Dust - Captivate General

Anyone else getting dust caught in the edges on the front of the screen. It drives me absolutely crazy.

not yet, hopefully not ever

I have had dust on the side. Used edge of piece of paper to get it out. Not a big deal but my zagg shield i ordered should cover the area from what i have read.

Related

Zagg invisibleshield inital review

Just applied the invisibleshield and im not too impressed.
First, the front and more so the back covers are too small and the corners of the phone is not covered. Second, the home key cover and camera lens cover are too big, so I avoided the home button cover and stuck the camera lens on by taking off the back cover. Third and finally the tacky feel means its a fingerprint and oil magnet, as I have sweaty hands this is especially annoying.
On the plus side it was relatively easy to put on and remove the bubbles.
sounds like you got the Full Body "Easy Install" version the Full Body "Maximum protection" version would have covered the corners, and have extended wings that goes up the sides.
same here i've a oily face / fingers, Zagg will not work for me as i've posted on other topic, I'll prefer the regular 3M PET screen protectors + a Gel case instead
Does it make the phone any less slippy to hold?
Ollie2 said:
Does it make the phone any less slippy to hold?
Click to expand...
Click to collapse
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
would u mind to put some pics ???
i've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
i had the invisi shield on my touch hd, so the first thing i did when i got home from getting my shiny new SGS was to order one, still not arrived and thats with 2-3 day delivery. i did the right thing and ordered the full cover as it was the same price as the easy install version, i will post pics when i have recieved it and have it done.
as for gel cases i have one of them on order also as it has done a wonderfull job of protecting my touch hd (till i drove over it)
i gave up on the zagg, samsung is release nice fashion faceplates for the SGS
and i'm already using those nice gel cases + screen protector, that's more than enough protection for the phone.
out of the box, the phone is already super strong, and anti scratch, did you see the video?
it will only break the screen if you drop it from a 1.5 m high
it may be anti scratch but ive scratched the proximity sensor area already so hopefully the shield will stop other scratches. I would use a gel cover but the shield really doesnt add anything to the thickness, while the cover would.
I get some pics up as soon as I can get hold of a camera.
shohid1234 said:
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
Click to expand...
Click to collapse
Thanks for the reply.
I've actually bought a silicone case and a screen protector for it and it's made it much more manageable and easier to hold and saved the phone when I dropped it the other day.
j_h3000 said:
would u mind to put some pics ???
I've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
Click to expand...
Click to collapse
1+​
1+​
1+​
what about touch sensitivity?
I installed an invisibleShield as soon as the phone arrived. It's a pain in the ass to install as usual, and I was not able to make the top two corners look good. They've already started to peel off but I guess it's going to take a while before the back has to be replaced so I'm not going to worry about it.
Is it worth it? I'd say yes, even after a year you'll still have a phone that looks brand new. Now, the edges around the phone will probably get a couple of scratches because unlike the shield for the iPhone this one does not cover the chrome/metal/whatever bezel. Not a big deal if you ask me.
So, touch sensitivity? It's good. It's just as sensitive with the shield as without. Your fingers won't glide as well across the surface tho. One more thing which you'll see in the pictures; Dust usually collects around the edges of the shield, there is not much you can do about that. Trust me, the dust looks much worse in a picture than it does irl. You can barely see it.
Pictures:
Front:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0003.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0004.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0005.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0006.JPG
Back:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0008.JPG
I ordered the full body shield as it was half price.
I just used cheap 6 for 1 ebay screen protector as this one has too much of a grip.
As for the back, as said above the top corners just will not fit completely and lift just a tiny bit at the tips.
Getting tiny bubble out results in the orange peel effect. This is because the shield is slightly rubbery and streches as you force out the bubbles.
IMO the shield protects very well, but I cant imagine ever getting the 'perfect' look with it on.
Its far from invisible, due to slight orange peel, minute bubbles which will only turn into more orange peel should I try to force them out.
If I ever buy one again, it will have graphics on it(they have those for iphone etc, perhaps the sgs is too new..) as then the slight imperfections would be less obvious.
Id rate the item 6/10. It doesn't protect the bezel or extreme corners and doesn't look great where it does protect.
thx for the pics. i got the same edge problems on my old iphone too. the zagg shield is ordered, i should get it next week.
MagicOnline said:
i should get it next week.
Click to expand...
Click to collapse
Don't count on it. I ordered mine on the 16th and I still don't have it (on the 25th).
i knew it would not cover the corners properly, it looks ugly when there are little pieces of plastic cropping out of the phone.
For the back I think the Zagg sheild is brilliant, almost full cover and invisible, with no extra bulk, and a little bit more grip.
For the front, I probably prefer a normal screen protector. My wife has a $1 screen protector from flea-baythat is much better to use (although needs more regular cleaning). The zagg is a little tacky meaning your finger doesn't slide as easily (not ideal for Swype).
Fitting:
I gotta confess that I didn't get the back perfect, but mainly because Ifit it in a dimly lit room, the cover edges are hard to see without bright light. I did get the corner 90% by using glad wrap (plastic wrap) tightly pulled over the corners and left overnight (saw this on a youtube demo video).
Also I once helped a colleague who fits 3m window film for a living. I noticed that he used a lot of liquid, so for the front I made up some more liquid, enough to refill the bottle Zagg provide. I used the whole bottle on the front, making fitting much easier, you can just slide tje cover around until it's perfect, then you just push out all the liquid. Using more liquid also seemed to help alleviate any bubbles. Also for the front I used a very bright light (480 lumens bike light) which made it much easier to see exactly where the edges were.
I'm also hoping that Zagg bring out the coloured/patterned backs, which in an email to me they said they would, then I'll use a regular screen protector for the front.
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
I just remixed a new solution: a couple of drops of baby shampoo with water in the bottle supplied. (I think you can use other stuff like washing detergent, but don't take my word, use google (3m film))
From the 3m website:
"3M™ Scotchtint™ Films are professionally applied by skilled, well-trained authorized 3M Dealers. Almost all of our films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges."
same here
liquid and electronics don't mix
i don't like the idea of having anything wet near my device.
WiseDuck said:
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
Click to expand...
Click to collapse

Does the type cover scratch the surfaces display?

Hello there,
do you guys know if the type cover scratches the surface display? I do know that mine is just a few weeks old and I was good to it, meaning it didn*t fall down or anything like that. Still, I got some scratches in it. I now think that this could be because of the type cover. Do you guys have any experience with that. And: Are there better covers out there, maybe even thinner? I don't need the keys all the time anyway.
The type cover,you mean the keyboard thingy?it never did scratch my surface
Sent from my HTC S510b using Tapatalk 2
2 covers available at the moment. The type cover and the touch cover. They are being replaced with the type 2 and touch 2 which are slightly slimmer, backlit and in the case of the touch 2 have more sensors so should be more accurate plus support multitouch gestures on the trackpad. There is also the power cover which seems to be a thicker type cover with a battery in it for charging a surface pro, surface pro 2 or surface 2 but *not* the surface RT (where it would just serve as a thicker type cover).
None of those cases should scratch the display. They are plastic, the screen is gorilla glass. Gorilla glass can only really be damaged by very sharp edges, sand/other grit and a few minerals. In your case most likely grit damaged it. Plastic could not scratch it.
It's a hard surface that can grind dust into screen when it's closed up. That goes for anything really, the risk is there. I have a few tiny dot marks on screen after using type cover for a few months and keeping everything clean and in a sleeve when not used. No big damage that I can even notice with screen on, though.
johnchad14 said:
It's a hard surface that can grind dust into screen when it's closed up. That goes for anything really, the risk is there. I have a few tiny dot marks on screen after using type cover for a few months and keeping everything clean and in a sleeve when not used. No big damage that I can even notice with screen on, though.
Click to expand...
Click to collapse
Mine is pretty noticable. I got a new surface RT without scratches and I'm kinda afraid now to use the type cover again...
Sephi said:
Mine is pretty noticable. I got a new surface RT without scratches and I'm kinda afraid now to use the type cover again...
Click to expand...
Click to collapse
Is it in an environment with alot of dirt and grit? It wouldnt just have to be the cover, it lying face down, going into a padded sleeve or the touch cover could also rub dirt over the front of your tablet.
SixSixSevenSeven said:
Is it in an environment with alot of dirt and grit? It wouldnt just have to be the cover, it lying face down, going into a padded sleeve or the touch cover could also rub dirt over the front of your tablet.
Click to expand...
Click to collapse
No, it's really not. For example, my Galaxy Note, and I really really wasn't good to it and it fell down quite a few times or were together with my keys in my pocket - does not have any noticable scratches. The Surface however has quite some big, deep ones which are clearly noticable even when the screen is on. And I don't know there they are supposed to come from other than the type cover.
OK, the type cover is DEFINITLY scratching the display. I got a few more scratches today after I took it with me in my bag and used the type cover as protection. The scratches all look kinda similiar and they are all in the upper region, I guess there is more contraction there. Horrible, I would NOT use the type cover as an actual display protection.
The strange thing is the scratches are all in the area without keys, the area where the touchpad is but to the sides, so it's no rough surface (no pun intended). I don't know where the scratches are coming from en masse but they are there, it's horrible. I know ordered this bag here: http://www.amazon.de/dp/B00D1HQPQC/ref=pe_386171_38075861_TE_item
Any thoughts?
Thats an absolute physical impossibility.
All materials have a hardness (or several hardnesses dependant on the method of measurement but the general principle applies the same).
In order for material A to scratch material B, material A must be harder than material B.
Plastic is not as hard as gorilla glass, nor is it rough edged (a very sharp point of a softer material if forced hard enough will scratch another harder material). Expecting a flat piece of plastic to scratch the glass on the surface is like throwing a ball in the air and expecting it to fall, doesn't happen.
If there is something in between then it can happen. Sand for example, it is harder than gorilla glass, its also a small particle that tends to stick to your screen so when you shut the cover on it the cover will be forcing the sand into the screen, due to the nature of the hinge on the surface the cover can wobble forwards and back a few mm rubbing the sand grain over a small area. Other bits of dirt can do it again, small bits of mud or whatever.
Plastic at most could only transfer the coating of the plastic to the glass which would wipe off, and that I highly doubt would happen.
As for more contraction, that would entirely be down to how you store the device. The touch cover only attaches with a simple flap, its free to drop open or closed at any time, if its stored with slightly more force in one corner then its not going to apply the force terribly equally across the device.
But where is it coming from? Scratches are everywhere and by no chance I got sand in my bag or anywhere else. It's been months since the last time I saw some sand. Living in the middle of germany.
It doesnt necessarily have to be beach sand. Concrete dust, mud, construction sand. All could do it (mud less so). Sand has a tendancy to hide in small spots in bags if there is any (or transfer from other items). Anything could be the cause, i find it highly unlikely to be the cover itself.
One thing you could try, can you find a sheet of soft fabric or foam or something that you could cut to size and wedge between the cover and screen. Might reduce the impact of whatever is going on. Can keep the sheet loose in your bag, stick it in when closing the cover. Or simply fold the keyboard over the back of the unit and put it in a netbook sleeve but that would be leaving the glass exposed to knocks etc
Well, I really looked into my bag but I can't find any sand or anything like that. Dust, obviously, is everywhere all the time. Like I stated before, y my GNOte is basically scratch free after 1,5 years of abusive use. I don't get it.
Sephi said:
Well, I really looked into my bag but I can't find any sand or anything like that. Dust, obviously, is everywhere all the time. Like I stated before, y my GNOte is basically scratch free after 1,5 years of abusive use. I don't get it.
Click to expand...
Click to collapse
YES, the type cover WILL scratch the display. I have heard it from other people and I have it myself.
NO, it is not the material, it is any grit that gets trapped in between them. Get a tiny grain of sand in there, you are in trouble.
YES, I use a screen protector now and it is getting trashed.
NOW I carry a large micro fiber cloth in my carrying case. Before putting the Surface away, I wipe off the display and keyboard. That has reduce the amount of damage. I'll still need to replace the screen protector often, but I'm OK with that compared to more glass damage.
I hate screen protectors with a passion. I will just stop using type cover then...
after reading this thread it is very bad news, this is a poor design by microsoft if they did not consider this. no laptop i have ever had scratches the display but many cheaper laptops ive had leave dust imprint around the keys and sometimes the keys even pressed the screen. now that the screens are so hard like glass obviously if little particles get trapped and rub it will scratch it. too bad as this was going to be my first gorilla glass product. i hate scratches so will ignore the type cover. even the touch cover will have the same issue if it is completely flush and pressed against the display.
what a damn shame
Indeed it does. I bought mine on Sunday night. Monday afternoon I noticed a scratch/pit on my screen when I was cleaning it off. I looked at the type cover, and there was a piece of grit/sand stuck in the soft, flat part where my right palm is not supposed to rest.
:crying:
willusdun said:
after reading this thread it is very bad news, this is a poor design by microsoft if they did not consider this. no laptop i have ever had scratches the display but many cheaper laptops ive had leave dust imprint around the keys and sometimes the keys even pressed the screen. now that the screens are so hard like glass obviously if little particles get trapped and rub it will scratch it. too bad as this was going to be my first gorilla glass product. i hate scratches so will ignore the type cover. even the touch cover will have the same issue if it is completely flush and pressed against the display.
what a damn shame
Click to expand...
Click to collapse
Microsoft likely did consider it, and decided that having a slimmer overall product would generate more revenue.
Some laptops dont have this issue because they have "spacers" around the screen that maintain a small gap between the keys and the screen when closed.
My Thinkpad has markings on its screen from its own keyboard, even though theres a massive 2-3mm gap between the keys and screen when closed. This is because the screen can flex a bit and likely got smushed into my keys (I'm pretty rough with my Thinkpad).
There isnt much you can do about it, almost every product has this issue.
My HTC One sits in my pocket with nothing else in it, and it has markings on it. I haven't been anywhere near a beach since I got the phone.
So like someone else said, all sorts of particles can scratch your screen.
Even Macbooks have this issue, its the reason why people sell specially cut microfiber cloths that are meant to be placed between screen and keyboard when Macbook is closed.
Either get a screen protector, deal with it, or wait a few decades until they make glass strong enough to resist everything.
My HP sleekbook has an imprint from the keys on the screen. I had my laptop bag on the passenger seat of my car, was cut up really badly by someone at 50mph, immediately wished that my car had decent ABS which it doesnt as it made a nice tyre squeal. Laptop bag slammed to floor, opened it up, laptop 100% intact, just has key imprints on the screen which are actually rubbing off (does literally seem to be dirt rather than physical damage).
I have my Surface RT with touch cover. I have been using it for a year. I never put any screen protector and I have scratches on screen. I carry my surface in my bag pretty much every week day. I don't find the scratches affecting any usability or affecting the quality of display. When the screen lights up while using, you are not going to see those scratches that easy. Only when screen off and at certain angle you will be able to see some. It's just a device for use for couple years, relax and enjoy it. Putting screen protector will protect the screen from scratches, but degrade your display color, viewing angle, reflection, brigtness, touch feel, etc.

full 360 tpu case

with all the issues reported on tempered glass protectors (I'd originally bought one myself) I ended up going with the Spigen tpu screen cover and the clear case with feels solid and they work together fine.
While browsing about I came across this:
http://www.ebay.co.uk/itm/161986959...49&var=461159948372&ssPageName=STRK:MEBIDX:IT
Its like a reverse case, essentially wrapping the phone completely and yes, the touch and sPen work fine through it. OK it doesn't feel like glass and you do get some polarisation when viewed at an extreme angle, but I kinda figure its better to have the whole glass covered than not and you don't use your phone at >60 degree angles generally, well I don't anyway. I left the spigen screen protector on under it, at least any dust getting under the skin won't get to scratch the glass itself and hasn't caused any issues. Unlike the Spigen case that leaves a lip at top/bottom of the phone body this is uniform which helps it slide in/out smoothly of the Brodit universal mount in the car to which I added a Qi plate.
May well order up one of these to see if it has a better feel to it, but that'll have to wait until the house move is done
https://www.google.co.uk/url?sa=t&r...9NA0q32Vq0bQj4ytimoM0w&bvm=bv.135258522,d.bGs
Somehow I doubt the drop protection on these is up to the "proper" cases but I'm more concerned about the edge glass suffering as that seems to be the real achilles heel on this "brilliant" design. Pity they never offered a flat non-edge version as I'd have much preferred that but other than that I'm more than happy with the phone overall...
hope this helps, at least another case option to consider
ok to update after a few days use...
So far happy with it, I did "shrink" the case a little in hot water to get it to be a more cozy fit.
Now its a bright day here, you do have a screen covered in dots with direct sun/very bright lighting but still fine if shaded. Also noted polarized glasses show rainbow patterns from the edges in the same way as viewed from acute angles.
For me, it'll do for now till something else comes along. At that price its OK for my needs

Case + screen protector, just case, or just screen protector?

I have an Incipio clear case on right now. It makes my glass screen protector pop off. So that's off for now.
I'm on my second PH-1 after a very minor fall cracked the screen on my first. (It was naked) But I had dropped it a couple of times.
Here's the thing, the back and sides were completely unscathed. The screen chipped a tiny bit on the corner on the first fall and then cracked across it with some shattering in the corner on another (from about a 1.5' fall from pocket to concrete when I was sitting on a bench).
With just a glass screen protector, you can hardly even tell it's on there (aka the phone still looks great). It also seems like with a good positioning, the SP or the plastic surround would make the first contact on any fall (given a relatively flat surface with no protrusions), thus protecting the screen. Aesthetically, I would love to get away with just the SP. I don't like casing this phone.
On the other hand, most cases are designed to also make first contact on a fall via a lip around the screen, etc. (The point of conflict with the SPs). So it would seem that a case alone should provide protection against screen shattering in most mundane falls also (again, barring protrusions).
So, what is your experience? Does anyone go screen protector only? Or case only? Have you had a screen break with either?
I have the incipio as well and go without a screen protector. I also have a belt holster to protect the phone from falling out my pocket. I am very anal with phones and have not dropped this one or my prior Android phones (I've dropped my Lumia 920 once but that just had a dent in the plastic housing). I've seen that video in which somebody tested the PH-1 with falls from different heights and know that the first thing that will break on it will be the screen under the right conditions. The rest of the phone is rock solid. That might be one problem that leads to cracks when it falls onto the corners (no dampening and direct energy transfer to the glass). I don't think a screen protector will do much in that case either.
that's my experience.
I'm totally enjoying this phone
cheers
I've just been using a screen protector and fitBAG leather sleeve. The Halo Gray has soft touch texture on the ceramic which makes it easier to grips than the shiny colors.
Sent from my Essential PH-1 using Tapatalk

Encased Rebel & GPEL Glass Screen Protector

I'm very OCD when it comes to my phones, I think anyone who'd join XDA probably is, but over my life as a musician & recording enthusiast I've learned that pampering & protecting my gear/kit/tech, etc. yields big dividends: longer life, higher resale value, better obsolescence rejection, etc.
On my smartphone I like a heavy duty case, cause I drop my phone more than I'd like to admit. Not from 6 feet on concrete drops, but plenty of sitting on the couch/edge of bed drowsy drops to the carpet below. I want a stout case also because it makes these increasingly paper thin devices easier to handle. After hunting one down I bought the Encased Rebel, which is basically a very good OtterBox clone, and for the screen protector, after buying several through trial and error, the GPEL Note 9 glass protector is working very well.
The hard part in using a really stout case with Samsung's curved screened phones is that after getting one with a raised lip around the screen (a feature you want), most glass screen protectors don't provide enough clearance to avoid rubbing against the raised lip of the case, causing it to peel off and eventually drop off. The GPEL protector, labeled case friendly, has a few millimeters taken away from the edge of the protector that allows the case to rest besides it with no contact.
I'm adding some pictures I posted in my Amazon reviews of these two products that show a bit of what I'm trying to describe, sorry they're not pro level by far. But for under $30 you can get a very good heavy-duty case & a screen protector that is performing great; no need for the increased sensitivity feature to be turned on & no separation or bubbles anywhere. Since there's no adhesive on the main center glass, just on the edges, in some light a slight rainbow effect can be seen, but it's nothing that interferes with the screens quality during normal viewing.
Just offering this duo as a suggestion, for when I got my Note 9 I wish there were a few more real world use descriptions about which heavy duty case worked well with what screen protector. Be cool...
JRSIV said:
I'm very OCD when it comes to my phones, I think anyone who'd join XDA probably is, but over my life as a musician & recording enthusiast I've learned that pampering & protecting my gear/kit/tech, etc. yields big dividends: longer life, higher resale value, better obsolescence rejection, etc.
On my smartphone I like a heavy duty case, cause I drop my phone more than I'd like to admit. Not from 6 feet on concrete drops, but plenty of sitting on the couch/edge of bed drowsy drops to the carpet below. I want a stout case also because it makes these increasingly paper thin devices easier to handle. After hunting one down I bought the Encased Rebel, which is basically a very good OtterBox clone, and for the screen protector, after buying several through trial and error, the GPEL Note 9 glass protector is working very well.
The hard part in using a really stout case with Samsung's curved screened phones is that after getting one with a raised lip around the screen (a feature you want), most glass screen protectors don't provide enough clearance to avoid rubbing against the raised lip of the case, causing it to peel off and eventually drop off. The GPEL protector, labeled case friendly, has a few millimeters taken away from the edge of the protector that allows the case to rest besides it with no contact.
I'm adding some pictures I posted in my Amazon reviews of these two products that show a bit of what I'm trying to describe, sorry they're not pro level by far. But for under $30 you can get a very good heavy-duty case & a screen protector that is performing great; no need for the increased sensitivity feature to be turned on & no separation or bubbles anywhere. Since there's no adhesive on the main center glass, just on the edges, in some light a slight rainbow effect can be seen, but it's nothing that interferes with the screens quality during normal viewing.
Just offering this duo as a suggestion, for when I got my Note 9 I wish there were a few more real world use descriptions about which heavy duty case worked well with what screen protector. Be cool...
Click to expand...
Click to collapse
Think I'm gonna get one of those screen protectors and see how it works with some optical adheasive.
Just wasted $53.00 on the ZAGG Elite (full adhesive) for the Note 9. This thing cracked just using the included squeegee trying to get the massive amount of bubbles out. Now, I have the pay ZAGG $9.99 just to ship me a replacement.
Might order the G-Pel and give it a try while waiting on ZAGG to send my replacement.
felloffthetruck said:
Just wasted $53.00 on the ZAGG Elite (full adhesive) for the Note 9. This thing cracked just using the included squeegee trying to get the massive amount of bubbles out. Now, I have the pay ZAGG $9.99 just to ship me a replacement.
Might order the G-Pel and give it a try while waiting on ZAGG to send my replacement.
Click to expand...
Click to collapse
Fuhhh...Well, let me put over GPEL here like I did in my Amazon review, I just didn't want to come off as some shill. When I first ordered the Note 9 glass protector from GPEL on Amazon it showed up in a rough looking package which, sure as sh#t, contained my 2 pack of protectors with a crack in one of them.
I emailed GPEL's customer support and within hours they emailed me a confirmation number of the replacement shipment. Really good customer service. I despise installing screen protectors: the plastic film type were hell with the air bubbles, the wet application protectors are such a hassle, worrying about stray dust, etc. The GPEL has this bracket that came with it that makes lining up the glass really t. The key is patience and having plenty of light. Good luck brother...
How bad are the oil slicks with this G-Pel?
felloffthetruck said:
How bad are the oil slicks with this G-Pel?
Click to expand...
Click to collapse
I've noticed it really depends on lighting for some reason. In my kitchen with lots of high watt LCD floods I can see a bit of a rainbow/oil slick but with the screen on and the brightness even as low as 35% or full blast it's pretty much a no issue.
But in other lighting in my house & at times outdoors, I can't see any rainbow/slick whatsoever. So I don't know; to me the only time I notice it or it bugs me is when the screen is off.
felloffthetruck said:
Just wasted $53.00 on the ZAGG Elite (full adhesive) for the Note 9. This thing cracked just using the included squeegee trying to get the massive amount of bubbles out. Now, I have the pay ZAGG $9.99 just to ship me a replacement.
Might order the G-Pel and give it a try while waiting on ZAGG to send my replacement.
Click to expand...
Click to collapse
I used one of those and I have a few notes on it.
-Adheasive is strong and super thick. Will add impact protection but being so this squeegeeing you have to be careful. Very easy to crack since the adhesive is so thick and soft.
- One the corner would not stick. Mesured it at work the top right corners adheasive was 50um thicker then the rest. This was from a bad batche. Replacement was fine.
-borderes cutinto the display. You will lose the very edge and have an annoying tiny thin line of light when you are in a dark room looking at it.
-soft adheasive when pressing on a corner you can see it ooze out. It returns to normal but this will collect dust at the edges. I'm
Really like to see that as a all clear glass and better guide on how to squeegee it. Mine did not break but I could feel flex. Requires a more gentle touch when doing this. And the time required to get the bubbles out is increased 5 fold because of this. But that soft adheasive add impact protection.
bignazpwns said:
I used one of those and I have a few notes on it.
-Adheasive is strong and super thick. Will add impact protection but being so this squeegeeing you have to be careful. Very easy to crack since the adhesive is so thick and soft.
- One the corner would not stick. Mesured it at work the top right corners adheasive was 50um thicker then the rest. This was from a bad batche. Replacement was fine.
-borderes cutinto the display. You will lose the very edge and have an annoying tiny thin line of light when you are in a dark room looking at it.
-soft adheasive when pressing on a corner you can see it ooze out. It returns to normal but this will collect dust at the edges. I'm
Really like to see that as a all clear glass and better guide on how to squeegee it. Mine did not break but I could feel flex. Requires a more gentle touch when doing this. And the time required to get the bubbles out is increased 5 fold because of this. But that soft adheasive add impact protection.
Click to expand...
Click to collapse
Thanks for this. This seems like a decent full adhesive protector though.
You got any tips to help me get the replacement on without cracking the thing?
I guess just be careful along the edges.
I had my first drop, from about 3 ft in the bathroom, on tile floor and it was fine. I HATE doing that, but no damage at all BUT...it looks like some dust worked it's way under the protector resting in the top middle, so must've jolted it enough for some dust to slip in. I dunno...
It's not the end of the world but goddamn, first world problems or not the whole screen protector gimmick is a pain in the a##! I know I keep hearing it from people I know " get the Dome" but I'm more worried about not installing it JUST so than the bread.
One other option I'm considering is a wrist strap. On some of the Ringke cases there is a hole pre made on the case, I guess if I kept using the Rebel I'd have to thread the lanyard deal through the SPen opening on that top lip area. I don't know...
JRSIV said:
I had my first drop, from about 3 ft in the bathroom, on tile floor and it was fine. I HATE doing that, but no damage at all BUT...it looks like some dust worked it's way under the protector resting in the top middle, so must've jolted it enough for some dust to slip in. I dunno...
It's not the end of the world but goddamn, first world problems or not the whole screen protector gimmick is a pain in the a##! I know I keep hearing it from people I know " get the Dome" but I'm more worried about not installing it JUST so than the bread.
One other option I'm considering is a wrist strap. On some of the Ringke cases there is a hole pre made on the case, I guess if I kept using the Rebel I'd have to thread the lanyard deal through the SPen opening on that top lip area. I don't know...
Click to expand...
Click to collapse
I don't use screen protectors myself,but,if I were in the same situation & the end result was merely a damaged screen protector,I'd consider myself fortunate & chalk one up in the win column.
Should my daily usage dictate that rollin' with one would be a wise decision,I'd definitely consider it.
The screen protector did its job,it saved your display & saved you from a costly repair.
If you were otherwise pleased w/the screen protector,I'd just get another,the price is certainly much less than a display replacement. (Perhaps pair it up w/a case-friendly Otterbox)
The only other option I'd look for is a screen protector that has some sort of free replacement,provided you're not on the hook for any fees (shipping/etc..).

Categories

Resources