Hi,
I have got a KJAM lastly. Its WM5.0. Now, the problem is WLAN by default is always disabled. I have to manually enable it everytime I soft reset it. Is there a tweak or setting which will make WLAN always on by default. Also when the device is connected to cradle WLAN if connected is disabled as soon as I connect it to the cradle. Can some one from this group help out to solve this.
Regards,
Bhagat Nirav K. :?:
HI all,
I'm experiencing the following problem with my Cruise.
When having the Cruise connected to my PC through USB cable (Activesync on), mobile applications other than IE cannot access the Internet.
My configuration is:
on ActiveSync
my computer is connected to: "work network"
on the Cruise
start > parameters > connections > connections
advanced tab > network selection is set to work network for both types of networks
proxy configuration on the other tab is the correct one for my network
The only application on the Cruise capable of connecting the Internet with this configuration is IE: when starting, it asks for proxy username & password and pages are loaded correctly.
Any other application (the HTC today screen, when looking for the meteo data, Opera, QuickGPS...) do not arrive to connect the Internet falling in timeout (no request for proxy authentication).
Of course, at home (ActiveSync configured as connected to the Internet) everything work fine and all applications connect to the Internet w/o problems.
Any idea?
Thanks
Hi all.... ive got pretty much the problem? Any solutions guys??
Pretty much same here, except for QuickGPS... it manages to connect somehow.
it works for me, but without proxy...
Maybe this would help you?
Hey Wis38!
Just try to open the following ports ins your proxy:
990 (RAPI)
999 (Status)
5721 (DTPT)
5678 (Legacy Replication)
5679 (Handshake & Legacy Replication)
26675 (Airsync)
For further informations try the MS kb259369 and kb904667.
btw, good luck
Frank
Yeah, thanks.
But I'm not proxy administrator, and can't open those ports...
Any other ideas?
Ask your admin
Hmm...
I think then you have to ask aour admin...
Frank
try this
I had the same problem
you can try this
http://www.mobilitysite.com/boards/activesync/137666-fix-unknown-error-0x80072f78.html
How can I use my Polaris like USB modem to connect Notebook on internet.
Is there some application or something like that?
Thanks.
try this one
on your device, go to start menu > programs > internet sharing
choose which connection you want to use (USB or BT) then press connect
if you choose USB, plug the USB cable to both PC and device immediately after connetion established.
if you choose BT (you have to make sure that your device have been paired to the computer), connect to your device through BT network access
in internet sharing mode, all activesync connection will be disconnected
there is a registry hack for windows to fix this issue, but normally the issue also effects syncing. But the bad news is that itsmore then likley that your network admin has locked down this type of access.
only IE keeps working via proxy.
Other 3rd party apps seem to prefer a direct connection ignorinng how windows settings are actually used to reach the Internet
I have exactly the same problem: IE can reach the Internet via the proxy in our work network and other apps like QuickGPS cannot.
Strangely enough this happens only with my HTC Touch cruise and does not happen with my Fujitsu Loox N560, which has exactly the same settings.
I have to note that I upgraded recently to WM 6.1 on the TC and that with WM6 it used to work
Any ideas
same problem for me... (qtek S200 & win 6.1)
guys,
i don't know if you'll agree with me but i think that the lack of wifi makes the treo miserable; especially that most mobile providers charge stupid money for data packages - and those that don't (i.e. vodafone) block all the ports besides port 80 and make their data plans useless anyway...
that's why i'd love to be able to use bluetooth PAN to connect to either PCs or BT access points to get internet and network connectivity...
is there any way of adding the network cards thing and bluetooth PAN drivers?
or perhaps - does that functionality come along with wm6.1?
Try to figure out the right names.. because my ROM is italian and I'm writing the settings in the english translation...
You can set up the internet access to be done through the BT in this way (WM6.1):
- pair you device with the PC.
- on the device open menu->programs->ActiveSync
- on the device ActiveSync: menu->connect through bluetooth
a new COM port is generated in the PC by the BT stack.
- on the PC ActiveSync 4.5 panel, open File->connection settings
- flag enable the wireless connection of device when connected with desktop"
- flag enable the "allow connection to one of the device: COMxx"
where COMxx is the com generated by the BT stack.
Disconnect the BT and reconnect.
You should have a new connection on the device..
Now go to the device settings->connections->Advanced tab Network Selection
change the internet connection from ISP to local network.
That's it... now you'll be able to navigate with the device through the BT
http://www.pocketpccentral.net/help/palm/750_wifi.htm
Spectec miniSD WiFi card
Hi all,
I (MiTAC Mio A702, some CSR BT/WLAN combo chip) and some friend (either Diamond or Touch HD, I dunno which one he has now, he changes every week or so) have some strange wlan problems... as soon as the WLAN password contains something other than 0-9 (encryption method doesn't change anything), then only ~1 out of 20 attempts to connect works. The FritzBox (it is the only router we have with logs) says "authentication failed", the PDAs simply change the icon of the wlan to unavailable in Wireless manager.
Any idea why this is so, how we can debug it and especially, any easier to use app for managing WLANs than crappy WM6's Wireless manager?
Thanks,
Marco/harddisk
My phone is an Xperia X1 and I have Exchange ActiveSync setup. I can get the syncronization over wlan both in my office and over other wlans. I would like to know if there's any way to "force" the ActiveSync to happen over wlan before trying the data connection. This way when I'm covered by a wlan that I'm connected to, the sync would be cheaper
Basicly I'm after some process that when i want to synchronize it checks the wlan first and only then connects to the celular porovider. Does it make any sense? All this because I miss the autosync that my old Nokia made everytime it was in reach with my PC. What I'm trying to achive is the best workaround for this missing feature in Windows Mobile. Or is there a new option that I don't know ?
Thanks for any support
rco3lho said:
My phone is an Xperia X1 and I have Exchange ActiveSync setup. I can get the syncronization over wlan both in my office and over other wlans. I would like to know if there's any way to "force" the ActiveSync to happen over wlan before trying the data connection. This way when I'm covered by a wlan that I'm connected to, the sync would be cheaper
Basicly I'm after some process that when i want to synchronize it checks the wlan first and only then connects to the celular porovider. Does it make any sense? All this because I miss the autosync that my old Nokia made everytime it was in reach with my PC. What I'm trying to achive is the best workaround for this missing feature in Windows Mobile. Or is there a new option that I don't know ?
Thanks for any support
Click to expand...
Click to collapse
Hi there,
If your data is not connected, it will obviosuly try to sync via wifi first right? In theroy if both are connected wifi should be prefered afaik.
There is a good guide for getting ur device to auto connect to ur PC via bluetooth to auto sync via active sync, (see the guides section in my sig below, guide by my good friend Nir36)
Cheers.