Related
Doesn't somebody on here have one? Does it cover the entire screen or does it fall short? Seems like this might be the best one available right now...
masse1369 said:
Doesn't somebody on here have one? Does it cover the entire screen or does it fall short? Seems like this might be the best one available right now...
Click to expand...
Click to collapse
Sure just got yesterday. In fact it covers all of the glass portion of the screen. For reference there is no reduction in touch sensitivity with the protector in place.
While I think the cost is high, Martin Fields protectors have always been high quality. This is no exception.
Awesome news! Thanks for the reply!
Is this a thick, flexible protector like Zagg or PhantomSkinz? Also, have you noticed any change in proximity sensor sensitivity?
For reference, I have a PhantomSkinz currently, and when I'm in a dimly lit room and make/take a call, and pull the phone away from my face, it stays blacked out. I have to turn the light on to get it to wake up. I took the skin off, and it went back to normal.
Can you test this if you have the MF protector?
Also, can you please post pics of the screen protector in place? I, too, am wondering about the precision of the fitment. PhantomSkinz, Seidio, and others seem to have missed the mark and cut the protectors to short in width AND height.
Edit: Also looks like the include a piece for the camera cover on the back...? http://www.martinfields.com/US/prod...oogle_Nexus&modeln=Nexus One&prod_type=screen
uansari1 said:
Is this a thick, flexible protector like Zagg or PhantomSkinz? Also, have you noticed any change in proximity sensor sensitivity?
For reference, I have a PhantomSkinz currently, and when I'm in a dimly lit room and make/take a call, and pull the phone away from my face, it stays blacked out. I have to turn the light on to get it to wake up. I took the skin off, and it went back to normal.
Can you test this if you have the MF protector?
Also, can you please post pics of the screen protector in place? I, too, am wondering about the precision of the fitment. PhantomSkinz, Seidio, and others seem to have missed the mark and cut the protectors to short in width AND height.
Edit: Also looks like the include a piece for the camera cover on the back...?
Click to expand...
Click to collapse
I originally had a Skinomi protector and never really thought it bad, however I decided I'd try the Martin Fields one because I've never used a static protector.
Looks
I must say I'm thoroughly impressed by this protector! It fits perfectly; well almost perfectly, looking closely, you can still see the edge but it is almost negligible. If I had to gauge how big the space is... maybe about the thickness of a sheet of folder paper... if even that.
Scratching
The protector itself is what seems to be a hard plastic. I haven't scratched it yet (it claims to be HIGHLY scratch resistant) but it's still worrisome. I've done a fingernail test as of now and it has survived. It makes no indentation like the "self healing" skins so I'm guessing if it does get scratched, it stays scratched.
Application
The really cool thing I like most though is the static cling application. I managed to get dust on it before applying it X_X. Using scotch tape though, I was able to remove it with no problems! After about 30 minutes (I decided to be really OCD about the application) it was air bubble free and dust free. Oh, I also decided to try and running it under water to clean it but I found the tape a MUCH better way to clean it.
Removal
Also, be careful when removing the protector. It says to use tape and pull it off at corner. I tried using my fingernail on the camera protector and it kind of warped lol. No real problem though, just looks like an air bubble under it however it isn't over the lens so no problems taking pictures.
Clarity
As far as the proximity sensor goes, I thought it wasn't configured properly but after switching protectors, it works perfectly (so Skinomi = no good, Martin Fields = awesome). Same goes with the camera; it takes crystal clear photos.
Daily Use/Misc
The feel of this protector is very nice; I think due to the hard plastic material. It really does feel like nothing is there. Looks wise, it's glossy, reflects a clear image of me when looking at it, and is PERFECTLY transparent. If matte anti-glare is your thing, this isn't your screen protector. Good comparison is Macbook Pro anti-glare/glass; matte vs colors really popping off the screen.
Another issue I have with screen protectors is how well I can flick/scroll, this protector has my stamp of approval. As I said earlier, it feels very similar to glass and as such, scrolling is a breeze.
Smudging is also handled pretty nicely, much better than the "self healing" stuff. I find myself wiping the screen down with my shirt maybe once a day, if even that.
In Conclusion
So, sorry for the long post, but I tried to cover as many bases as possible. My last sentiments for this protector:
10/10
+
Easy application
Washable
Fits very well over screen, minimal non-coverage
Can remove dust from "sticky" side
Crystal Clear/Perfect proximity sensor
Feels Like there is nothing there
Highly scratch resistant? (personally, only did fingernail test so "?")
Somewhat smudge resistant
==
Camera protector
No anti-glare (your personal preference, move to + or -)
Pricy? (16.99 USD + 9.99 shipping)
-
Can be bent and will not fit properly afterwards
P.S. - Shipping was 10 dollars, Fed Ex overnight I think. It came within 2 days for sure though.
P.P.S. - I will post pictures when I find a better camera. I don't have one that zooms in close enough to see the edges and the glare kind of ruins the picture :\
Ugh, I want to put down for this sheild but the only thing holding me back is it's not whole body protection!
Thank you for your review! I doubt anyone will have a problem with as details are what matters
Also can you include some random pictures from the Nexus with the Martin Fields Protecter on the camera? I saw the one on their page but i'm always skeptical
It sucks ! had one and started pelling after a week, I keep my phone in my pocket.....now I have invisible shield and THAT one holds.
xavina said:
I originally had a Skinomi protector and never really thought it bad, however I decided I'd try the Martin Fields one because I've never used a static protector.
Looks
I must say I'm thoroughly impressed by this protector! It fits perfectly; well almost perfectly, looking closely, you can still see the edge but it is almost negligible. If I had to gauge how big the space is... maybe about the thickness of a sheet of folder paper... if even that.
Scratching
The protector itself is what seems to be a hard plastic. I haven't scratched it yet (it claims to be HIGHLY scratch resistant) but it's still worrisome. I've done a fingernail test as of now and it has survived. It makes no indentation like the "self healing" skins so I'm guessing if it does get scratched, it stays scratched.
Application
The really cool thing I like most though is the static cling application. I managed to get dust on it before applying it X_X. Using scotch tape though, I was able to remove it with no problems! After about 30 minutes (I decided to be really OCD about the application) it was air bubble free and dust free. Oh, I also decided to try and running it under water to clean it but I found the tape a MUCH better way to clean it.
Removal
Also, be careful when removing the protector. It says to use tape and pull it off at corner. I tried using my fingernail on the camera protector and it kind of warped lol. No real problem though, just looks like an air bubble under it however it isn't over the lens so no problems taking pictures.
Clarity
As far as the proximity sensor goes, I thought it wasn't configured properly but after switching protectors, it works perfectly (so Skinomi = no good, Martin Fields = awesome). Same goes with the camera; it takes crystal clear photos.
Daily Use/Misc
The feel of this protector is very nice; I think due to the hard plastic material. It really does feel like nothing is there. Looks wise, it's glossy, reflects a clear image of me when looking at it, and is PERFECTLY transparent. If matte anti-glare is your thing, this isn't your screen protector. Good comparison is Macbook Pro anti-glare/glass; matte vs colors really popping off the screen.
Another issue I have with screen protectors is how well I can flick/scroll, this protector has my stamp of approval. As I said earlier, it feels very similar to glass and as such, scrolling is a breeze.
Smudging is also handled pretty nicely, much better than the "self healing" stuff. I find myself wiping the screen down with my shirt maybe once a day, if even that.
In Conclusion
So, sorry for the long post, but I tried to cover as many bases as possible. My last sentiments for this protector:
10/10
+
Easy application
Washable
Fits very well over screen, minimal non-coverage
Can remove dust from "sticky" side
Crystal Clear/Perfect proximity sensor
Feels Like there is nothing there
Highly scratch resistant? (personally, only did fingernail test so "?")
Somewhat smudge resistant
==
Camera protector
No anti-glare (your personal preference, move to + or -)
Pricy? (16.99 USD + 9.99 shipping)
-
Can be bent and will not fit properly afterwards
P.S. - Shipping was 10 dollars, Fed Ex overnight I think. It came within 2 days for sure though.
P.P.S. - I will post pictures when I find a better camera. I don't have one that zooms in close enough to see the edges and the glare kind of ruins the picture :\
Click to expand...
Click to collapse
Thanks so much for your thorough review. Two things though... first, can you please take a pic of the screen for us, especially showing how the fitment is? I believe you when you say it's just barely short, but am just curious. Second, I'm glad to know I'm not the only one who noticed a change in the proximity sensor with these thicker skins.
I'll almost certainly be ordering this product it looks like. One more thing... does it have a guarantee or anything?
Edit: Found this review with installation tips... seems to be just like a Seidio screen protector.
http://the-gadgeteer.com/2004/01/05/martin_fields_overlay_plus_pda_screen_protector_review_/
I've attached a few pictures of the phone and a few taken from the Nexus One
Screen protector
I tried to get as close as possible to the screen to show the edges (Don't mind the Skinomi skin lol).
The one of the camera protector seems clear, but there is one section that is discolored to the rest, that'll be the place I bent lol (bottom half when looking at the picture I took).
Pictures taken from the Phone
There are 2 pictures taken with the phone; one normal and one using the zoom feature.
The picture of the plants are closer, in mid/low light.
The picture of the mountain is further away and in bright light. It's not exactly clear because it's rainy/misty today, sorry for that one.
The last pair is of a magazine in little-no light using the flash as the only source of light.
Warranty
Regarding the warranty, I didn't see mention of anything so I can't really say. If I find anything, I'll be sure to post it.
Thickness
To me, it seems slimmer than the Skinomi Skin because I can feel it almost flush to the metal but it might be my imagination.
I can only upload 8 at a time, so I'll post the others in another post.
These are the remaining photos I took from the phone.
Wow... the fitment looks perfect man. Thanks very much for the pics. Still waiting to hear from Seidio, but this is the front runner. I'll order a new one this week. By the way, I'm jealous that you live near mountains.
Haha, yeah, living in Hawaii has its perks. Wish I could have taken more pictures but I just figured I'd get something posted asap.
If anyone would like to see any specific pictures/angles, I'd be happy to oblige. Like I said though, the camera I have isn't exactly great so quality is kind of lacking.
I'll post again later though seeing how someone had an issue with the protector peeling. I also put my phone into my pocket, so we'll see if it collects lint, peels, etc. So far, my Skinomi seems to be acting like a lint magnet so that may skew results lol.
One last thing of note, I've been hearing word that Martin Fields uses a mild adhesive. With this protector, I guess it's possible that a really mild adhesive is used but I know for sure it's static; depending on which side I'd place a strip of tape close to it, it would actually pull or push the tape in a certain direction. It didn't really feel sticky but I could definitely tell which side needed to be placed on screen; it wasn't smooth on one side.
I have an Martin Fields protector installed on my N1 as well. I'm pleased with it.
I agree with the review here, but I'd like to add that these things do get scratched quite easily. I have one on my G1 and it looks like sh*t after 6 months. It's scuffed and scratched like crazy. Since the MF protectors are not cheap, it's annoying to replace them, but they do their job quite well. Note that I keep my phone in my pocket, often rubbing against keys and coins.
I've had a MF protector on my digital camera for six months and it still looks new (and invisible.)
I always buy two-packs but I wish I could get 10-packs.
Hopefully they'll be available from vendors in the US soon, at lower prices and with cheaper shipping.
tehkseven's review of martin fields vs dcmugen (generic)
Bicster_ said:
I have an Martin Fields protector installed on my N1 as well. I'm pleased with it.
I agree with the review here, but I'd like to add that these things do get scratched quite easily. I have one on my G1 and it looks like sh*t after 6 months. It's scuffed and scratched like crazy. Since the MF protectors are not cheap, it's annoying to replace them, but they do their job quite well. Note that I keep my phone in my pocket, often rubbing against keys and coins.
I've had a MF protector on my digital camera for six months and it still looks new (and invisible.)
I always buy two-packs but I wish I could get 10-packs.
Hopefully they'll be available from vendors in the US soon, at lower prices and with cheaper shipping.
Click to expand...
Click to collapse
This sounds to be the exact same as dcmugen's screen protectors. It confirms the findings of tehkseven's reviews.
I really dont understand why anyone would pay five to ten times as much as one would need to... you all need to try out dcmugen's products because I really haven't found a seller with better quality to price ratio. Search 'epikcase' on eBay.
laughter95 said:
This sounds to be the exact same as dcmugen's screen protectors. It confirms the findings of tehkseven's reviews.
I really dont understand why anyone would pay five to ten times as much as one would need to... you all need to try out dcmugen's products because I really haven't found a seller with better quality to price ratio. Search 'epikcase' on eBay.
Click to expand...
Click to collapse
Link to dcmugen?
uansari1 said:
Link to dcmugen?
Click to expand...
Click to collapse
His ebay seller ID is dcmugen88
Thanks, will order some dcmugen88 product. The material sounds the same. His 5 pack is cheap! If it works ok I'll have a new protector every month instead of every year, lol.
I too just ordered (2) of the Anti-Glare ones from dcmugen for $4.49 shipped.
I will report back once I receive it and will give a review.
Just a follow up review, now that I've had the protector on for a little while.
I usually keep my phone in my shirt pocket but I decided to mix it up and
Throw it into my pants pocket (with keys) for the purpose of this review.
Looks
Still very impressed by the looks of the protector. Nothing has changed that
I can tell; no peeling effect, no lint collection (again, could be due to skin
protector lint collection lol).
Scratching
Haha, as mentioned by another reader, this protector does indeed scratch.
Now, here's the funny thing: It didn't scratch due to my keys, but rather my
cleaning cloth.
Some cleaning cloths burn the edges and while I'm usually
careful with those, I figured if this thing has been taking my keys, it should
be able to hold out; not the case.
It's a very deep scratch, so much so that I can feel it under my finger.
The cool thing is though, I cannot see the scratch under normal circumstances.
I can't feel it under normal use either.
Seriously though, I can't even see the scratch under daily use.
Only by flashing direct light can I see the scratch, and by moving my finger
slowly over it can I feel it.
Note: scratch is maybe 1/8th of an inch long.
Clarity
Screen still displays beautifully and pictures are still awesome.
Cleanliness
Still remains pretty clean throughout a few days, only wiping it down every
two or three days. Pretty darn good I guess.
Conclusion
While I'm sort of sick that it got scratched, it's so unnoticable that I haven't
felt the need to replace it. Don't know how long it will last, but if ever
I decide to replace it, I'll post again and give the reasons why.
I'm still quite pleased with this protector and I don't think I'll ever use
anything besides these static cling protectors (be it Martin Fields or another).
hey Xavina. Are you near kea'ahala pl? looks like the pictures are taken from my old house almost haha.
Nevermind. But the bkgrnd is close.
[/IMG]
My old driveway. Anyways off topic ... carry on.
Just applied the invisibleshield and im not too impressed.
First, the front and more so the back covers are too small and the corners of the phone is not covered. Second, the home key cover and camera lens cover are too big, so I avoided the home button cover and stuck the camera lens on by taking off the back cover. Third and finally the tacky feel means its a fingerprint and oil magnet, as I have sweaty hands this is especially annoying.
On the plus side it was relatively easy to put on and remove the bubbles.
sounds like you got the Full Body "Easy Install" version the Full Body "Maximum protection" version would have covered the corners, and have extended wings that goes up the sides.
same here i've a oily face / fingers, Zagg will not work for me as i've posted on other topic, I'll prefer the regular 3M PET screen protectors + a Gel case instead
Does it make the phone any less slippy to hold?
Ollie2 said:
Does it make the phone any less slippy to hold?
Click to expand...
Click to collapse
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
would u mind to put some pics ???
i've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
i had the invisi shield on my touch hd, so the first thing i did when i got home from getting my shiny new SGS was to order one, still not arrived and thats with 2-3 day delivery. i did the right thing and ordered the full cover as it was the same price as the easy install version, i will post pics when i have recieved it and have it done.
as for gel cases i have one of them on order also as it has done a wonderfull job of protecting my touch hd (till i drove over it)
i gave up on the zagg, samsung is release nice fashion faceplates for the SGS
and i'm already using those nice gel cases + screen protector, that's more than enough protection for the phone.
out of the box, the phone is already super strong, and anti scratch, did you see the video?
it will only break the screen if you drop it from a 1.5 m high
it may be anti scratch but ive scratched the proximity sensor area already so hopefully the shield will stop other scratches. I would use a gel cover but the shield really doesnt add anything to the thickness, while the cover would.
I get some pics up as soon as I can get hold of a camera.
shohid1234 said:
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
Click to expand...
Click to collapse
Thanks for the reply.
I've actually bought a silicone case and a screen protector for it and it's made it much more manageable and easier to hold and saved the phone when I dropped it the other day.
j_h3000 said:
would u mind to put some pics ???
I've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
Click to expand...
Click to collapse
1+
1+
1+
what about touch sensitivity?
I installed an invisibleShield as soon as the phone arrived. It's a pain in the ass to install as usual, and I was not able to make the top two corners look good. They've already started to peel off but I guess it's going to take a while before the back has to be replaced so I'm not going to worry about it.
Is it worth it? I'd say yes, even after a year you'll still have a phone that looks brand new. Now, the edges around the phone will probably get a couple of scratches because unlike the shield for the iPhone this one does not cover the chrome/metal/whatever bezel. Not a big deal if you ask me.
So, touch sensitivity? It's good. It's just as sensitive with the shield as without. Your fingers won't glide as well across the surface tho. One more thing which you'll see in the pictures; Dust usually collects around the edges of the shield, there is not much you can do about that. Trust me, the dust looks much worse in a picture than it does irl. You can barely see it.
Pictures:
Front:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0003.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0004.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0005.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0006.JPG
Back:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0008.JPG
I ordered the full body shield as it was half price.
I just used cheap 6 for 1 ebay screen protector as this one has too much of a grip.
As for the back, as said above the top corners just will not fit completely and lift just a tiny bit at the tips.
Getting tiny bubble out results in the orange peel effect. This is because the shield is slightly rubbery and streches as you force out the bubbles.
IMO the shield protects very well, but I cant imagine ever getting the 'perfect' look with it on.
Its far from invisible, due to slight orange peel, minute bubbles which will only turn into more orange peel should I try to force them out.
If I ever buy one again, it will have graphics on it(they have those for iphone etc, perhaps the sgs is too new..) as then the slight imperfections would be less obvious.
Id rate the item 6/10. It doesn't protect the bezel or extreme corners and doesn't look great where it does protect.
thx for the pics. i got the same edge problems on my old iphone too. the zagg shield is ordered, i should get it next week.
MagicOnline said:
i should get it next week.
Click to expand...
Click to collapse
Don't count on it. I ordered mine on the 16th and I still don't have it (on the 25th).
i knew it would not cover the corners properly, it looks ugly when there are little pieces of plastic cropping out of the phone.
For the back I think the Zagg sheild is brilliant, almost full cover and invisible, with no extra bulk, and a little bit more grip.
For the front, I probably prefer a normal screen protector. My wife has a $1 screen protector from flea-baythat is much better to use (although needs more regular cleaning). The zagg is a little tacky meaning your finger doesn't slide as easily (not ideal for Swype).
Fitting:
I gotta confess that I didn't get the back perfect, but mainly because Ifit it in a dimly lit room, the cover edges are hard to see without bright light. I did get the corner 90% by using glad wrap (plastic wrap) tightly pulled over the corners and left overnight (saw this on a youtube demo video).
Also I once helped a colleague who fits 3m window film for a living. I noticed that he used a lot of liquid, so for the front I made up some more liquid, enough to refill the bottle Zagg provide. I used the whole bottle on the front, making fitting much easier, you can just slide tje cover around until it's perfect, then you just push out all the liquid. Using more liquid also seemed to help alleviate any bubbles. Also for the front I used a very bright light (480 lumens bike light) which made it much easier to see exactly where the edges were.
I'm also hoping that Zagg bring out the coloured/patterned backs, which in an email to me they said they would, then I'll use a regular screen protector for the front.
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
I just remixed a new solution: a couple of drops of baby shampoo with water in the bottle supplied. (I think you can use other stuff like washing detergent, but don't take my word, use google (3m film))
From the 3m website:
"3M™ Scotchtint™ Films are professionally applied by skilled, well-trained authorized 3M Dealers. Almost all of our films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges."
same here
liquid and electronics don't mix
i don't like the idea of having anything wet near my device.
WiseDuck said:
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
Click to expand...
Click to collapse
I just received my Case-mate barely there case today from play.com & thought I'd give a mini review ago.
It comes in a smartly packaged box, upon opening the box you have in your hand a moulded abs plastic shell & a sealed packet containing a screen protector, micro fibre cloth & a piece of soft card.
The shell is easy enough to put on, it's just a simple push to fit design that works really well.
The actual fit of the Case-Mate barely there is superb with the power & volume buttons being easy to access as are the mini usb port & 3.5mm socket while also giving the camera & speaker unobstructed access.
I didn't fit the screen protector, well seeing as Samsung used gorilla glass & the fact that a screen protector isn't going to do much good if you drop it face down (I've seen a few on here with cracked screens) & that someone can do this to one with no ill effect then I see no need.
The Case-Mate barely there itself was purchased to improve the grip of the phone which as we all know is a little slippery & protect the rear cover from getting scratched & knocked, well the Case-Mate barely there does improve my hold on the Galaxy S but not like I was hoping it would .
The case wraps around the rear of the phone following the Galaxy S contours like a second skin, I can see this case giving great protection to the corners & rear of the phone.
So in all a well made case that fit's superbly, gives easy access to the various button & connectors whilst saving corners & back cover from scratching & knocks. And like it's name implies you'll barely notice it's on the phone.
My only gripe is it feels a little to silky for my liking, I was hoping it would have a rubberised back for improved grip something a little like a silicon case feel.
nice review. i just ordered mine, so it's gonna be a long wait before i get it.
Thanks for the review. I also purchased mine, it was shipped today, can't wait to get it.
I know what you mean about the feel of the case. I have one on my ipod touch but only because I couldn't get a Flexishield case for it. I have a Flexishield on my Desire and am about to get one for the SGS. For me it has a better feel to it and fees less slippery.
Great review, I ordered mine about 2 weeks ago. Hopefully it comes in soon
Anyone has pictures of the silver one ? I ordrered it but it won't be there before three days or so.
Very nice case
jonni3 said:
I didn't fit the screen protector, well seeing as Samsung used gorilla glass & the fact that a screen protector isn't going to do much good if you drop it face down (I've seen a few on here with cracked screens) & that someone can do this to one with no ill effect then I see no need.
Click to expand...
Click to collapse
Seriously that keything doesn't mean crap. You think it's the BIG things in your pockets that do the scratches? It's not. Take any sandpaper and swipe ONE time over the glass of the SGS and you'll have tons of scratches, you don't even have to press very hard. It's generally not your keys, a screw or a screwdriver in your pocket that cause scratches, it's tiny grit that does. Every time you wipe the screen you risk scratching it if there's the wrong kind of dirt on either the screen or the cloth you use. That's why people can be however careful and still get scratches, just read around, you'll see. Everyone doesn't bull**** you when they tell you they take good care of their phone.
Ok recieve my silver casemate, some low res pictures here. I'll take very good ones later when I get back a hold of my APN charger.
http://picasaweb.google.com/114505993397088135290/CasemateBarelyThereSilver#5524273441974319986
Anyway just imagine OP's picture with that kind of grey/black/silver reflections.
It looks kinda glossy, how is the feel of the case?
I've noticed with mine it's started to feel a bit more rubberized now it's been handled.
@ mickeko
About the screen protector you have a valid point & I am now going to have to rethink not having one.
Sent from my GT-I9000 using XDA App
Yea the screen protector looks ugly ^^ it breaks the harmony of the phone in the area around the front facing camera, you can clearly see the protector cutout that is quite ugly. You do not have this problem on silicon cases as they often cover the side cutout. However I would never go without a screen protector without a pouch, the dust level of my pockets are way too random to take the risk of the godamn dust scratches (the silver case also has that little problem, but they are only visible if you search for them micro scratches of doom).
The case feels good, no creaks.
It's not very glossy, or at least I won't call that glossy, in fact it acts like a mirror if you face it at 90° incidence. But if you tilt it even by 5/10 degrees in mid light conditions, it takes a very nice and not glossy dark/grey silver tint similar to the one of the original chrome bezel of the SGS. They both blend very very well. It is really a BARELY THERE experience. very thin, very stylish. Nearly to the level of a naked iphone 4.
Sounds pretty good & seems like your more than happy with it
These case's really complement the phones shape & add very little to the overall dimensions, know what you mean about the screen protector it's not really that attractive, I'm looking for one that covers the entire screen from edge to edge so it doesn't notice.
Looking at your pic's on the pc & it does seem to have that smoked chrome effect like the bezel on the SGS
Indeed but the SGS bezel is a little more greenish/blueish in tint but it is barely noticable (you had to get me to check it closely in white light to notice it), both have the same reflection behaviour however which is why it blends very nicely.
I also notice a very faint rainbowish halo (probably there from transparent coating material used over the silver layer) in the backplate reflections, well, it's kind of cool actually.
My barely there case just came in, I must say very nice case.
My girlfriend has a cheap ebay one, and this is definitely worth the price.
Good job case-mate
epicfailguy2 said:
Anyone has pictures of the silver one ? I ordrered it but it won't be there before three days or so.
Click to expand...
Click to collapse
Just a heads up. I had a metallic 'silver' case-mate barely there on my Desire and it murdered the 3G signal strength. Swapped it for the plain black and it was fine. Dunno if you have that issue with the SGS.
Signal is the same, didn't notice any change 4bars in town.
Just picked mine up today and couldn't be happier with it. Slides in and out of my pocket fairly easily and adds some structural support to the phone which you could argue is a little lacking.
So far I'm very happy with it; I was quite skeptical as I was a long time iPhone (indestructible 2G model) owner and have never used a case.
Haven't had a chance to add the screen protector.
Told you I was going to make it up for the crap ass webcam pictures
http://il.youtube.com/watch?v=OHLglrlRsrw
Where did you guys purchase this at?
EarlZ said:
Where did you guys purchase this at?
Click to expand...
Click to collapse
Asking about Barely there case?
http://shop.ebay.com/?_from=R40&_tr...rely+there+galaxy+s&_sacat=See-All-Categories
Although I see there are no black ones or metallic at the moment, only pink
Just got mine two days ago and must say this is the perfect case for my SGS, could be a little less slippery, but still definitely worth it's money.
Hi all
After getting very frustrated at not being out to take my new toy out because of a lack of case and protector, I decided to get a quick solution to tide me over.
In the main I'm pretty happy.
I got a Samsung Protective Cover + Mid Silver ... which is really black ... very odd. Supply seems very inconsistent with all cases in the UK, including these. I got mine at Expansys :
http://www.expansys.com/samsung-pro..._productfeed&gclid=CKv6iIf08sECFbPJtAodOXoA8Q
Never really trusted them as a supplier and like many used Clove who have been excellent since Psion days. Sadly Clove just weren't getting stock of much.
Happily nothing went wrong ... ordered Saturday and it arrived Monday. Also got Samsung's own Note 4 screen protectors - I was just so fed up with all this will they / won't they fit stuff on line for every protector out there and couldn't wait.
Anyway ... the case .. like others have reported is great for what it is. The inside of the back is properly moulded near the camera ... all the cut outs are good ... and, whilst it doesn't impact me, the mic slot on the left is extended so it will work with Verizon as well. The Note 4 has a nice lip around the top protecting the screen in face down position. Fit is tight, but I don't think tight like the UAG which I was going to get. You can get it out fairly easily but it does take a little effort unlike the all rubber / gel cases. I'd say it is the best compromise as it doesn't come away as you take out of our pocket. Again, as others have said, it provides good normal use protection around all sides and the back (big lip around the camera area as well) but I doubt it would help with many drops on to a hard surface. Heart / Oxygen sensor pretty much unaffected by the case which is cool. It is slightly more substantial than a gel case, thereby adding a little more bulk, but for that tiny bit of extra bulk, you get a lot more confidence in the protection. Unlike a UAG etc, it doesn't make the phone appreciably bigger in your hand and doesn't stick or struggle going in or coming out of a normal trouser pocket. It even fits in a shirt pocket easily with just the top 2cm sticking out. This is really positive, given how big the phone is already. Finger print sensor works 100% with me still but your finger does obviously touch the bottom lip as you draw down ... not enough to move it out of the way though. I do have my finger recorded straight down and sides ways down at different angles which I suspect is why it is so forgiving with me.
The screen protector is of a good quality. I got a Media Devil from my work iPhone6 which was surprisingly thin in comparison to the older ones I had on my iPads. Prior to this I used Writeshields on my WM devices like the HD2 and would say the Samsung one is of a similar quality and thickness. I don't think it has a oil resistant layer ... but it is fine as a stop gap. It is designed to cover the display area and perhaps .5mm on either side and it looks like it goes slightly higher up and down that they others I've seen on this forum. There is a .2mm halo at the top on either side. I probably have a tiny diagonal placement top left to bottom right ... only really noticeable when looking at how it brackets the home button. You get two protectors and I suspect if you did get perfectly true, you MAY not get the halo but given I got on with no dust at all, I will leave a while. Feel wise, I am puzzled that some don't like the feel of the native screen ... I've never had a better one ... including my iPADs which I don't use a protector any more (last two were iPAD3 and Air2). You don't feel any real difference with the protector with finders but there is a slight sense with the pen that there is a little more resistance. Having said that, it is slight and with very light touch using the pen you don't get breaks in writing or drawing ... so pretty perfect.
Like many, I was waiting for a Maverick (or UAG Folio or Noreve or Piel Frama) and tempered glass protector but got fed up waiting. To my surprise, I'm very happy with the above two and may well stick with for several months. Ultimately, I'd rather have a thin leather book case of the UAG folio ... but will wait to see reviews and hopefully some sign of a working glass protector.
Paul.
This was the route I was going to go, but having the phone naked for a week now will make it hard. I think I will still get these, I think the screen protector is the most important part as everything else if scratched can be hidden by a case.
I'm very OCD when it comes to my phones, I think anyone who'd join XDA probably is, but over my life as a musician & recording enthusiast I've learned that pampering & protecting my gear/kit/tech, etc. yields big dividends: longer life, higher resale value, better obsolescence rejection, etc.
On my smartphone I like a heavy duty case, cause I drop my phone more than I'd like to admit. Not from 6 feet on concrete drops, but plenty of sitting on the couch/edge of bed drowsy drops to the carpet below. I want a stout case also because it makes these increasingly paper thin devices easier to handle. After hunting one down I bought the Encased Rebel, which is basically a very good OtterBox clone, and for the screen protector, after buying several through trial and error, the GPEL Note 9 glass protector is working very well.
The hard part in using a really stout case with Samsung's curved screened phones is that after getting one with a raised lip around the screen (a feature you want), most glass screen protectors don't provide enough clearance to avoid rubbing against the raised lip of the case, causing it to peel off and eventually drop off. The GPEL protector, labeled case friendly, has a few millimeters taken away from the edge of the protector that allows the case to rest besides it with no contact.
I'm adding some pictures I posted in my Amazon reviews of these two products that show a bit of what I'm trying to describe, sorry they're not pro level by far. But for under $30 you can get a very good heavy-duty case & a screen protector that is performing great; no need for the increased sensitivity feature to be turned on & no separation or bubbles anywhere. Since there's no adhesive on the main center glass, just on the edges, in some light a slight rainbow effect can be seen, but it's nothing that interferes with the screens quality during normal viewing.
Just offering this duo as a suggestion, for when I got my Note 9 I wish there were a few more real world use descriptions about which heavy duty case worked well with what screen protector. Be cool...
JRSIV said:
I'm very OCD when it comes to my phones, I think anyone who'd join XDA probably is, but over my life as a musician & recording enthusiast I've learned that pampering & protecting my gear/kit/tech, etc. yields big dividends: longer life, higher resale value, better obsolescence rejection, etc.
On my smartphone I like a heavy duty case, cause I drop my phone more than I'd like to admit. Not from 6 feet on concrete drops, but plenty of sitting on the couch/edge of bed drowsy drops to the carpet below. I want a stout case also because it makes these increasingly paper thin devices easier to handle. After hunting one down I bought the Encased Rebel, which is basically a very good OtterBox clone, and for the screen protector, after buying several through trial and error, the GPEL Note 9 glass protector is working very well.
The hard part in using a really stout case with Samsung's curved screened phones is that after getting one with a raised lip around the screen (a feature you want), most glass screen protectors don't provide enough clearance to avoid rubbing against the raised lip of the case, causing it to peel off and eventually drop off. The GPEL protector, labeled case friendly, has a few millimeters taken away from the edge of the protector that allows the case to rest besides it with no contact.
I'm adding some pictures I posted in my Amazon reviews of these two products that show a bit of what I'm trying to describe, sorry they're not pro level by far. But for under $30 you can get a very good heavy-duty case & a screen protector that is performing great; no need for the increased sensitivity feature to be turned on & no separation or bubbles anywhere. Since there's no adhesive on the main center glass, just on the edges, in some light a slight rainbow effect can be seen, but it's nothing that interferes with the screens quality during normal viewing.
Just offering this duo as a suggestion, for when I got my Note 9 I wish there were a few more real world use descriptions about which heavy duty case worked well with what screen protector. Be cool...
Click to expand...
Click to collapse
Think I'm gonna get one of those screen protectors and see how it works with some optical adheasive.
Just wasted $53.00 on the ZAGG Elite (full adhesive) for the Note 9. This thing cracked just using the included squeegee trying to get the massive amount of bubbles out. Now, I have the pay ZAGG $9.99 just to ship me a replacement.
Might order the G-Pel and give it a try while waiting on ZAGG to send my replacement.
felloffthetruck said:
Just wasted $53.00 on the ZAGG Elite (full adhesive) for the Note 9. This thing cracked just using the included squeegee trying to get the massive amount of bubbles out. Now, I have the pay ZAGG $9.99 just to ship me a replacement.
Might order the G-Pel and give it a try while waiting on ZAGG to send my replacement.
Click to expand...
Click to collapse
Fuhhh...Well, let me put over GPEL here like I did in my Amazon review, I just didn't want to come off as some shill. When I first ordered the Note 9 glass protector from GPEL on Amazon it showed up in a rough looking package which, sure as sh#t, contained my 2 pack of protectors with a crack in one of them.
I emailed GPEL's customer support and within hours they emailed me a confirmation number of the replacement shipment. Really good customer service. I despise installing screen protectors: the plastic film type were hell with the air bubbles, the wet application protectors are such a hassle, worrying about stray dust, etc. The GPEL has this bracket that came with it that makes lining up the glass really t. The key is patience and having plenty of light. Good luck brother...
How bad are the oil slicks with this G-Pel?
felloffthetruck said:
How bad are the oil slicks with this G-Pel?
Click to expand...
Click to collapse
I've noticed it really depends on lighting for some reason. In my kitchen with lots of high watt LCD floods I can see a bit of a rainbow/oil slick but with the screen on and the brightness even as low as 35% or full blast it's pretty much a no issue.
But in other lighting in my house & at times outdoors, I can't see any rainbow/slick whatsoever. So I don't know; to me the only time I notice it or it bugs me is when the screen is off.
felloffthetruck said:
Just wasted $53.00 on the ZAGG Elite (full adhesive) for the Note 9. This thing cracked just using the included squeegee trying to get the massive amount of bubbles out. Now, I have the pay ZAGG $9.99 just to ship me a replacement.
Might order the G-Pel and give it a try while waiting on ZAGG to send my replacement.
Click to expand...
Click to collapse
I used one of those and I have a few notes on it.
-Adheasive is strong and super thick. Will add impact protection but being so this squeegeeing you have to be careful. Very easy to crack since the adhesive is so thick and soft.
- One the corner would not stick. Mesured it at work the top right corners adheasive was 50um thicker then the rest. This was from a bad batche. Replacement was fine.
-borderes cutinto the display. You will lose the very edge and have an annoying tiny thin line of light when you are in a dark room looking at it.
-soft adheasive when pressing on a corner you can see it ooze out. It returns to normal but this will collect dust at the edges. I'm
Really like to see that as a all clear glass and better guide on how to squeegee it. Mine did not break but I could feel flex. Requires a more gentle touch when doing this. And the time required to get the bubbles out is increased 5 fold because of this. But that soft adheasive add impact protection.
bignazpwns said:
I used one of those and I have a few notes on it.
-Adheasive is strong and super thick. Will add impact protection but being so this squeegeeing you have to be careful. Very easy to crack since the adhesive is so thick and soft.
- One the corner would not stick. Mesured it at work the top right corners adheasive was 50um thicker then the rest. This was from a bad batche. Replacement was fine.
-borderes cutinto the display. You will lose the very edge and have an annoying tiny thin line of light when you are in a dark room looking at it.
-soft adheasive when pressing on a corner you can see it ooze out. It returns to normal but this will collect dust at the edges. I'm
Really like to see that as a all clear glass and better guide on how to squeegee it. Mine did not break but I could feel flex. Requires a more gentle touch when doing this. And the time required to get the bubbles out is increased 5 fold because of this. But that soft adheasive add impact protection.
Click to expand...
Click to collapse
Thanks for this. This seems like a decent full adhesive protector though.
You got any tips to help me get the replacement on without cracking the thing?
I guess just be careful along the edges.
I had my first drop, from about 3 ft in the bathroom, on tile floor and it was fine. I HATE doing that, but no damage at all BUT...it looks like some dust worked it's way under the protector resting in the top middle, so must've jolted it enough for some dust to slip in. I dunno...
It's not the end of the world but goddamn, first world problems or not the whole screen protector gimmick is a pain in the a##! I know I keep hearing it from people I know " get the Dome" but I'm more worried about not installing it JUST so than the bread.
One other option I'm considering is a wrist strap. On some of the Ringke cases there is a hole pre made on the case, I guess if I kept using the Rebel I'd have to thread the lanyard deal through the SPen opening on that top lip area. I don't know...
JRSIV said:
I had my first drop, from about 3 ft in the bathroom, on tile floor and it was fine. I HATE doing that, but no damage at all BUT...it looks like some dust worked it's way under the protector resting in the top middle, so must've jolted it enough for some dust to slip in. I dunno...
It's not the end of the world but goddamn, first world problems or not the whole screen protector gimmick is a pain in the a##! I know I keep hearing it from people I know " get the Dome" but I'm more worried about not installing it JUST so than the bread.
One other option I'm considering is a wrist strap. On some of the Ringke cases there is a hole pre made on the case, I guess if I kept using the Rebel I'd have to thread the lanyard deal through the SPen opening on that top lip area. I don't know...
Click to expand...
Click to collapse
I don't use screen protectors myself,but,if I were in the same situation & the end result was merely a damaged screen protector,I'd consider myself fortunate & chalk one up in the win column.
Should my daily usage dictate that rollin' with one would be a wise decision,I'd definitely consider it.
The screen protector did its job,it saved your display & saved you from a costly repair.
If you were otherwise pleased w/the screen protector,I'd just get another,the price is certainly much less than a display replacement. (Perhaps pair it up w/a case-friendly Otterbox)
The only other option I'd look for is a screen protector that has some sort of free replacement,provided you're not on the hook for any fees (shipping/etc..).