Database Info

delete

please mod delete

my favorite part
eduardmc said:
After you have completed your ps3 hack
1- remove battery from EVO
2- Hold Volume Down and power to get into recovery mode again
Click to expand...
Click to collapse
lol just kidding, im pretty sure i know what you meant.

is there some sort of problem flashing directing from the psfreedom enabled kernel back to your preferred one? Does that break wifi and 4g or something? If so then I understand the middle step of flashing the psfreedom disable file, but if not it seems like a useless extra step.

deathsled said:
is there some sort of problem flashing directing from the psfreedom enabled kernel back to your preferred one? Does that break wifi and 4g or something? If so then I understand the middle step of flashing the psfreedom disable file, but if not it seems like a useless extra step.
Click to expand...
Click to collapse
It brakes 4G & WIFI with psfreedom from what i know
sent from htc evo 4g

a little unnecessary....
you dont have to use the disable and then flash the kernel. If you are using a rom that doesnt have a dedicated disable.zip made for it (Fresh and Baked Snack have one) then all you do is need to flash the kernel you want of top. This is how I've did it since day one without any issues or lost data of anything. I usually do a Dalvik/cache wipe before flashing the kernel but im not certain that its necessary. Im glad some one made a thread to at least let people know that a nandroid backup isnt needed, cause those take forever...

where can i find the fresh dedicated disable hack, thanks!

zeeyo987 said:
where can i find the fresh dedicated disable hack, thanks!
Click to expand...
Click to collapse
Its somewhere in the original Psfreedom for evo thread. start and the back and work your way forward and you'll find it.

all this does is avoid the nand restore by flashing back your original kernal. The reason i didn't include this in my thread was because everyone has their own kernal. Sure many use the same but to make it a one step no mess up without people who can't read posting OMG OMG, just nand restore...done. But ya, i chose not to include a "disable" which is essentially a reverting of the kernal.

Hey theres a PSFreedom recovery now! Hopefully well get one for the EVO 4G like this one...
http://forum.xda-developers.com/show...72&postcount=1

so when u jailbreak the ps3 with the evo. do u need to plug it in again when u turn off the ps3. does it require the phone everytime to see the install package files icon?

stanik1 said:
so when u jailbreak the ps3 with the evo. do u need to plug it in again when u turn off the ps3. does it require the phone everytime to see the install package files icon?
Click to expand...
Click to collapse
Yep. Every time. Small price to pay though if you ask me. Ive backed up 2 games so far and they work flawlessly. No glitches, lag, nothing. I'll plug my evo in a hundred times for that.

Tiffany84 said:
Yep. Every time. Small price to pay though if you ask me. Ive backed up 2 games so far and they work flawlessly. No glitches, lag, nothing. I'll plug my evo in a hundred times for that.
Click to expand...
Click to collapse
I meant do i have to redo the whole re flashing of the zips. Because i dont mind pluging the phone into the ps3 every time. but reflashing the phone is the tidiest part.

U have to flash the psfreedom kernel every time.
Sent from my PC36100 using XDA App

i guess thats the price we have to pay. hopefully in the near future someone will come up with an app. on and off switch for jailbreak. or maybe do a dual boot switching kernels . i can dream

[WIP] [PORT] Android 2.3.3 with Sense 2.1

Port of the Mytouch3g rom that had a rom stock rom from the Wildfire S
http://forum.xda-developers.com/showthread.php?t=1025330
Rom link will be available again when I get a bootable version.
How to flash:
Go to clockwork recovery and wipe and format everything except sdcard.
Install the rom.
Boot up and wait a while (might take about 10 mins so have patience)
Please respond to the thread with any errors that you encounter and also leave pics to for others to see and any pictures of errors encountered.

reserved just incase

As long as camera works, I'll be all over this.

If you actually complete a GSM port of THIS! Wow that'll be amazing. I am curious though, since the mods frown on "coming soon" threads, what is your definition of "soon". I might actually enjoy sense if it was GB fast. Thanks for working on this! I know *some* devs have said they want this, but I don't know if you've asked them for help/teamwork. Not a bad idea, there's only a few devs left anyway, send some PMs maybe you will find some nice help

Duce I'm with you. If this happens I'm on it.
Hijacked aospCMod Darkhorse GB Hero

il Duce said:
If you actually complete a GSM port of THIS! Wow that'll be amazing. I am curious though, since the mods frown on "coming soon" threads, what is your definition of "soon". I might actually enjoy sense if it was GB fast. Thanks for working on this!
Click to expand...
Click to collapse
Actually im going to but the link up by today for people to test out. My phone is a jerk though and for every sense rom that isnt eclair only goes to htc boot screen and stays there (probably because of my ext3 partition or might be because im s-on) but im sure it will work for others and hopefully I will fix my Hero's problem.

Hello,
So are we talking this evening yet? It has been a long time since I was willing to drive sense! Thumbs up all the way...
Cheers

jschill31 said:
Hello,
So are we talking this evening yet? It has been a long time since I was willing to drive sense! Thumbs up all the way...
Cheers
Click to expand...
Click to collapse
Probably in a hour I will have it up when I can use my laptop again.

ubnub82 said:
Actually im going to but the link up by today for people to test out. My phone is a jerk though and for every sense rom that isnt eclair only goes to htc boot screen and stays there (probably because of my ext3 partition or might be because im s-on) but im sure it will work for others and hopefully I will fix my Hero's problem.
Click to expand...
Click to collapse
Hey if you're gonna port GSM roms it takes kernel work, why on gods green earth are you s-ON !?!?!?
EDIT: also, if I read that correctly, you are not able to boot? I hope I misunderstood you...........
EDIT 2: I now reread your posts, and remembered your earlier thread posts today "I don't know how to port a GSM rom" and your last post in that thread was about 2pm, this OP at about 5:30. I sincerely want you to drop this ROM, but I now doubt you ported a GSM rom in a few hours. I really hope my suspicions are wrong, but if you don't post a bootable ROM, well.............................

I need to flash something. This may hold back the shakes & the slobbering tonight.

il Duce said:
Hey if you're gonna port GSM roms it takes kernel work, why on gods green earth are you s-ON !?!?!?
EDIT: also, if I read that correctly, you are not able to boot? I hope I misunderstood you.............
Click to expand...
Click to collapse
I've pm'd some devs asking for kernel help and I'm s-on cuz I always forget to turn it to s-off. Actually it's not just this rom that doesn't boot for me it's any sense rom after 2.1. I'm positive it will work for others though and it might b cuz I'm s-on

ubnub82 said:
I've pm'd some devs asking for kernel help and I'm s-on cuz I always forget to turn it to s-off. Actually it's not just this rom that doesn't boot for me it's any sense rom after 2.1. I'm positive it will work for others though and it might b cuz I'm s-on
Click to expand...
Click to collapse
based SOLELY on this post, I will not flash whatever you put up - unless of course others do and it works - but it won't I'm sure. You don't flip a frakking switch to go "off" And you just confirmed you have a zip that will do nothing. Booting up a ROM has NOTHING to do with the security state of your bootloader. Man this kinda reminds me of "webOS on heroC"......... Prove me wrong, please.

il Duce said:
based SOLELY on this post, I will not flash whatever you put up - unless of course others do and it works - but it won't I'm sure. You don't flip a frakking switch to go "off" And you just confirmed you have a zip that will do nothing. Booting up a ROM has NOTHING to do with the security state of your bootloader. Man this kinda reminds me of "webOS on heroC"......... Prove me wrong, please.
Click to expand...
Click to collapse
Dude calm down. And .zip does install and you can boot what im saying though that you cant seem to understand is that NO SENSE ROMS AFTER ECLAIR BOOT UP FOR ME. For me is the key word but for YOU (and others) its different. I had the same thing happen to me to with PMGRANDS Espresso rom and that boots up for others.

ubnub82 said:
Dude calm down. And .zip does install and you can boot what im saying though that you cant seem to understand is that NO SENSE ROMS AFTER ECLAIR BOOT UP FOR ME. For me is the key word but for YOU (and others) its different. I had the same thing happen to me to with PMGRANDS Espresso rom and that boots up for others.
Click to expand...
Click to collapse
Well, again, proof? I have a few thoughts that may help you. First, get s-off. Then, these froyo and GB sense ROMs are HUGE and may actually need custom MTD partitions for a larger /system (see firerats). Third, booting a beast that big will take a WHILE. Still, proove me wrong.

il Duce said:
Well, again, proof? I have a few thoughts that may help you. First, get s-off. Then, these froyo and GB sense ROMs are HUGE and may actually need custom MTD partitions for a larger /system (see firerats). Third, booting a beast that big will take a WHILE. Still, proove me wrong.
Click to expand...
Click to collapse
Might be cuz im not using MTD. I will get s-off then try booting again and see what happens

ubnub82 said:
Might be cuz im not using MTD. I will get s-off then try booting again and see what happens
Click to expand...
Click to collapse
I would recommend the eng-spl method, as it allows fastboot commands such as "fastboot erase system -w" which may help you flash these things after a clean wipe. How big is the ROM.zip ? That should tell you how large your system partition needs to be. I think the stock system partition size is 160mb. I remember in the beginning of the froyosense port it needed to be around 200 or so.....

il Duce said:
I would recommend the eng-spl method, as it allows fastboot commands such as "fastboot erase -w" which may help you flash these things after a clean wipe. How big is the ROM.zip ? That should tell you how large your system partition needs to be. I think the stock system partition size is 160mb. I remember in the beginning of the froyosense port it needed to be around 200 or so.....
Click to expand...
Click to collapse
Rom is about 119mb.

Going to nand and try.
Sent from my HERO200 using XDA Premium App

just for the hell of it im going to flash and see how everything goes. fingers crossed!

what's the md5 sum? hope you guys are s-off.

[Q] Rom/kernel devs?

just Got my Mytouch today !! i dev for the epic 4g but since i gained employment at Tmobile ive decided to get another phone just curious
how many rom/kernel dev's are there ?

lol.. we just got it rooted. Roms should be out within another month or so..

a month lol not even that long my dude

Well I saw CM7 is being ported by nightly to the sensation. You know the sensation and the mt4gs are like twins with different personality. Also to get a camera apk to work on other rom didnt they released the source for this phone on htc dev site.
Sent from my myTouch 4g Slide.

Yea, I suspect that the first beta roms will start appearing in a few weeks, maybe sooner. But I wouldn't expect stable roms to start showing up for at least a month.
The camera is going to be one of the things holding it back.
I, personally, would like to see some almost stock roms with CPU control....I would like to see sense go away, but it appears that would effect the camera to some extent. Either way, I'm happy to have root at this point. At least I was able to uninstall the bloakware and crap that I couldn't seem to stop running in the background.

Well when I get home tonight ill give a look into the source codes that htc released. I'll let you guys know if the frameworks is in it or not.
Sent from my myTouch 4g Slide.

I can try and port a sense 3.0 rom for you guys, but i'll need testers for it. And to the above poster, porting from Sensation to MT4GS isn't easy, this device has WVGA, while Sensation uses qHD instead.

Ace42 said:
I can try and port a sense 3.0 rom for you guys, but i'll need testers for it. And to the above poster, porting from Sensation to MT4GS isn't easy, this device has WVGA, while Sensation uses qHD instead.
Click to expand...
Click to collapse
If you do this, try and incorporate the stock camera .apk from the tmobile rom.
I REALLY think it's totally sense specific like the other sense rom cameras.

ratchetrizzo said:
If you do this, try and incorporate the stock camera .apk from the tmobile rom.
I REALLY think it's totally sense specific like the other sense rom cameras.
Click to expand...
Click to collapse
That camera has been ported already, I'll try and include it, but i'll need testers since i don't have a 4g slide. I'm doing this to speed up development and i have experience with the whole porting thing.

Ace42 said:
That camera has been ported already, I'll try and include it, but i'll need testers since i don't have a 4g slide. I'm doing this to speed up development and i have experience with the whole porting thing.
Click to expand...
Click to collapse
Really?! To what phones ? I went to check if HTC uploaded the Doubleshot source code and nop not there XD.

sonicjam said:
Really?! To what phones ? I went to check if HTC uploaded the Doubleshot source code and nop not there XD.
Click to expand...
Click to collapse
Not by htc, by members of xda of course. I've used the MT4GS camera on a rooted ver of the MT4G's 2.3.4 build and it works fine.
And on another note, i've finished the alpha port, i'll upload it to multiupload
EDIT: Heres the test rom
http://www.multiupload.com/GR0ELB5XY4
I recommend that you guys do a nandroid prior to trying the rom.

DOWNLOADING - I'll keep you updated!

going to take my girlfriends's phone today and try the rom, thanks.

initial install has me hanging at splash screen.
redownloading to make sure it wasn't just a bad download.
interestingly, the install in CWM took like 5 seconds.. literally. so fast I couldn't even read what it was doing.
will report back shortly.
edit: second go-around with a fresh download and I'm still stuck at splash screen. formatted /data, /cache, /system and deleted .android and android-secure on my sd card prior to flashing.
do you need a logcat, Ace?

pmcqueen said:
initial install has me hanging at splash screen.
redownloading to make sure it wasn't just a bad download.
interestingly, the install in CWM took like 5 seconds.. literally. so fast I couldn't even read what it was doing.
will report back shortly.
edit: second go-around with a fresh download and I'm still stuck at splash screen. formatted /data, /cache, /system and deleted .android and android-secure on my sd card prior to flashing.
do you need a logcat, Ace?
Click to expand...
Click to collapse
Yes, please upload one. And remember guys to make a nandroid always just in case.
Sent from miuiTouch 4G

Ace42 said:
Yes, please upload one. And remember guys to make a nandroid always just in case.
Sent from miuiTouch 4G
Click to expand...
Click to collapse
well I'd happily provide, but I can't get it. never run into this when trying to pull logcat.. judging from that error message, it sounds like /system isn't being written to during install? I dunno. let me know if I can help any other way, or if you have a suggestion for pulling a logcat another way.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\mark.abrahamsen>adb logcat
- waiting for device -
- exec '/system/bin/sh' failed: No such file or directory (2) -
Click to expand...
Click to collapse
restoring my backup for now.

I NANdroided, wiped data/cache/dalvik and installed from zip. Like pmcqueen said it flew through the install and rebooted automatically on me. It doesn't look like it actually rewrote/installed anything because my custom boot animation was still there from before. Unlike pmcqueen mine booted up fine, pretty fast actually, but acted as if I had just performed a fresh wipe of the ORIGINAL ROM; it took me through the MT4GS video and was the same rom, only as if I had just performed a factory reset. I wonder if it's clockwork that didn't perform the necessary functions? Are the files/folders/locations different on the MT4GS and that's why it didn't write anything? I didn't get any error messages... It's been a long time and I don't remember how to run logcats, so refresh me, and I'll hook you up. But it sounds like it just didn't install anything at all.

I think I know the issue, i'm working on it right now. I'm about to upload the 2nd test in a few minutes.

Ace42 said:
I think I know the issue, i'm working on it right now. I'm about to upload the 2nd test in a few minutes.
Click to expand...
Click to collapse
(patiently refreshing...)

unclespoon said:
(patiently refreshing...)
Click to expand...
Click to collapse
It's gonna be some time for some reason multi drops my upload speed to around 100KB/sec, it's at 50% right now.
Edit: 2nd Alpha is up, really hoping this ones a keeper
http://www.multiupload.com/7ZZRBBZBUM
#Removed non-compatible files and made other edits

[Q] I'm just so overwhelmed!

Ok so am familiar with android, and regularly flash and tweek my nookColor, but this phone is just WOW!
Ditching an iCrap4 for this phone was the best idea I had in a while, and within an hour after buying it I rooted it (had to do other shopping) . But there is so much more to choose from for an actual android device. The thing is I want to stay on stock 2.2.1 for a little while, until I do a lot more studying on roms.
Ok so here are my questions after tearing thru the searches with several different phrases:
1: Can I flash different kernels on stock rom? I keep getting many threads and read thru them hard but can't find the answer. Looking at Community Kernel 8.
2: Darn, reading thru other threads while creating this post fried my brain, forgot what 2 was.
Thanks y'all.

Yes You can! . I have flashed many different kernels on stock rogers infuse 2.3.3 with odin. I dont see why you wouldnt be able to on the AT&T version.

Sweet! Now to read up on odin, but will SGS or CWM work on the stock? That was the second question.

jonrobertd said:
Sweet! Now to read up on odin, but will SGS or CWM work on the stock? That was the second question.
Click to expand...
Click to collapse
SGS kernel flasher works fine on stock ROOTED 2.2.1 ROM. I believe CWM is flashed/installed when you flash the community kernel in SGS kernel flasher or other method. I can't remember off-hand as it's been a while since I was on stock froyo for any length of time. LOL.
You will probably also want to read up on Heimdall as well. It's a good method of flashing pretty much anything to your phone and Odin can be finicky sometimes. Personally, I've never had a problem with Odin but knowing how to use both is a good idea. You know, just in case.

Even sweeter then, and I have CWM already, so that will get replaced? No problem.
This is gonna be hectic keeping all the stuff for the "andros" seperate. lol
I'm really itching to flash a rom, but this thing is set up like I like it, and it was a pain getting her there.
That is why I am waiting to flash, I'll get bored with the way it looks in a week or so, and start over.
Plus RESEARCH is crucial.
Thanks y'all

Ok flashing community v8 now and this voice is telling me it has 5 mins left, oh that is cool!
Now how do I tell if it took? What should cpu spy say? And I still have the green CWM. ( using rom manager, think its ok but can I switch it?)
3 button takes me to Red CWM 2.5.1.3 Voodoo lagfix. It wont let me get to my actual mSD card though. Is that normal?

jonrobertd said:
Ok flashing community v8 now and this voice is telling me it has 5 mins left, oh that is cool!
Now how do I tell if it took? What should cpu spy say? And I still have the green CWM. ( using rom manager, think its ok but can I switch it?)
3 button takes me to Red CWM 2.5.1.3 Voodoo lagfix.
::::
Click to expand...
Click to collapse
Yes, you would now be on red cwm. Your fine
Big dog Infuse I997 GB KJ4

Edited while you posted about mSD card, but see the Kernel took, my DA self wasn't paying attention.
Do I even need Rom manager? Its CWM is 2.5.1.2

jonrobertd said:
Ok flashing community v8 now and this voice is telling me it has 5 mins left, oh that is cool!
Now how do I tell if it took? What should cpu spy say? And I still have the green CWM. ( using rom manager, think its ok but can I switch it?)
3 button takes me to Red CWM 2.5.1.3 Voodoo lagfix. It wont let me get to my actual mSD card though. Is that normal?
Click to expand...
Click to collapse
I don't think rom manager does us infuse owners any good so you can install it but I've read it doesn't work all that well with our phones. It worked flawlessly with my n1 but support for infuse is not there yet.
I've never been able to mount the SD card in red cwm if that's what you were referring to. The community kernel does not overclock so really you just take advantage of the ext4 fs and voodoo lagfix (robot voice lol).
Hope this helps.
Sent from my SAMSUNG-SGH-I997 using xda premium

So everything is going good, trying out different radios now as service in my area sucks!
I have run into a small problem though, I really want a different boot animation, but there is no bootanamation.zip in the system/media folder on the stock rom. Just a bunch of .qmg files. Can I just add the file and it work? I was gonna try it, but wanted to see if anyone else was a guinea pig. Dont wanna screw something up too bad.

jonrobertd said:
So everything is going good, trying out different radios now as service in my area sucks!
I have run into a small problem though, I really want a different boot animation, but there is no bootanamation.zip in the system/media folder on the stock rom. Just a bunch of .qmg files. Can I just add the file and it work? I was gonna try it, but wanted to see if anyone else was a guinea pig. Dont wanna screw something up too bad.
Click to expand...
Click to collapse
if your on stock i believe they are located somewhere else, but the main question is why are you still on stock??? :O
want good battery life and performance? CM7 is the way to go. yeah you can get prolly the same off infused or other roms, but thats after numerous tweaks, tweak this change that, tighten that up, loosen that up, delete that, add this blah blah blah. in my experiences, CM7 is the best out of all of them.
just my 7 cents.

Is everything (bluetooth) working on CM7 (HDMI doesn't I know)? Weird issues of any kind?
That or Serendipity are what I am looking at.

Bluetooth is the only buggy thing. But I don't use it so it doesn't bother me. Other than that its amazing.
Sent from my SGH-I997 using xda premium

Sounds like my ROM then, I use it on my nook, so it will be familiar.

jonrobertd said:
Sounds like my ROM then, I use it on my nook, so it will be familiar.
Click to expand...
Click to collapse
Yeah, battery life is around 15-16 hours for me with 20% left on it when i get home to charge it. this is after some music texting quick searchers and what not. could be better if you really really work the battery though but im fine right now.

jonrobertd said:
So everything is going good, trying out different radios now as service in my area sucks!
I have run into a small problem though, I really want a different boot animation, but there is no bootanamation.zip in the system/media folder on the stock rom. Just a bunch of .qmg files. Can I just add the file and it work? I was gonna try it, but wanted to see if anyone else was a guinea pig. Dont wanna screw something up too bad.
Click to expand...
Click to collapse
If the bootanimation.zip isn't in system/media try data/local. I don't currently have an infuse, in waiting for mine , but other phones I've owned have had the zip in data/local... Good day

Tried data local, but I think the only way to get custom is to have a custom rom. No boot.zip on phone at all using a searcher.

it has to kernel enabled too... Once you get on CM7, if you do, it will be in the media folder.

jonrobertd said:
So everything is going good, trying out different radios now as service in my area sucks!
I have run into a small problem though, I really want a different boot animation, but there is no bootanamation.zip in the system/media folder on the stock rom. Just a bunch of .qmg files. Can I just add the file and it work? I was gonna try it, but wanted to see if anyone else was a guinea pig. Dont wanna screw something up too bad.
Click to expand...
Click to collapse
I'm on the latest KJ4 leak and there wasn't a bootanimation.zip in the media folder neither. All I did was drop what bootanimation.zip I wanted into that folder a BOOM goes the dynamite
Big dog Infuse I997 GB KJ4

Tried that too, no luck.
So Im lookin at S7, but coming from stock ROM, with infused 2.0 kernel, I know I need the infused GB kernel after flashing the ROM, but do I have to wipe system and DATA, and start customizing my stuff again? Or just format system, cache and dalvic, flash rom and kernel, fix permissions, and go? Then my phone should be the same with all stuff there, just updated to a better ROM.

MIUI V4 Now?

So how possibly will it be now to port MIUI V4 to the infuse now that CM9 is up and running? I'd like to see it. I tried to do it myself. The ROM gets past the kernel splash and to the MIUI boot animation. The bottom buttons light up but it dosen't boot in.

phoenix2217 said:
So how possibly will it be now to port MIUI V4 to the infuse now that CM9 is up and running? I'd like to see it. I tried to do it myself. The ROM gets past the kernel splash and to the MIUI boot animation. The bottom buttons light up but it dosen't boot in.
Click to expand...
Click to collapse
Same here. I can't figure out what I'm doing wrong, and I've already pm'ed some of the other devs, they don't feel like helping. Did you use a guide, if so which one?

kirin0ichiban said:
Same here. I can't figure out what I'm doing wrong, and I've already pm'ed some of the other devs, they don't feel like helping. Did you use a guide, if so which one?
Click to expand...
Click to collapse
No guide. I've ported ROMS before, did it for the Infuse back when Mikey did his first port of MIUI GB. Kinda just know what goes where, or at least I usually do. Not sure what I'm going wrong this time. I'm kinda purposely flying solo as I don't have a full dev environment at home but if I have to I will get ADB working and get a log cat. Any chance you can get one?

Yeah, I have a pretty weak environment set up, I might be able to get you a logcat. It might be later on today or tomorrow, I've been unusually busy this week.

DO NOT FLASH IF YOU HAVE NO INTENTIONS TO CONTRIBUTE TO THE CAUSE!
IT'S BASICALLY NOT USEABLE
(TEST/ PROOF OF CONCEPT)
Here I have a copy of what I have so far. It still needs a lot of work, the touch screen seems to work in spurts and sometimes you can't get past the lock screen. I hardly have the time to continue the work because I am graduating soon and I'm getting prepared for finals. Please acknowledge this simple request, do not make a thread for this nor flash it if you have no intentions to post a log cat/diagnose its symptoms.
Instructions:
1)Flash jt1134's recovery (necessary -- at least if you don't have it)
2)Make sure you were previously on a cm9 rom
3)Wipe data/factory reset
4)Wipe dalvik cache
5)do not format "/system"
6)reboot
7)happy coding
http://db.tt/fOwDUIVE
Sent from my SGH-I997 using Tapatalk 2 Beta-5

i've tried porting it with 6 different miui v4 roms... always gets stuck on boot logo