Kallt_kaffe VaniljEclair RLS11 (CM5.0.8) + new radio - Touch Cruise Android Development

Thanks to Kallt_kaffe http://forum.xda-developers.com/showthread.php?t=700669 for his build : all you want is working very good...
I use the latest DZO kernell http://it029000.massey.ac.nz/vogue/files/?C=M;O=D or the modify file by Kallt_kaffe himself http://forum.xda-developers.com/showthread.php?t=660158 with the the Loserskater NBH editor http://forum.xda-developers.com/showthread.php?t=689812 for choice the good panel for our phone
what is fully good in this build :
- phone of course... and very very fast
- battery : you have to use last kernel of DZO...
- Wifi : no problem
- BT : no problem
- MMS : you can receive and send
- GPS with Igo : a bit slower after first installation
- GPS with Navigon : very fast
- synchronize data ok
- market (I think full but I'm not sure)
- live wallpapers
- and more and more...
I installed in nand.
I use it with ADW launcher : very beautiful and fast !!
I think you have to do all Kallt_kaffe advise for his build work well...
THANKS for them !!
Hope it works for all of Polaris users.
AND you can now upgrade your radio with this version 1.65.38.14
See the thread for this new version here...
Cheers.

manu33xtro said:
Thanks to Kallt_kaffe http://forum.xda-developers.com/showthread.php?t=700669 for his build : all you want is working very good...
I use the latest DZO kernell http://it029000.massey.ac.nz/vogue/files/?C=M;O=D or the modify file by Kallt_kaffe himself http://forum.xda-developers.com/showthread.php?t=660158 with the the Loserskater NBH editor http://forum.xda-developers.com/showthread.php?t=689812 for choice the good panel for our phone
what is fully good in this build :
- phone of course... Sometimes a bit slower when you want to make a call or in a call end (maybe Eclair or kernel... I have make a lot of test but not sure for the results...)
- battery : I don't know why but sometimes I see 30% and a few minutes after my phone is completly discharge !!
- Wifi
- BT : not yet for carkit
- MMS : you can receive and send
- GPS with Igo : a bit slower after first installation but if you use odex file, It's much better
- synchronize data
- market (I think full but I'm not sure)
- live wallpapers
I installed in nand and modify userinit.sh for enable automatic odexing.
I use it with launcherpro : very beautiful and fast !!
I think you have to do all Kallt_kaffe advise for his build work well...
Maybe just one (big ?) problem : I lose sometimes network ! just few minutes but when you want to call... It's a problem : you have to wait few seconds to have a new good signal...
THANKS for them !!
Hope it works for all of Polaris users.
Cheers.
Click to expand...
Click to collapse
I can recommend it, too. For me, it's faster than Myn's Eclair RLS1. By the way, I managed to connect to my car kit successfully out-of-the-box with the latest kernel (.NBH). It experiences some slowdowns when running memory intensive applications and you switch back to, for example, Home Screen, but it's really good.
Congratulations to kallt_kaffe.

Nice!!
Its the same speed level as myns eclair rls 1.
For me its more stable than myns, but maby i made crap ;D
-----
The behavior when stressed is different from myns.. i got these lack untill the homescreen apears too. But overall it looks more stable.
How can i get these dots in the corner to switch home screens?
Can i change the way the middle button(all apps) behaves? In myns there is full screen and all apps are flying in, in this build the slider goes up, but it "feels" a bit small compared to myn :/
(and a offtopic question: nexusmod wallpaper from market dosnt work. is there a nexus like live wallpaper? Cant find the orginal one, i think its not in the market)

This is the only build working Wifi/BT for my Pola100, with PAIPO Zimage of 26/03/2010 !!!
It's a GREAT BUILD ... Maybe a bit slower than Myn's Eclair, but works perfectly!!!
Only a question:
- When I try to install "LAUNCHERPRO" ... AFTER installing nothing change on "Home" Screen. Nothing.
How Installing Launcherpro correctly ?
(My installation is on SD with Haret, Not NAND).
Please any help is appreciated.
Thanks in Advance.

SuperJMN said:
I can recommend it, too. For me, it's faster than Myn's Eclair RLS1. By the way, I managed to connect to my car kit successfully out-of-the-box with the latest kernel (.NBH). It experiences some slowdowns when running memory intensive applications and you switch back to, for example, Home Screen, but it's really good.
Congratulations to kallt_kaffe.
Click to expand...
Click to collapse
I use this version of rom with a brand new battery. I use it about 2 houres, approx. 15 minutes of talk time and small WIFI and the battery is 70 percent. Is there any way increase uptime?
Hi, can you tell me which version of nbh and zImage do you use?

Use latest nbh and wait same days. The dzo kernel recalibrate the battery use.
The power drain is a quite big problem for our device :-(

I think you have to press one time on power button and a toolbox is coming to make your choice for launcherpro.
Cheers.
foxct2005 said:
This is the only build working Wifi/BT for my Pola100, with PAIPO Zimage of 26/03/2010 !!!
It's a GREAT BUILD ... Maybe a bit slower than Myn's Eclair, but works perfectly!!!
Only a question:
- When I try to install "LAUNCHERPRO" ... AFTER installing nothing change on "Home" Screen. Nothing.
How Installing Launcherpro correctly ?
(My installation is on SD with Haret, Not NAND).
Please any help is appreciated.
Thanks in Advance.
Click to expand...
Click to collapse

Hi SuperJMN,
Well I tryed to connect with my audio car : It's ok but no sound, I grew just a breath !!!
Do you have a kit included in the car or like a radio ?
Thanks.
Cheers.
SuperJMN said:
I can recommend it, too. For me, it's faster than Myn's Eclair RLS1. By the way, I managed to connect to my car kit successfully out-of-the-box with the latest kernel (.NBH). It experiences some slowdowns when running memory intensive applications and you switch back to, for example, Home Screen, but it's really good.
Congratulations to kallt_kaffe.
Click to expand...
Click to collapse

I think you should install launcherpro...
dertester123 said:
Nice!!
Its the same speed level as myns eclair rls 1.
For me its more stable than myns, but maby i made crap ;D
-----
The behavior when stressed is different from myns.. i got these lack untill the homescreen apears too. But overall it looks more stable.
How can i get these dots in the corner to switch home screens?
Can i change the way the middle button(all apps) behaves? In myns there is full screen and all apps are flying in, in this build the slider goes up, but it "feels" a bit small compared to myn :/
(and a offtopic question: nexusmod wallpaper from market dosnt work. is there a nexus like live wallpaper? Cant find the orginal one, i think its not in the market)
Click to expand...
Click to collapse

Faster than newest Warm Donuts newest Android RLS5?
Hey guys,
is this android version fastern than Warm Donuts RLS 5?
thanks...

manu33xtro said:
Hi SuperJMN,
Well I tryed to connect with my audio car : It's ok but no sound, I grew just a breath !!!
Do you have a kit included in the car or like a radio ?
Thanks.
Cheers.
Click to expand...
Click to collapse
Manu33xtro, now that you mention it, I connected the car audio but I didn't test it. I'll have to make some tests to see if it works properly. It's a Parrot CK3100-LCD.

New build : Cm5.0.8
Maybe yes but you should test it...
And now Kallt_kaffe has release a new build port of CM5.0.8 : I will test it right now
Cheers.
Pr3d1ction said:
Hey guys,
is this android version fastern than Warm Donuts RLS 5?
thanks...
Click to expand...
Click to collapse

manu33xtro said:
Maybe yes but you should test it...
And now Kallt_kaffe has release a new build port of CM5.0.8 : I will test it right now
Cheers.
Click to expand...
Click to collapse
i'm so curious about it !!

Hi,
What version of IGO you are using? Where did you get 320x240 version? I have found modified data.gro, but still not perfect.
Usnig this build since RL2. Some remarks:
- overclocked with Rogue tools to 450 MHz -> runs smoother. But phone must be charged every day.
- cant understand the logic how calls end. Some times it ends exactly after caller disconnects. Sometimes no, disconnects after some time.
- WiFi on/off. My network has hidden SSID. WiFi turns on, but don't connects to network. I have to go Settings -> WiFi settings, and then phone connects to network
- GPS works, but sometimes looses satelites. Can be fixed with phone restart.
- Battery on RL3 stuck on 100%
Phone working, SMS working, battery life is ok for me.
Update:
with RLS5 looks like phone don't charges -> stuck on 15%

Leryan said:
Hi,
What version of IGO you are using? Where did you get 320x240 version? I have found modified data.gro, but still not perfect.
Click to expand...
Click to collapse
Hi,
where did you find the data.gro file on your phone?!?!

Data.gro is located: /data/data/com.navngo.igo.javaclient/data.gro
I can send you pm with link to modified file tomorrow.

Try it right now : much better than RSL3b... I will post my test later (after more test...)
chourmovs said:
i'm so curious about it !!
Click to expand...
Click to collapse
The last version : 139242 (look at PPCWAREZ). But like you, the data.gro is not perfect and I find IGO a bit slower and lose sometimes the GPS position ! I will try with the CM5.0.8.
- I doesn't use overclocking
- same effect for calls but i think it's better with this last build : I wait to do more tests
- Wifi works good !?! I see all networks... Maybe with the last kernel ??
- same for us, the battery life must be better : DZO know this problem
Leryan said:
Hi,
What version of IGO you are using? Where did you get 320x240 version? I have found modified data.gro, but still not perfect.
Usnig this build since RL2. Some remarks:
- overclocked with Rogue tools to 450 MHz -> runs smoother. But phone must be charged every day.
- cant understand the logic how calls end. Some times it ends exactly after caller disconnects. Sometimes no, disconnects after some time.
- WiFi on/off. My network has hidden SSID. WiFi turns on, but don't connects to network. I have to go Settings -> WiFi settings, and then phone connects to network
- GPS works, but sometimes looses satelites. Can be fixed with phone restart.
- Battery on RL3 stuck on 100%
Phone working, SMS working, battery life is ok for me.
Update:
with RLS5 looks like phone don't charges -> stuck on 15%
Click to expand...
Click to collapse
You have to use root explorer or apk like this to replace the file...
Leryan said:
Data.gro is located: /data/data/com.navngo.igo.javaclient/data.gro
I can send you pm with link to modified file tomorrow.
Click to expand...
Click to collapse

Phone charged - left the phone charging over the night.
But when i connected charger, al least for 1/2 an hour, battery level stay at 15%. Maybe battery fallen below the critical level.
WiFi is working ok, when connected But when I turn it on, i have to go Settings -> WiFi settings. Otherwise nothing happens.
Update.
dzo released a new kernel, flashing right now

Leryan said:
Phone charged - left the phone charging over the night.
But when i connected charger, al least for 1/2 an hour, battery level stay at 15%. Maybe battery fallen below the critical level.
Click to expand...
Click to collapse
that's a classical eclair's build issue
Be patient, try some reboot and connect/deconnect your charger and after some charging/decharging cycle, battery accuracy will be better

slow..compare to incumbus, even after set cpu speed to 450

Related

[Public Beta] Crossbow Reloaded 1.7.1

Ok, I'm posting this in its own thread as people seem to have missed my post earlier today as it got buried in the Crossbow Reloaded 1.7 thread:
I've uploaded a test rebuild (couldn't sleep last night and was up early this morning). This is version 1.7.1 . The differences to 1.7 are:
A lot of the compression I did in 1.7 has been removed
Adobe Reader Removed due to the compression on other things making the rom too big
AltTab added and is mapped to the Comm key (this should fix the problem with Voice command people complained about).
Now built with the Core Kitchen
A few other things that I don't remember now
People that have had the dialpad issues in the 1.7 release are what this is really aimed at. If 1.7 was working for you, then stick with that version (unless you need to have a flash "fix" ). I've flashed 1.7.1 to my phone and so far it seems fine, but I really haven't tested it much, so consider this a public Beta. [Edit... Been on my device all day today and so far no issues that I've seen, but then 1.7 was fine for me too...]
I reserve the right to pull this off of RapidShare if I find something I don't like or if others find the keypad issue still exists (I'll post if I do this). Please do NOT MIRROR this without my permission as this is NOT an official release but one I'm trying to see if it fixes the issues with 1.7 that some have had.
Download Link:
Crossbow Reloaded 1.7.1
Please post feedback in this thread. I want to see if the keypad issue is gone now (mainly).
.
The new version is brilliant. I'm loving it so far.
Thanks man.
Does it Have Pocket Outlook?
If it doesn't how do I add it back. Ta, Rin.
Wise choice with the kitchen lol
Thx for mentioning. It makes me proud to hear/read that
I hope it didn't gave you any more trouble.
Did you already started to modify it not to use default install ? Cos if you didn't i'd suggest to wait a day at most ..i am trying to rebuild it. That thing bothers me too.
Running smooth!
I really liked the reloaded 1.5, was running the reloaded 1.7 version, liked it a lot exept the comm button and some OS stalls.
Flashing the 1.7.1 version now and will let you know how it's going in this threath. Also curiuos how the core kitchen is doing
After 30 minutes flashing I killed the shelltool. Since the phone seems stuck I gave it a soft reset and it booted with WM6 splash screen referring to farias rom. Gave it a factory reset and it seems working. Don't have acrobat so I asume it's the 1.7.1 version. Will start working on it now.
Weatherpanel, cybercom voice dialing, tomtom all running smooth. Some little tweaks (I changed under HKLM\SoftwareMicrosoft\Bluetooth\A2DP\Settings the key "Bitpool" and MaxSupportedBitPool to "40" decimal for my Jabra 620) and no problems sofar. Now do some VOIP settings. It never worked, now it's time to get it working on my private asterisk
Ok, working on with the new Beta rom I had some stalls (Three). Green light blinking only no responsive power button. After a reset I repeated my actions before the stalls only I couldn't reproduce it. Since about twelve hours of usage no problems
Mirror the download, please
Can someone mirror the download to some where else? Rapidshare is SUCK.
Flashed it 30 minutes age, installing soft right now, and everything seems to be ok. I had problems with dial pad in 1.7, but in this its ok. Will post in case of any issues
A new 100mbit mirror
Yo mfrazzz, got you a mirror again:
Mirror
TheWizzard2203 said:
Yo mfrazzz, got you a mirror again:
Mirror
Click to expand...
Click to collapse
Thanks for that mirror, but nobody else mirror this for now. I'll wait a day or so for reports of problems then decide if its the final version.
If you flash this and it works fine, please post that. If there are problems with the rom, please post those.
testing new version... no probls found...
Same here, just flashed it and testing now. So far the dialpad issue looks to be resolved. Not certain yet, will post problems that occur.
Nice rom
fast and easy to use
BUT...
I think i have a pb with my battery
lose 5% by hour ... is it normal?
ps : but all is perfect
I just had time to come back to XDA since I loaded CBR 1.5.
I have had the dialpad issues in 1.5 and thought it was just additional software I added. The device didn't lock up and all other functions worked.
The solution I found that worked was to pull the battery for one minute, then do a soft reset once it booted up.
Will load 1.7.1 tonight.
Thanks and keep up the good work!!!
ndoeberlein said:
I have had the dialpad issues in 1.5 and thought it was just additional software I added. The device didn't lock up and all other functions worked.
Click to expand...
Click to collapse
You had dialpad issues with 1.5??? Nobody has ever reported that (that I remember), and 1.7.1 is directly built off of 1.5 (thats before I used compression or anything. 1.7.1 does use compression on a few things, but very minimal compared to what I did with 1.7). While there were definetly dial pad issues in 1.7, I think if you did have dialpad issues in 1.5, it truely was due to 3rd party apps, or tweaks on your phone.
Please report back how 1.7.1 works for you. Overall I'm happy with it, but I felt 1.7 was actually a faster rom than this one (there are times this one feels slightly slugish in places and I may have to turn on overclocking (where I never considered overclocking 1.7)).
So far 1.7.1 is looking good (but so did 1.7 for about 24 hours). I may make this an official release as is if I don't hear anything before tomorrow evening.
kwanice said:
Nice rom
fast and easy to use
BUT...
I think i have a pb with my battery
lose 5% by hour ... is it normal?
ps : but all is perfect
Click to expand...
Click to collapse
I am running version 1.7 but the battery life on this build is superb. Today I only made one call, left push E-Mail on a turned WiFi on and off a few times. After 13 hours I was down to 98% ! This is with a one month old battery.
How old is your battery ? Mine started to fail after 14 months.
i have not had any problems yet. It's great! will let you know a few days if I ran into any problems.
Voice command issue is it gone?
Hi mfrazzz,
Thanks again for another new version.In the previous version I reported one issue with voice command. Is that resolved in this version.
Issue was the voice command could not be activated using bluetooth headset. I have seen the keypad issue in 1.7 and sometime few error messages as well.
banerjeez said:
Hi mfrazzz,
Thanks again for another new version.In the previous version I reported one issue with voice command. Is that resolved in this version.
Issue was the voice command could not be activated using bluetooth headset. I have seen the keypad issue in 1.7 and sometime few error messages as well.
Click to expand...
Click to collapse
There was no issue with Voice Command and BlueTooth headset in 1.7 that I know of. I have a Plantronics Voyager 510 BT headset and a Bluespoon Spider stereo (A2DP) BT headset, and both pair up fine, and both control Voice Command fine for me. I know others using 1.7 and BT headsets worked fine with Voice Command for them also. It could be an issue with your headset and WM6, 3rd party software, or something else.
The only Voice Command issue I know of in 1.7 was that there was a button mapped by default that wouldn't work properly. I fixed that so that the Voice button (Button 4, upper right side of phone) now maps to AltTab app. AFter you install Voice Command it will map to your Messages button (button 1), but thats how Microsoft installs it, not my doing. You can then redo the buttons in Settings > Buttons and you are good to go (although I really like AltTab now, so I left it on Button 4 and only use Voice Command via my BT headset).
i had problems with 1.7...in that i the dialpad keys disappeared after first flash. i did a clear storage (1234, etc) and the dialpad came up. flashed this version (downgraded to official t-mobile 2.26, as I always do first) and i don't seem to have the same problem. everything was in working order the first time around. the rom actually feels a bit faster than 1.7. thx.
monkey_knight said:
i had problems with 1.7...in that i the dialpad keys disappeared after first flash. i did a clear storage (1234, etc) and the dialpad came up. flashed this version (downgraded to official t-mobile 2.26, as I always do first) and i don't seem to have the same problem. everything was in working order the first time around. the rom actually feels a bit faster than 1.7. thx.
Click to expand...
Click to collapse
if I wanna flash to the official t-mobile rom first can I use the rom program of t-mobile itself?
RUU_Prodigy_2210205_22102108_021911_TMO_NL_DUT_Ship.exe is my default rom I think

Is Incubus26Jc's Super Eclair suitable for Polaris ?

I was wondering if the Eclair version from http://forum.xda-developers.com/showthread.php?t=670240 is suitable to be used with Polaris, using the nbh from here http://forum.xda-developers.com/showthread.php?t=660158
It seems like people say good words about this build. Anyone tried it yet ?
Tried it today. I think it's fastest Eclair build for polaris i've tried. After some time of use it becomes almost as fast as donuts.
Anyway there is no wifi and bt. Wifi starts but does'n show any networks. It crashes regulary and reboots. No data with 3G... e.g. no data at all.
Tried with 29-04-2010 kernel (because of ADB support) without any updates.
Will try with paipo's kernel shortly.
UPD: with paipo's kernel it at least tries to scan, and return an error "Unable to scan for networks". With dzo's kernel it didn't scan at all.
idreadful said:
tried it today. I think it's fastest eclair build for polaris i've tried. After some time of use it becomes almost as fast as donuts.
Anyway there is no wifi and bt. Wifi starts but does'n show any networks. It crashes regulary and reboots. No data with 3g... E.g. No data at all.
Tried with 29-04-2010 kernel (because of adb support) without any updates.
Will try with paipo's kernel shortly.
Upd: With paipo's kernel it at least tries to scan, and return an error "unable to scan for networks". With dzo's kernel it didn't scan at all.
Click to expand...
Click to collapse
Failure! oh dear.
It's not only the build, but the kernel that has to be "shaped" for us.
I tried it but no way for Wifi... Bt works but to use all the days : no for Polaris users
Cheers.
alinescoo said:
I was wondering if the Eclair version from http://forum.xda-developers.com/showthread.php?t=670240 is suitable to be used with Polaris, using the nbh from here http://forum.xda-developers.com/showthread.php?t=660158
It seems like people say good words about this build. Anyone tried it yet ?
Click to expand...
Click to collapse
i try this one at the moent but i don"t have any data connection
is this the same by your side ?
good news...
I use it for now with the latest kernel (zImage) of DZO : 29/04/10. I've not tested the latest nbh !
I have BT works (not audio in my car) but not yet Wifi : Incubus26Jc work a lot to include the latest fonctional driver for us
I've not tested GPS.
you can now move up or down the volume for hear sound of the phone and more...
But I can't test data connection because I doesn't have data plan with my operator...
Cheers.
chourmovs said:
i try this one at the moent but i don"t have any data connection
is this the same by your side ?
Click to expand...
Click to collapse
Great news!
With the new nbh files for polaris from dzo, (from 2010-05-07) it works great!
got bluetooth working except for the fact that it breaks connections all the time..
Wifi not working but it seems the whole incubus26jc supereclair version currently has wifi broken!
But I strongly recommend that nbh from dzo
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
the upper files are for polaris!
Good luck everyone!
dannyliemburg said:
Great news!
With the new nbh files for polaris from dzo, (from 2010-05-07) it works great!
got bluetooth working except for the fact that it breaks connections all the time..
Wifi not working but it seems the whole incubus26jc supereclair version currently has wifi broken!
But I strongly recommend that nbh from dzo
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
the upper files are for polaris!
Good luck everyone!
Click to expand...
Click to collapse
Have you tried the new androidupdate.tar that allows wifi and BT? At least it works for Myn's Warm Donut! it's available to download here (thanks to DZO)
http://forum.xda-developers.com/showpost.php?p=6429076&postcount=3359
Install the update in the usual way.
dannyliemburg said:
Great news!
With the new nbh files for polaris from dzo, (from 2010-05-07) it works great!
got bluetooth working except for the fact that it breaks connections all the time..
Wifi not working but it seems the whole incubus26jc supereclair version currently has wifi broken!
But I strongly recommend that nbh from dzo
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
the upper files are for polaris!
Good luck everyone!
Click to expand...
Click to collapse
and do you have workin data connection with it ?
It's broken for me (only upload arrow...)
Have you guys tested the RLS5 ? It is from 8 may
RLS5 Features
- Much Faster System
- Extra Apps and Widgets are Now Optional
- Fixed Full Market (Thanks Pandemic187)
- Fixed Lockscreen Not Showing Up
- Fixed Power off option on red button (Reboot option still not functioning)
- Fixed Kaiser Wifi (Tested)
- Atttempt at fixing Apn Problem
- Fixed Voice Search Crash Problem
- Added More Stable Live Wallpapers To App Pack That work without Crashing on Sleep
The Donut version I've tried seemed very fast for me. The screen responsed much better then the WinMo. But when it was to making something else, opening a program, the browser, market... most of the time I get the screen with not responding to kill the app. How is this new release ? Faster or slower then Donut ?
It doesn't work booting from NAND with the latests .NBH. Does it?
alinescoo said:
Have you guys tested the RLS5 ? It is from 8 may
RLS5 Features
- Much Faster System
- Extra Apps and Widgets are Now Optional
- Fixed Full Market (Thanks Pandemic187)
- Fixed Lockscreen Not Showing Up
- Fixed Power off option on red button (Reboot option still not functioning)
- Fixed Kaiser Wifi (Tested)
- Atttempt at fixing Apn Problem
- Fixed Voice Search Crash Problem
- Added More Stable Live Wallpapers To App Pack That work without Crashing on Sleep
The Donut version I've tried seemed very fast for me. The screen responsed much better then the WinMo. But when it was to making something else, opening a program, the browser, market... most of the time I get the screen with not responding to kill the app. How is this new release ? Faster or slower then Donut ?
Click to expand...
Click to collapse
But no wifi for polaris....!! fixed only for kaiser
Did you try with latest bt/wifi fix?
l1q1d said:
Did you try with latest bt/wifi fix?
Click to expand...
Click to collapse
i think so...if it´s the latest..?
post 175....the included update...
http://forum.xda-developers.com/showthread.php?t=651856&page=18
and this:
http://forum.xda-developers.com/showpost.php?p=6086521&postcount=100
kind regards..Alex
I will try to see if it boots from nand.
Edit: Doesn't work with latest nbh.
trouble2000 said:
I will try to see if it boots from nand.
Edit: Doesn't work with latest nbh.
Click to expand...
Click to collapse
Do you mean that it boots and the interface loads OK, but wifi doesn't start?
No, it boots and then i get a black screen and nothing happens.
chourmovs said:
i try this one at the moent but i don"t have any data connection
is this the same by your side ?
Click to expand...
Click to collapse
After sometime, 3g data connection has been auto-configured without APN entry
whatever, that's a good news since data connection is more reliable than with myn 's last release with latest dzo's kernel
After saying that, that's an eclair build with all it's advantage: better readability even in 120 lcd density and better resolution management, better menu and 3d ability....
I was able to run copilot too with a good gps signal
The main issue (as always with eclair build at the beginning ) is battery lifetime
hope it will go better
Let's have fun !!
Has anyone make wifi work with this build for NAND?
I installed it today and it was really fine, but when I apply the latest wifi/BT, it doesn't boot (the android logo cycles indefinitely).
+1 ... same problem here.
SuperJMN said:
Has anyone make wifi work with this build for NAND?
I installed it today and it was really fine, but when I apply the latest wifi/BT, it doesn't boot (the android logo cycles indefinitely).
Click to expand...
Click to collapse

[Tweak]Superb Fast GPS Fix!

Hello all,
I am writing this topic to let you all provide of this super tweak! Here I show you how to get this fix. With this tweak I got a gps fix within 10 seconds(under clear sky), better, more, faster satellite fixes.
First I used this tweak:
http://forum.xda-developers.com/showthread.php?t=427888
(I suggest you to first hard reset, and then apply the tweak. But I guess it will also work right if you don't) Do everything EXACTLY like the tweak says. If you don't do it right. It might fail.
Next tweak.
I found this tweak when I was searching for tweaks for my Samsung Omnia. I found this application. I have tried my gps first before installing this application. It was a weak signal and I could only find like 4 satellites and it took me like 15 minutes to get a fix. But when I applied this application, I got a fix withing 10 seconds!!! And with at least 7 satellites!! Here is the application;
http://www.mediafire.com/?zilthagdhey
Settings:
In settings/system/External GPS, The GPS Program port is COM4, No Hardware port and a Baud rate of 9600. In GPSModSettings(Found in main program folder) I have set; log file, Extended, Smooth to blank marker, Sleep time 1000 GPSModDriver to Comport 1 and enabled.
Then scroll a down a bit for the next settings.
GPSID External GPS to Com Port 4 and enabled.
Congratulations, You have done the tweaks now! I hope it works right for you guys and good luck with navigating!
PS I am using radio: 1.02.25.32.
What application??????????????????
Rhodium500 said:
What application??????????????????
Click to expand...
Click to collapse
Sorry, I edited it.
anyone confirmed this???
You could try it yourself. The tweaks are just default. So that would be thrustable.
Is the test really valid ?
Once i have a fix in an any application (no matter how long), if I quit then start another application and use the GPS, i got a fix in 10 seconds. Wait a few hours between your tests
no wayyy to be so.....
guys it is only me who didn t get this,or u still don t get the picture.GPS isn t need a fix.The phone is **** as it comes out the HTC factory.BUT!!!
u need a new radio rom,and no more problem with GPS I personaly use TAE rom and since that moment my GPS problems are past!!!!
So if u have time just create fixes,but .....WHY?? Flash and enjoy!!
helios (who read other posts and learn.No fixes)

Gps - Programs, time to fix, questions

This is a general thread about gps on polaris,so if you have question feel free to post it!
I made the first:
i try latest version of nbh (01-06-10) by dzo (but Kallt_kaffe too), using gps test and after 15 min i can't fix my position.
Any ideas?
seems to me it always make a "cold start"...
28-05 nbh gps wworked very good
Also having similair problems with GPS
I'm using cygic navigation and after +/- 10 minutes program hangs and doesn't reconnect
Same problem with different versions of android (all tests with DZO 01-06-10)
No problem with aqtrans and latest dzo...
It might be a myn's warm donut bug?
@iseeka what system do you use?
-------------------------------------
Sent via the XDA Tapatalk App
l1q1d said:
It might be a myn's warm donut bug?
@isekaa what system do you use?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
myn´s too... maybe it´s time to try eclair... even without camera
iseeka said:
seems to me it always make a "cold start"...
28-05 nbh gps wworked very good
Click to expand...
Click to collapse
even wierd, i cannot androidinstall with 1-6.nbh. got into blank screen, and stays there. flash it twice with task29 still not working. than i get back to 24-5.nbh and it works
till the moment the faster gps fix i have seen is with the nbh of february, but you miss all the updates in the other apps...
i could downgrade from 1.06 to 28.05 nbh normally without reinstall system, but still slow.
only difference is that seems to find more satellites with more strenght...but fix 5 or 6 minutes.
new kallt kaffe to try today
http://forum.xda-developers.com/showthread.php?t=660158
l1q1d said:
It might be a myn's warm donut bug?
@iseeka what system do you use?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
l1q1d
i noticed your signiture link to dzo panel3.nbh but your's is pola100. which means you should only can use panel1. how you do it??? i just noticed that why it does not work on my polaris as mine only work on panel1
sorry saw your answer here http://forum.xda-developers.com/showpost.php?p=6587528&postcount=4
I'm going to try this too....
chourmovs said:
new kallt kaffe to try today
http://forum.xda-developers.com/showthread.php?t=660158
Click to expand...
Click to collapse
dow we need to change libgps too?
@ahhl
I think that dzo release only one nbh in the future and we have to use Loser's NBH Editor v3.0 to change panel type in the future.
which android is ver 2.x
myn rl5 still ver 1.6 isn't it?
what else we can run on our polaris? i am willing to try. so far only myn rl5 work best in term of speed, workable gps, bt,wifi.
Tried Aqtrans' CM-5.07 V1.3
First GPS fix ... a lot of time
but later it makes hot start and get a fix in 4-5 secs
Suffering eclair problems though....
6-7 sec to open phone dialer
no camera..
GPS TESTS
Hi, I made a several test with GPS... I used GPS Test application. In many times the GPS Test show that the phone has got for example 5-6 satellietes "in view" but zero "in use", so it couldn't lokate the position etc. Sometimes it helped that I turn off the phone, remove the battery for 10s and after that sometimes the phone can "use" the satellites for positions but only until the phone goes to sleep, after wake up the phone again dosn't use any satellites... :-(
[Pola100] ; [NAND] ; [Myn’s Warm Donut RLS 5 - 04/24/2010] ; [DZO nbh 24-05-10 panel1] ; [bt/wifi fix update]
i resolve the problem change completely my setup
Today I tried NAVIGON 7.
It works, but with a lot of problems:
- Sometimes it freezes all system (only a reset can resolve)
- Very slow on menu
- GPS position is missed for some seconds, then is fixed for some seconds, then is missed for some seconds (and so on.... fixed/missed).
My setup is Vanilj Rls5 with zImage 29.04.10 and 2 Gb (1.30 Fat32, 256 ext2, 256 ext2). But My Fat32 partiton has very very few space free (5 Mb Free).
Any suggestions ?
Remove some maps
I have Only Italian Maps on Navigon.
My SD is almost full because in the same Partition Fat32 I have WinMo and Android data on SD (but for Android I selected System and Data on Ext2).
I will try to make more free space... but i don't think this is problem.
jhe1983 said:
Hi, I made a several test with GPS... I used GPS Test application. In many times the GPS Test show that the phone has got for example 5-6 satellietes "in view" but zero "in use", so it couldn't lokate the position etc.
[Pola100] ; [NAND] ; [Myn’s Warm Donut RLS 5 - 04/24/2010] ; [DZO nbh 24-05-10 panel1] ; [bt/wifi fix update]
Click to expand...
Click to collapse
I'm getting the same problem using: Incubus26Jc's Super FroYo 2.2 [Deodexed] [RLS11] [7/16/10]
Wait, gps take much time to recover position from a cold start.

Photon 2.2

Accumulator work is increased
It is less than device lags
More appendices work more stably
version sense
http://narod.ru/disk/27678808001/Final 2.2.rar.html
http://www.fayloobmennik.net/1046243
test
in this relase new update
thanks!
djfastest said:
http://narod.ru/disk/27678808001/Final 2.2.rar.html
http://www.fayloobmennik.net/1046243
test
in this relase new update
Click to expand...
Click to collapse
thx a lot!
Could you briefly explain what is new in this release?
Sources? Changelog? What is working, what not?
djfastest said:
http://narod.ru/disk/27678808001/Final 2.2.rar.html
http://www.fayloobmennik.net/1046243
test
in this relase new update
Click to expand...
Click to collapse
what is new in this relase?
please provide description for this. thanks!
Tested this ROM,
It's working well.
Fast & stable
The same big bugs we have in R169 or Munjeni roms: BT , FM radio, video , etc
Problems with Data connection : 3G , etc.
To resolve it i must remove telephony.db in the update directory.It's taking it from the 3g fix but not working for me.
EDIT : When i start wifi and stop it Data connection don't start.
Regards.
cbolumar said:
Tested this ROM,
It's working well.
Fast & stable
The same big bugs we have in R169 or Munjeni roms: BT , FM radio, video , etc
Problems with Data connection : 3G , etc.
To resolve it i must remove telephony.db in the update directory.It's taking it from the 3g fix but not working for me.
EDIT : When i start wifi and stop it Data connection don't start.
Regards.
Click to expand...
Click to collapse
also more bugs as in R169 and munjeni,
in R169 and munjeni's release no problems with BT, FM radio, 3g data.
sooo conclusion?
DjFastest,
Thanks for this new thread, but now.. could you please write info about it? is that yours? you're developer? or what's the changes had made?
Great verion, really fast and stable !!
No problems with data connections for me
Looks like the "cardsharing version" but the problem I had with that version (big time bug) is not with this version..... ok a small one (8 minutes in 12 hours) but for that I use ClockSync
Wilco
wilcoo said:
Great verion, really fast and stable !!
No problems with data connections for me
Looks like the "cardsharing version" but the problem I had with that version (big time bug) is not with this version..... ok a small one (8 minutes in 12 hours) but for that I use ClockSync
Wilco
Click to expand...
Click to collapse
more things that are better? also it is faster and stable. can i mix it with R 169? because in de startup.TXT i see also update from R169
any other links.
Can't understand what the download site says
Hello I get stuck to writing what to do?
wilcoo said:
Great verion, really fast and stable !!
No problems with data connections for me
Looks like the "cardsharing version" but the problem I had with that version (big time bug) is not with this version..... ok a small one (8 minutes in 12 hours) but for that I use ClockSync
Wilco
Click to expand...
Click to collapse
Same for me: I have the slightly faster time whereas 169 was ok, without being connected to charger. Furthermore no bigdifferences seen.
Ok thank you pwel so there are no big difference
Sent from my HTC Liberty using XDA App
differences with R169
My main differences are:
1) time running too fast in this one. Since I don't have data connection and not always wifi, clocksync does not work.
2) battery consumption is less: it takes now longer for the battery to run dead as compared to R169
3) somehow my agenda notifications do not show up when display is off: it seems it is in a deep sleep (maybe that;s why it uses less battery power?)
seems faster than 169. still observing for bugs.
iamwin said:
seems faster than 169. still observing for bugs.
Click to expand...
Click to collapse
ok, that his version is faster is very good. also the battery goes longer is very good. But problems with 3G connection is a annoying bug

Categories

Resources