For a while now my Portable Internet Explorer mobile or QuickGPS won't connect. I thought only the QuickGPS was the problem but then someone on the forum indicated that I check out iexplore.exe and lo and behold it also wasn't connecting. Not with wifi, gprs or even activesync. I'm loath to try a hard reset but I really want them to work (especially the quickgps).
Am using an original Polaris windows 6.1 rom.
Radio 1.58.26.20
The actual error says, "The address is not valid. Check the address and try again."
This occurs whether I'm connected with Activesync, wifi or EDGE/3G/GPRS. As a result, my QuickGPS won't connect either. HELP!
Fiddling around in AdvancedConfig has brought my Internet Explorer back into working status but am not getting the same luck with QuickGPS updates.
Am still getting "Connection failed. Please try again." So am trying to find a good guide on what to do to fix it but the forum isn't very forthcoming.
(BTW am replying over and over so that my efforts can be a guiding light for others, and hopefully I'll get a reply that will help me finish this.)
Did you sync it to a PC with proxies? the phone will automatticly use them, if you did, try disabling them
How I go about that? Cuz I sync it to my PC alot but am not sure if I sue proxies.
"Start, Control Panel, Internet Options, Lan Settings" if the boxes are filled in, you use Proxies
Nope. And let me reiterate, I've got Portable Internet Explorer working again but QuickGPS still isn't.
Related
I flashed my tilt to an htc rom and I'm now having problems getting on the internet. Is there some place where i could find a cab file with at&t settings or anywhere I could find the settings and enter them by hand. thanks
still looking. thought I found a solution but it was for hermes.
try this network config...
thanks a lot. that seems to have done the trick.
turns out it didnt fix the problem. i can connect to the web via PIE but for some reason I can't get either gmail or windows live to connect. I don't know why it would work for some but not others.
Same problem
I am having the same issues too. IE and outlook mailbox can connect without any problem to the internet. Gmap too.
However, I am having problem with fring and skype applications. Anyone experiencing this issue?
I have flashed my Tilt with the original HTC Kaiser rom.
i think i might have the solution for ya...change the isp.cingular to wap.cingular
I'm having all sorts of problems, too. Very odd. I don't understand how it can work one minute, then not the next.
One thing that has seemed to help is to use the advanced configuration tool to keep the connection active all the time.
It's under Connections > Connection Always On.
Keep in mind, I had to choose MEdia Net. When I chose "My ISP GPRS", I couldn't connect at all....
I'm having the same issue. I didnt notice it until now with Fring. Over WIFI it works, over 3g it says cannot find internet.
I checked and my settings are already on the wap.
So other ideas?
I've also been having intermittent luck with the settings on my TILT flashed to HTC ROM.
One way I got around it for a while, was to connect to Pocket Internet Explorer to get the connection setup, then hop on Google Maps/MS Live Search/etc.
I also had this problem with MiniMo and Opera for a while. Eventually it all just worked itself out I guess. Also, make sure your 'proxy' settings don't get messed up. Sometimes I'll go into the connection settings and the "This connection uses a proxy" is checked... I'll go back in later, and it won't be. Not sure what the conflict is.
skola28 said:
I've also been having intermittent luck with the settings on my TILT flashed to HTC ROM.
One way I got around it for a while, was to connect to Pocket Internet Explorer to get the connection setup, then hop on Google Maps/MS Live Search/etc.
I also had this problem with MiniMo and Opera for a while. Eventually it all just worked itself out I guess. Also, make sure your 'proxy' settings don't get messed up. Sometimes I'll go into the connection settings and the "This connection uses a proxy" is checked... I'll go back in later, and it won't be. Not sure what the conflict is.
Click to expand...
Click to collapse
Here is a solution.
When you create settings using the Wizard it puts 2 connections. 1 MY ISP and the other MEdia Net.
GO to Settings -- Connections -- Connections -- Advanced -- Select Networks -- First drop down box make sure that My ISP is selected then click ok up top.
Try it and see if it works now.
If it doesnt select MEdia Net as the default connection and edit it, remove proxy and see if it works now. If still no luck remove MEdia Net from one of the connections, by managing existing connections tap and hold and then click delete. Then set MY ISP as the default connection in advance --select networks.
Good Luck.
That took care of it..
Actually what took care of it was going into the media net settings and unclicking the proxy settings..
It was using a proxy to connect but no server in the box. I clicked and whammo works now!
Thanx
same issue
Just wanted to mention had the same issue (particularly with skype) and made the change mentioned further up in the post about changing the connection setting from isp. to wap. and now skype works like a charm, thanks!
please help me aswel
i had my tytn ii , unlocked from orange and am now using o2, gprs aint workin, dno wots up, iv spent hours surfin the web and entered tonnes of variations of the manual grps settings ie access point name = ... username password . neway these didnt work! phoned o2 they said they dont have the settings to send me. can ne1 help?
Hello!
I'm new here, please bear with me... Also i'm norwegian, which i will use as an excuse.
Well, to the point...
I currently have vjgraces WM6 v3.7 on my Tornado (qtek8310).
In my SMS inbox the left softkey is "delete", but in WM5 the left softkey is "new". Is there any way to change this?
Also, in messaging "app", is there any way to add Hotmail as a option there, as I could in WM5?
Jarle
edit: these are not critical problems, I can learn to live with it. I just got MSN to work over wifi also, so the hotmail-issue is not so critical. But i would be nice to have the e-mails on the phone tho.
Also, anyone got a good notepad-app to recommend?
edit2: Got a lot on my mind today...
IP Phone. Does it ever work? In the Settingsmenu in Comm manager it doesn't work to select ip phone, and i cant find it in start->settings->connections.
Is this option disabled? Would be great to call for free in wifi-zones.
Sorry if a lot of my questions are noob and such, but as i said, im norwegian.
Also, (lots of alsos here today), before, with WM5, if I had the phone connected to my computer with USB, I could surf on the phone using the computers internett connection. Now I cant, why?
i can help you with the internet thingy but not on the other stuff,if you want to use your desktop connection for you wm phone just got to settings/connection/advance and set everything there to automatic that should let you use your desktop internet connection on your wm phone.
It is set to automatic on every option, but it still download over edge.
Anyway, thats not a big problem, its not often I use internett on my phone when its connected to PC anyway, but thank you for your help.
Also, anyone got a good notepad-app to recommend?
I use PocketNotepad by Tillansoft. Freeware, no troubles noticed yet.
JoLe
Your 'Pass through Internet' issue
For your internet connectivity issue while connected to PC, please try this:
In 'Active Sync', go to File - Connection Settings.. The field, 'This computer is connected to:' must have the selection 'The internet'. If you made a change here, close Active Sync, restart the PC, connect the device and try.
You may be interested in these: If you use Wndows XP, search for the topic 'Residential Gateway' in Help and Support. Also look for 'Desktop pass-through overview' in Active Sync Help topics. Hope it helps.
JoLe.
Thank you Jole. I had the 'connection settings' in ActiveSync set to Automatic before. I changed it to Internet, and it works like a charm!
Going to test PocketNotepad also.
Ok so every time I try to connect to my GPS via Google Maps and Live Search my phone trys to connect to "MY ISP GPRS" and I get:
Dialed isp.cingular
cannot connect
error. I do not know why it does this. I have tried to remove hidden proxy still does it. tried restoring hidden proxy still the same. manually connected to COM4 still the same thing.
I have no GPS, is there a fix to this?
Also I am using ALEX's WM 6.1
first off what operating sys are you on att..vodafone..etc??
it looks to me that you have att...well you would first need to get the cab that you can find around here just search that would set all of your internet configuration....also with all these 6.1 roms there has been a problem with gps that has not been solved yet.....but fyi google will use your gps plus your operators internet to get access....it used both so if you dont have internet google is no good.....after that you just need to sit tight until one of these great chefs find the gps prob on 6.1...if you cant wait revert back to 6.0 for now....also check your radio version i think that has to do with a lot with gps also!!!
search search search...thats the way of the gods!!!!
good luck!!
thanks i have been looking for a while I may go back to 6.0 for a minute until everything is fixed.
I had this problem too. I performed a hard reset and didn't allow the connection setup to run. I entered the data conection info by hand. I also only have the single my isp created. it just points to wap.cingular
I also haven't turned on a-gps in schaps adv config.
so far no issues with the dial error cropping up.
pm
Settings in my sig. If you didn't find it already.
~~Tito~~ said:
Settings in my sig. If you didn't find it already.
Click to expand...
Click to collapse
lol good job tito....i need to take some time and put links up in my sig for these types of situations.....just a little busy or lazy...which ever one you preffer....hehe
I am both. What ever mood I feel like XD.
The Problem: I cannot get Exchange to sync correctly when using any 6.1 ROMs.
AT&T Tilt
AT&T SIM
Exchange 2003
Radio: 1.58.26.20
I really need to be able to Exchange sync in order to accomplish my job. From reading though the many 6.1 threads and searching around, I have found that people seem to be occasionally running into this problem, but there hasn't been any resolutions mentioned yet. The problem for me is that synchronization will not occur in ActiveSync. At one point, it would sync my contacts even though it said the sync failed. Others have reported that it will sync contacts and calendar but not email.
The Active Sync error code that I get after flashing a new 6.1 ROM and setting up Exchange the normal way is:
Result: Synchronization could not be completed. Try again later.
Support Code: 0x80830003
Here is a list of things that I have tried so far from searching and asking around that did not work:
1. Didn't work: Installing "remove hidden proxy" .cabs.
2. Didn't work: "What, exactly, are you having issues with? It's not an Exchange 2k3 incompatibility, as mine is synching fine. I did have to go into Settings > Connections > USB and turn off advanced network capabilities, though."
http://forum.xda-developers.com/showpost.php?p=1940649&postcount=1155
3. Verify the following Exchange setting (already checked): "On the Exchange server, launch Internet Services Manager. Right click on the Microsoft-Server-ActiveSync virtual directory and choose Properties. Select the Directory Security tab. Click the Edit button in the Secure Communications section and select the option to 'Ignore client certificates.'"
http://download.microsoft.com/downl...ices-Deploying_Microsoft_Mobile_Messaging.doc
4. Verify the following Exchange setting (not running Exchange 2007): "I also had trouble syncing with Exchange. I run Exchange 2007 and had to enable the option to allow the enrolment of non-supported devices in my ActiveSync policy. With WM5.0 or 6.0 it always worked flawlessly."
http://forum.xda-developers.com/showpost.php?p=1938858&postcount=1025
5: After trying kewlair's suggestion:
"The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection."
http://forum.xda-developers.com/showpost.php?p=1957501&postcount=3
...attempting to force a sync gives this. I also tried changing "Programs that automatically connect..." to My ISP with the same result:
ActiveSync tries to connect using either MEdia Net or My ISP and then says:
"Cannot Connect
Dialed: Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer's documentation and try again."
ActiveSync Reports: "Waiting for network"
Right i am pissed so i might be being a ****, but, it would help if you told us
a) what version of exchange you are running.
b) whether you are using ssl to sync with the server
c) whether you are talking about syncing when connected to the pc, over gprs or such, or both.
Rob
Yeah, I have noticed some issues as well. I'm using dutty's official 6.1 release.
The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection.
The second issue I have found is that after a while (not sure on specific time) ActiveSync just seems to stop working, almost as if it is hung up. When I go to the ActiveSync window and tap Sync, it does absolutely nothing. Basically the only way i've found to get it to start working again is doing a soft reset.
Hopefully this will help you or other people out, because it took me FOREVER to figure this out. I am curious if anybody else is having problems with ActiveSync stopping responding with 6.1 also.
Same here
Hello,
I am having the same problem here.
I am using DCS 1.5 and windows Vista (Windows Mobilde Device Center). It has been working beautifully for a week..
But now I cannot connect the device to my computer through USB. When I do the charge led is on, but the device is not seen by vista.
I checked off "enable advanced network functionnality" in the USB to PC settings.... But nada!
Any help from otehrs would be appreciated.
Juju
I'm sorry, I might not have been clear. ActiveSync on the device hangs up, not on my computer. I haven't had any issues with ActiveSync on my computer so I think this is a different issue.
rjefferis said:
Right i am pissed so i might be being a ****, but, it would help if you told us
a) what version of exchange you are running. Exchange 2003
b) whether you are using ssl to sync with the server. No SSL.
c) whether you are talking about syncing when connected to the pc, over gprs or such, or both. The PC sync works fine, but over the air it does not.
Rob
Click to expand...
Click to collapse
See answers.
kewlair said:
Yeah, I have noticed some issues as well. I'm using dutty's official 6.1 release.
The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection.
The second issue I have found is that after a while (not sure on specific time) ActiveSync just seems to stop working, almost as if it is hung up. When I go to the ActiveSync window and tap Sync, it does absolutely nothing. Basically the only way i've found to get it to start working again is doing a soft reset.
Hopefully this will help you or other people out, because it took me FOREVER to figure this out. I am curious if anybody else is having problems with ActiveSync stopping responding with 6.1 also.
Click to expand...
Click to collapse
Lots of good info there. Thanks and I will let you know if this works the next time I flash.
kewlair said:
I'm sorry, I might not have been clear. ActiveSync on the device hangs up, not on my computer. I haven't had any issues with ActiveSync on my computer so I think this is a different issue.
Click to expand...
Click to collapse
juju-35's is a different issue. I agree. I am talking about over the air sync/push. I will try to edit the thread title to be more clear.
Camp said:
juju-35's is a different issue. I agree. I am talking about over the air sync/push. I will try to edit the thread title to be more clear.
Click to expand...
Click to collapse
Sorry for the confusion, I thought you were talking USB since you mentionned the PC to USB thing. Still annoying though . I will repost in the DCS thread!
Direct push works without issues over AT&T's network on 3.0 Sleuth. My job depends on it working too. I've used it over MEdiaNet and My ISP connections although you need to be able to use my ISP to get it to work correctly (without 7minute delays). You can tell if its using the correct connection by waiting for direct push to connect after a reset then tapping on the big 3G icon. It should say its connected using My ISP (this assumes you let the connection wizard discover your provider and set you up of course).
The only difference between your settings and mine is that my email system uses SSL.
Certs aren't an issue if your exchange implementation doesn't need SSL.
I would really like to see the exact activesync error code you are getting btw.
Sleuth255 said:
Direct push works without issues over AT&T's network on 3.0 Sleuth. My job depends on it working too. I've used it over MEdiaNet and My ISP connections although you need to be able to use my ISP to get it to work correctly (without 7minute delays). You can tell if its using the correct connection by waiting for direct push to connect after a reset then tapping on the big 3G icon. It should say its connected using My ISP (this assumes you let the connection wizard discover your provider and set you up of course).
The only difference between your settings and mine is that my email system uses SSL.
Certs aren't an issue if your exchange implementation doesn't need SSL.
I would really like to see the exact activesync error code you are getting btw.
Click to expand...
Click to collapse
It also happened to me on your newest 6.1 ROM Sleuth, thanks for chiming in here. I can only work on this issue during the weekend because come Monday I have to reflash to a working 6.0 ROM. I just reflashed with Dutty's newest 6.1 ROM and here are my updates (updated in first post also):
The ActiveSync error code that I originally got with all of the 6.1 ROMs is:
Result: Synchronization could not be completed. Try again later.
Support Code: 0x80830003
After trying kewlair's suggestion:
"The first issue I had was the initial setup. I set up my account properly, but ActiveSync would report that it cannot sync at this time. I knew that I had to uncheck the Use Proxy for this Connection option to solve this issue, but I couldn't find where to get to that setting for the MEdia Net connection that was being used. I finally found it in Settings -> Connections -> Advanced Tab, then tap the Select Networks button and where it says "Programs that automatically connect..." select MEdia Net instead of My ISP and then you can tap the Edit... button and remove the proxy server selection."
I get this ActiveSync error code. I also tried changing "Programs that automatically connect..." to My ISP with the same result:
ActiveSync tries to connect using either MEdia Net or My ISP and then says:
"Cannot Connect
Dialed: Cannot connect for an unknown reason. To check your connection settings and change them if needed, tap Settings. If the problem continues, reset your mobile device according to your manufacturer's documentation and try again."
ActiveSync Reports: "Waiting for network"
Thanks for all the help so far everyone.
Anyone else have any other ideas that I can try?
Have you tried not letting the network communication run and enter the att network connections manually. Just say No to configure your network config. I have had issues with the network communications auto setup.
1) Set up My Isp to use either wap.cingular or isp.cingular (depending on you data plan) and not setup the proxy.
2) Set up the work connection as medianet to use wap.cingular with the proxy setting
3) Set up MMS connection using the correct setting and using work connection (medianet) with proxy.
It really sounds like your issue is related to the network settings. If you look up your active sync error code on google all seem to point to the ATT proxy issues.
Good Luck
All
I use push Mail and have tries Sleuths and duttys 6.1 ROM without issues
SSL based Authentication
Cheers
Mario said:
All
I use push Mail and have tries Sleuths and duttys 6.1 ROM without issues
SSL based Authentication
Cheers
Click to expand...
Click to collapse
Same for me DCS 1.5 and now 1.7 with SSL no problem at all
Everyone does not need to post that yes it does work. Mine works as well as 99% of other people. This thread is just for the OP and any others whose does not work.
Yes, It does work for 99% to 99.9% of people!
eagle 1 said:
Everyone does not need to post that yes it does work. Mine works as well as 99% of other people. This thread is just for the OP and any others whose does not work.
Yes, It does work for 99% to 99.9% of people!
Click to expand...
Click to collapse
Thx but in that case error code would help. Because not working could come from many factor.
More strange is not working config when "upgrading" from WM6 to WM6.1 with STRICTsame config...
So if people could put more details it will help
The error code indicates that your exchange server is set to use client certs btw. Here's the exact recommendation to fix:
1. On the Exchange server, launch Internet Services Manager. Right click on the Microsoft-Server-ActiveSync virtual directory and choose Properties. Select the Directory Security tab. Click the Edit button in the Secure Communications section and select the option to “Ignore client certificates.”
Click to expand...
Click to collapse
This is a server-side fix though. If you're not the IT staff that did this, then you need to get them to give you the client cert again.
your upgrade to WM6.1 caused your client side cert to disappear. The cert store on WM6.1 contains different certs in the root store as well which could cause WM6.0 to have the cert your exchange server requires but not this beta version of WM6.1.
Exchange installations which require client side certs are very rare btw which is why everybody is saying "works great here". Generally, server certs are used instead (require SSL must be checked in this case)
eagle 1 said:
Have you tried not letting the network communication run and enter the att network connections manually. Just say No to configure your network config. I have had issues with the network communications auto setup.
1) Set up My Isp to use either wap.cingular or isp.cingular (depending on you data plan) and not setup the proxy.
2) Set up the work connection as medianet to use wap.cingular with the proxy setting
3) Set up MMS connection using the correct setting and using work connection (medianet) with proxy.
It really sounds like your issue is related to the network settings. If you look up your active sync error code on google all seem to point to the ATT proxy issues.
Good Luck
Click to expand...
Click to collapse
Solved. Thanks for everybody's help on this issue. eagle 1's answer above helped me find out what was wrong.
It was a really simple solution, but I have never had to mess with any of these settings on any of my previous WM devices. The solution was: The "Connection Setup" wizard did not set up my connection settings correctly. I had to set BOTH "Programs that automatically connect..." drop down options in the advanced connection settings to MEdia Net.
Thanks again to everyone that helped out.
surprising that you got a 0x80830003 error instead of the more common 0x8500200B (failed to contact server) message
So I deleted the registry key that blocks the ATT Fuze from using "internet sharing" (HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings\ “ForceCellConnection”) and have been able to get online through USB, in fact I'm posting this while tethered.
The problem is that now, when try to use the internet on the phone itself, it always gives a gateway error 504
any idea what settings may have been changed??? Or how I get rid of error 504?? the phone connects but the internet doesnt work
I would just restore the registry through a hard reset
Do I have to unlock the phone again after a hard reset?
Internet stopped working on phone, only thing that gets online is weather from tf3d and activesync
Ok
After a hard reset, I'm back to square 1, internet explorer and opera keep getting error 504 gaateway timeout, but I'm using the phone internet sharing to post this....whats going on????
Im using an unlocked Fuze on Tmobile network using the internet2.voicestream.com APN
Am i the only one with this problem???
I thought I may have ****ed something up when I was trying to do internet sharing, I tried to sue ICScontrol app, but like I said. I did a hard reset and it still giving me gateway error 504
My email and activesync work fine, I can even get online through internet sharing....but not on the actual phone!!!
I talked to tech support and they were no help, I tried all the tmobile APNs but no luck, oddly enough the internet did work on my unlocked Iphone
What's going on?? Should I flash a new rom??
I'd be willing to bet that it's an IP address issue. I had the same symptoms after some problems with programs that automatically configured the phone's network adapters (which ICSControl does). Why a hard reset didn't fix it I can't even begin to imagine, though. My problem was that in the network adapter settings the phone was assigned a static IP on one of the adapters (I don't recall which one). I changed it to acquire an address from the server and was able to get back online.
Im still having this issue
Im connected through internet sharing right now, email works on phone and activesync works
but when i try to use a web app or browser, it times out
where can i check to "get ip from server??"
I upgraded to a newer rom and still same issue, dont know whats going on and im going crazy
someone please help
Im still having this issue
Im connected through internet sharing right now, email works on phone and activesync works
but when i try to use a web app or browser, it times out
where can i check to "get ip from server??"
I upgraded to a newer rom and still same issue, dont know whats going on and im going crazy
someone please help
sp1kez said:
where can i check to "get ip from server??"
Click to expand...
Click to collapse
Start>Settings>Connections Tab>Wi-Fi>Network Adapters Tab
Select the network adapter and select "Use server-assigned IP address".
As I said before, I don't recall which network adapter was giving me trouble. Definitely hit the wifi adapter and the NDIS adapter(s). To be honest, though, if you've done a hard reset and even changed ROMs it doesn't sound like this is your problem (unless you keep recreating the problem somehow).
Turns out it was a server side error from tmobile
I was finally able to reach an english speaking tech and he had me change the APN to the VPN service apn and just added that to my line, he said a lot of people were having this problem