap.cingular" for mms and supl APN types, and "phone" for default. This is the absolute only "trick" you can do to make the phone's data a little faster (since build.prop changes don't do anything).
Here are the details for both:
"wap.cingular" APN:
Name: ATT MMS
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: mms,supl (and default if you are only using this APN)
APN protocol: IPv4
"phone" APN:
Name: ATT
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default
APN protocol: IPv4
I notice a definite increase in response time with the "phone" APN. Pages seem to load a lot faster, regardless of what actual speed increases it gives you, so I recommend using that if you aren't on CM7 or MIUI. If you are, well, stick to single APN or else you'll see data issues, especially in Market.
sl0v4k said:
im running ics miui and under APN Type it just opens a field to type into like a text. when i reset settings to default it sets this to *...just a star. i see everyone has this internet + mms but i dont get any options. this is causing my calls to be dropped drastically and my data to cut in and out.
Click to expand...
Click to collapse
It's not "internet + mms", you specifically type in "internet,mms". It is just a text field. You have to type in what you want. Actually, "internet + mms" may be a valid setting in that field, but I've always seen it comma separated, so that's what I'd stick to. I'm not sure what valid APN types there are, the ones I know of are mms, supl, internet, and default. default obviously being the catch all for anything not configured in another APN.
AJerman said:
Guys, one thing to note is that CM7 (and in turn MIUI), don't like multiple APNs. AT&T runs their ROMs with two different APNs, keeping the data APN separate. This is fine on any ROM based on AT&T's releases, however, if you try to use two on CM7, you'll likely run into issues. The best thing to do is disable the "phone" APN and only use the "wap.cingular" APN. If you have both on your phone, you can do this by adding "default" to the list of APN types for the "wap.cingular" APN (or you should be able to entirely delete, just make sure to add default to "wap.cingular").
If you do run an AT&T based ROM, I highly suggest you do use both with "wap.cingular" for mms and supl APN types, and "phone" for default. This is the absolute only "trick" you can do to make the phone's data a little faster (since build.prop changes don't do anything).
Here are the details for both:
"wap.cingular" APN:
Name: ATT MMS
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: mms,supl (and default if you are only using this APN)
APN protocol: IPv4
"phone" APN:
Name: ATT
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default
APN protocol: IPv4
I notice a definite increase in response time with the "phone" APN. Pages seem to load a lot faster, regardless of what actual speed increases it gives you, so I recommend using that if you aren't on CM7 or MIUI. If you are, well, stick to single APN or else you'll see data issues, especially in Market.
It's not "internet + mms", you specifically type in "internet,mms". It is just a text field. You have to type in what you want. Actually, "internet + mms" may be a valid setting in that field, but I've always seen it comma separated, so that's what I'd stick to. I'm not sure what valid APN types there are, the ones I know of are mms, supl, internet, and default. default obviously being the catch all for anything not configured in another APN.
Click to expand...
Click to collapse
ooohh thanks very much buddy. my issue was when i typed that with the plus sign i would loose data completely. actually everything except default and * cause me to loose my data. i am running miui and i did notice that the 2 apns make the phone go ape****. i kinda setup my own through a lot of research and googling and i came up with this which is making it go flawlessly except for the speed its not as fast as it can be. my setup is:
Name: AT&T
APN: phone
Proxy: wireless.cingular.com
Port:80
Username: [email protected]
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN Type: <not set> (this seems to work best this way)
APN Protocol: IPv4
for me if i leave out the username and pass then my data connection cuts in and out. like it never wakes up when i start using phone
sl0v4k said:
ooohh thanks very much buddy. my issue was when i typed that with the plus sign i would loose data completely. actually everything except default and * cause me to loose my data. i am running miui and i did notice that the 2 apns make the phone go ape****. i kinda setup my own through a lot of research and googling and i came up with this which is making it go flawlessly except for the speed its not as fast as it can be. my setup is:
Name: AT&T
APN: phone
Proxy: wireless.cingular.com
Port:80
Username: [email protected]
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN Type: <not set> (this seems to work best this way)
APN Protocol: IPv4
for me if i leave out the username and pass then my data connection cuts in and out. like it never wakes up when i start using phone
Click to expand...
Click to collapse
See, I thought I remembered one of them needing the username and password, however, I don't have one in my phone and it seems to work just fine. *shrug* Whatever works I suppose! But yeah, on MIUI just stick to single APN. I would assume not setting the APN Type would cause it to automatically default to everything using that APN (if it's the only one).
im one of the infuse owners and i noticed something with the signal issue ive been having for a very long time. data fix didnt work for me nothing seemed to work for me. the best results i get is with KI3 modem. also when i try to set "network type selection" to 3G only sometimes it automatically resets to 3G preffered which is what gives me the issues. but the thing i noticed is i have these severe issues of service cutting in and out when i am on umts. when i force my phone on hsdpa my download speeds almost triple my calls r beautifully clear no cutting in and out. any thought on this? is there a way i can have my phone on hsdpa only? and default the setting to 3G only in network settings? thanks in advance for any input i would really like to solve this

[Q] No data connection

I have searched on xda, and on google for this problem. I also tried enabling the options for 2g/3g, rooting the phone, and doing all of that successfully. I have restored the device, and checked for system updates, and my Atrix 2 is up to date. I can also send/receive sms, and I can call people as well. I have a 2GB data plan for AT&T which worked on my previous phone, HTC Inspire 4G. But once I switched to the Atrix 2, no matter what I have tried, I cannot access the internet using my data. If I open the brower, it says:
"No network connection
Brower cannot load this page because there is no internet connection."
I have my data enabled in Settings>Battery & data manager>Data delivery>Data enabled
I have no idea what the problem is... Can someone help?
chensan215 said:
I have searched on xda, and on google for this problem. I also tried enabling the options for 2g/3g, rooting the phone, and doing all of that successfully. I have restored the device, and checked for system updates, and my Atrix 2 is up to date. I can also send/receive sms, and I can call people as well. I have a 2GB data plan for AT&T which worked on my previous phone, HTC Inspire 4G. But once I switched to the Atrix 2, no matter what I have tried, I cannot access the internet using my data. If I open the brower, it says:
"No network connection
Brower cannot load this page because there is no internet connection."
I have my data enabled in Settings>Battery & data manager>Data delivery>Data enabled
I have no idea what the problem is... Can someone help?
Click to expand...
Click to collapse
Maybe reboot phone?
Sent from my MB865 using Tapatalk
I have rebooted it at least 5 times now. GPS does not work either.... wtf is wrong with my phone...
I had the exact problem a month ago. I called AT&T, and they did some setting from their side, then internet came back.
Sent from my Transformer TF101 using xda premium
chensan215 said:
I have rebooted it at least 5 times now. GPS does not work either.... wtf is wrong with my phone...
Click to expand...
Click to collapse
Might need to call AT&T. Same thing happened to me once and I had to give them my sim card info. Either way they might be able to help.
Sent from my MB865 using Tapatalk
Fixed! I had to create a new APN
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
but now it works haha
chensan215 said:
Fixed! I had to create a new APN
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
but now it works haha
Click to expand...
Click to collapse
Hey good deal! also thanks for the apn info.
Sent from my MB865 using Tapatalk
chensan215 said:
Fixed! I had to create a new APN
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
but now it works haha
Click to expand...
Click to collapse
I had to do exactly the same thing! Inserted my SIM from my Nexus One and I had phone but no data. Not sure why the existing APNs did not work, but this solved my problem as well.

[Q] problem with mobile network

for some reason my phone wont connect to at&t's mobile network period. as of right now my service is disconnected but i thought it was still supposed to connect to the network incase i had to make an emergency call but it wont even do that. i flashed cm7 and it was fine for about a week. not too long after that i noticed the options for the apn's were both messed up so i fixed them but it still didnt help anything. i alo tried flashing cm7 again and ive tried 2-3 different roms and they all show its disconnected. does anyone have an idea of what it might be?
Did you just try resetting your apn, within that section? When you open the apn, click menu..reset...
when i do that it wipes the setting for both apn's and i have to go back and manually put the info in again and even then it doesnt work. i know it reads the sim card though cause when i take it out it tells me theres no sim card found
Fix AT&T mobile network problem
Following settings may fix it: From - http://forum.xda-developers.com/showthread.php?t=1506338
I made 1 new APN with the following and set it to this APN with auto switching off. Since I have had 0 data issues and MMS is working fine:
Name: AT&T
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank

[Q] MMS issues?

Hey all, Moto G US version owner here, and having trouble getting MMS working on at&t. I spent some time on the phone with them earlier and was more or less told that the phone wouldn't work right on network, or something to that effect. This was frustrating since everything else worked fine, and it is supposedly tailored for US networks after all. So I tried several different APN settings from online but to no avail. I even copied over the APN settings from my unlocked GS3 (which has no problems at all on at&t's network) and it still wouldn't work. I've contacted Moto's customer service as well and they've given me the number for Level 2 support, will be speaking to them soon.
I'm at a loss here.. yes, it is a new device and all, but is anybody else having this problem?
Try Handcent
boogalah said:
Hey all, Moto G US version owner here, and having trouble getting MMS working on at&t. I spent some time on the phone with them earlier and was more or less told that the phone wouldn't work right on network, or something to that effect. This was frustrating since everything else worked fine, and it is supposedly tailored for US networks after all. So I tried several different APN settings from online but to no avail. I even copied over the APN settings from my unlocked GS3 (which has no problems at all on at&t's network) and it still wouldn't work. I've contacted Moto's customer service as well and they've given me the number for Level 2 support, will be speaking to them soon.
I'm at a loss here.. yes, it is a new device and all, but is anybody else having this problem?
Click to expand...
Click to collapse
I was able to sent text messages just fine, but not MMS photos. I installed Handcent and set the photo size to 100k and the messages went through. I'll be calling Tmobile tomorrow to make sure it's not a provisioning issue.
I'll update if a solution is found.
oldcrow66 said:
I was able to sent text messages just fine, but not MMS photos. I installed Handcent and set the photo size to 100k and the messages went through. I'll be calling Tmobile tomorrow to make sure it's not a provisioning issue.
I'll update if a solution is found.
Click to expand...
Click to collapse
Would this help with receiving MMS messages though? I have issues sending and receiving them currently. Have not had an opportunity to speak with Motorola's level 2 support yet.
boogalah said:
Hey all, Moto G US version owner here, and having trouble getting MMS working on at&t. I spent some time on the phone with them earlier and was more or less told that the phone wouldn't work right on network, or something to that effect. This was frustrating since everything else worked fine, and it is supposedly tailored for US networks after all. So I tried several different APN settings from online but to no avail. I even copied over the APN settings from my unlocked GS3 (which has no problems at all on at&t's network) and it still wouldn't work. I've contacted Moto's customer service as well and they've given me the number for Level 2 support, will be speaking to them soon.
I'm at a loss here.. yes, it is a new device and all, but is anybody else having this problem?
Click to expand...
Click to collapse
I'm on AT&T Gophone, not AT&T postpaid, so your experience may be different, but I've had no problem sending MMS to other phones (android + iphones) or receiving them.
The AT&T rep set up two APN that I can see, including them here for you to try out if you want:
Name: AT&T Phone
APN: phone
Proxy: not set
Username: not set
Server: not set
MMSC: not set
MMS proxy: not set
MMS port: not set
MCC: 310
MNC: Not set
APN type: default, supl, hipri, dun
APN protocol: IPv4
APN enable/disable: APN enabled
Bearer: unspecified
MVNO type: none
MVNO value: not set
AT&T US MMS
Name: AT&T US MMS
APN: phone
Proxy: not set
Username: not set
Server: not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: not set
APN type: mms
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled
Bearer: unspecified
MVNO type: none
MVNO value: not set
FWIW I've also used this AT&T APN Suggested from ATT forum and it also works with MMS after a reboot.
NAME: AT&T Phone
APN: wap.cingular
Proxy: (not set)
Port: (not set)
Username: [email protected]
Password: CINGULAR1
Server: (not set)
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: (not set)
APN type: (not set)
APN protocol: IPv4
APN: enabled (may need to check this, not sure about your model)
Bearer: unspecified
angomy said:
I'm on AT&T Gophone, not AT&T postpaid, so your experience may be different, but I've had no problem sending MMS to other phones (android + iphones) or receiving them.
The AT&T rep set up two APN that I can see, including them here for you to try out if you want:
Click to expand...
Click to collapse
Prepaid? Last I remember prepaid doesn't support 4G devices for data. And MMS uses data, not wifi. And while I'm aware the MotoG can use 3G(I have mine on Verizon)...AT&T tends to lock down their better phones to 4G only to get users on the contract.
I could be mistake and that phone is supported, but I don't believe they run 4G on prepaid/gophone and hence you might not be able to run data.
As of 2012 they had an inner memo to their call centers saying that 4G devices, Rimms, and iPhones wouldn't be supported for Data any further.
Having same problem as original post
I'm having the same problem as original post, except I'm using StraightTalk. My Moto G is the US version - GSM (uses AT&T network). I've set it up to use the APN that StraightTalk provided. Browser works OK, so I know data services are working, but I can't send or receive MMS messages. I've also tried Handcent that was mentioned in this thread, but it still doesn't seem to be sending. I've also tried the AT&T APN settings from this thread, but no go. Not sure what else to do...

[Q] Can't Send Picture Messages

As the title says, I can't send picture messages. I can receive them fine but once I try to send one it seems like my network locks up because I can't even send a simple text message for the 5-10 minutes the device is trying to send the picture and then inevitably gives up. Called T-Mobile the other day and they said they were having "network issues" but I was wondering if anyone else has this issue or has a solution.
Thanks in advanced.
i am also having MMS issues sending pics but also have problems with group texts. They arrive in a individual text and have to hit download and usually fail.
Having same mms issues on my tmobile note 5. Takes forever to send and usually fail. Hitting send then restarting the phone usually helps.
Could be a network issue too
I was gonna ask that too. Anyone have mms apn for me? Thanks. People trying to send me pictures but I can't get them
TheUndertaker21 said:
I was gonna ask that too. Anyone have mms apn for me? Thanks. People trying to send me pictures but I can't get them
Click to expand...
Click to collapse
I know the t mobile version has can be rooted, but if any of you are using ad block plus, that could be your problem.
I couldn't send pics on mine using ABP until I added verizon's mms url to the exclusion list.
pool_shark said:
I know the t mobile version has can be rooted, but if any of you are using ad block plus, that could be your problem.
I couldn't send pics on mine using ABP until I added verizon's mms url to the exclusion list.
Click to expand...
Click to collapse
Show your apn?
TheUndertaker21 said:
Show your apn?
Click to expand...
Click to collapse
I have Verizon, not sure how my apn settings would help you. All I'm saying is if any of you with mms issues are using ad block plus, start there.
bumping this up
been having the same problem for a few weeks now
TMobile note 5, no rooted etc etc
WhiteSRT69 said:
bumping this up
been having the same problem for a few weeks now
TMobile note 5, no rooted etc etc
Click to expand...
Click to collapse
Same here... SMS working just find but MMS will not send or receive...
Using Verizon Note 5 with the following settings:
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
cyberandroid said:
Same here... SMS working just find but MMS will not send or receive...
Using Verizon Note 5 with the following settings:
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
Click to expand...
Click to collapse
i factory wiped my device and it has been working since,
i also called customer service for Tmobile and they did something with the sim card to their network,
im assuming one of the two had to have fixed it
WhiteSRT69 said:
i factory wiped my device and it has been working since,
i also called customer service for Tmobile and they did something with the sim card to their network,
im assuming one of the two had to have fixed it
Click to expand...
Click to collapse
Found these additional setting and MMS sending and receiving is working now... but had to wait for a bit for the settings to take place. They worked after about 30 minutes.
Name: T-Mobile US LTE
APN: fast.t-mobile.com
Proxy: Not Set (leave blank)
Port: Not set (leave blank)
Username: Not Set (leave blank)
Password: Not set (leave blank)
Server: Not set (leave blank)
MMSC : http://mms.msg.eng.t-mobile.com/mms/wapenc
Multimedia message Proxy: Not set (leave blank)
Multimedia message Port : Not set (leave blank)
MCC: 310
MNC: 260
Authentication type : None
***NOW THIS HERE IS THE IMPORTANT PART I HAVE FOUND THAT WORKS. ADD IT EXACTLY LIKE BELOW, NO SPACES****
APN type: default,mms,supl,hipri,admin,mobile
APN Protocol : ipv4/IPv6
APN roaming protocol : IPv4
Bearer: Unspecified
Mobile virtual network operator type: None
Unlocked s6 not sending mms.
TheUndertaker21 said:
Show your apn?
Click to expand...
Click to collapse
Im unlocked via stifilz. Tmo service, but cant send mms. Would like lte/4g all the time as well. Thanx a lot.

Categories

Resources