Related
HI,
The otherday i was cleaning and changing the case of my Magician.
I made a wrong move and pulled out the camera, lucky the camera was connected by what it looks like a socket.
So yea, im just wondering, would it be possible to buy another camera module, coz the camera is just plain crap.
im just looking at ways of improving my magician lol.
whitemoo.
if its a standard conection id say yes i did a cam change on an old nec e808y it worked so i cant see why not id head off to maplin and pick up a cam let me know how you get on or if you get stuck
Actually the Magician's camera is a bit... weird. It hangs off by a thin parallel connection instead of being soldered to the board, which I don't think many other cameras do. I dunno, I've given up all hope on that terrible camera
ive just about given up hope to, im only wondering cause my real digicamera is in repair, and im itching to take photo's.
I was looking at aftermarket parts for camera phones, and saw camera modules which looked like they had similar connections, so there might be hope.
When i do get my real digicamera back from repair ill take some high res shots of the connector, and aftermarket case's for reference on this forum.
Whitemoo.
yer get some shots of where it connects to the phone as well
Can anyone give me a detailed description of how to change the case of O2 mini. I have tried to open the case many times but failed. iam afraid i might void the warranty.
Hi maharishi_b,
ill be giving my detailed photo's of the inside of the xda mini soon, and photo's of aftermarket cases i bought off ebay, compared to the original. This will all come soon.
you will need a plastic case opener similar to what they use to open the ipod's, and a torx screwdriver.
Theres a post with pictures on how to open it, but i cant seem to find it.
Whitemoo.
Torx size 6 to be precise. Stupid seller who sold me my casing shipped me a size 5, and I almost made the bottom two screws round before I realised.
Also I dont use the plastic case opener - I find a thin metal thing to be more effective, though I dont know what its called - it holds the binding thing... nevermind.
I am trying to take apart my htc pure. I cannot get the part down by the stylis to release. there is a small body part still in place after removing the battery cover and the torx screws. has anyone taken one of these apart willing to give me a hint?
thanks in advance for any clues
got it apart. turns out there is a little plate just under the front nav buttons (will post pics later if possible) that needed pried off to reveal 2 other screws. I got the speaker to work, kind of. it has a lot of crackle to it. now I have a few questions I am not sure on.
how can I tell if the unit has previously been modded, should I search the rom revision on the forum?
if it has been modded, possibly just a bad radio file has been loaded, I kinda doubt that but could that be possible?
lastly, does anyone have any idea where to purchase a replacement ear speaker? I have searched high and low. only found one new they wanted $85.00 for just the speaker. Gee, little high.
I have seen dead units on ebay for $40.00, thinking that may be my only option now.
Hey all. I have no sound. Zero. I tried re-flashing zeus - no go. Tried clearing/resetting everything via cwm - nope. I tried GTG twice - nada. Even back at stock, I've got nothing. I can hear my voicemail, but no system tones, no ringtones, no audio on videos - both youtube and local to phone. Alarms won't work. Nothing!!
After pouring over these threads, I tried headphones, and they work - but no headphone icon at top of my screen. I'm at my wit's end and am pulling out my hair. Does anyone have any ideas? Please?
Start with the simplest solution first. Is the media volume turned up? btw I don't have a headphone icon either but I'm not sure it had one to start with.
Running Zeus 6 also.
~wolverine~ said:
Start with the simplest solution first. Is the media volume turned up? btw I don't have a headphone icon either but I'm not sure it had one to start with.
Running Zeus 6 also.
Click to expand...
Click to collapse
uhhhh, yeah. I've checked all the sounds like 80 times - After each restore, reload, refresh, reboot, re-flash to stock, re-wipe, re-unameit. lol
I just hope it's not hardware related, although if it were, I'd think I'd have had to change something or move something that I hadn't. I just removed my ext sd card about 15 minutes ago, but nothing there either.
the best hope that you will have if it's not hardware related:
take out microsd card.
factory reset from /settings/privacy/reset
heimdall 1 click with repartition and bootloaders
do it twice for good measures
run the complete stock rom...
if that doesn't work, it may be hardware corrosion
I hav had this happen believe it or not i just gave the phone a slight twist holding it at the ends...sounds funky not a hard twist...but i got my sound back..i keep it in a ballastic case now...my infuse is a lil older and has seen to much desert heat...
True story...
Sent by Aeon (bigfau's) Awesomeness via me !
OK, y'all. I've got news and info on this issue. After trying everything possible short of throwing it into the river, I figured it was def hardware related. I, of course prayed & am convinced that is the real reason it started working, bit jic here is what I did. I checked online just to see (I'm not an idiot, I wasn't going to take it apart. Well, probably not). But I was still all for slapping and twisting and flicking the heck out of it. Then, I decided to look at the other side of it. So I removed the battery and there is a tiny little slit-like hole there. I got out a safety pin and just kinda wiggled of a bit mostly toward the inside of phone. Lo and behold sound was working when I turned it back on. I can't believe it! I'm so happy!
Sent from my SAMSUNG-SGH-I997 using XDA
EDIT: It's easier to type on PC than on phone, so now I can make a short story even longer. haha. I should mention that this could be risky if done wrong, if that's not obvious for some people, and could screw your phone even more, so BE CAREFUL!!!
I'd consider using something flat enough to get in there, but not as sharp as a pin. I was just Macguyver-ing it. You do have to remove the batt cover, but don't need to take the batt out to get to the slit, but you may want to - in case of interference from metal pin and whatever. To be more specific to where this is: the external speaker is located on the backside of the phone - bottom, left. Duh, right?
Also, take this time to clean out any dust/crud that may have gathered in the tiny little cracks and corners, which accumulates more for those of us that remove the batt cover often, like putting phone in DL mode and such. Don't use alcohol or anything - this is a good place to use the pin or needle, and especially blow on it.
At one point, I had phone on and video going to gauge whether anything I was doing specifically was working or not. I never got sound to work that way, but it's still a plausible idea for someone else to try. Anyway, I hope this helps someone else out there. I like to include as many details as possible when I post stuff b/c it helps me when others are specific. So, let me know if this was helpful to you and good luck!
dde333 said:
OK, y'all. I've got news and info on this issue. After trying everything possible short of throwing it into the river, I figured it was def hardware related. I, of course prayed & am convinced that is the real reason it started working, bit jic here is what I did. I checked online just to see (I'm not an idiot, I wasn't going to take it apart. Well, probably not). But I was still all for slapping and twisting and flicking the heck out of it. Then, I decided to look at the other side of it. So I removed the battery and there is a tiny little slit-like hole there. I got out a safety pin and just kinda wiggled of a bit mostly toward the inside of phone. Lo and behold sound was working when I turned it back on. I can't believe it! I'm so happy!
Sent from my SAMSUNG-SGH-I997 using XDA
Click to expand...
Click to collapse
good job.
to help other misfits, you can change the title of your op to [SOLVED] ..etc...
Some clarification on repairing speaker / restoring power
This is a great post and worked for me so I wanted to clarify some more detail.
Diagnosis: My external speaker would not work or work intermitently. I could hear on my handset and headphones but could not use speaker for conversations, media, etc.
I tried reseting with/without power on.
Tried factory resetting the phone.
Tried "headphone sex" (removing headphones in and out quickly as the software may have a glitch where it does not recognize the headphones were removed hence restoring external sound to the speaker) This is NOT a common problem with the Infuse but with other Samsung phones like the Captivate I believe.
After many people having similar symptoms I saw this post and figured it was a power issue/hardware not software problem.
Previous post....
1. I could not find a small hole to put a safety pin through (as previously posted). I used a paperclip as it is less pointy and less damaging and there wasn't a single hole to put it through.
MY RESOLUTION/REPAIR THAT SOLVED THE PROBLEM (same issue just different way to fix as I did not find any hole to put a pin through)
2. you will need to remove the back cover of the phone. Remove the battery cover, battey, sim card, and ext SD card. There are 6 small jewelry type screws. You should have an eyeglass kit screwdriver or jewelry kit with small screwdrivers. I did manage to use a small regular screwdriver but it really did not fit and could strip the heads of the screws.
3. Once the 6 screws are out, remove the back cover of the phone. Mine was a little hard to remove. The top is the earphone jack and the cover goes over the earphone jack, so great care should be made to try and take the top off last. For mine, the side was easiest to remove first( in the middle). Little by little you should be able to work your way around the edges until it is all separated from the screen/front.
*TIP Do not worry about parts coming out. The back cover is secured with the 6 screws. The rest of the phone and boards are screwed down to the front/screen so all you are doing is removing the back cover.
4. Once the back cover is separated from the front/screen, locate where the speaker lies in the back cover and where it comes to meet the front/screen. You will see two small gold square tabs on the back of the back cover next to the speaker. If you look where these connect to the front/screen you will see another two small gold tabs. These ones are NOT flat. They actually sit up and are hinge like. ***THIS IS WHERE THE PROBLEM IS****.
5. As the phone ages and gets used aka banged dropped wet, etc, these tabs lose their "springyness" and pressure so they get flat and fail to contact the other tabs next to the speaker, resulting in no power getting to the speaker or intermitent power as they make contact. THIS IS WHY IF YOU READ OTHER POST ON OTHER FORUMS YOU WILL SEE PEOPLE SAYING THUMPING OR PRESSING ON THE SPEAKER MAKES IT WORK INTERMITENTLY!
6. Get a pair of tweezers and slide one side of the tweezers between one of the small gold tabs on the front/screen side of the phone. BE CAREFUL! The tabs are very small thin and fragile so go slow and make sure you are between where the tab mounts to the circuitboard and where it sticks up to contact the speaker tabs. SLOWLY work the tab up so that you restore the arch or springyness back to it. It should look like this <. Do the same for the other. Basically you are raising the tab so that when you put the back cover on it makes contact with the speaker tabs, hence providing the proper power to the speaker.
7. Put the cover back on, screws, ext SD card, sim card, battery, and batter cover back on. Power up and adjust your ringer volume. You should here the speaker working.
Awesome. I'm glad my post pushed you in the right direction and am certain your post, with more details, will be helpful to others in the future. Phones are so much better with sound, aren't they? :highfive: Have a wonderful weekend.
I also had the problem of no sound at all, but the head phones worked flawlessly. In my case this is what it was (don't laugh) I ordered a replacement body for my phone for like ten bucks on ebay, pulled the old one off...replaced the housing and everything SEEMED to work just fine. I really didn't notice that my phone was not making any sounds until about a week later and just figured that maybe I had installed something that was conflicting with the phone or simply needed to re-flash the ROM, so I went and did just that and nothing seemed to work. Back to stock....NOTHING...New kernel...NOTHING!! I was becoming hopeless at this point till I read this thread. I had to think back to when (I think) it stopped making any sound and could only come up with the day I replaced the housing, so I retraced my tracks. LOL and what I came up with made me chuckle a little, what had happened was when I took the old back off I did not notice that the speaker is highly camouflaged near the bottom of the housing and simply needed to be snapped out and snapped back into the new housing. After this.....VIOLA..SOUND! So, maybe this can help someone that may be having the same issue and just cannot get to the bottom of it..
Thanks XDA and its members:good::good::good::good::good:
No Sound On Infuse
bigjoe2675 said:
I hav had this happen believe it or not i just gave the phone a slight twist holding it at the ends...sounds funky not a hard twist...but i got my sound back..i keep it in a ballastic case now...my infuse is a lil older and has seen to much desert heat...
True story...
Sent by Aeon (bigfau's) Awesomeness via me !
Click to expand...
Click to collapse
I have to say that this method worked like a dream for me. I couldn't believe it when I tried it. I went to "settings" -> "sound" -> "volume" -> "Incoming call volume" and then adjusted it so it would make a sound. No sound was being made but I knew it should have been so I grabbed the top and bottom and slightly gave it a little twist, just barely and the ringtone came right on and has been working perfect since. The Infuse I have is 99.9% mint condition, never been dropped and has always been inside a leather case with a full fold over front. Not even a hair line scratch on the screen, back, sides or anywhere. This is why I couldn't understand why the sound just decided to go out for no reason but anyway, this fixed it and a big thanks to "bigjoe"! I thought I was about to have to buy a new phone because I can't hear (vibrate) more than a foot or so away.
Solution - Twist
Judge Joseph Dredd said:
I hav had this happen believe it or not i just gave the phone a slight twist holding it at the ends...sounds funky not a hard twist...but i got my sound back..i keep it in a ballastic case now...my infuse is a lil older and has seen to much desert heat...
True story...
Sent by Aeon (bigfau's) Awesomeness via me !
Click to expand...
Click to collapse
Thanks for this info. I had lost a lot of volume. After reading your post, I tried the twist thing and bingo, it worked. Thanks very much.
Judge Joseph Dredd said:
I hav had this happen believe it or not i just gave the phone a slight twist holding it at the ends...sounds funky not a hard twist...but i got my sound back..i keep it in a ballastic case now...my infuse is a lil older and has seen to much desert heat...
True story...
Sent by Aeon (bigfau's) Awesomeness via me !
Click to expand...
Click to collapse
SHUT THE FRONT DOOR.... - just twisted my cell and BAM....sound I LOVE YOU!!!!! XOXOXOXO awesomeness indeed
Wow!
parkerhawn said:
SHUT THE FRONT DOOR.... - just twisted my cell and BAM....sound I LOVE YOU!!!!! XOXOXOXO awesomeness indeed
Click to expand...
Click to collapse
I just gave my infuse the twist and the sound is back!! Insane! PS. I could always hear my sound but it was so faint I had to put my ear up to the speaker before I could actually hear the sound!
This actually works!
thomasmaio said:
This is a great post and worked for me so I wanted to clarify some more detail.
Diagnosis: My external speaker would not work or work intermitently. I could hear on my handset and headphones but could not use speaker for conversations, media, etc.
I tried reseting with/without power on.
Tried factory resetting the phone.
Tried "headphone sex" (removing headphones in and out quickly as the software may have a glitch where it does not recognize the headphones were removed hence restoring external sound to the speaker) This is NOT a common problem with the Infuse but with other Samsung phones like the Captivate I believe.
After many people having similar symptoms I saw this post and figured it was a power issue/hardware not software problem.
Previous post....
1. I could not find a small hole to put a safety pin through (as previously posted). I used a paperclip as it is less pointy and less damaging and there wasn't a single hole to put it through.
MY RESOLUTION/REPAIR THAT SOLVED THE PROBLEM (same issue just different way to fix as I did not find any hole to put a pin through)
2. you will need to remove the back cover of the phone. Remove the battery cover, battey, sim card, and ext SD card. There are 6 small jewelry type screws. You should have an eyeglass kit screwdriver or jewelry kit with small screwdrivers. I did manage to use a small regular screwdriver but it really did not fit and could strip the heads of the screws.
3. Once the 6 screws are out, remove the back cover of the phone. Mine was a little hard to remove. The top is the earphone jack and the cover goes over the earphone jack, so great care should be made to try and take the top off last. For mine, the side was easiest to remove first( in the middle). Little by little you should be able to work your way around the edges until it is all separated from the screen/front.
*TIP Do not worry about parts coming out. The back cover is secured with the 6 screws. The rest of the phone and boards are screwed down to the front/screen so all you are doing is removing the back cover.
4. Once the back cover is separated from the front/screen, locate where the speaker lies in the back cover and where it comes to meet the front/screen. You will see two small gold square tabs on the back of the back cover next to the speaker. If you look where these connect to the front/screen you will see another two small gold tabs. These ones are NOT flat. They actually sit up and are hinge like. ***THIS IS WHERE THE PROBLEM IS****.
5. As the phone ages and gets used aka banged dropped wet, etc, these tabs lose their "springyness" and pressure so they get flat and fail to contact the other tabs next to the speaker, resulting in no power getting to the speaker or intermitent power as they make contact. THIS IS WHY IF YOU READ OTHER POST ON OTHER FORUMS YOU WILL SEE PEOPLE SAYING THUMPING OR PRESSING ON THE SPEAKER MAKES IT WORK INTERMITENTLY!
6. Get a pair of tweezers and slide one side of the tweezers between one of the small gold tabs on the front/screen side of the phone. BE CAREFUL! The tabs are very small thin and fragile so go slow and make sure you are between where the tab mounts to the circuitboard and where it sticks up to contact the speaker tabs. SLOWLY work the tab up so that you restore the arch or springyness back to it. It should look like this <. Do the same for the other. Basically you are raising the tab so that when you put the back cover on it makes contact with the speaker tabs, hence providing the proper power to the speaker.
7. Put the cover back on, screws, ext SD card, sim card, battery, and batter cover back on. Power up and adjust your ringer volume. You should here the speaker working.
Click to expand...
Click to collapse
-----------------------------------------
Thank you so very much, it helped a lot to follow your directions. I realized how hard it is to remove the entire cover so I used a very small flat screw driver (eye-glasses kit) and popped open only the bottom corner where the speakers were. I could then see the hinged-like tabs and used one hand to keep the cover from snapping back shut and the other hand to "raise" the hinged side of the tabs using the same tiny flat screw driver. I raised them high enough (gently) and put the cover back in place. I then put the battery back, turned on the phone and Voila! Sound is crisp and clear once again.
So I bought a second hand MT4GS today, but the buttons on the face of the phone don't work - it came rooted, s-off, with some buggy ICS Rom installed. I just installed Bulletproof in the hopes that it was just the other rom causing the issue, but the buttons (home, menu, back, genius) are still non responsive. The corresponding buttons on the qwerty slider work fine.
Any ideas or suggestions? Would it help to try flashing a zip to map those front buttons? Since they don't work in 2 roms, is it something physicial?
I would appreciate any advice you could give me, whether its a certain way to try and remap the keys to force them to work, or a rom that might fix it, or maybe a kernel that would be most compatible with a quick, stable rom with full camera features? I really don't care about being on the bleeding edge or having ICS, I just want a stable, every day use rom.
Thanks much!
Almost certainly physical. The flex cable inside has 5 dangly little fingers that go down in that area for the 4 buttons and the track pad. Very easy for that to get gummed up, and not an easy thing to fix (because this phone is kind of a pain to take apart). Still, you can find some videos on YouTube that show how to disassemble the phone. You can try it. Put it back together carefully enough, and those buttons might start working again. (If you're unlucky, you might need a new flex cable.)
OK, do I need anything besides standard precision torx to open this phone up? I haven't really peeked inside, since we only got it a couple hours ago.
Also, I noticed that the home button on the physical keyboard sometimes takes me home, and sometimes selects things, depending on what I'm doing - talk about weird! Either way, it's still better than my ancient and fading G1 I've been stuck using the last couple days.
So if I open it up, do I just want to blast it with canned air, or is that a big no-no? Get a little soft brush and brush around the fingers? Tell it sweet nothings and tuck it in bed?
Edited to add:
Aaaand while I was busy typing and researching, my husband is cracking it open like a kid opening a Christmas present - wish him luck!
Bah humbug, just a note to let you know that we got to the 8 screws that hold the keyboard to the sliding part, and 2 of the phillips screws are stripped. So we're putting it back together until tomorrow night, when we will try to figure out how to get those 2 screws out.
But hey, at least we took it almost all the way apart, and got it back together, and it is working as well as it was before - if we didn't totally break it, then we're still ahead of the game!
So now I'm looking for advice on the following:
1) best way to clean out those button flex cables (air, small brush, ?)
2) ways to keep this phone clean inside - previous owner must have worked in a dust bunny factory, based on the dust I found inside the half of the phone we got disassembled. Then again, I live in a desert, it's to be expected?
3) super-stable rom/kernel combo that also gives me the camera app goodness that this phone deserves (And be honest, if I need stock to get the camera working, I'll go to stock).
rhondalicious said:
So now I'm looking for advice on the following:
1) best way to clean out those button flex cables (air, small brush, ?)
Click to expand...
Click to collapse
Compressed air or a small brush should work fine... If it is just a connectivity problem caused by dust or dirt or whatever.
rhondalicious said:
2) ways to keep this phone clean inside - previous owner must have worked in a dust bunny factory, based on the dust I found inside the half of the phone we got disassembled. Then again, I live in a desert, it's to be expected?
Click to expand...
Click to collapse
The only way to really keep it clean on the inside is to take it apart and use some compressed air or a small brush to get rid of all the dust... Doesn't matter where you are located you are gonna get dust inside of a phone that has no dust covers... You can see if they make any cases that have dust caps for the ports (I'm not sure if there are any for the MT4GS or not... haven't looked...)
rhondalicious said:
3) super-stable rom/kernel combo that also gives me the camera app goodness that this phone deserves (And be honest, if I need stock to get the camera working, I'll go to stock).
Click to expand...
Click to collapse
For the awesome sense camera I would recommend stock or if you want ICS then one of the Virtuous roms. Either Primmadonna (ICS+ Sense 4.0) or Inquisition (desensed with sense camera). I'm sure others have other opinions, but those are the only roms I have used... Well that and CM9 which is basically fully functional although it will never have the sense camera, but the AOSP camera isn't too bad. They are all super stable as well.
Those 8 little screws are easy to strip. They are only a couple of turns each, but if they don't budge ... well, I've got a broken phone just like that that I can't fix. If you figure out a way of drilling the out or whatever, I'd be interested to hear.
The dust in these phones is a well-known problem. In particular, dust can find it's way under the glass, and it's a complete teardown to clear that out.
Were the screws stripped when you got there, or did you do it? If someone had the phone apart before, it could be that the little flex cable fingers are just not in the right position. If that's the case, you just have to do it right. (Easier said than done since it's kind of tricky to work on it and keep everything positioned while you close it up.)
Those 2 screws were stripped when we opened it - we've tried a couple things and still haven't been able to get them out, but we haven't tried the trick of dabbing superglue on a screwdriver and letting it dry in the hole yet, and we haven't tried one of those screw extractors that is like an extra sharp screwdriver. We tried cutting a new slot with my dremel, but the cutting discs I have are too soft for the screw heads, we need a diamond cutting disc, I think. We also tried one of those drill chucks that has the 2 ends for reaming a new hole and unscrewing, but my husband is afraid to drill through the phone, and the chuck doesn't fit in my dremel.
I'm pretty sure whoever had the phone before me tried to fix it and gave up, that's why we were able to buy it off him for so cheap. I don't mind fiddling around with it, since the actual phone bit works just fine.
If I ever manage to get these stripped screws out, I'll let you know what works!
Those screws are definitely short in length, as you've seen from their companions, so I am also leery of drilling a millimeter too far.
Another thing I've contemplated is carving the plastic around the screw head so that the screw no longer holds anything in place. Haven't been bold enough to try it, though. I figure after that I would be able to get a grip on it with needlenose pliers and twist them out.
((My phone with the stuck screws is a water damaged phone that I bought used. [[Seller said "I don't know what happened to it", but, uh, it's a bit obvious once you look inside or even look at the sticker.]] Screen was flaky and I was going to take it apart and stare at it til I ran into those stuck (and rusty!) screws. Luckily, after a few days delay for head-scratching, the screen started working perfectly. I like to think of it as the Universe finally giving me a break.))
Would a cell phone repair place have better ways of getting those stripped screws out? My husband said I should find out what they would charge to open it up, but if I can't get the screws out, how would they do it?
And it's nice that your soggy-phone decided to start working for you, it's a pain dealing with wet phones, sometimes. My neighbor dropped hers in a big cup of soda once and I got to have futo leaning it out to help prevent sugar/corrosion issues. I only managed to keep it working for another 3 months, but by then she had already dropped it into a toilet.
rhondalicious said:
Would a cell phone repair place have better ways of getting those stripped screws out? My husband said I should find out what they would charge to open it up, but if I can't get the screws out, how would they do it?
And it's nice that your soggy-phone decided to start working for you, it's a pain dealing with wet phones, sometimes. My neighbor dropped hers in a big cup of soda once and I got to have futo leaning it out to help prevent sugar/corrosion issues. I only managed to keep it working for another 3 months, but by then she had already dropped it into a toilet.
Click to expand...
Click to collapse
For wet phone the best thing you can do is to use milliQ water (distilled will do also), put the phone in it, it basically removes any ions from previous fluids (take the battery out!), then let it dry out (24h should do), please battery in and use... Worked for me few times...
Btw. Good rom is virtuous inquisition or Primadonna, cm9 did not work for me so good, too many unfinished things...
Sent from my myTouch_4G_Slide using xda premium
I've been a member for quite a while, but don't think I've ever posted so please take it easy on me . I bought my husband a MyTouch 4g Slide and liked it, so I bought myself one (both used from Ebay). With my husbands, we had the black screen occasionally. I did some research and with a quick fix of the cover blocking something and switching it around - :victory:**** all set.
Mine (still running original software was running fine. Well, my youngest of 5 kids was apparently playing a game and got frustrated because it kept freezing or something and hit or banged the screen from what he told me -----
Anyway, when he gave me the phone it was this kind of white/reddish fuzzy looking color. I turned it off and tried to reboot. (yes, I've pulled the battery) and aside from the tiny little red light (LED) or the small green one in the same corner OCCASIONALLY coming on and an occasional vibration at that time - NOTHING, NADA, ZILCH....
On the good side, I didn't totally lose it and start screeming at him .... on the bad side, I have a phone I just bought (and like) and can't use it. I know that it might be a just toss and rebuy, but before I do, is there something we can replace (digitalizer/screen/etc)??
You guys up here are amazing and it's the first place I think to come for any of the phones we've had (HTC, MyTouch, SideKick) and I'm so thankful for the site. I figured if I was going to get right to the point and get a straight up answer, without getting scammed, this is the place.... sooooo, anything is better than nothing! Thanks!
Hello. Sounds to me like the LCD screen blew out. They blow out easily from being banged around pretty hard, especially on this particular phone. If the light turns on, then the phone is still alive. If it vibrates as well, then it's definitely still good, as the system is obviously still running. You should try replacing the LCD screen. If you've never done this type of thing, then I'll tell you this... it won't be very easy at all. HTC put so much damn adhesive all over this phone, it's ridiculous. They even glued the LCD to the digitizer, & really tight too.
If you try to do it yourself, or have someone do it for you, be very careful. You can get screens for cheap on ebay, but it may be troublesome to get it done. It's also hard to put them together while preventing dust from getting in there as well. Lint-free micro fiber rags, & maybe a hand air pump, will be very helpful to have around. You can see disassembly videos & tutorials online, like from repairsuniverse.
3ndymion218 said:
Hello. Sounds to me like the LCD screen blew out. They blow out easily from being banged around pretty hard, especially on this particular phone. If the light turns on, then the phone is still alive. If it vibrates as well, then it's definitely still good, as the system is obviously still running. You should try replacing the LCD screen. If you've never done this type of thing, then I'll tell you this... it won't be very easy at all. HTC put so much damn adhesive all over this phone, it's ridiculous. They even glued the LCD to the digitizer, & really tight too.
If you try to do it yourself, or have someone do it for you, be very careful. You can get screens for cheap on ebay, but it may be troublesome to get it done. It's also hard to put them together while preventing dust from getting in there as well. Lint-free micro fiber rags, & maybe a hand air pump, will be very helpful to have around. You can see disassembly videos & tutorials online, like from repairsuniverse.
Click to expand...
Click to collapse
Thanks so much!! My husband and son "TINKER" with things like this....mostly bigger stuff like cars and all ... LOL... but lately a little bit with our laptops/psp type stuff. However, if I could find someone who does this a lot and it wasn't too expensive, that would probably be easier, especially with all the kids around here . Any idea where I could search for a reputable person (ebay, etc???). Also, when you say LCD, that would be like the ones I've seen on ebay that say LCD with digitalizer....right?? I really appreciate the info. I was hoping it might be something like that, something at least "possible". You rock. I'll let you know how it turns out.
it is a pain! and yeah it does sound like the lcd needs to be changed out, careful now because there are multiple lcds that htc used and they arent compatible, i would suggest opening it up first and then seeing which one to order
HERE IS SOME INSIGHT if you look to the third page or so you can see my experience with this phone. if you have someone who likes to tinker give them the project, as much of a pain as it is... its not too bad still i will suggest having them do a little research first though
good luck!
chixwithkidz5 said:
Thanks so much!! My husband and son "TINKER" with things like this....mostly bigger stuff like cars and all ... LOL... but lately a little bit with our laptops/psp type stuff. However, if I could find someone who does this a lot and it wasn't too expensive, that would probably be easier, especially with all the kids around here . Any idea where I could search for a reputable person (ebay, etc???). Also, when you say LCD, that would be like the ones I've seen on ebay that say LCD with digitalizer....right?? I really appreciate the info. I was hoping it might be something like that, something at least "possible". You rock. I'll let you know how it turns out.
Click to expand...
Click to collapse
To have someone do it, I think it'd probably be best to search locally for a repair shop. If you live anywhere near a big city, they probably have some cell phone repair shops around that would be able to do it for you. Even check craigslist.
As for the screen itself, there are 2 parts. There is the LCD screen, or the actual TV screen itself, & there is a sheet of glass placed on top of it. That sheet of glass is called the digitizer. It is what senses your touch. The manufacturers seems to love gluing them together nowadays. Not like the myTouch 3G Slide which was not glued together & was so easy to take apart & deal with. But yeah, the LCD is the actual TV screen. That's what you likely need to change.