I am trying to root FRF83 from the OTA update (I got impatient last night so reverted back to 2.1, and then did the stock OTA upgrade to 83, while we ait for CM6) Every time I run the quick and easy cyanogen rooter Wifi stops working.
Any fixes for this, or is there another easy way to root the phone through an update that has superuser, busybox.etc. I am at work, so I cant install sdk and do the adb fastboot method.
http://android.modaco.com/content/g...-erd79-frf83-superboot-rooting-the-nexus-one/
Related
motorola has released recently an update for the milstone
every time i download this update (OTA) it downloaded successfully but when i hit install the phone restarts then starts to unpack then the phone boots with the message update failed so
i pulled the downloaded file from /cache/FOTA/update.zip
and tried to apply it using open recovery and i got the following massage
E:could not find update-binary
i guss it is the recovery i use
so please help me installing this update
ps: i will post the link to the update.zip as soon as i upload it
you may want to use the motorola software update tool installed to your pc. I also encountered the same problem as yours, but when i did this method, i was able to update my phone. hope this helps.
i have forget to mention that when i use the software it tells me that there is no update for my phone
Any change in this update anyway?
Thanks.
ya i heard it make u lose root for good closes loop holes in software don't do it!!
I updated via PC (MotoConnect) and lost root, but 2.1 root method still works, so I just rooted it again..
The battery usage from new firmware patch is crazy; 50% gone overnight. The most of usage is from "phone Idell". I should wait.
That's most likely a one time deal: I had similar in the update from 2.0.1 to 2.1 (or was it 2.0 -> 2.0.1..?). First night almost ran the battery dry, but after the next recharging cycle (and maybe a reboot) things were normal again. That's actually a fairly common issue judging from various milestone/android forums..
Also: all I noticed after this update was a small increase in battery life :]
Hi Peter,
are you in 3G or 2G mode?
I'm mostly on 2G.
i have an evo rooted with 2.2.. i realise lastnight there is an ota from htc. if i update normally will i lose my root? i was almost going to flash the rom but i got lost in the radio update stuff and kernels etc.. i searched but i couldn't find a str8 answer.. ijust moved to android so i am a n00b.
You should update manually and not OTA if you are rooted. Otherwise, just rerun your root process afterwards if you lose root (this worked with unrevoked 3.2.1, not sure about other methods).
Hi All,
I'm probably one of the few here who is still using HoneyComb instead of ICS on my Xoom. I've been on 3.2.4 for some time now, and started getting the 3.2.6 update notification which I blew off until the other day when I said screw it, I'll update and go through the trouble of re-rooting, etc.
However, I attempted to use Solarnz's universal root method which I've used numerous times before and never had an issue with until now. So after pushing the recovery.img via Fastboot, everything appears to have been completed just fine, except when I reboot into recovery I get the damn android with an error.
I've tried pushing a few versions of recovery and each time it seems to work just fine, but again on reboot, I can't get into recovery like it never got pushed or somehow has been erased. I can even revert back to 3.2.2 and update to 3.2.4 and root and re-install clockwork no problem. But I keep getting that damn update notification every 5 mins, and I'm sick of it, hence why I bothered to update in the first place.
I know most people have by-passed this altogether by jumping to ICS, but I've had too many issues with the beta ICS versions out there (WIFI handoffs and disconnects mostly) and need to reliable daily driver vice ICS goodness (fortunately I have a GNex for that).
Anyway, since I hadn't seen much on this, I decided to post and see if its just me, or if this really is an issue?
I can probably go old skool and use the manual root method of pushing the SU files via ADB, but something isn't right here, and I wanted to get some feedback.
Thanks
DANOinSD said:
Hi All,
I'm probably one of the few here who is still using HoneyComb instead of ICS on my Xoom. I've been on 3.2.4 for some time now, and started getting the 3.2.6 update notification which I blew off until the other day when I said screw it, I'll update and go through the trouble of re-rooting, etc.
However, I attempted to use Solarnz's universal root method which I've used numerous times before and never had an issue with until now. So after pushing the recovery.img via Fastboot, everything appears to have been completed just fine, except when I reboot into recovery I get the damn android with an error.
I've tried pushing a few versions of recovery and each time it seems to work just fine, but again on reboot, I can't get into recovery like it never got pushed or somehow has been erased. I can even revert back to 3.2.2 and update to 3.2.4 and root and re-install clockwork no problem. But I keep getting that damn update notification every 5 mins, and I'm sick of it, hence why I bothered to update in the first place.
I know most people have by-passed this altogether by jumping to ICS, but I've had too many issues with the beta ICS versions out there (WIFI handoffs and disconnects mostly) and need to reliable daily driver vice ICS goodness (fortunately I have a GNex for that).
Anyway, since I hadn't seen much on this, I decided to post and see if its just me, or if this really is an issue?
I can probably go old skool and use the manual root method of pushing the SU files via ADB, but something isn't right here, and I wanted to get some feedback.
Thanks
Click to expand...
Click to collapse
Depending on what ROM your flashing if your trying to do the update from OTA then you have to have a 100% no bloatware removed rom, my suggestion is to download the one @ motodev and then flash 3.1 and update all the way to ICS (if wanted) otherwise I believe that when you get the (!) in recovery you can press once pwr+up fast (don't hold) and it will display the recovery window with the error message that's preventing you from upgrading.
after flashing the recovery, did you reboot into android and then into recovery? if yes, don't!
you have to reboot into recovery right after flashing the recovery.
Hi All,
Thanks for the feedback, I finally got recovery pushed and booted, along with root on 3.2.6.
As llama points out you must reboot into recovery upon rebooting from fastboot. I don’t believe this was a requirement previously. But once I did that, all was fine.
I’ve done this a thousand times before and even in my old notes I couldn’t find any reference to booting into recovery immediately after pushing the recovery.img. Is this something new with this update or has it always been this way? Call me crazy, but I can’t ever recall scrambling to catch the reboot and get into recovery before re-launching Android. I always rebooted in Android and made sure it actually loaded to ensure something didn’t get hosed, then I would reboot into recovery and flash the root zip.
DANOinSD said:
Is this something new with this update or has it always been this way?
Click to expand...
Click to collapse
as far as I know, this is a 'feature' introduced with every ota-update. To my knowledge: get a xoom from a store and flash recovery right away-> everything is good; have the xoom install an ota-update and flash recovery afterwards -> do it this way
Not sure if I'm in the right place, but I cant post under the specific rom thread (post count)
Anyways, I'm running a clean install of Jelly "Beans" Build 5. I updated busybox because it was requested by another program and now my phone wont get past the pink boot logo.
So I have two questions...
How can I fix this?
If it involves restoring/reflashing rom, is there any way to get a number from my recent text messages that didn't yet sync with my online google contacts?
Thanks!
+1
Had this exact problem, I'm on Synergy 118 and tried 6 different times to update busybox each time same problem hangs at bootscreen. Only thing I could do was restore and not update busybox. so far everything works as long as I don't update to the latest busybox, when an app tells me it's out of date I just ignore it. Would love a solution to this!
Just dirty flash your ROM and don't update your busy box this time
Sent from my SGS3 running Eclipse 2.1
that's what I ended up trying, and it resolved the problem.
Thanks!
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
tomisalunatic said:
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Click to expand...
Click to collapse
Try putting twrp back on and flashing stock Lollipop Rom. http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 You can also try aosp, cm12.1 or any other lollipop ROM.
The Lollipop OTA is very picky, I believe any modifications to the stock firmware will cause the update to fail. You will need to have a completely stock system for the OTA to install successfully. Find the correct KitKat firmware for your phone and flash it then try upgrading.
Hi.
I'm having a similar problem with te OTA being picky (topic here).
Is there a stock firmware "file map" so that we can check manually what is wrong and erase/add needed files ?
Maybe this could be done by checking a flashable stock rom ?
Thanks a lot guys.
EDIT : Found a solution here http://forum.xda-developers.com/mot...osing-apps-t2979971/post57658072#post57658072.
Worked perfectly !
OP, I am in the same situation. I did the same as you, and got the same results. Have you managed to solve it? It would be nice if you tell what you decide to do and what's the outcome. Thanks!
tomisalunatic said:
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Click to expand...
Click to collapse
Update to 5.1 success..... erm, well it's all relative
Eventually managed to update my XT1039 to 5.1 via ota.
Started with a fully charged phone and flashed 4.4.4 stock firmware (http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619).
Once completed, powered up phone and signed into google play then updated the motorola update services app.
DO NOT install a custom recovery or root yet or the update will fail!
Start the update by going into settings/about phone/system updates.
After first boot into 5.1, do a factory reset.
To root once the upgrade is completed, download cf autoroot (http://forum.xda-developers.com/moto-g/4g-development/root-xt1039-cf-auto-root-peregrine-t2942406) and unzip to a folder on your pc. Open a command prompt and change directory to this folder. Powerup handset in bootloader mode (hold vol down while switching on), connect USB and run 'root-windows.bat' from the command prompt.
So far I'm hugely disappointed in the update as I use WiFi tethering alot and it appears to be a massive fail. I know it wasn't 100% in 4.4.4 or CM12 5.1 with both reqiuring an occasional reboot, but in 5.1, something's just not right and it's basically unusable (could it be updated radio or something?). Fortunately, USB tethering appears flawless.
Another obsrvation seems to be abscence of a + appearing in the HSPA signal indicator, I seem to be getting just the H appearing regardless.
Also no more bluetooth visibilty timeout setting.
After installing CWM 6.0.5.0, I got gliches with the display in recovery mode but it works.
Now after I have it rooted, ad free and de-bloated, fixed the power on logo and installed CWM 6.0.5.0, I'll stick with it for a while to just to see how the battery lasts.
In hindsight I should've stuck with CM12 5.1.